r: 03030040 p: 56.665 pid: 89577 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 80A2S26I sr_no_br: 80A2S26I sr_no_br_cl: 80A2S26I sr_cl: RENOLD80A2S26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 inch; 25,4 mm Length (pin) 61,9 mm Product line Renold Blue Weight (kg/m) 5,5 kg/m Thickness (outer plate) 3,25 mm Type (ISO/ANSI) 80-2 Height 3 Inside width 15,75 mm Breaking strength 111200 N Diameter (pin) 7,94 mm Thickness (inner plate) 3,25 mm Plate height 24,13 mm Number of the connecting link 26 Version (link) Duplex n: RENOLD BLUE 80-2 No. 26 connecting link duplex 1" - 80A2S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: connecting link duplex 1" kpn: BLUE 80-2 No. 26 kpn_dash: BLUE 80 kpn_clear: BLUE802No26 bkpn: RENOLD BLUE 80-2 No. 26 bkpn_clear: RENOLD BLUE802No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 80A2S26I sr_ns: RENOLD80A2S26I
r: 02097190 p: 56.665 pid: 89528 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 80A2S11I sr_no_br: 80A2S11I sr_no_br_cl: 80A2S11I sr_cl: RENOLD80A2S11I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 inch; 25,4 mm Length (pin) 61,9 mm Product line Renold Blue Weight (kg/m) 5,5 kg/m Thickness (outer plate) 3,25 mm Type (ISO/ANSI) 80-2 Height 3 Inside width 15,75 mm Breaking strength 111200 N Diameter (pin) 7,94 mm Thickness (inner plate) 3,25 mm Plate height 24,13 mm Number of the connecting link 11 Version (link) Duplex n: RENOLD BLUE 80-2 No. 11 connecting link duplex 1" - 80A2S11I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: connecting link duplex 1" kpn: BLUE 80-2 No. 11 kpn_dash: BLUE 80 kpn_clear: BLUE802No11 bkpn: RENOLD BLUE 80-2 No. 11 bkpn_clear: RENOLD BLUE802No11 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 80A2S11I sr_ns: RENOLD80A2S11I
r: 03050169 p: 55.702 pid: 88641 b: RENOLD q: 24 st: 1 lt: 1 ean: 0673766007189 sr: RENOLD GY16B2S12I sr_no_br: GY16B2S12I sr_no_br_cl: GY16B2S12I sr_cl: RENOLDGY16B2S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 inch; 25,4 mm Thickness (inner plate) 4,12 mm Product line Renold Synergy Number of the connecting link 12 Weight (kg/m) 5,5 kg/m Length (pin) 66,8 mm Height 2,2 Thickness (outer plate) 3,1 mm Plate height 21,08 mm Type (ISO/ANSI) 16B-2 Version (link) Duplex Diameter (pin) 8,28 mm Diameter (roller) 15,88 mm Breaking strength 106000 N Inside width 17,02 mm n: RENOLD GY16B2S12I reducer SYNERGY 16b-2 - duplex 1 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: reducer SYNERGY 16b-2 - duplex 1 inch kpn: GY16B2S12I kpn_dash: kpn_clear: GY16B2S12I bkpn: RENOLD GY16B2S12I bkpn_clear: RENOLD GY16B2S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: GY16B2S12I sr_ns: RENOLDGY16B2S12I
r: 03050076 p: 55.63 pid: 87814 b: RENOLD q: 0 st: lt: 15 ean: 0673766006861 sr: RENOLD GY10B2S30I sr_no_br: GY10B2S30I sr_no_br_cl: GY10B2S30I sr_cl: RENOLDGY10B2S30I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 5/8 inch; 15,875 mm Thickness (inner plate) 1,55 mm Product line Renold Synergy Number of the connecting link 30 Weight (kg/m) 1,69 kg/m Length (pin) 35,4 mm Height 2,5 Thickness (outer plate) 1,55 mm Plate height 14,6 mm Type (ISO/ANSI) 10B-2 Version (link) Duplex Diameter (pin) 5,08 mm Diameter (roller) 10,16 mm Breaking strength 44500 N Inside width 9,65 mm n: RENOLD GY10B2S30I reducer SYNERGY 10b-2 - duplex 5/8 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: reducer SYNERGY 10b-2 - duplex 5/8 inch kpn: GY10B2S30I kpn_dash: kpn_clear: GY10B2S30I bkpn: RENOLD GY10B2S30I bkpn_clear: RENOLD GY10B2S30I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: GY10B2S30I sr_ns: RENOLDGY10B2S30I
r: 03050371 p: 54.325 pid: 88678 b: RENOLD q: 0 st: lt: 15 ean: 6623901298808 sr: RENOLD 12B2SSS12I sr_no_br: 12B2SSS12I sr_no_br_cl: 12B2SSS12I sr_cl: RENOLD12B2SSS12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/4 inch; 19,05 mm Thickness (inner plate) 1,81 mm Product line Renold Stainless Steel Number of the connecting link 12 Weight (kg/m) 2,42 kg/m Length (pin) 41,4 mm Height 2,6 Thickness (outer plate) 1,81 mm Plate height 16 mm Type (ISO/ANSI) 12B-2 Version (link) Duplex Diameter (pin) 5,72 mm Diameter (roller) 12,07 mm Breaking strength 37280 N Inside width 11,68 mm n: RENOLD 12B2SSS12I reduction link stainless steel 12b-2 - duplex 3/4 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Renold's stainless steel chain is manufactured from high-quality materials. These perform very well in environments that are acidic or alkaline, where direct contact with food is a possibility, where the chain is exposed to water, and in places with very high or low temperatures (-40 °C to +400 °C) where corrosion resistance is a requirement. Renold's stainless steel chain offers a solution when resistance to chemical reactions is crucial. FDA-approved material is used during production and is pre-lubricated with a USDA H1-approved lubricant All parts are made of austenitic, rust-resistant steel All parts receive surface treatment to remove stress concentrations Lubrication that improves wear resistance Tensile strength of approximately 65% of a standard carbon steel chain ds: dsc: kts: reduction link stainless steel 12b-2 - duplex 3/4 inch kpn: 12B2SSS12I kpn_dash: kpn_clear: 12B2SSS12I bkpn: RENOLD 12B2SSS12I bkpn_clear: RENOLD 12B2SSS12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 12B2SSS12I sr_ns: RENOLD12B2SSS12I
r: 02274428 p: 54.018 pid: 88021 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 60A2SSS26I sr_no_br: 60A2SSS26I sr_no_br_cl: 60A2SSS26I sr_cl: RENOLD60A2SSS26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/4 inch; 19,05 mm Length (pin) 48,1 mm Product line Renold Stainless Steel Weight (kg/m) 2,91 kg/m Thickness (outer plate) 2,45 mm Type (ISO/ANSI) 60-2 Height 2,6 Inside width 12,57 mm Breaking strength 60000 N Diameter (pin) 5,94 mm Thickness (inner plate) 2,45 mm Plate height 17,5 mm Number of the connecting link 26 Version (link) Duplex n: RENOLD stainless steel 60-2 No. 26 connecting link duplex 3/4" - 60A2SSS26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Renold's stainless steel chain is manufactured from high-quality materials. These perform very well in environments that are acidic or alkaline, where direct contact with food is a possibility, where the chain is exposed to water, and in places with very high or low temperatures (-40 °C to +400 °C) where corrosion resistance is a requirement. Renold's stainless steel chain offers a solution when resistance to chemical reactions is crucial. FDA-approved material is used during production and is pre-lubricated with a USDA H1-approved lubricant All parts are made of austenitic, rust-resistant steel All parts receive surface treatment to remove stress concentrations Lubrication that improves wear resistance Tensile strength of approximately 65% of a standard carbon steel chain ds: dsc: kts: connecting link duplex 3/4" kpn: stainless steel 60-2 No. 26 kpn_dash: stainless steel 60 kpn_clear: stainlesssteel602No26 bkpn: RENOLD stainless steel 60-2 No. 26 bkpn_clear: RENOLD stainlesssteel602No26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 60A2SSS26I sr_ns: RENOLD60A2SSS26I
r: 03030284 p: 53.961 pid: 89685 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD GY80A1S11I sr_no_br: GY80A1S11I sr_no_br_cl: GY80A1S11I sr_cl: RENOLDGY80A1S11I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 inch; 25,4 mm Length (pin) 23,7 mm Product line Renold Synergy Weight (kg/m) 2,8 kg/m Thickness (outer plate) 3,25 mm Type (ISO/ANSI) 80-1 Height 3 Inside width 15,75 mm Breaking strength 55600 N Diameter (pin) 7,94 mm Thickness (inner plate) 3,25 mm Plate height 24,13 mm Number of the connecting link 11 Version (link) Simplex n: RENOLD SYNERGY 80-1 S No. 11 closing link simplex 1" - GY80A1S11I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: closing link simplex 1" kpn: SYNERGY 80-1 S No. 11 kpn_dash: SYNERGY 80 kpn_clear: SYNERGY801SNo11 bkpn: RENOLD SYNERGY 80-1 S No. 11 bkpn_clear: RENOLD SYNERGY801SNo11 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: GY80A1S11I sr_ns: RENOLDGY80A1S11I
r: 03030261 p: 53.961 pid: 88094 b: RENOLD q: 0 st: lt: 15 ean: 6623900897637 sr: RENOLD GY80A1S107I sr_no_br: GY80A1S107I sr_no_br_cl: GY80A1S107I sr_cl: RENOLDGY80A1S107I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 inch Thickness (outer plate) 3,25 mm Weight (kg/m) 2,8 kg/m Height 3 Breaking strength 55600 N Length (pin) 23,7 mm Inside width 15,75 mm Diameter (pin) 7,94 mm Thickness (inner plate) 3,25 mm Plate height 24,13 mm Product line Renold Synergy Type (ISO/ANSI) 80-1 Number of the connecting link 107 Version (link) Simplex n: RENOLD Synergy 80-1 rivet link simplex 1 inch - GY80A1S107I cn: RIVETING LINK cn2: RIVETING LINK cn_clear: RIVETINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: rivet link simplex 1 inch kpn: Synergy 80-1 kpn_dash: Synergy 80 kpn_clear: Synergy801 bkpn: RENOLD Synergy 80-1 bkpn_clear: RENOLD Synergy801 c_path: Home / Drive technology / Chains and sprockets / Chains / Riveting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold riveting link sr_no_br_cl_ns: GY80A1S107I sr_ns: RENOLDGY80A1S107I
r: 02097245 p: 53.889 pid: 88167 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 40A3S12I sr_no_br: 40A3S12I sr_no_br_cl: 40A3S12I sr_cl: RENOLD40A3S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1/2 inch; 12,7 mm Thickness (inner plate) 1,55 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 1,8 kg/m Length (pin) 45,1 mm Height 2,1 Thickness (outer plate) 1,55 mm Plate height 11,2 mm Type (ISO/ANSI) 40-3 Version (link) Triplex Diameter (pin) 3,97 mm Diameter (roller) 7,92 mm Breaking strength 41700 N Inside width 7,85 mm n: RENOLD 40A3S12I reducer BLUE 40-3 - plywood 1/2 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 40-3 - plywood 1/2 inch kpn: 40A3S12I kpn_dash: kpn_clear: 40A3S12I bkpn: RENOLD 40A3S12I bkpn_clear: RENOLD 40A3S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 40A3S12I sr_ns: RENOLD40A3S12I
r: 02097252 p: 53.446 pid: 89745 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 50A3S30I sr_no_br: 50A3S30I sr_no_br_cl: 50A3S30I sr_cl: RENOLD50A3S30I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 5/8 inch; 15,875 mm Thickness (inner plate) 2,04 mm Product line Renold Blue Number of the connecting link 30 Weight (kg/m) 2,96 kg/m Length (pin) 56,5 mm Height 2,7 Thickness (outer plate) 2,04 mm Plate height 14,6 mm Type (ISO/ANSI) 50-3 Version (link) Triplex Diameter (pin) 5,08 mm Diameter (roller) 10,16 mm Breaking strength 65400 N Inside width 9,4 mm n: RENOLD 50A3S30I reducer BLUE 50-3 - plywood 5/8 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 50-3 - plywood 5/8 inch kpn: 50A3S30I kpn_dash: kpn_clear: 50A3S30I bkpn: RENOLD 50A3S30I bkpn_clear: RENOLD 50A3S30I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 50A3S30I sr_ns: RENOLD50A3S30I
r: 02097251 p: 53.446 pid: 89740 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 50A3S12I sr_no_br: 50A3S12I sr_no_br_cl: 50A3S12I sr_cl: RENOLD50A3S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 5/8 inch; 15,875 mm Thickness (inner plate) 2,04 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 2,96 kg/m Length (pin) 56,5 mm Height 2,7 Thickness (outer plate) 2,04 mm Plate height 14,6 mm Type (ISO/ANSI) 50-3 Version (link) Triplex Diameter (pin) 5,08 mm Diameter (roller) 10,16 mm Breaking strength 65400 N Inside width 9,4 mm n: RENOLD 50A3S12I reducer BLUE 50-3 - plywood 5/8 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 50-3 - plywood 5/8 inch kpn: 50A3S12I kpn_dash: kpn_clear: 50A3S12I bkpn: RENOLD 50A3S12I bkpn_clear: RENOLD 50A3S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 50A3S12I sr_ns: RENOLD50A3S12I
r: 03030130 p: 53.283 pid: 89610 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 80A2S58I sr_no_br: 80A2S58I sr_no_br_cl: 80A2S58I sr_cl: RENOLD80A2S58I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 inch; 25,4 mm Length (pin) 61,9 mm Product line Renold Blue Weight (kg/m) 5,5 kg/m Thickness (outer plate) 3,25 mm Type (ISO/ANSI) 80-2 Height 3 Inside width 15,75 mm Breaking strength 111200 N Diameter (pin) 7,94 mm Thickness (inner plate) 3,25 mm Plate height 24,13 mm Number of the connecting link 58 Version (link) Duplex n: RENOLD BLUE 80-2 No. 58 connecting link duplex 1" - 80A2S58I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: connecting link duplex 1" kpn: BLUE 80-2 No. 58 kpn_dash: BLUE 80 kpn_clear: BLUE802No58 bkpn: RENOLD BLUE 80-2 No. 58 bkpn_clear: RENOLD BLUE802No58 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 80A2S58I sr_ns: RENOLD80A2S58I
r: 02097154 p: 50.759 pid: 89767 b: RENOLD q: 0 st: lt: 15 ean: 6623901270774 sr: RENOLD 35A2S30I sr_no_br: 35A2S30I sr_no_br_cl: 35A2S30I sr_cl: RENOLD35A2S30I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/8 inch; 9,525 mm Thickness (inner plate) 1,29 mm Product line Renold Blue Number of the connecting link 30 Weight (kg/m) 0,62 kg/m Length (pin) 22,2 mm Height 1,7 Thickness (outer plate) 1,29 mm Plate height 8,6 mm Type (ISO/ANSI) 35-2 Version (link) Duplex Diameter (pin) 3,59 mm Diameter (roller) 5,08 mm Breaking strength 15800 N Inside width 4,68 mm n: RENOLD 35A2S30I reduction gear link BLUE 35-2 - duplex 3/8 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reduction gear link BLUE 35-2 - duplex 3/8 inch kpn: 35A2S30I kpn_dash: kpn_clear: 35A2S30I bkpn: RENOLD 35A2S30I bkpn_clear: RENOLD 35A2S30I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 35A2S30I sr_ns: RENOLD35A2S30I
r: 03050275 p: 50.74 pid: 90075 b: RENOLD q: 0 st: lt: 15 ean: 6623901339150 sr: RENOLD GY80A1S4I sr_no_br: GY80A1S4I sr_no_br_cl: GY80A1S4I sr_cl: RENOLDGY80A1S4I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 1 inch; 25,4 mm Diameter (pin) 7,94 mm Product line Renold Synergy Number of the connecting link 4 Weight (kg/m) 2,8 kg/m Length (pin) 23,7 mm Thickness (outer plate) 3,25 mm Inside width 15,75 mm Thickness (inner plate) 3,25 mm Height 3 Type (ISO/ANSI) 80-1 Version (link) Simplex Breaking strength 55600 N Plate height 24,13 mm Diameter (roller) 15,88 mm n: RENOLD GY80A1S4I synergy 80-1 - simplex 1 inch - inner link cn: INNER LINK cn2: INNER LINK cn_clear: INNERLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: synergy 80-1 - simplex 1 inch - inner link kpn: GY80A1S4I kpn_dash: kpn_clear: GY80A1S4I bkpn: RENOLD GY80A1S4I bkpn_clear: RENOLD GY80A1S4I c_path: Home / Drive technology / Chains and sprockets / Chains / Inner link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold inner link sr_no_br_cl_ns: GY80A1S4I sr_ns: RENOLDGY80A1S4I
r: 03030215 p: 49.674 pid: 88426 b: RENOLD q: 0 st: lt: 15 ean: 0673766010080 sr: RENOLD GY60A3S26I sr_no_br: GY60A3S26I sr_no_br_cl: GY60A3S26I sr_cl: RENOLDGY60A3S26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/4 inch; 19,05 mm Length (pin) 70,9 mm Product line Renold Synergy Weight (kg/m) 4,38 kg/m Thickness (outer plate) 2,45 mm Type (ISO/ANSI) 60A-3 Height 2,6 Inside width 12,57 mm Breaking strength 93900 N Diameter (pin) 5,94 mm Thickness (inner plate) 2,45 mm Plate height 17,5 mm Number of the connecting link 26 Version (link) Triplex n: RENOLD SYNERGY 60-3 S No. 26 closing link plywood 3/4" - GY60A3S26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: closing link plywood 3/4" kpn: SYNERGY 60-3 S No. 26 kpn_dash: SYNERGY 60 kpn_clear: SYNERGY603SNo26 bkpn: RENOLD SYNERGY 60-3 S No. 26 bkpn_clear: RENOLD SYNERGY603SNo26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: GY60A3S26I sr_ns: RENOLDGY60A3S26I
r: 03050024 p: 48.595 pid: 88193 b: RENOLD q: 0 st: lt: 15 ean: 6623901086504 sr: RENOLD 12B3S12I sr_no_br: 12B3S12I sr_no_br_cl: 12B3S12I sr_cl: RENOLD12B3S12I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/4 inch; 19,05 mm Thickness (inner plate) 1,81 mm Product line Renold Blue Number of the connecting link 12 Weight (kg/m) 3,59 kg/m Length (pin) 60,9 mm Height 2,6 Thickness (outer plate) 1,81 mm Plate height 16 mm Type (ISO/ANSI) 12B-3 Version (link) Triplex Diameter (pin) 5,72 mm Diameter (roller) 12,07 mm Breaking strength 86700 N Inside width 11,68 mm n: RENOLD 12B3S12I reducer BLUE 12b-3 - plywood 3/4 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 12b-3 - plywood 3/4 inch kpn: 12B3S12I kpn_dash: kpn_clear: 12B3S12I bkpn: RENOLD 12B3S12I bkpn_clear: RENOLD 12B3S12I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 12B3S12I sr_ns: RENOLD12B3S12I
r: 03050105 p: 48.595 pid: 88635 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 12B3S30I sr_no_br: 12B3S30I sr_no_br_cl: 12B3S30I sr_cl: RENOLD12B3S30I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/4 inch; 19,05 mm Thickness (inner plate) 1,81 mm Product line Renold Blue Number of the connecting link 30 Weight (kg/m) 3,59 kg/m Length (pin) 60,9 mm Height 2,6 Thickness (outer plate) 1,81 mm Plate height 16 mm Type (ISO/ANSI) 12B-3 Version (link) Triplex Diameter (pin) 5,72 mm Diameter (roller) 12,07 mm Breaking strength 86700 N Inside width 11,68 mm n: RENOLD 12B3S30I reducer BLUE 12b-3 - plywood 3/4 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: reducer BLUE 12b-3 - plywood 3/4 inch kpn: 12B3S30I kpn_dash: kpn_clear: 12B3S30I bkpn: RENOLD 12B3S30I bkpn_clear: RENOLD 12B3S30I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: 12B3S30I sr_ns: RENOLD12B3S30I
r: 03030055 p: 48.264 pid: 89580 b: RENOLD q: 2 st: 1 lt: 1 ean: 0673766004362 sr: RENOLD 32B1S11I sr_no_br: 32B1S11I sr_no_br_cl: 32B1S11I sr_cl: RENOLD32B1S11I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 2 inch; 50,8 mm Length (pin) 63,4 mm Product line Renold Blue Weight (kg/m) 10,1 kg/m Thickness (outer plate) 6,35 mm Type (ISO/ANSI) 32B-1 Height 8 Inside width 30,99 mm Breaking strength 250000 N Diameter (pin) 17,81 mm Thickness (inner plate) 7,11 mm Plate height 42,29 mm Number of the connecting link 11 Version (link) Simplex n: RENOLD BLUE 32B-1 No. 11 closing link simplex 2" - 32B1S11I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: Conveyor chains, like roller chains, can be made to different international standards. The main standards are: British Standard (BS): This standard applies to chains made for the British market and for markets where British presence has had a major influence on technical design and buying behaviour. This standard is based on Renold's original conveyor chain design. ISO Standard chains: Chains made to the ISO Standard are not interchangeable with chains made to the BS or DIN Standard. This standard is widely used in the European market, except in Germany. Chains made according to this standard are becoming increasingly popular and are widely used in Scandinavia. Renold has a lot of experience in producing conveyor chains. Renold's conveyor chains are based on many years of design and development, allowing us to deliver the optimal product. To ensure that this quality is reflected in the performance of our products, we carry out strict checks on: Materials Heat treatment Processes Fittings Attachment assembly Lubrication Conveyor Chain Exploded View Ultimate Renold reliability: The key to the reliability of Renold chains is consistency in design and manufacturing. The chains' maximum strength and wear resistance are achieved by strictly controlling material specification and using state-of-the-art heat treatment processes. The consistent overall tolerability of Renold chains makes them ideal for conveyor systems that require precise alignment of different chain mechanisms. The breaking load is greater than the internationally required minimum. For optimum performance, it is important to choose the right chain. Renold's experienced design team is always at your disposal for free advice on specific products and applications. Standard and Deep Link conveyor chains are available for BS4116 part 4 and for ISO 1977, with both hollow and solid pins. Extra strong standard conveyor chain: Complementing our standard range of conveyor chains to British Standard, we offer this extra strong chain suitable for conveyor applications requiring ultimate tensile strength (breaking load). Each chain has the same dimensions as its normal counterpart. For example, an extra strong chain of 11,000 kilos (24000 lbs) has the same dimensions as a normal chain of 5500 kilos (12000 lbs). This chain is frequently used to transport animal feed and unpackaged foodstuffs such as grain, corn, wheat and raw food mixtures. Most of these applications use scraper conveyor systems with large spacing between sprockets. Such systems sometimes move slowly, with little or no shock loading. ds: dsc: kts: closing link simplex 2" kpn: BLUE 32B-1 No. 11 kpn_dash: BLUE 32B kpn_clear: BLUE32B1No11 bkpn: RENOLD BLUE 32B-1 No. 11 bkpn_clear: RENOLD BLUE32B1No11 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 32B1S11I sr_ns: RENOLD32B1S11I
r: 02274308 p: 47.542 pid: 88178 b: RENOLD q: 0 st: lt: 15 ean: 0673766006458 sr: RENOLD GY06B2S30I sr_no_br: GY06B2S30I sr_no_br_cl: GY06B2S30I sr_cl: RENOLDGY06B2S30I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/8 inch; 9,525 mm Thickness (inner plate) 1,29 mm Product line Renold Synergy Number of the connecting link 30 Weight (kg/m) 0,78 kg/m Length (pin) 23 mm Height 1,3 Thickness (outer plate) 1,04 mm Plate height 8,2 mm Type (ISO/ANSI) O6B-2 Version (link) Duplex Diameter (pin) 3,28 mm Diameter (roller) 6,35 mm Breaking strength 16900 N Inside width 5,72 mm n: RENOLD GY06B2S30I reducer SYNERGY o6b-2 - duplex 3/8 inch cn: REDUCING LINK cn2: REDUCING LINK cn_clear: REDUCINGLINK d: Product description: Renold Synergy - Made to be better: The Renold Synergy has an outstanding reputation as the only, true high-performance roller chain on the market. This reputation is based not only on the years of research and testing that preceded its design, but also on the feedback from engineers around the world who have experienced and endorse the wear resistance, fatigue resistance and exceptional longevity of the Renold Synergy themselves. Improved fatigue resistance: The design of blade and connector optimises pressure distribution and fatigue performance. The Renold Synergy performs, on average, 30 per cent better than other brands under repeated shock loads and continuous heavy loads. Fatigue Comp Better wear resistance: Independent tests show that the Renold Synergy performs up to six times better than the competition's highest performance chain. Made to perform: Every part of Renold Synergy precisely engineered using state-of-the-art development methods such as Finite Element Analysis (FEA). It all contributes to chain performance that is more than the sum of its parts. Wide range of sizes: Renold Synergy chain is available in British Standard dimensions from 06B to 24B in simplex, duplex and triplex construction. In addition, ANSI Standard sizes are available from 35 to 160 in simplex, duplex and triplex construction. Scale shape: High blade profile for improved stress distribution; maximised blade thickness within the limitations of the standard. Bushings: Solid extruded bushings deliver improved roundness and strength compared to rolled bushings. Chamfered ends improve the bearing section and extend service life. Hole quality: 'Triple punch holing' techniques ensure correct pin and bushing position for even wear. Fixed fit: Optimised to ensure maximum service life. Fatigue resistance: Prestressed surfaces increase fatigue resistance. Wear resistance: Chamfered parts and special surface coating of the pin increase wear resistance. Connecting link: Has a unique design that ensures that all parts of the chain system are equally strong. ds: dsc: kts: reducer SYNERGY o6b-2 - duplex 3/8 inch kpn: GY06B2S30I kpn_dash: kpn_clear: GY06B2S30I bkpn: RENOLD GY06B2S30I bkpn_clear: RENOLD GY06B2S30I c_path: Home / Drive technology / Chains and sprockets / Chains / Reducing link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold reducing link sr_no_br_cl_ns: GY06B2S30I sr_ns: RENOLDGY06B2S30I
r: 03030591 p: 47.329 pid: 87770 b: RENOLD q: 0 st: lt: 15 ean: sr: RENOLD 60A2SNS26I sr_no_br: 60A2SNS26I sr_no_br_cl: 60A2SNS26I sr_cl: RENOLD60A2SNS26I sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Pitch 3/4 inch; 19,05 mm Length (pin) 49,8 mm Product line Renold Syno Weight (kg/m) 3,4 kg/m Thickness (outer plate) 2,45 mm Type (ISO/ANSI) 60-2 Height 2,5 Inside width 12,57 mm Breaking strength 62600 N Diameter (pin) 5,95 mm Thickness (inner plate) 3,23 mm Plate height 17,5 mm Number of the connecting link 26 Version (link) Duplex n: RENOLD SYNO 60-2 SN No. 26 connecting link duplex 3/4" - 60A2SNS26I cn: CONNECTING LINK cn2: CONNECTING LINK cn_clear: CONNECTINGLINK d: Product description: The Renold Syno nickel-plated chain is ideal for use in applications where hygiene is paramount and lubricant contamination must be avoided. The sintered canister contains a food industry-approved lubricant, which means the chain almost never needs re-lubrication. The roller's coating is also suitable for use in the food industry; a unique feature for any chain. Available in packaged lengths of 3.05 m (10 feet) from 06B to 24B and ANSI 40 to ANSI 100, simplex and duplex with a standard pin diameter. The Renold Syno nickel-plated chain is dimensionally interchangeable with a standard roller chain and even compatible with standard sprockets. The Syno nickel-plated chain offers the excellent wear and fatigue resistance you would expect from a Renold chain and outlasts competitors' products touted as requiring little or no lubrication. The chain has been extensively tested and trialled by major companies in the food industry. If you need to operate with minimal lubrication but don't want to compromise on quality, we can increase your productivity, reduce downtime and save you time and money. Key features: Normally no lubrication required The outside of the chain is completely dry to the touch Nickel-plated links Lubricant in the sintered bushings approved for the food industry Unique roller coating approved for the food industry Dimensionally interchangeable with standard chains Pin diameter with ISO standard, therefore standard fixings to locking links Available in packaged lengths of 3.05 m (10 ft) from 06B to 24B and ANSI 40 to ANSI 100 ds: dsc: kts: connecting link duplex 3/4" kpn: SYNO 60-2 SN No. 26 kpn_dash: SYNO 60 kpn_clear: SYNO602SNNo26 bkpn: RENOLD SYNO 60-2 SN No. 26 bkpn_clear: RENOLD SYNO602SNNo26 c_path: Home / Drive technology / Chains and sprockets / Chains / Connecting link | Home / Our brands / Renold / Renold drive technology / Renold chains and sprockets / Renold chains / Renold connecting link sr_no_br_cl_ns: 60A2SNS26I sr_ns: RENOLD60A2SNS26I
