r: 08078051 p: 47.13 pid: 34533 b: PFERD q: 0 st: lt: 8 ean: 4007220956335 sr: PFERD 43701235 sr_no_br: 43701235 sr_no_br_cl: 43701235 sr_cl: PFERD43701235 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 180 mm Connection type (machine) Bore Material (brush filament) Steel wire Wire thickness 0,2 mm Twisted No Thickness 25 mm Max. no-load speed 6000 rpm Connection size (machine) 50,8 mm n: PFERD 18025/AK32-2 ST 0,20 round brush wide untied RBU Ø 180 x 25 mm variable arbor hole steel wire-Ø 0.20 grinding cup - 43701235 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD wheel brush wide crimped RBU dia. 180x25xvariable hole steel wire dia. 0.20 bench grinder Characteristics Excellent for medium-duty hand-held or automated brushing of workpieces with large surfaces Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Developed for general use in the workshop Advantages: Can be used with all commercially available stationary drive systems and bench grinders thanks to the variable hole diameter. Highly flexible, enabling optimal adjustment to the workpiece contour. Long tool life through use of PFERD special wire. Creates fine surfaces. ds: dsc: kts: round brush wide untied RBU Ø 180 x 25 mm variable arbor hole steel wire-Ø 0.20 grinding cup kpn: 18025/AK32-2 ST 0,20 kpn_dash: 18025/AK32 kpn_clear: 18025AK322ST020 bkpn: PFERD 18025/AK32-2 ST 0,20 bkpn_clear: PFERD 18025AK322ST020 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43701235 sr_ns: PFERD43701235
r: 08078144 p: 47.04 pid: 37180 b: PFERD q: 0 st: lt: 8 ean: 4007220004494 sr: PFERD 43220110 sr_no_br: 43220110 sr_no_br_cl: 43220110 sr_cl: PFERD43220110 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 95 mm Connection size (machine) 6 mm Connection type (machine) Shank Wire thickness 1,1 mm Twisted No Thickness 10 mm Max. no-load speed 12000 rpm Material (brush filament) Silicon carbide n: PFERD KBU 9510/6 SiC 120 1,10 disk brush unturned Ø 95x10 mm pin-Ø 6 mm SiC filament wire-Ø 1.10 mm grit 120 - 43220110 cn: CONICAL BRUSH cn2: CONICAL BRUSH cn_clear: CONICALBRUSH d: Product description PFERD Bevel brush crimped KBU dia. 95x10 mm shank dia. 6 mm SiC filament dia. 1.10 mm grit 120 Characteristics Excellent for medium-duty brushing such as deburring, cleaning and derusting Brushes with silicon carbide (SiC) are particularly well suited to deburring work and surface improvement Plastic filament withstands temperatures up to 220 °C Advantages: Highly flexible, enabling optimal adjustment to the workpiece contour. Optimal access to hard-to-reach areas such as inner edges, grooves and keyways. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. ds: dsc: kts: disk brush unturned Ø 95x10 mm pin-Ø 6 mm SiC filament wire-Ø 1.10 mm grit 120 kpn: KBU 9510/6 SiC 120 1,10 kpn_dash: kpn_clear: KBU95106SiC120110 bkpn: PFERD KBU 9510/6 SiC 120 1,10 bkpn_clear: PFERD KBU95106SiC120110 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Conical brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd conical brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Conical brush sr_no_br_cl_ns: 43220110 sr_ns: PFERD43220110
r: 08077626 p: 46.83 pid: 33069 b: PFERD q: 0 st: lt: 8 ean: 4007220105528 sr: PFERD 44733208 sr_no_br: 44733208 sr_no_br_cl: 44733208 sr_cl: PFERD44733208 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 165 mm Grit size 80 Connection size (machine) 25,4 mm Connection type (machine) Bore Width 30 mm n: PFERD FR 16530/25,4 CO-COOL 80 flap wheel 165x30 mm, bore Ø 25,4 mm, grit 80 for cool grinding on stainless steel - 44733208 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Flap grinding wheel FR dia. 165x30 mm centre hole dia. 25.4 mm CO-COOL80 for cool grinding on stainless steel Characteristics On unmounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 5429, unmounted flap wheels are designated as ""flap wheels"" For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well Consistently high performance due to self-sharpening ceramic oxide grain Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to special clamping system. ds: dsc: kts: flap wheel 165x30 mm, bore Ø 25,4 mm, grit 80 for cool grinding on stainless steel kpn: FR 16530/25,4 CO-COOL 80 kpn_dash: FR 16530/25,4 CO kpn_clear: FR16530254COCOOL80 bkpn: PFERD FR 16530/25,4 CO-COOL 80 bkpn_clear: PFERD FR16530254COCOOL80 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44733208 sr_ns: PFERD44733208
r: 03093747 p: 46.83 pid: 33882 b: PFERD q: 0 st: lt: 8 ean: 4007220105535 sr: PFERD 44733212 sr_no_br: 44733212 sr_no_br_cl: 44733212 sr_cl: PFERD44733212 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 165 mm Grit size 120 Connection size (machine) 25,4 mm Connection type (machine) Bore Width 30 mm n: PFERD FR 16530/25,4 CO-COOL 120 flap wheel 165x30 mm, bore Ø 25,4 mm, grain 120 for cool grinding on stainless steel - 44733212 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Flap grinding wheel FR dia. 165x30 mm centre hole dia. 25.4 mm CO-COOL120 for cool grinding on stainless steel Characteristics On unmounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 5429, unmounted flap wheels are designated as ""flap wheels"" For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well Consistently high performance due to self-sharpening ceramic oxide grain Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to special clamping system. ds: dsc: kts: flap wheel 165x30 mm, bore Ø 25,4 mm, grain 120 for cool grinding on stainless steel kpn: FR 16530/25,4 CO-COOL 120 kpn_dash: FR 16530/25,4 CO kpn_clear: FR16530254COCOOL120 bkpn: PFERD FR 16530/25,4 CO-COOL 120 bkpn_clear: PFERD FR16530254COCOOL120 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44733212 sr_ns: PFERD44733212
r: 08079256 p: 46.79 pid: 34232 b: PFERD q: 0 st: lt: 8 ean: 4007220097366 sr: PFERD 36476061 sr_no_br: 36476061 sr_no_br_cl: 36476061 sr_cl: PFERD36476061 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 10 mm Grit size D852 Shank size 6 mm Shape (grinding point) Rounded cylindrical Height 20 mm n: PFERD DWR-N 10-20/6 D 852 diamond grinding point round roller shape 10.0 mm shank Ø 6 mm D852 (very coarse) for deburring - 36476061 cn: MOUNTED GRINDING STONE cn2: MOUNTED GRINDING STONE cn_clear: MOUNTEDGRINDINGSTONE d: Product description PFERD Diamond grinding point cylindrical with radius end dia. 10.0 mm shank dia. 6 mm D852 (very coarse) for deburring Characteristics Electroplated diamond and CBN grinding points are used for both wet and dry grinding Diamond grinding points with grit size D 852 are exceptionally well-suited to machining grey cast iron and nodular cast iron (GG and GGG or GJL and GJS) N = non-stepped shank Advantages: Excellent tool life. Fast, aggressive grinding with maximum stock removal rate. Easy and quick elimination of metal contamination thanks to diamond as a super-hard abrasive. Lower dust load due to the dimensional stability of the grinding tool (no tool wear). ds: dsc: kts: diamond grinding point round roller shape 10.0 mm shank Ø 6 mm D852 (very coarse) for deburring kpn: DWR-N 10-20/6 D 852 kpn_dash: DWR kpn_clear: DWRN10206D852 bkpn: PFERD DWR-N 10-20/6 D 852 bkpn_clear: PFERD DWRN10206D852 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Mounted grinding stone | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd mounted grinding stone | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Mounted grinding stone sr_no_br_cl_ns: 36476061 sr_ns: PFERD36476061
r: 03206345 p: 46.72 pid: 32364 b: PFERD q: 0 st: lt: 6 ean: 4007220469804 sr: PFERD 44731081 sr_no_br: 44731081 sr_no_br_cl: 44731081 sr_cl: PFERD44731081 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 165 mm Grit size 80 Connection size (machine) 25,4 mm Connection type (machine) Bore Width 50 mm n: PFERD FR 16550/25,4 A 80 flap wheel 165x50 mm, bore Ø 25.4 mm, grit 80 for universal application - 44731081 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Flap grinding wheel FR dia. 165x50 mm centre hole dia. 25.4 mm A80 for general use Characteristics On unmounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 5429, unmounted flap wheels are designated as ""flap wheels"" For general applications from coarse to fine grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to special clamping system. ds: dsc: kts: flap wheel 165x50 mm, bore Ø 25.4 mm, grit 80 for universal application kpn: FR 16550/25,4 A 80 kpn_dash: kpn_clear: FR16550254A80 bkpn: PFERD FR 16550/25,4 A 80 bkpn_clear: PFERD FR16550254A80 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44731081 sr_ns: PFERD44731081
r: 08077620 p: 46.7 pid: 32737 b: PFERD q: 0 st: lt: 8 ean: 4007220105474 sr: PFERD 44727206 sr_no_br: 44727206 sr_no_br_cl: 44727206 sr_cl: PFERD44727206 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 150 mm Grit size 60 Connection size (machine) 25,4 mm Connection type (machine) Bore Width 50 mm n: PFERD FR 15050/25,4 CO-COOL 60 flap wheel 150x50 mm, bore Ø 25.4 mm, grain 60 for cool grinding on stainless steel - 44727206 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Flap grinding wheel FR dia. 150x50 mm centre hole dia. 25.4 mm CO-COOL60 for cool grinding on stainless steel Characteristics On unmounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 5429, unmounted flap wheels are designated as ""flap wheels"" For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well Consistently high performance due to self-sharpening ceramic oxide grain Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to special clamping system. ds: dsc: kts: flap wheel 150x50 mm, bore Ø 25.4 mm, grain 60 for cool grinding on stainless steel kpn: FR 15050/25,4 CO-COOL 60 kpn_dash: FR 15050/25,4 CO kpn_clear: FR15050254COCOOL60 bkpn: PFERD FR 15050/25,4 CO-COOL 60 bkpn_clear: PFERD FR15050254COCOOL60 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44727206 sr_ns: PFERD44727206
r: 08077619 p: 46.7 pid: 35050 b: PFERD q: 0 st: lt: 8 ean: 4007220105467 sr: PFERD 44727204 sr_no_br: 44727204 sr_no_br_cl: 44727204 sr_cl: PFERD44727204 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 150 mm Grit size 40 Connection size (machine) 25,4 mm Connection type (machine) Bore Width 50 mm n: PFERD FR 15050/25,4 CO-COOL 40 flap wheel 150x50 mm, bore Ø 25.4 mm, grain 40 for cool grinding on stainless steel - 44727204 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD Flap grinding wheel FR dia. 150x50 mm centre hole dia. 25.4 mm CO-COOL40 for cool grinding on stainless steel Characteristics On unmounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 5429, unmounted flap wheels are designated as ""flap wheels"" For aggressive grinding with maximum stock removal rate on hard materials which do not conduct heat well Consistently high performance due to self-sharpening ceramic oxide grain Active grinding additives in the coating substantially improve the stock removal rate, prevent clogging and result in cooler grinding Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to special clamping system. ds: dsc: kts: flap wheel 150x50 mm, bore Ø 25.4 mm, grain 40 for cool grinding on stainless steel kpn: FR 15050/25,4 CO-COOL 40 kpn_dash: FR 15050/25,4 CO kpn_clear: FR15050254COCOOL40 bkpn: PFERD FR 15050/25,4 CO-COOL 40 bkpn_clear: PFERD FR15050254COCOOL40 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44727204 sr_ns: PFERD44727204
r: 08078127 p: 46.65 pid: 35157 b: PFERD q: 0 st: lt: 8 ean: 4007220936481 sr: PFERD 43225052 sr_no_br: 43225052 sr_no_br_cl: 43225052 sr_cl: PFERD43225052 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 70 mm Connection size (machine) 6 mm Connection type (machine) Shank Wire thickness 0,15 mm Twisted No Thickness 10 mm Max. no-load speed 15000 rpm Material (brush filament) Stainless steel n: PFERD KBUIT 7010/6 INOX 0,15 disk brush unturned Ø 70x10 mm pin-Ø 6 mm stainless steel wire-Ø 0.15 - 43225052 cn: CONICAL BRUSH cn2: CONICAL BRUSH cn_clear: CONICALBRUSH d: Product description PFERD INOX-TOTAL bevel brush crimped KBUIT dia. 70x10 mm shank dia. 6 mm stainless steel wire dia. 0.15 Characteristics Excellent for medium-duty brushing such as deburring, cleaning, and removal of heat discolouration In addition to brushes with a stainless steel filament, PFERD also offers brushes for work on stainless steel (INOX) with the INOX-TOTAL type They are particularly well-suited to use in extremely critical environments In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Maximum protection against corrosion as all components are produced from stainless steel (INOX) in quality 1.4310 (V2A). Highly flexible, enabling optimal adjustment to the workpiece contour. Optimal access to hard-to-reach areas such as inner edges, grooves and keyways. Very good corrosion resistance. Creates fine surfaces. ds: dsc: kts: disk brush unturned Ø 70x10 mm pin-Ø 6 mm stainless steel wire-Ø 0.15 kpn: KBUIT 7010/6 INOX 0,15 kpn_dash: kpn_clear: KBUIT70106INOX015 bkpn: PFERD KBUIT 7010/6 INOX 0,15 bkpn_clear: PFERD KBUIT70106INOX015 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Conical brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd conical brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Conical brush sr_no_br_cl_ns: 43225052 sr_ns: PFERD43225052
r: 03206991 p: 46.46 pid: 36448 b: PFERD q: 0 st: lt: 13 ean: 4007220295359 sr: PFERD 44331002 sr_no_br: 44331002 sr_no_br_cl: 44331002 sr_cl: PFERD44331002 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 100 mm Connection type (machine) Bore Width 20 mm n: PFERD 44331002 felt pad with brass reinforcement FKSC 100x20mm bore 10mm for pre-polishing cn: POLISHING WHEEL cn2: POLISHING WHEEL cn_clear: POLISHINGWHEEL d: Product description PFERD felt wheel with brass inlay FKSC dia. 100x20mm centre hole dia. 10mm for pre-polishing Characteristics Felt wheels are mainly used peripherally They are mostly used for high-gloss polishing Felt wheels with metal inserts (MS) are used for increased stock removal when pre-polishing with diamond grinding pastes Advantages: Precise retention of geometric shapes due to the hardness of these tools. Can be profiled as desired, meaning they can also be used for tools with complex geometries. ds: dsc: kts: felt pad with brass reinforcement FKSC 100x20mm bore 10mm for pre-polishing kpn: 44331002 kpn_dash: kpn_clear: 44331002 bkpn: PFERD 44331002 bkpn_clear: PFERD 44331002 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Polishing wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd polishing wheel | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Polishing wheel sr_no_br_cl_ns: 44331002 sr_ns: PFERD44331002
r: 04023598 p: 46.28 pid: 38939 b: PFERD q: 0 st: lt: 8 ean: 4007220593479 sr: PFERD 43315013 sr_no_br: 43315013 sr_no_br_cl: 43315013 sr_cl: PFERD43315013 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 115 mm Connection size (machine) M14 Connection type (machine) Inner thread Wire thickness 0,35 mm Twisted Yes Thickness 15 mm Max. no-load speed 15000 rpm Material (brush filament) Stainless steel n: PFERD POS KBG 11515/M14 CT INOX 0,35 Combitwist disc brush twisted Ø 115x15 mm M14 stainless steel wire-Ø 0.35 mm - 43315013 cn: CONICAL BRUSH cn2: CONICAL BRUSH cn_clear: CONICALBRUSH d: Product description PFERD COMBITWIST bevel brush knotted KBG dia. 115x15 mm M14 stainless steel wire dia. 0.35 mm angle grinders (1) Characteristics Very aggressive brush Excellent for heavy-duty brushing such as deburring, cleaning, derusting and descaling and removal of spatter In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Maximum economic efficiency due to maximum tool life and stock removal rate. High level of comfort thanks to smooth running with no brush recoiling. Suitable for work on corners and edges as the knots are less likely to unravel. Aggressive brushing effect due to the very stiff wire knots. Optimal access to hard-to-reach areas such as inner edges, grooves and keyways. Very good corrosion resistance. ds: dsc: kts: Combitwist disc brush twisted Ø 115x15 mm M14 stainless steel wire-Ø 0.35 mm kpn: POS KBG 11515/M14 CT INOX 0,35 kpn_dash: kpn_clear: POSKBG11515M14CTINOX035 bkpn: PFERD POS KBG 11515/M14 CT INOX 0,35 bkpn_clear: PFERD POSKBG11515M14CTINOX035 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Conical brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd conical brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Conical brush sr_no_br_cl_ns: 43315013 sr_ns: PFERD43315013
r: 04021989 p: 46.26 pid: 34120 b: PFERD q: 0 st: lt: 8 ean: 4007220353981 sr: PFERD 36425035 sr_no_br: 36425035 sr_no_br_cl: 36425035 sr_cl: PFERD36425035 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 5 mm Grit size D357 Shank size 6 mm Shape (grinding point) Rounded cylindrical Height 18 mm n: PFERD DWR-A 5,0-18/6 D 357 diamond grinding point round roller shape 5.0 mm shank dia. 6 mm D357 (coarse) for grinding GRP/CFK - 36425035 cn: MOUNTED GRINDING STONE cn2: MOUNTED GRINDING STONE cn_clear: MOUNTEDGRINDINGSTONE d: Product description PFERD Diamond grinding point cylindrical with radius end dia. 5.0 mm shank dia. 6 mm D357 (coarse) for grinding GRP/CRP Characteristics Electroplated diamond and CBN grinding points are used for both wet and dry grinding The cylindrical shape with radius end WR is best suited to manual applications and can be used for a wide variety of deburring and grinding tasks Coarse grit size D 357 is exceptionally well-suited for use on fibre-reinforced plastics (GRP/CRP) A = stepped shank ds: dsc: kts: diamond grinding point round roller shape 5.0 mm shank dia. 6 mm D357 (coarse) for grinding GRP/CFK kpn: DWR-A 5,0-18/6 D 357 kpn_dash: DWR kpn_clear: DWRA50186D357 bkpn: PFERD DWR-A 5,0-18/6 D 357 bkpn_clear: PFERD DWRA50186D357 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Mounted grinding stone | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd mounted grinding stone | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Mounted grinding stone sr_no_br_cl_ns: 36425035 sr_ns: PFERD36425035
r: 08079364 p: 46.25 pid: 34688 b: PFERD q: 0 st: lt: 8 ean: 4007220119303 sr: PFERD 36015010 sr_no_br: 36015010 sr_no_br_cl: 36015010 sr_cl: PFERD36015010 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 15 mm Grit size D126 Shank size 6 mm Shape (grinding point) Cylinder Height 10 mm n: PFERD DZY-N 15,0-10/6 D 126 diamond grinding pin cylindrical 15 mm shank Ø 6 mm D126 (mid.) for grinding bores/radii - 36015010 cn: MOUNTED GRINDING STONE cn2: MOUNTED GRINDING STONE cn_clear: MOUNTEDGRINDINGSTONE d: Product description PFERD Diamond grinding point cylindrical dia. 15 mm shank dia. 6 mm D126 (medium) for grinding holes and radii Characteristics Electroplated diamond and CBN grinding points are used for both wet and dry grinding The cylindrical shape ZY is suitable for grinding bores, radii and contours in stationary or manual applications N = non-stepped shank Grinding points with a diameter of 8 mm or more have a recess on the front surface ds: dsc: kts: diamond grinding pin cylindrical 15 mm shank Ø 6 mm D126 (mid.) for grinding bores/radii kpn: DZY-N 15,0-10/6 D 126 kpn_dash: DZY kpn_clear: DZYN150106D126 bkpn: PFERD DZY-N 15,0-10/6 D 126 bkpn_clear: PFERD DZYN150106D126 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Mounted grinding stone | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd mounted grinding stone | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Mounted grinding stone sr_no_br_cl_ns: 36015010 sr_ns: PFERD36015010
r: 03232043 p: 46.04 pid: 38756 b: PFERD q: 0 st: lt: 8 ean: 4007220956397 sr: PFERD 43701106 sr_no_br: 43701106 sr_no_br_cl: 43701106 sr_cl: PFERD43701106 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 100 mm Connection type (machine) Bore Material (brush filament) Stainless steel Wire thickness 0,3 mm Twisted No Thickness 20 mm Max. no-load speed 8000 rpm Connection size (machine) 30 mm n: PFERD 10020/14,0 INOX 0,30 round brush wide untied RBU Ø 100 x 20 mm variable arbor hole stainless steel wire-Ø 0.30 grinding cup - 43701106 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD wheel brush wide crimped RBU dia. 100x20xvariable hole stainless steel wire dia. 0.30 bench grinder Characteristics Excellent for medium-duty hand-held or automated brushing of workpieces with large surfaces In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Developed for general use in the workshop Advantages: Can be used with all commercially available stationary drive systems and bench grinders thanks to the variable hole diameter. Highly flexible, enabling optimal adjustment to the workpiece contour. Very good corrosion resistance. Creates fine surfaces. ds: dsc: kts: round brush wide untied RBU Ø 100 x 20 mm variable arbor hole stainless steel wire-Ø 0.30 grinding cup kpn: 10020/14,0 INOX 0,30 kpn_dash: kpn_clear: 10020140INOX030 bkpn: PFERD 10020/14,0 INOX 0,30 bkpn_clear: PFERD 10020140INOX030 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43701106 sr_ns: PFERD43701106
r: 08077549 p: 45.98 pid: 34401 b: PFERD q: 0 st: lt: 8 ean: 4007220153505 sr: PFERD 43308001 sr_no_br: 43308001 sr_no_br_cl: 43308001 sr_cl: PFERD43308001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 100 mm Connection size (machine) M14 Connection type (machine) Inner thread Twisted Yes Wire thickness 0,5 mm Material (brush filament) Steel wire n: PFERD 43308001 cup brush with support ring knotted TBGR Ø 100 mm M14 steel wire dia. 0.50 mm angle grinders cn: CUP BRUSH cn2: CUP BRUSH cn_clear: CUPBRUSH d: Product description PFERD cup brush with bridle knotted TBGR dia. 100mm M14 steel wire dia. 0.50mm angle grinders Characteristics Aggressive brush with bridle Excellent for heavy-duty brushing such as deburring, cleaning, derusting and descaling, as well as removing spatter on large areas Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Advantages: The bridle prevents the wires spreading out sideways. Particularly long tool life. The bridle enables the spreading out and flexibility of the brush filament to be controlled. If the filament has worn away down to the bridle, it can be removed from the bridle for further use. This does not affect the brushing behaviour. Aggressive brushing effect due to the very stiff wire knots. Long tool life through use of PFERD special wire. ds: dsc: kts: cup brush with support ring knotted TBGR Ø 100 mm M14 steel wire dia. 0.50 mm angle grinders kpn: 43308001 kpn_dash: kpn_clear: 43308001 bkpn: PFERD 43308001 bkpn_clear: PFERD 43308001 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Cup brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd cup brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Cup brush sr_no_br_cl_ns: 43308001 sr_ns: PFERD43308001
r: 03164253 p: 45.86 pid: 69467 b: PFERD q: 0 st: lt: 8 ean: 4007220003459 sr: PFERD 43302124 sr_no_br: 43302124 sr_no_br_cl: 43302124 sr_cl: PFERD43302124 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 115 mm Connection type (machine) Bore Material (brush filament) Stainless steel Wire thickness 0,5 mm Twisted Yes Thickness 12 mm Max. no-load speed 12500 rpm Connection size (machine) 22,2 mm n: PFERD 11512/22,2 INOX 0,50 round brush twisted RBG Ø 115 x 12 x 22,2 mm stainless steel wire-Ø 0,50 mm angle grinders - 43302124 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD Wheel brush knotted RBG dia. 115x12x22.2 mm stainless steel wire dia. 0.50 mm angle grinders (10) Characteristics In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Aggressive brush Suitable for heavy-duty brushing in metalwork such as descaling, derusting, deburring, cleaning of weld seams and removal of adhesive residues and spatter Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Aggressive brushing effect due to the very stiff wire knots. Very good corrosion resistance. ds: dsc: kts: round brush twisted RBG Ø 115 x 12 x 22,2 mm stainless steel wire-Ø 0,50 mm angle grinders kpn: 11512/22,2 INOX 0,50 kpn_dash: kpn_clear: 11512222INOX050 bkpn: PFERD 11512/22,2 INOX 0,50 bkpn_clear: PFERD 11512222INOX050 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43302124 sr_ns: PFERD43302124
r: 03180321 p: 45.61 pid: 69500 b: PFERD q: 0 st: lt: 8 ean: 4007220806982 sr: PFERD 43502202 sr_no_br: 43502202 sr_no_br_cl: 43502202 sr_cl: PFERD43502202 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 115 mm Connection type (machine) Inner thread Material (brush filament) Stainless steel Wire thickness 0,3 mm Twisted No Thickness 12 mm Max. no-load speed 12500 rpm Connection size (machine) M14 n: PFERD 11512/M14 INOX 0,30 round brush unturned RBU Ø 115 x 12 mm M14 stainless steel wire-Ø 0.30 angle grinders - 43502202 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD Wheel brush crimped RBU dia. 115x12 mm M14 stainless steel wire dia. 0.30 angle grinders Characteristics Suitable for medium-duty brushing such as derusting, cleaning of weld seams and light deburring work In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: Suitable for use on angle grinders up to 80 m/s. The brush is degreased and does not leave any oil residue on the workpiece. Highly flexible, enabling optimal adjustment to the workpiece contour. Suitable for use on angle grinders. Very good corrosion resistance. Creates fine surfaces. ds: dsc: kts: round brush unturned RBU Ø 115 x 12 mm M14 stainless steel wire-Ø 0.30 angle grinders kpn: 11512/M14 INOX 0,30 kpn_dash: kpn_clear: 11512M14INOX030 bkpn: PFERD 11512/M14 INOX 0,30 bkpn_clear: PFERD 11512M14INOX030 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43502202 sr_ns: PFERD43502202
