r: 03194270 p: 40.73 pid: 38681 b: PFERD q: 0 st: lt: 8 ean: 4007220808382 sr: PFERD 43200022 sr_no_br: 43200022 sr_no_br_cl: 43200022 sr_cl: PFERD43200022 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 15 mm Connection type (machine) Shank Material (brush filament) Stainless steel Wire thickness 0,15 mm Twisted No Height 65 mm Connection size (machine) 6 mm n: PFERD PBUIT 1516/6 INOX 0,15 brush unturned Ø 15 mm pin-Ø 6 mm stainless steel wire-Ø 0.15 - 43200022 cn: BRUSCH APPLICATOR cn2: BRUSCH APPLICATOR cn_clear: BRUSCHAPPLICATOR d: Product description PFERD INOX-TOTAL end brush crimped PBUIT dia. 15 mm shank dia. 6 mm stainless steel wire dia. 0.15 Characteristics Suitable for light brushing such as deburring, cleaning, and removal of heat discolouration In addition to brushes with a stainless steel filament, PFERD also offers brushes for work on stainless steel (INOX) with the INOX-TOTAL type They are particularly well-suited to use in extremely critical environments In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Maximum protection against corrosion as all components are produced from stainless steel (INOX) in quality 1.4310 (V2A). Optimal access to hard-to-reach areas such as drilled holes and cavities as the filament spreads out upon rotation. Very good corrosion resistance. Creates fine surfaces. ds: dsc: kts: brush unturned Ø 15 mm pin-Ø 6 mm stainless steel wire-Ø 0.15 kpn: PBUIT 1516/6 INOX 0,15 kpn_dash: kpn_clear: PBUIT15166INOX015 bkpn: PFERD PBUIT 1516/6 INOX 0,15 bkpn_clear: PFERD PBUIT15166INOX015 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Detail brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd detail brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43200022 sr_ns: PFERD43200022
r: 04023604 p: 40.62 pid: 38562 b: PFERD q: 0 st: lt: 8 ean: 4007220806784 sr: PFERD 43316023 sr_no_br: 43316023 sr_no_br_cl: 43316023 sr_cl: PFERD43316023 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 115 mm Connection size (machine) M14 Connection type (machine) Inner thread Wire thickness 0,35 mm Twisted Yes Thickness 10 mm Max. no-load speed 12500 rpm Material (brush filament) Stainless steel n: PFERD POS KBU 11510/M14 INOX 0,35 disc brush unturned Ø 115x10 mm M14 stainless steel wire-Ø 0.35 mm for angle grinder - 43316023 cn: CONICAL BRUSH cn2: CONICAL BRUSH cn_clear: CONICALBRUSH d: Product description PFERD Bevel brush crimped KBU dia. 115x10 mm M14 stainless steel wire dia. 0.35 mm angle grinders Characteristics Excellent for medium-duty brushing such as deburring, cleaning and derusting In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Suitable for use on angle grinders up to 80 m/s. Highly flexible, enabling optimal adjustment to the workpiece contour. Optimal access to hard-to-reach areas such as inner edges, grooves and keyways. Very good corrosion resistance. Creates fine surfaces. ds: dsc: kts: disc brush unturned Ø 115x10 mm M14 stainless steel wire-Ø 0.35 mm for angle grinder kpn: POS KBU 11510/M14 INOX 0,35 kpn_dash: kpn_clear: POSKBU11510M14INOX035 bkpn: PFERD POS KBU 11510/M14 INOX 0,35 bkpn_clear: PFERD POSKBU11510M14INOX035 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Conical brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd conical brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Conical brush sr_no_br_cl_ns: 43316023 sr_ns: PFERD43316023
r: 08078129 p: 40.58 pid: 35677 b: PFERD q: 0 st: lt: 8 ean: 4007220004463 sr: PFERD 43220075 sr_no_br: 43220075 sr_no_br_cl: 43220075 sr_cl: PFERD43220075 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 70 mm Connection size (machine) 6 mm Connection type (machine) Shank Wire thickness 0,55 mm Twisted No Thickness 10 mm Max. no-load speed 15000 rpm n: PFERD KBU 7010/6 CO 120 0,55 disk brush unturned Ø 70x10 mm shank-Ø 6 mm ceramic filament wire-Ø 0.55 mm grit 120 - 43220075 cn: CONICAL BRUSH cn2: CONICAL BRUSH cn_clear: CONICALBRUSH d: Product description PFERD Bevel brush crimped KBU dia. 70x10 mm shank dia. 6 mm ceramic filament dia. 0.55 mm grit 120 Characteristics Excellent for medium-duty brushing such as deburring, cleaning and derusting Brushes with ceramic oxide grain (CO) offer good toughness and excellent sharpness For high stock removal values and aggressive brushing behaviour Plastic filament withstands temperatures up to 220 °C Advantages: Highly flexible, enabling optimal adjustment to the workpiece contour. Optimal access to hard-to-reach areas such as inner edges, grooves and keyways. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. ds: dsc: kts: disk brush unturned Ø 70x10 mm shank-Ø 6 mm ceramic filament wire-Ø 0.55 mm grit 120 kpn: KBU 7010/6 CO 120 0,55 kpn_dash: kpn_clear: KBU70106CO120055 bkpn: PFERD KBU 7010/6 CO 120 0,55 bkpn_clear: PFERD KBU70106CO120055 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Conical brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd conical brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Conical brush sr_no_br_cl_ns: 43220075 sr_ns: PFERD43220075
r: 04023679 p: 40.56 pid: 38546 b: PFERD q: 0 st: lt: 8 ean: 4007220530436 sr: PFERD 43506005 sr_no_br: 43506005 sr_no_br_cl: 43506005 sr_cl: PFERD43506005 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 200 mm Connection type (machine) Bore Material (brush filament) Steel wire Wire thickness 0,25 mm Twisted No Thickness 16 mm Max. no-load speed 6000 rpm Connection size (machine) 22,2 mm n: PFERD 20016/22,2 ST 0,25 Round brush narrow untied RBU Ø 200 x 16 mm variable arbor hole steel wire-Ø 0.25 - 43506005 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD wheel brush slim crimped RBU dia. 200x16xvariable hole steel wire dia. 0.25 Characteristics Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Excellent for medium-duty hand-held or automated brushing of workpieces with large surfaces Advantages: Can be used with all commercially available stationary drive systems and bench grinders thanks to the variable hole diameter. The special design enables bunching to create wide gapless rollers. This enables a uniform surface finish to be achieved. Highly flexible, enabling optimal adjustment to the workpiece contour. Long tool life through use of PFERD special wire. Creates fine surfaces. ds: dsc: kts: Round brush narrow untied RBU Ø 200 x 16 mm variable arbor hole steel wire-Ø 0.25 kpn: 20016/22,2 ST 0,25 kpn_dash: kpn_clear: 20016222ST025 bkpn: PFERD 20016/22,2 ST 0,25 bkpn_clear: PFERD 20016222ST025 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43506005 sr_ns: PFERD43506005
r: 03180335 p: 40.43 pid: 69710 b: PFERD q: 0 st: lt: 8 ean: 4007220806807 sr: PFERD 43503003 sr_no_br: 43503003 sr_no_br_cl: 43503003 sr_cl: PFERD43503003 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 125 mm Connection type (machine) Bore Material (brush filament) Stainless steel Wire thickness 0,3 mm Twisted No Thickness 12 mm Max. no-load speed 8000 rpm Connection size (machine) 14 mm n: PFERD 12512/14,0 INOX 0,30 round brush narrow unturned RBU Ø 125 x 12 x 14 mm arbor hole stainless steel wire-Ø 0.30 - 43503003 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD Wheel brush slim crimped RBU dia. 125x12x14 mm hole stainless steel wire dia. 0.30 Characteristics In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Excellent for medium-duty hand-held or automated brushing of workpieces with large surfaces Advantages: Can be used with all commercially available stationary drive systems and bench grinders thanks to the variable hole diameter. The brush is degreased and does not leave any oil residue on the workpiece. The special design enables bunching to create wide gapless rollers. This enables a uniform surface finish to be achieved. Highly flexible, enabling optimal adjustment to the workpiece contour. Very good corrosion resistance. Creates fine surfaces. ds: dsc: kts: round brush narrow unturned RBU Ø 125 x 12 x 14 mm arbor hole stainless steel wire-Ø 0.30 kpn: 12512/14,0 INOX 0,30 kpn_dash: kpn_clear: 12512140INOX030 bkpn: PFERD 12512/14,0 INOX 0,30 bkpn_clear: PFERD 12512140INOX030 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43503003 sr_ns: PFERD43503003
r: 02965003 p: 40.3 pid: 68890 b: PFERD q: 0 st: lt: 8 ean: 4007220119440 sr: PFERD 43469007 sr_no_br: 43469007 sr_no_br_cl: 43469007 sr_cl: PFERD43469007 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 75 mm Connection type (machine) X-Lock Twisted No Wire thickness 0,3 mm Material (brush filament) Stainless steel n: PFERD 43469007 cup brush unturned TBU Ø 75 bore 22.2 mm/X-LOCK stainless steel wire dia. 0.30 angle grinders cn: CUP BRUSH cn2: CUP BRUSH cn_clear: CUPBRUSH d: Product description PFERD Cup brush crimped TBU dia. 75 hole 22.2 mm/X-LOCK stainless steel wire dia. 0.30 angle grinders Characteristics Excellent for medium-duty brushing such as deburring, cleaning and derusting on large surfaces The Bosch X-LOCK system for angle grinders enables you to change tools quickly and easily Instead of a round centre hole, the X-LOCK system features an X-shaped contour, which allows the tool to be fixed on the angle grinder in a form-fitting manner This means different kinds of tools can be clamped in a reliable manner in a very short space of time The unique system meets the highest of quality and safety standards and can withstand rough and harsh application conditions ;X-LOCK from Bosch is the world's first quick-changing system for angle grinders: Position the tool in the X-LOCK holder, click it into place - and you're ready! It's never been so easy to change accessories on angle grinders X-LOCK is creating a new standard which makes professionals' lives easier and increases their productivity Bosch Power Tools relies on strong partners like PFERD PFERD has developed the principle for connecting the X-LOCK punched part with the bonded abrasive, flap discs and brushes and created the conditions to enable them to be produced industrially In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. With X-LOCK arbor for quick and easy tool changing. Secure fixing as the tool audibly clicks into place. Highly flexible, enabling optimal adjustment to the workpiece contour. Very good corrosion resistance. Creates fine surfaces. ds: dsc: kts: cup brush unturned TBU Ø 75 bore 22.2 mm/X-LOCK stainless steel wire dia. 0.30 angle grinders kpn: 43469007 kpn_dash: kpn_clear: 43469007 bkpn: PFERD 43469007 bkpn_clear: PFERD 43469007 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Cup brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd cup brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Cup brush sr_no_br_cl_ns: 43469007 sr_ns: PFERD43469007
r: 08077634 p: 40.14 pid: 36813 b: PFERD q: 0 st: lt: 8 ean: 4007220808429 sr: PFERD 43200102 sr_no_br: 43200102 sr_no_br_cl: 43200102 sr_cl: PFERD43200102 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 10 mm Connection type (machine) Shank Material (brush filament) Stainless steel Wire thickness 0,2 mm Twisted Yes Height 65 mm Connection size (machine) 6 mm n: PFERD PBGSIT 1010/6 INOX 0,20 singletwist brush twisted Ø10 mm pin-Ø6 mm stainless steel wire-Ø0.20 - 43200102 cn: BRUSCH APPLICATOR cn2: BRUSCH APPLICATOR cn_clear: BRUSCHAPPLICATOR d: Product description PFERD SINGLETWIST INOX-TOTAL end brush knotted PBGSIT dia. 10 mm shank dia. 6 mm stainless steel wire dia. 0.20 Characteristics Particularly flexible single-knot brush for special applications In addition to brushes with a stainless steel filament, PFERD also offers brushes for work on stainless steel (INOX) with the INOX-TOTAL type They are particularly well-suited to use in extremely critical environments In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Maximum protection against corrosion as all components are produced from stainless steel (INOX) in quality 1.4310 (V2A). Optimal access to hard-to-reach areas such as inside corners, as the knot is less likely to unravel. Very good corrosion resistance. ds: dsc: kts: singletwist brush twisted Ø10 mm pin-Ø6 mm stainless steel wire-Ø0.20 kpn: PBGSIT 1010/6 INOX 0,20 kpn_dash: kpn_clear: PBGSIT10106INOX020 bkpn: PFERD PBGSIT 1010/6 INOX 0,20 bkpn_clear: PFERD PBGSIT10106INOX020 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Detail brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd detail brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43200102 sr_ns: PFERD43200102
r: 04023375 p: 40.05 pid: 38507 b: PFERD q: 0 st: lt: 8 ean: 4007220808436 sr: PFERD 43200107 sr_no_br: 43200107 sr_no_br_cl: 43200107 sr_cl: PFERD43200107 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 10 mm Connection type (machine) Shank Material (brush filament) Stainless steel Wire thickness 0,35 mm Twisted Yes Height 65 mm Connection size (machine) 6 mm n: PFERD PBGSIT 1010/6 INOX 0,35 singletwist brush twisted Ø10 mm pin-Ø6 mm stainless steel wire-Ø0.35 - 43200107 cn: BRUSCH APPLICATOR cn2: BRUSCH APPLICATOR cn_clear: BRUSCHAPPLICATOR d: Product description PFERD SINGLETWIST INOX-TOTAL end brush knotted PBGSIT dia. 10 mm shank dia. 6 mm stainless steel wire dia. 0.35 Characteristics Particularly flexible single-knot brush for special applications In addition to brushes with a stainless steel filament, PFERD also offers brushes for work on stainless steel (INOX) with the INOX-TOTAL type They are particularly well-suited to use in extremely critical environments In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Maximum protection against corrosion as all components are produced from stainless steel (INOX) in quality 1.4310 (V2A). Optimal access to hard-to-reach areas such as inside corners, as the knot is less likely to unravel. Very good corrosion resistance. ds: dsc: kts: singletwist brush twisted Ø10 mm pin-Ø6 mm stainless steel wire-Ø0.35 kpn: PBGSIT 1010/6 INOX 0,35 kpn_dash: kpn_clear: PBGSIT10106INOX035 bkpn: PFERD PBGSIT 1010/6 INOX 0,35 bkpn_clear: PFERD PBGSIT10106INOX035 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Detail brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd detail brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43200107 sr_ns: PFERD43200107
r: 08078052 p: 40.04 pid: 37136 b: PFERD q: 0 st: lt: 8 ean: 4007220956342 sr: PFERD 43701239 sr_no_br: 43701239 sr_no_br_cl: 43701239 sr_cl: PFERD43701239 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 180 mm Connection type (machine) Bore Material (brush filament) Steel wire Wire thickness 0,3 mm Twisted No Thickness 25 mm Max. no-load speed 6000 rpm Connection size (machine) 50,8 mm n: PFERD 18025/AK32-2 ST 0,30 POS round brush wide unturned RBU Ø 180 x 25 mm variable arbor hole steel wire-Ø 0.30 grinding head - 43701239 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD POS wheel brush wide crimped RBU dia. 180x25xvariable hole steel wire dia. 0.30 bench grinder Characteristics Excellent for medium-duty hand-held or automated brushing of workpieces with large surfaces Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Developed for general use in the workshop Advantages: Can be used with all commercially available stationary drive systems and bench grinders thanks to the variable hole diameter. Highly flexible, enabling optimal adjustment to the workpiece contour. Long tool life through use of PFERD special wire. Creates fine surfaces. ds: dsc: kts: POS round brush wide unturned RBU Ø 180 x 25 mm variable arbor hole steel wire-Ø 0.30 grinding head kpn: 18025/AK32-2 ST 0,30 kpn_dash: 18025/AK32 kpn_clear: 18025AK322ST030 bkpn: PFERD 18025/AK32-2 ST 0,30 bkpn_clear: PFERD 18025AK322ST030 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43701239 sr_ns: PFERD43701239
r: 08078504 p: 39.89 pid: 66055 b: PFERD q: 0 st: lt: 8 ean: 4007220587553 sr: PFERD 45016006 sr_no_br: 45016006 sr_no_br_cl: 45016006 sr_cl: PFERD45016006 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Width 25 mm Length 50 m Grit size 60 n: PFERD SBR 25 A 60 Corundum sanding roll cloth 25mm x 50m grit 60 for universal application - 45016006 cn: SANDING ROLL cn2: SANDING ROLL cn_clear: SANDINGROLL d: Product description PFERD Aluminium oxide shop roll cloth SBR width 25 mm x length 50m A60 for general use Characteristics The cloth-backed variant is suitable for general, heavy-duty use on alloyed and non-alloyed steels, as well as non-ferrous metals The carton has a tear-off edge for separating the sections of abrasive belt at the workplace SBR 25 corresponds to shape B, ISO 3366 Advantages: Highly flexible, enabling optimal adjustment to the contour. Little wear due to high tear strength and very good grain adhesion. ds: dsc: kts: Corundum sanding roll cloth 25mm x 50m grit 60 for universal application kpn: SBR 25 A 60 kpn_dash: kpn_clear: SBR25A60 bkpn: PFERD SBR 25 A 60 bkpn_clear: PFERD SBR25A60 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Sanding roll | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd sanding roll sr_no_br_cl_ns: 45016006 sr_ns: PFERD45016006
r: 08078138 p: 39.86 pid: 35417 b: PFERD q: 0 st: lt: 8 ean: 4007220004470 sr: PFERD 43220090 sr_no_br: 43220090 sr_no_br_cl: 43220090 sr_cl: PFERD43220090 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 80 mm Connection size (machine) 6 mm Connection type (machine) Shank Wire thickness 0,55 mm Twisted No Thickness 10 mm Max. no-load speed 12000 rpm Material (brush filament) Silicon carbide n: PFERD KBU 8010/6 SiC 120 0,55 disk brush unturned Ø 80x10 mm pin-Ø 6 mm SiC filament wire-Ø 0.55 mm grit 120 - 43220090 cn: CONICAL BRUSH cn2: CONICAL BRUSH cn_clear: CONICALBRUSH d: Product description PFERD Bevel brush crimped KBU dia. 80x10 mm shank dia. 6 mm SiC filament dia. 0.55 mm grit 120 Characteristics Excellent for medium-duty brushing such as deburring, cleaning and derusting Brushes with silicon carbide (SiC) are particularly well suited to deburring work and surface improvement Plastic filament withstands temperatures up to 220 °C Advantages: Highly flexible, enabling optimal adjustment to the workpiece contour. Optimal access to hard-to-reach areas such as inner edges, grooves and keyways. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. ds: dsc: kts: disk brush unturned Ø 80x10 mm pin-Ø 6 mm SiC filament wire-Ø 0.55 mm grit 120 kpn: KBU 8010/6 SiC 120 0,55 kpn_dash: kpn_clear: KBU80106SiC120055 bkpn: PFERD KBU 8010/6 SiC 120 0,55 bkpn_clear: PFERD KBU80106SiC120055 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Conical brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd conical brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Conical brush sr_no_br_cl_ns: 43220090 sr_ns: PFERD43220090
r: 03164248 p: 39.86 pid: 71278 b: PFERD q: 0 st: lt: 8 ean: 4007220530405 sr: PFERD 43108005 sr_no_br: 43108005 sr_no_br_cl: 43108005 sr_cl: PFERD43108005 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 100 mm Connection type (machine) Shank Material (brush filament) Stainless steel Wire thickness 0,35 mm Twisted Yes Thickness 12 mm Max. no-load speed 20000 rpm Connection size (machine) 6 mm n: PFERD 10012/6 INOX 0,35 round brush twisted RBG Ø 100 x 12 mm pin-Ø 6 mm stainless steel wire-Ø 0.35 - 43108005 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD Wheel brush knotted RBG dia. 100x12 mm shank dia. 6 mm stainless steel wire dia. 0.35 Characteristics Aggressive brush for cleaning, derusting and work on weld seams In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Optimal access to hard-to-reach areas such as grooves and recesses. Aggressive brushing effect due to the very stiff wire knots. Very good corrosion resistance. ds: dsc: kts: round brush twisted RBG Ø 100 x 12 mm pin-Ø 6 mm stainless steel wire-Ø 0.35 kpn: 10012/6 INOX 0,35 kpn_dash: kpn_clear: 100126INOX035 bkpn: PFERD 10012/6 INOX 0,35 bkpn_clear: PFERD 100126INOX035 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43108005 sr_ns: PFERD43108005
r: 08077589 p: 39.84 pid: 35291 b: PFERD q: 0 st: lt: 8 ean: 4007220806722 sr: PFERD 43308061 sr_no_br: 43308061 sr_no_br_cl: 43308061 sr_cl: PFERD43308061 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 100 mm Connection size (machine) M14 Connection type (machine) Inner thread Twisted Yes Wire thickness 0,5 mm Material (brush filament) Steel wire n: PFERD 43308061 COMBITWIST bowl brush knotted TBG Ø 100 mm M14 steel wire dia. 0.50 mm angle grinder cn: CUP BRUSH cn2: CUP BRUSH cn_clear: CUPBRUSH d: Product description PFERD COMBITWIST cup brush knotted TBG dia. 100mm M14 steel wire dia. 0.50mm angle grinders (1) Characteristics Very aggressive brush Excellent for heavy-duty brushing such as deburring, cleaning, derusting and descaling and removal of spatter Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Advantages: Maximum economic efficiency due to maximum tool life and stock removal rate. High level of comfort thanks to smooth running with no brush recoiling. Suitable for work on corners and edges as the knots are less likely to unravel. Aggressive brushing effect due to the very stiff wire knots. Long tool life through use of PFERD special wire. ds: dsc: kts: COMBITWIST bowl brush knotted TBG Ø 100 mm M14 steel wire dia. 0.50 mm angle grinder kpn: 43308061 kpn_dash: kpn_clear: 43308061 bkpn: PFERD 43308061 bkpn_clear: PFERD 43308061 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Cup brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd cup brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Cup brush sr_no_br_cl_ns: 43308061 sr_ns: PFERD43308061
r: 04023527 p: 39.84 pid: 38529 b: PFERD q: 0 st: lt: 8 ean: 4007220593394 sr: PFERD 43304017 sr_no_br: 43304017 sr_no_br_cl: 43304017 sr_cl: PFERD43304017 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 178 mm Connection type (machine) Bore Material (brush filament) Steel wire Wire thickness 0,8 mm Twisted Yes Thickness 13 mm Max. no-load speed 9000 rpm Connection size (machine) 22,2 mm n: PFERD 17813/22,2 CT ST 0,80 COMBITWIST round brush twisted RBG Ø 178 x 13 x 22.2 mm steel wire-Ø 0.80 mm angle grinder - 43304017 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD COMBITWIST wheel brush knotted RBG dia. 178x13x22.2 mm steel wire dia. 0.80 mm angle grinders Characteristics Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Very aggressive brush Suitable for heavy-duty brushing in metalwork such as descaling, derusting, deburring, cleaning of weld seams and removal of adhesive residues and spatter Advantages: Maximum economic efficiency due to maximum tool life and stock removal rate. High level of comfort thanks to smooth running with no brush recoiling. Suitable for work on corners and edges as the knots are less likely to unravel. Aggressive brushing effect due to the very stiff wire knots. Long tool life through use of PFERD special wire. ds: dsc: kts: COMBITWIST round brush twisted RBG Ø 178 x 13 x 22.2 mm steel wire-Ø 0.80 mm angle grinder kpn: 17813/22,2 CT ST 0,80 kpn_dash: kpn_clear: 17813222CTST080 bkpn: PFERD 17813/22,2 CT ST 0,80 bkpn_clear: PFERD 17813222CTST080 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43304017 sr_ns: PFERD43304017
r: 08078042 p: 39.84 pid: 35046 b: PFERD q: 0 st: lt: 8 ean: 4007220593370 sr: PFERD 43304011 sr_no_br: 43304011 sr_no_br_cl: 43304011 sr_cl: PFERD43304011 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 178 mm Connection type (machine) Bore Material (brush filament) Steel wire Wire thickness 0,5 mm Twisted Yes Thickness 13 mm Max. no-load speed 9000 rpm Connection size (machine) 22,2 mm n: PFERD 17813/22,2 CT ST 0,50 COMBITWIST round brush twisted RBG Ø 178 x 13 x 22.2 mm steel wire-Ø 0.50 mm angle grinder - 43304011 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD COMBITWIST wheel brush knotted RBG dia. 178x13x22.2 mm steel wire dia. 0.50 mm angle grinders Characteristics Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Very aggressive brush Suitable for heavy-duty brushing in metalwork such as descaling, derusting, deburring, cleaning of weld seams and removal of adhesive residues and spatter Advantages: Maximum economic efficiency due to maximum tool life and stock removal rate. High level of comfort thanks to smooth running with no brush recoiling. Suitable for work on corners and edges as the knots are less likely to unravel. Aggressive brushing effect due to the very stiff wire knots. Long tool life through use of PFERD special wire. ds: dsc: kts: COMBITWIST round brush twisted RBG Ø 178 x 13 x 22.2 mm steel wire-Ø 0.50 mm angle grinder kpn: 17813/22,2 CT ST 0,50 kpn_dash: kpn_clear: 17813222CTST050 bkpn: PFERD 17813/22,2 CT ST 0,50 bkpn_clear: PFERD 17813222CTST050 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43304011 sr_ns: PFERD43304011
r: 08079342 p: 39.67 pid: 34655 b: PFERD q: 0 st: lt: 8 ean: 4007220258460 sr: PFERD 36113010 sr_no_br: 36113010 sr_no_br_cl: 36113010 sr_cl: PFERD36113010 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 13 mm Grit size B126 Shank size 6 mm Shape (grinding point) Cylinder Height 10 mm n: PFERD BZY-N 13,0-10/6 B 126 CBN cylindrical 13.0 mm shank Ø 6 mm B126 (mid.) for grinding bores/radii - 36113010 cn: MOUNTED GRINDING STONE cn2: MOUNTED GRINDING STONE cn_clear: MOUNTEDGRINDINGSTONE d: Product description PFERD CBN grinding point cylindrical dia. 13.0 mm shank dia. 6 mm B126 (medium) for grinding holes and radii Characteristics Electroplated diamond and CBN grinding points are used for both wet and dry grinding The cylindrical shape ZY is suitable for grinding bores, radii and contours in stationary or manual applications N = non-stepped shank Grinding points with a diameter of 8 mm or more have a recess on the front surface ds: dsc: kts: CBN cylindrical 13.0 mm shank Ø 6 mm B126 (mid.) for grinding bores/radii kpn: BZY-N 13,0-10/6 B 126 kpn_dash: BZY kpn_clear: BZYN130106B126 bkpn: PFERD BZY-N 13,0-10/6 B 126 bkpn_clear: PFERD BZYN130106B126 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Mounted grinding stone | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd mounted grinding stone | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Mounted grinding stone sr_no_br_cl_ns: 36113010 sr_ns: PFERD36113010
r: 08078123 p: 39.3 pid: 35674 b: PFERD q: 0 st: lt: 8 ean: 4007220936474 sr: PFERD 43225017 sr_no_br: 43225017 sr_no_br_cl: 43225017 sr_cl: PFERD43225017 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 50 mm Connection size (machine) 6 mm Connection type (machine) Shank Wire thickness 0,2 mm Twisted No Thickness 10 mm Max. no-load speed 15000 rpm Material (brush filament) Stainless steel n: PFERD KBUIT 5010/6 INOX 0,20 disk brush unturned Ø 50x10 mm pin-Ø 6 mm stainless steel wire-Ø 0.20 - 43225017 cn: CONICAL BRUSH cn2: CONICAL BRUSH cn_clear: CONICALBRUSH d: Product description PFERD INOX-TOTAL bevel brush crimped KBUIT dia. 50x10 mm shank dia. 6 mm stainless steel wire dia. 0.20 Characteristics Excellent for medium-duty brushing such as deburring, cleaning, and removal of heat discolouration In addition to brushes with a stainless steel filament, PFERD also offers brushes for work on stainless steel (INOX) with the INOX-TOTAL type They are particularly well-suited to use in extremely critical environments In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Maximum protection against corrosion as all components are produced from stainless steel (INOX) in quality 1.4310 (V2A). Highly flexible, enabling optimal adjustment to the workpiece contour. Optimal access to hard-to-reach areas such as inner edges, grooves and keyways. Very good corrosion resistance. Creates fine surfaces. ds: dsc: kts: disk brush unturned Ø 50x10 mm pin-Ø 6 mm stainless steel wire-Ø 0.20 kpn: KBUIT 5010/6 INOX 0,20 kpn_dash: kpn_clear: KBUIT50106INOX020 bkpn: PFERD KBUIT 5010/6 INOX 0,20 bkpn_clear: PFERD KBUIT50106INOX020 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Conical brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd conical brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Conical brush sr_no_br_cl_ns: 43225017 sr_ns: PFERD43225017
r: 04023492 p: 39.18 pid: 38929 b: PFERD q: 0 st: lt: 8 ean: 4007220751015 sr: PFERD 43303501 sr_no_br: 43303501 sr_no_br_cl: 43303501 sr_cl: PFERD43303501 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 150 mm Connection type (machine) Bore Material (brush filament) Steel wire Wire thickness 0,5 mm Twisted Yes Thickness 6 mm Max. no-load speed 10000 rpm Connection size (machine) 22,2 mm n: PFERD 15006/22,2 PIPE ST 0,50 PIPELINE brush twisted RBG Ø 150 x 6 x 22,2 mm steel wire-Ø 0,50 mm angle grinder - 43303501 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD PIPELINE brush knotted RBG dia. 150x6x22.2 mm steel wire dia. 0.50 mm angle grinders Characteristics Aggressive and robust brush that is able to withstand high mechanical loads Perfect for heavy-duty brushing in pipeline and container construction Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Advantages: Aggressive brushing effect due to the very stiff wire knots. Extra-slim design enables optimal access to hard-to-reach areas such as root weld seams. Long tool life through use of PFERD special wire. ds: dsc: kts: PIPELINE brush twisted RBG Ø 150 x 6 x 22,2 mm steel wire-Ø 0,50 mm angle grinder kpn: 15006/22,2 PIPE ST 0,50 kpn_dash: kpn_clear: 15006222PIPEST050 bkpn: PFERD 15006/22,2 PIPE ST 0,50 bkpn_clear: PFERD 15006222PIPEST050 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43303501 sr_ns: PFERD43303501
r: 03164341 p: 39.18 pid: 69668 b: PFERD q: 0 st: lt: 8 ean: 4007220751022 sr: PFERD 43303502 sr_no_br: 43303502 sr_no_br_cl: 43303502 sr_cl: PFERD43303502 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 150 mm Connection type (machine) Inner thread Material (brush filament) Steel wire Wire thickness 0,5 mm Twisted Yes Thickness 6 mm Max. no-load speed 10000 rpm Connection size (machine) M14 n: PFERD 15006/M14 PIPE ST 0,50 PIPELINE brush twisted RBG Ø 150 x 6 mm M14 steel wire-Ø 0.50 mm angle grinder - 43303502 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD PIPELINE brush knotted RBG dia. 150x6 mm M14 steel wire dia. 0.50 mm angle grinders Characteristics Aggressive and robust brush that is able to withstand high mechanical loads Perfect for heavy-duty brushing in pipeline and container construction Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Advantages: Aggressive brushing effect due to the very stiff wire knots. Extra-slim design enables optimal access to hard-to-reach areas such as root weld seams. Long tool life through use of PFERD special wire. ds: dsc: kts: PIPELINE brush twisted RBG Ø 150 x 6 mm M14 steel wire-Ø 0.50 mm angle grinder kpn: 15006/M14 PIPE ST 0,50 kpn_dash: kpn_clear: 15006M14PIPEST050 bkpn: PFERD 15006/M14 PIPE ST 0,50 bkpn_clear: PFERD 15006M14PIPEST050 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43303502 sr_ns: PFERD43303502
r: 04024444 p: 39.17 pid: 33032 b: PFERD q: 0 st: lt: 8 ean: 4007220296936 sr: PFERD 44726120 sr_no_br: 44726120 sr_no_br_cl: 44726120 sr_cl: PFERD44726120 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 150 mm Grit size 120 Connection size (machine) 25,4 mm Connection type (machine) Bore Width 50 mm n: PFERD FR 15050/25,4 A 120 flap wheel 150x50 mm, bore Ø 25.4 mm, grain 120 for universal application - 44726120 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Flap grinding wheel FR dia. 150x50 mm centre hole dia. 25.4 mm A120 for general use Characteristics On unmounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 5429, unmounted flap wheels are designated as ""flap wheels"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to special clamping system. ds: dsc: kts: flap wheel 150x50 mm, bore Ø 25.4 mm, grain 120 for universal application kpn: FR 15050/25,4 A 120 kpn_dash: kpn_clear: FR15050254A120 bkpn: PFERD FR 15050/25,4 A 120 bkpn_clear: PFERD FR15050254A120 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44726120 sr_ns: PFERD44726120
