Product Description:
- Phantom HSS Hand Taps ISO 529 Metric Coarse set of 3 pieces
- ISO 529, 60°
Supplier number:
PHANTOM 211000300
|
EAN
8716563251200
38.24
tax incl.
€31.60 excl. VAT (incl. all environmental contributions)
Accurate thread cutting with Phantom
Practical benefits- Stepwise cutting control: The 3-piece set divides the cutting load across three stages, helping you cut clean metric threads manually without binding.
- Durable HSS construction: High-speed steel construction gives you consistent wear resistance and extended tool life when working in diverse metals.
- Standardized ISO 529 profile: The precise 0.5 mm pitch ensures you create perfectly matched M3 internal threads every single time.
In a nutshell
The right choise forWith the Phantom 21.100 hand tap set, you create clean and precise internal metric M3 screw threads with a 0.5 mm pitch conforming to iso 529. This 3-piece sequential set includes a taper, intermediate, and finishing tap, evenly distributing the cutting load to reduce resistance and prevent tool breakage. Manufactured from durable HSS, it provides reliable wear resistance when working in unalloyed and low-alloy steels, non-ferrous metals, and plastics up to 900 N/mm². Ideal for cutting through or blind holes after pre-drilling with a 2.5 mm drill bit, or for cleaning and restoring damaged threads, this set ensures dependable, accurate results.
Product information
Key features according to our expert
- Thread type: Metric
- Quantity per set: 3
- Pitch: 0,5 mm
All Features
- Thread type
- Metric
- Quantity per set
- 3
- Pitch
- 0,5 mm
- Tolerance d1 (tol. d1)
- ISO 2 / 6H
- Pitch (p)
- 0,5 mm
- Total length (l1)
- 48 mm
- Tool material
- HSS
- Flute length (l2)
- 11 mm
- Thread diameter (d1)
- M3
- Square wide (sw)
- 2,5 mm
- Cutting direction
- Right
- Surface
- Bright
- Shank ø (d2)
- 3,15 mm
- Shank type
- Straight shank with square
- Standard
- ISO 529
- Pre-drilling diameter (ø)
- 2,5 mm
- Brand PHANTOM
- EAN 8716563251200
- Supplier number PHANTOM 211000300
Frequently asked questions about this product
Answered by specialists
- What is included in this 3-piece hand tap set?
- The set contains 3 HSS hand taps conforming to ISO 529: a taper, intermediate, and plug/finishing tap to cut metric M3x0.5 thread in stages.
- What pilot hole diameter is required before tapping?
- For this metric M3 thread with a 0.5 mm pitch, pre-drill the hole using a 2.5 mm drill bit.
- What are the shank dimensions of these taps?
- The taps feature a 3.15 mm cylindrical shank and a 2.5 mm square drive for use in a tap wrench.
- Which materials can be tapped with this HSS set?
- This set is suitable for manual internal threading in unalloyed and low-alloy steels, non-ferrous metals, and plastics up to 900 N/mm².
- Can these taps be used for both through and blind holes?
- Yes, the three-step cutting design allows controlled thread creation in through holes and near the bottom of blind holes.
Questions about this product?
Our product specialists are happy to help with any questions about this range. Call, email or chat with us!
Chat with us