r: 01900012 p: 1289.917 pid: 80460 b: SKF q: 0 st: lt: 8 ean: 7316572459485 sr: SKF TMMA 100H sr_no_br: TMMA 100H sr_no_br_cl: TMMA100H sr_cl: SKFTMMA100H sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Max. width 75 mm Number of hooks 3 Hydraulical Yes Max. height 250 mm n: SKF TMMA 100H EasyPull hydraulic puller 75-250mm 250mm 100kN cn: PULLER cn2: PULLER cn_clear: PULLER d: Product description The SKF EasyPull TMMA 100H is one of the most user-friendly and safest bearing dismounting tools on the market. It is very robust and ergonomically designed and features spring-operated arms that enable the user to position the puller behind the component with just one movement. The TMMA 100H is hydraulically assisted and effortless reaches withdrawal forces up to 100 kN for components with a maximum outer diameter of 250 mm (9.8 in). Integrated, ready-to-use hydraulic cylinder, pump and puller - assembly-free and no purchase of additional parts Safety valve prevents spindles and pullers from being overloaded if excessive force is applied The spring-loaded centre point on the hydraulic spindle allows easy centring of the puller on the shaft without damaging the shaft Unique red rings spring-operated opening mechanism allow the TMMA 100H to be placed behind the component with just one movement Self-centring capability and nosepiece help to avoid damage to shaft Supplied with extension pieces and one nosepiece ds: dsc: Scope of delivery 1x Puller TMMA 100H 1x Mounted hydraulic spindle TMHS 100 3x Spindle extension pieces, 1x Nose piece, 1x Handle, 1x Handle rod 1x Printed instructions for use kts: EasyPull hydraulic puller 75-250mm 250mm 100kN kpn: TMMA 100H kpn_dash: kpn_clear: TMMA100H bkpn: SKF TMMA 100H bkpn_clear: SKF TMMA100H c_path: Home / Tools / Hand tools / Pullers / Pullers / Puller | Home / Our brands / Skf / Skf tools / Skf hand tools / Skf pullers / Skf pullers / Skf puller sr_no_br_cl_ns: TMMA100H sr_ns: SKFTMMA100H
r: 41231067 p: 1242.479 pid: 37597 b: KUKKO q: 0 st: lt: 6 ean: 4021176850684 sr: KUKKO 12-5 sr_no_br: 12-5 sr_no_br_cl: 125 sr_cl: KUKKO125 sr_dash: KUKKO 12 sold: 0 p_range: none type: standard act: 1 avo: 1 av: Max. width 350 mm Number of hooks 3 Hydraulical No Max. height 275 mm n: KUKKO 12-5 three-arm puller pre-adjustable 350x275mm cn: PULLER cn2: PULLER cn_clear: PULLER d: Product description The 3-arm puller with pre-adjustable pulling hooks for inside pull and outside pull is used for pulling bearings, gears, discs, etc. in all common sizes for Craft, workshop and Industry. It can be used to loosen any part that either sits on a shaft and is freely accessible from the outside, or lies on the inside and thus needs to be pulled differently. The models are equipped with one hook support each on the inside and on the outside, allowing them to be used both for external and internal pulling. Application For inside pulling and outside pulling, used for pulling bearings, gears, discs, etc. in all common sizes for Crafts, Workshop and Industry. ds: dsc: Scope of delivery 12-3-8:Wrench for "Alligator" 12-3, 12-5, 12-4 12-4-T:Bridge for 3-arm tractor with pre-adjustable drawbar hooks 12-4, 12-5 12-5-206:Traverseninnenbuchsen with spindle for 3-armed tractors "Alligator" with pre-adjustable drawbar hooks 12-5 12-5-275-E:Towing hooks for 12 series (each) 626500:Spindle Ø 26.441 mm for spindle Thread G 3/4" / 14, 500 mm length, 5.4 mm Screw thread kts: three-arm puller pre-adjustable 350x275mm kpn: 12-5 kpn_dash: 12 kpn_clear: 125 bkpn: KUKKO 12-5 bkpn_clear: KUKKO 125 c_path: Home / Tools / Hand tools / Pullers / Pullers / Puller | Home / Our brands / Kukko / Kukko tools / Kukko hand tools / Kukko pullers / Kukko pullers / Kukko puller sr_no_br_cl_ns: 125 sr_ns: KUKKO12-5
r: 01901500 p: 1239.834 pid: 79055 b: SKF q: 0 st: lt: 10 ean: 7316571908755 sr: SKF TMMS 260 sr_no_br: TMMS 260 sr_no_br_cl: TMMS260 sr_cl: SKFTMMS260 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: For diameter 90-260 mm n: SKF TMMS 260 three-part pull plate cn: BEARING SEPARATOR cn2: BEARING SEPARATOR cn_clear: BEARINGSEPARATOR d: Product description The tri-section pulling plate TMMS 260 is especially designed for use in combination with three-armed bearing pullers. The plate grips behind the inner ring of the bearing and prevents the pulling forces from being transmitted through the bearing, minimising the risk of bearing damage. Efficient bearing dismounting with unique design to direct dismounting forces directly to the bearing inner ring No bearing damage from dismounting forces that go through the bearing outer ring and rolling elements Even force distribution revents bearing bearing locking or tilting during dismounting Wig shape allows the plates to be easily inserted between bearing and the shoulder on the shaft Suitable for use in combination with any three-armed bearing puller ds: dsc: kts: three-part pull plate kpn: TMMS 260 kpn_dash: kpn_clear: TMMS260 bkpn: SKF TMMS 260 bkpn_clear: SKF TMMS260 c_path: Home / Tools / Hand tools / Pullers / Pullers / Bearing separator | Home / Our brands / Skf / Skf tools / Skf hand tools / Skf pullers / Skf pullers / Skf bearing separator sr_no_br_cl_ns: TMMS260 sr_ns: SKFTMMS260
r: 41230017 p: 1151.95 pid: 37869 b: KUKKO q: 0 st: lt: 6 ean: 4021176005626 sr: KUKKO 10-A sr_no_br: 10-A sr_no_br_cl: 10A sr_cl: KUKKO10A sr_dash: KUKKO 10 sold: 0 p_range: none type: standard act: 1 avo: 1 av: Max. width 250 mm Puller type Wheel hub puller Number of hooks 6 Hydraulical Yes Max. height 150 mm n: KUKKO 10-A hydraulic wheel hitch set + case 250mm cn: PULLER cn2: PULLER cn_clear: PULLER d: Product description The hydraulic hub puller is used to pull wheel hubs at car and Truck. That Vethydraulic spindle reaches a pulling force of 20 t. Up to six towing hooks can be deployed on the partial disc, making the tractor universally deployable. In addition, the draw hooks can be set to two different lengths. The 22-piece set contains: a sub-disc, six draw hooks, twelve inserts in different sizes, a hydraulic spindle and two pressure pieces. Application For pulling wheel hubs on car and Truck. ds: dsc: Scope of delivery 10-1:Hydraulic press for hydraulic hub taker 10-A, 10-G 10-3:Split disc for hydraulic hub taker 10-A, 10-G 10-5:Split disc for hydraulic hub adapter 10-M, 10-A, 10-G 10-6:Tow hooks for series 10 10-ERS:Repair for hydraulic hub axle 10-A, 10-G 810-017:Pressure piece 35 mm for 10 810-117:Pressure piece 80 mm for 10 kts: hydraulic wheel hitch set + case 250mm kpn: 10-A kpn_dash: 10 kpn_clear: 10A bkpn: KUKKO 10-A bkpn_clear: KUKKO 10A c_path: Home / Tools / Hand tools / Pullers / Pullers / Puller | Home / Our brands / Kukko / Kukko tools / Kukko hand tools / Kukko pullers / Kukko pullers / Kukko puller sr_no_br_cl_ns: 10A sr_ns: KUKKO10-A
r: 01900266 p: 1139.834 pid: 80539 b: SKF q: 0 st: lt: 11 ean: 7316577311337 sr: SKF TMMP 10 sr_no_br: TMMP 10 sr_no_br_cl: TMMP10 sr_cl: SKFTMMP10 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Max. width 223 mm Number of hooks 3 Hydraulical No Max. height 207 mm n: SKF TMMP 10 heavy-duty bearing puller 100-223mm 207mm 100kN cn: PULLER cn2: PULLER cn_clear: PULLER d: Product description The SKF Heavy Duty Jaw Puller TMMP 10 is a mechanical three arm puller that is designed for dismounting bearings. The puller is characterised by its unique pantograph arm system that gives eXceptional grip and helps to counteract misalignment during dismounting operations. The puller is designed for easy, fast and safe dismounting jobs of bearings and similar components with interference fit on the shaft. Fast, efficient and smooth handling Unique pantograph system gives eXceptional grip and helps counteract misalignment during operation The three arm TMMP 10 jaw puller has a maXimum withdrawl force of up to 100 kN (11.2 US ton) Blackened, high quality steel for corrosion resistance Optional arms available for different arm lenths ds: dsc: Scope of delivery 1x Puller TMMP 10 1x Printed instructions for use kts: heavy-duty bearing puller 100-223mm 207mm 100kN kpn: TMMP 10 kpn_dash: kpn_clear: TMMP10 bkpn: SKF TMMP 10 bkpn_clear: SKF TMMP10 c_path: Home / Tools / Hand tools / Pullers / Pullers / Puller | Home / Our brands / Skf / Skf tools / Skf hand tools / Skf pullers / Skf pullers / Skf puller sr_no_br_cl_ns: TMMP10 sr_ns: SKFTMMP10
r: 02302284 p: 1098.512 pid: 51361 b: GEDORE q: 0 st: lt: 8 ean: 4010886944202 sr: GEDORE 2546582 sr_no_br: 2546582 sr_no_br_cl: 2546582 sr_cl: GEDORE2546582 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Max. width 640 mm Hydraulical Yes Max. height 75 mm Number of hooks 3 Puller type Universel puller n: GEDORE 1.07/4A1-B-HSP3 universal tractor, hydraulic, 3-arm, all-steel hook with hook brake - 2546582 cn: PULLER cn2: PULLER cn_clear: PULLER d: Product description Industrial quality, 3 arms for optimum load distribution, tilt-proof and material-friendly Strong, ergonomically shaped traverse Hook red-hot fall extension All-steel hooks positively connected to the crossbeam With patented hook brake - quick adjustment and secure attachment of hooks, at the push of a button Can be used as an internal trigger by moving the hooks Hydraulic spindle with hardened surface, wear-resistant Spindle remains smooth and clean - no need for greasing or oiling Cross section can be combined with other spindle/hook designs and lengths from the GEDORE puller kit Safety note Controlled removal is only guaranteed when using a torque spanner ds: dsc: kts: universal tractor, hydraulic, 3-arm, all-steel hook with hook brake kpn: 1.07/4A1-B-HSP3 kpn_dash: 1.07/4A1 kpn_clear: 1074A1BHSP3 bkpn: GEDORE 1.07/4A1-B-HSP3 bkpn_clear: GEDORE 1074A1BHSP3 c_path: Home / Tools / Hand tools / Pullers / Pullers / Puller | Home / Our brands / Gedore / Gedore tools / Gedore hand tools / Gedore pullers / Gedore pullers / Gedore puller sr_no_br_cl_ns: 2546582 sr_ns: GEDORE2546582
r: 41294217 p: 1089.09 pid: 99184 b: FACOM q: 0 st: lt: 8 ean: 3148510753508 sr: FACOM U.320 sr_no_br: U.320 sr_no_br_cl: U320 sr_cl: FACOMU320 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Max. width 250 mm Max. height 400 mm Hydraulical No Supplier warranty FACOM - Lifetime (E) n: FACOM U.320 large-capacity outdoor tractor 20t cn: PULLER cn2: PULLER cn_clear: PULLER d: Product description Large-capacity exterior puller 20T Features Multifunctional: mounting of 2 or 3 jaws. Ease of use: trigger with self-locking jaws by means of a reset spring. The trigger remains in its position on the roller bearing even without tension. Safety: the jaws are held in position on the roller bearing by a knurled wheel. The trigger cannot detach from the roller bearing. The spindle is supplied with an extension piece: U.320-14. Adjustable attachment: hydraulic jack UWG.320. To use the jack, the screw UWG.320-H01 and the hydraulic pump UWP.10M are required. The hydraulic auger is mounted only with 3 jaws. ds: dsc: kts: large-capacity outdoor tractor 20t kpn: U.320 kpn_dash: kpn_clear: U320 bkpn: FACOM U.320 bkpn_clear: FACOM U320 c_path: Home / Tools / Hand tools / Pullers / Pullers / Puller | Home / Our brands / Facom / Facom tools / Facom hand tools / Facom pullers / Facom pullers / Facom puller sr_no_br_cl_ns: U320 sr_ns: FACOMU.320
r: 02302283 p: 1084.132 pid: 51427 b: GEDORE q: 0 st: lt: 8 ean: 4036976126051 sr: GEDORE 2546574 sr_no_br: 2546574 sr_no_br_cl: 2546574 sr_cl: GEDORE2546574 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Max. width 530 mm Hydraulical Yes Max. height 75 mm Number of hooks 3 Puller type Universel puller n: GEDORE 1.07/41-B-HSP3 universal tractor, hydraulic, 3-arm, all-steel hook with hook brake - 2546574 cn: PULLER cn2: PULLER cn_clear: PULLER d: Product description Industrial quality, 3 arms for optimum load distribution, tilt-proof and material-friendly Strong, ergonomically shaped traverse Hook red-hot fall extension All-steel hooks positively connected to the crossbeam With patented hook brake - quick adjustment and secure attachment of hooks, at the push of a button Can be used as an internal trigger by moving the hooks Hydraulic spindle with hardened surface, wear-resistant Spindle remains smooth and clean - no need for greasing or oiling Cross section can be combined with other spindle/hook designs and lengths from the GEDORE puller kit Safety note Controlled removal is only guaranteed when using a torque spanner ds: dsc: kts: universal tractor, hydraulic, 3-arm, all-steel hook with hook brake kpn: 1.07/41-B-HSP3 kpn_dash: 1.07/41 kpn_clear: 10741BHSP3 bkpn: GEDORE 1.07/41-B-HSP3 bkpn_clear: GEDORE 10741BHSP3 c_path: Home / Tools / Hand tools / Pullers / Pullers / Puller | Home / Our brands / Gedore / Gedore tools / Gedore hand tools / Gedore pullers / Gedore pullers / Gedore puller sr_no_br_cl_ns: 2546574 sr_ns: GEDORE2546574
r: 01901666 p: 1059.834 pid: 80714 b: SKF q: 0 st: lt: 8 ean: 7316572459478 sr: SKF TMMA 75H sr_no_br: TMMA 75H sr_no_br_cl: TMMA75H sr_cl: SKFTMMA75H sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Max. width 200 mm Number of hooks 3 Hydraulical Yes Max. height 200 mm n: SKF TMMA 75H EasyPull hydraulic puller 52-200mm 200mm 75kN cn: PULLER cn2: PULLER cn_clear: PULLER d: Product description The SKF EasyPull TMMA 75H is one of the most user-friendly and safest bearing dismounting tools on the market. It is very robust and ergonomically designed and features spring-operated arms that enable the user to position the puller behind the component with just one movement. The TMMA 75H is hydraulically assisted and effortless reaches withdrawal forces up to 75 kN for components with a maximum outer diameter of 200 mm (7.8 in). Integrated, ready-to-use hydraulic cylinder, pump and puller - assembly-free and no purchase of additional parts Safety valve prevents spindles and pullers from being overloaded if excessive force is applied The spring-loaded centre point on the hydraulic spindle allows easy centring of the puller on the shaft without damaging the shaft Unique red rings spring-operated opening mechanism allow the TMMA 75H to be placed behind the component with just one movement Self-centring capability and nosepiece help to avoid damage to shaft Supplied with extension pieces and one nosepiece ds: dsc: Scope of delivery 1x Puller TMMA 75H 1x Mounted hydraulic spindle TMHS 75 2x Spindle extension pieces, 1x Nose piece, 1x Handle, 1x Handle rod 1x Printed instructions for use kts: EasyPull hydraulic puller 52-200mm 200mm 75kN kpn: TMMA 75H kpn_dash: kpn_clear: TMMA75H bkpn: SKF TMMA 75H bkpn_clear: SKF TMMA75H c_path: Home / Tools / Hand tools / Pullers / Pullers / Puller | Home / Our brands / Skf / Skf tools / Skf hand tools / Skf pullers / Skf pullers / Skf puller sr_no_br_cl_ns: TMMA75H sr_ns: SKFTMMA75H
r: 41231045 p: 1033.93 pid: 37587 b: KUKKO q: 0 st: lt: 5 ean: 4021176729348 sr: KUKKO 11-0-A4 sr_no_br: 11-0-A4 sr_no_br_cl: 110A4 sr_cl: KUKKO110A4 sr_dash: KUKKO 11 sold: 0 p_range: none type: standard act: 1 avo: 1 av: Max. width 375 mm Number of hooks 3 Hydraulical No Max. height 400 mm n: KUKKO 11-0-A4 tractor universal with three arms 375x400 cn: PULLER cn2: PULLER cn_clear: PULLER d: Product description The extra powerful, 3-arm universal puller is used for pulling heavy bearings, gears and discs in all common sizes for Craft, workshop and Industry. Allows the release of any part that is on a shaft and freely accessible from outside. Equipped with robust and adjustable Standard Towing Hooks, the solid construction of the puller ensures powerful, damage-free Dismantling both when pulling out and pulling in. The 3-arm design guarantees even load distribution and therefore a particularly secure grip on the part to be pulled. Application For pulling heavy bearings, gears and discs in all common sizes for crafts, workshop and industry. ds: dsc: Scope of delivery 11-0-20:Bushing for powerful pullers 11-0-206:Transverse bark inner bushing with spindle for extra powerful, 3-arm pullers 11-0-A, 11-0-A3, 11-0-A4, 11-0-A5, 11-0-AV 11-0-T:3-arm drawbar 30-30+B, 30-30-B, 11-0-A, 11-0-A3, 11-0-A4, 11-0-A5, 11-0-AV, 11-0-B, 11-0-BV, 30-30+, 30-30, 30-4 3-400-S:Standard tow-bars (set, clamping depth 400 mm) 633370:Double-sided spindle tip for Mechanical pressure spindles G1", G1.1/8" 633400:Spindle Ø 33.249 mm for spindle Thread G 1" / 11, 400 mm length, 6.9 mm Screw thread kts: tractor universal with three arms 375x400 kpn: 11-0-A4 kpn_dash: 11 kpn_clear: 110A4 bkpn: KUKKO 11-0-A4 bkpn_clear: KUKKO 110A4 c_path: Home / Tools / Hand tools / Pullers / Pullers / Puller | Home / Our brands / Kukko / Kukko tools / Kukko hand tools / Kukko pullers / Kukko pullers / Kukko puller sr_no_br_cl_ns: 110A4 sr_ns: KUKKO11-0-A4
r: 41231044 p: 1003.15 pid: 37724 b: KUKKO q: 0 st: lt: 5 ean: 4021176729263 sr: KUKKO 11-0-A3 sr_no_br: 11-0-A3 sr_no_br_cl: 110A3 sr_cl: KUKKO110A3 sr_dash: KUKKO 11 sold: 0 p_range: none type: standard act: 1 avo: 1 av: Max. width 375 mm Number of hooks 3 Hydraulical No Max. height 300 mm n: KUKKO 11-0-A3 tractor universal with three arms 375x300 cn: PULLER cn2: PULLER cn_clear: PULLER d: Product description The extra powerful, 3-arm universal puller is used for pulling heavy bearings, gears and discs in all common sizes for Craft, workshop and Industry. Allows the release of any part that is on a shaft and freely accessible from outside. Equipped with robust and adjustable Standard Towing Hooks, the solid construction of the puller ensures powerful, damage-free Dismantling both when pulling out and pulling in. The 3-arm design guarantees even load distribution and therefore a particularly secure grip on the part to be pulled. Application For pulling heavy bearings, gears and discs in all common sizes for crafts, workshop and industry. ds: dsc: Scope of delivery 11-0-20:Bushing for powerful pullers 11-0-206:Transverse bark inner bushing with spindle for extra powerful, 3-arm pullers 11-0-A, 11-0-A3, 11-0-A4, 11-0-A5, 11-0-AV 11-0-T:3-arm bridge 30-30+B, 30-30-B, 11-0-A, 11-0-A3, 11-0-A4, 11-0-A5, 11-0-AV, 11-0-B, 11-0-BV, 30-30+, 30-30, 30-4 3-300-S:Standard tow bar (set, clamping depth 300 mm) 633370:Double-sided spindle tip for Mechanical pressure spindles G1", G1.1/8" 633400:Spindle Ø 33.249 mm for spindle Thread G 1" / 11, 400 mm length, 6.9 mm Screw thread kts: tractor universal with three arms 375x300 kpn: 11-0-A3 kpn_dash: 11 kpn_clear: 110A3 bkpn: KUKKO 11-0-A3 bkpn_clear: KUKKO 110A3 c_path: Home / Tools / Hand tools / Pullers / Pullers / Puller | Home / Our brands / Kukko / Kukko tools / Kukko hand tools / Kukko pullers / Kukko pullers / Kukko puller sr_no_br_cl_ns: 110A3 sr_ns: KUKKO11-0-A3
r: 01994041 p: 979.834 pid: 163936 b: SKF q: 0 st: lt: 8 ean: 7316572298428 sr: SKF TMHP 10E sr_no_br: TMHP 10E sr_no_br_cl: TMHP10E sr_cl: SKFTMHP10E sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Hydraulical Yes n: SKF TMHP 10E hydraulic bearing puller set in case cn: PULLER cn2: PULLER cn_clear: PULLER d: Product description The TMHP 10E is a complete puller kit for bearing dismounting. The kit includes three different arm sets that can be used in a 2-arm or 3-arm configuration. The puller uses a hydraulic spindle for easy dismounting with dismounting forces up to 100 kN (11.2 US ton). With a stroke of 80 mm (3.1 in.), the spindle facilitates dismounting in one operation. Safety is supported through a self-locking arms that reduce puller slippage under load, a spring-loaded centre point to enable easy spindle centring and a safety valve to prevent puller overload. Versatile kit with three different arm lengths usable in 2-arm or 3-arm configuration Effortless dismounting with hydraulic spindle Self-locking arms minimise risks of slippage under load Spring-loaded centre point allows easy puller centring Supplied with three hydraulic spindle extension pieces to allow quick adaptation to required pulling length Hydraulic spindle is equipped with safety valve to prevent puller overload ds: dsc: Scope of delivery 1 x arm-assembly stand 3 x arms, set 1 (TMHP 10E-10) 3 x arms, set 2 (TMHP 10E-11) 3 x arms, set 3 (TMHP 10E-12) 1 x hydraulic spindle TMHS 100 (with handle bar) 3 x extension pieces for hydraulic spindle: 50, 100, 150 mm 1 x nosepiece with centre point for hydraulic spindle IFU QR Code card Case kts: hydraulic bearing puller set in case kpn: TMHP 10E kpn_dash: kpn_clear: TMHP10E bkpn: SKF TMHP 10E bkpn_clear: SKF TMHP10E c_path: Home / Tools / Hand tools / Pullers / Pullers / Puller | Home / Our brands / Skf / Skf tools / Skf hand tools / Skf pullers / Skf pullers / Skf puller sr_no_br_cl_ns: TMHP10E sr_ns: SKFTMHP10E
r: 02302282 p: 974.71 pid: 53095 b: GEDORE q: 0 st: lt: 8 ean: 4036976126020 sr: GEDORE 2546558 sr_no_br: 2546558 sr_no_br_cl: 2546558 sr_cl: GEDORE2546558 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Max. width 640 mm Hydraulical No Max. height 200 mm Number of hooks 3 Puller type Universel puller n: GEDORE 1.07/4A1-B universal puller 3-armed, all-steel hook with hook brake 580x200 mm - 2546558 cn: PULLER cn2: PULLER cn_clear: PULLER d: Product description Industrial quality, 3 arms for optimum load distribution, tilt-proof and material-friendly Strong, ergonomically shaped traverse Hook red-hot fall extension All-steel hooks positively connected to the crossbeam With patented hook brake - quick adjustment and secure attachment of hooks, at the push of a button Can be used as an internal trigger by repositioning the hooks Nitrocarbonised spindle surface, wear-resistant and corrosion-proof Spindle remains smooth and clean - no need for greasing or oiling Cross section can be combined with other spindle/hook designs and lengths from the GEDORE puller kit ds: dsc: kts: universal puller 3-armed, all-steel hook with hook brake 580x200 mm kpn: 1.07/4A1-B kpn_dash: 1.07/4A1 kpn_clear: 1074A1B bkpn: GEDORE 1.07/4A1-B bkpn_clear: GEDORE 1074A1B c_path: Home / Tools / Hand tools / Pullers / Pullers / Puller | Home / Our brands / Gedore / Gedore tools / Gedore hand tools / Gedore pullers / Gedore pullers / Gedore puller sr_no_br_cl_ns: 2546558 sr_ns: GEDORE2546558
r: 41230152 p: 971.859 pid: 38108 b: KUKKO q: 0 st: lt: 6 ean: 4021176075834 sr: KUKKO 18-5 sr_no_br: 18-5 sr_no_br_cl: 185 sr_cl: KUKKO185 sr_dash: KUKKO 18 sold: 0 p_range: none type: standard act: 1 avo: 1 av: Min. width 150 mm; 5 7/8 inch Min. height 225 mm; 8 7/8 inch Max. height 400 mm; 15 3/4 Max. load 20 t Max. tightening torque 500 Nm For model 15-5 Max. width 440 mm; 17 3/8 inch n: KUKKO 18-5 extractor for 15-5, 140 to 440 mm cn: PULLER AID cn2: PULLER AID cn_clear: PULLERAID d: Product description Series 18 auxiliary tractors are used together with Series 15 and 17 slurry tractors to pull off flat adjoining or thin-walled Parts in Crafts, Industry and Workshop, when insufficient space is available for towing hooks. The process of Separating Pulling is capable of gently separating those Parts first, before they can be pulled off from outside. For accurate adjustment, a scale with number values is located above the Bridge. At the bottom of the pulling bolts is a key area for safely connecting or loosening joints or components. Application For pulling flat-lying or thin-walled Parts in Craft, Industry and workshop. ds: dsc: Scope of delivery 018530:Pull bolt for auxiliary pullers 18-5, 15-E, 18-5-B 18-5-20:Bushing for powerful auxiliary tractors 18-5-T:Bridge for auxiliary tractors 18-5, 18-5-B, 15-E 633370:Double-sided spindle tip for Mechanical pressure spindles G1", G1.1/8" 637500:Spindle Ø 37.897 mm for spindle Thread G1" 1/8, 500 mm length, 6.9 mm Screw thread 637600:Spindle Ø 37.897 mm for spindle Thread 1.1/8", 600 mm length, 6.9 mm Screw thread kts: extractor for 15-5, 140 to 440 mm kpn: 18-5 kpn_dash: 18 kpn_clear: 185 bkpn: KUKKO 18-5 bkpn_clear: KUKKO 185 c_path: Home / Tools / Hand tools / Pullers / Pullers / Puller aid | Home / Our brands / Kukko / Kukko tools / Kukko hand tools / Kukko pullers / Kukko pullers / Kukko puller aid sr_no_br_cl_ns: 185 sr_ns: KUKKO18-5
