r: 08079403 p: 5.44 pid: 33828 b: PFERD q: 0 st: lt: 8 ean: 4007220802991 sr: PFERD 32210231 sr_no_br: 32210231 sr_no_br_cl: 32210231 sr_cl: PFERD32210231 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 16 mm Grit size 46 Shank size 6 mm Shape (grinding point) Shallow cone Height 45 mm n: PFERD KE 1645 6 ADR 46 O5V Stake cone shape 16x45 mm shank Ø 6 mm A46 for cast steel - 32210231 cn: MOUNTED POINT cn2: MOUNTED POINT cn_clear: MOUNTEDPOINT d: Product description PFERD CAST STEEL mounted point conical dia. 16x45 mm shank dia. 6 mm A46 for cast steel Characteristics The CAST STEEL design is particularly well-suited to rough general work on cast steel It is ideal for removing burrs on cast steel parts and for grinding of intersections after separating risers The conical shape KE is designed for a comfortable working position during surface grinding and grinding of chamfers Advantages: Very high grinding performance and aggressiveness from the start. High stock removal rate in combination with a long tool life. Delivered in practical industrial packaging. ds: dsc: kts: Stake cone shape 16x45 mm shank Ø 6 mm A46 for cast steel kpn: KE 1645 6 ADR 46 O5V kpn_dash: kpn_clear: KE16456ADR46O5V bkpn: PFERD KE 1645 6 ADR 46 O5V bkpn_clear: PFERD KE16456ADR46O5V c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Mounted point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd mounted point | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Mounted grinding stone sr_no_br_cl_ns: 32210231 sr_ns: PFERD32210231
r: 08079159 p: 5.44 pid: 34743 b: PFERD q: 0 st: lt: 8 ean: 4007220505571 sr: PFERD 41121412 sr_no_br: 41121412 sr_no_br_cl: 41121412 sr_cl: PFERD41121412 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 40 mm Bore size 3 mm Width 3 mm n: PFERD 41121412 POLIFLEX disc SC Ø 40x3 mm bore dia. 3 mm binding TX A120 cn: GRINDING WHEEL cn2: GRINDING WHEEL cn_clear: GRINDINGWHEEL d: Product description PFERD Poliflex wheel SC dia. 40x3 mm centre hole dia. 3 mm bond TX A120 Characteristics Poliflex fine grinding tools are manufactured with high shape accuracy, outstandingly consistent quality and tight dimensional tolerances They are ideally suited to fine grinding, structuring and preparations for polishing work, and are very frequently used for tool and mould-making applications Poliflex fine grinding tools with the TX bond are manufactured with standard aluminium oxide The textile fabric inlays make the TX bond a very hard, sturdy bond Suitable for use on edges For fine peripheral grinding on small surfaces Advantages: Produces a fine, matt surface finish. Produces very good surface quality. High economic efficiency thanks to long tool life and high stock removal rate. Maximum working convenience through precise concentricity. ds: dsc: kts: POLIFLEX disc SC Ø 40x3 mm bore dia. 3 mm binding TX A120 kpn: 41121412 kpn_dash: kpn_clear: 41121412 bkpn: PFERD 41121412 bkpn_clear: PFERD 41121412 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Grinding wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd grinding wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Grinding wheel sr_no_br_cl_ns: 41121412 sr_ns: PFERD41121412
r: 08078153 p: 5.44 pid: 36347 b: PFERD q: 0 st: lt: 8 ean: 4007220585931 sr: PFERD 45005908 sr_no_br: 45005908 sr_no_br_cl: 45005908 sr_cl: PFERD45005908 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Width 100 mm Length 1000 mm Grit size 80 n: PFERD 45005908 corundum grinding belt BA 100x1000 mm A80 for universal use with belt grinder cn: SANDING BELT cn2: SANDING BELT cn_clear: SANDINGBELT d: Product description PFERD aluminium oxide abrasive belt BA 100x1000mm A80 for general use with a belt grinder Characteristics For general applications from coarse to fine grinding Long belts are compatible with commonly available belt grinders In ISO 2976, they are listed under the designation ""abrasive belts"" Advantages: High tear strength with optimum flexibility. Consistent results through very good grain adhesion. High economic efficiency due to high abrasive performance and long tool life. ds: dsc: kts: corundum grinding belt BA 100x1000 mm A80 for universal use with belt grinder kpn: 45005908 kpn_dash: kpn_clear: 45005908 bkpn: PFERD 45005908 bkpn_clear: PFERD 45005908 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Sanding belt | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd sanding belt | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Sanding belt sr_no_br_cl_ns: 45005908 sr_ns: PFERD45005908
r: 57072170 p: 5.44 pid: 31946 b: PFERD q: 0 st: lt: 8 ean: 4007220534687 sr: PFERD 32211253 sr_no_br: 32211253 sr_no_br_cl: 32211253 sr_cl: PFERD32211253 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 25 mm Grit size 30 Shank size 6 mm Shape (grinding point) Rounded cone Height 45 mm n: PFERD KE 2545 6 ADW 30 M5V Stake cone shape 25x45 mm shank Ø 6 mm A30 for steel and cast steel - 32211253 cn: MOUNTED POINT cn2: MOUNTED POINT cn_clear: MOUNTEDPOINT d: Product description PFERD STEEL mounted point conical dia. 25x45 mm shank dia. 6 mm A30 for steel and cast steel Characteristics The STEEL type is the most general bond for machining steel and cast steel It is extremely well suited to grinding high-speed steel (HSS) moulded parts and weld dressing of weld seams on steel constructions The conical shape KE is designed for a comfortable working position during surface grinding and grinding of chamfers Advantages: High grinding performance and stock removal rate in general use on steel materials. Shortened grinding times and thus cost savings due to the high stock removal rate. Particularly suitable for work on surfaces and edges. ds: dsc: kts: Stake cone shape 25x45 mm shank Ø 6 mm A30 for steel and cast steel kpn: KE 2545 6 ADW 30 M5V kpn_dash: kpn_clear: KE25456ADW30M5V bkpn: PFERD KE 2545 6 ADW 30 M5V bkpn_clear: PFERD KE25456ADW30M5V c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Mounted point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd mounted point | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Mounted grinding stone sr_no_br_cl_ns: 32211253 sr_ns: PFERD32211253
r: 57070298 p: 5.44 pid: 33994 b: PFERD q: 0 st: lt: 10 ean: 4007220102930 sr: PFERD 32211276 sr_no_br: 32211276 sr_no_br_cl: 32211276 sr_cl: PFERD32211276 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 25 mm Grit size 60 Shank size 6 mm Shape (grinding point) Rounded cone Height 45 mm n: PFERD KE 2545 6 AR 60 O5V Stake cone shape 25x45 mm shank Ø 6 mm A60 for steel and cast steel - 32211276 cn: MOUNTED POINT cn2: MOUNTED POINT cn_clear: MOUNTEDPOINT d: Product description PFERD STEEL EDGE mounted point conical dia. 25x45 mm shank dia. 6 mm A60 for steel and cast steel Characteristics The STEEL EDGE type is particularly well-suited to edge grinding and deburring work on steel and cast steel components Its applications also include grinding of chamfers in preparation for weld seams and grinding of contours The conical shape KE is designed for a comfortable working position when smoothing out a ridge on a surface Advantages: Long tool life and low tool wear due to hard, dimensionally stable bond. Economical to use due to the high edge stability even on low-speed tool drives. Particularly well suited to work on edges. ds: dsc: kts: Stake cone shape 25x45 mm shank Ø 6 mm A60 for steel and cast steel kpn: KE 2545 6 AR 60 O5V kpn_dash: kpn_clear: KE25456AR60O5V bkpn: PFERD KE 2545 6 AR 60 O5V bkpn_clear: PFERD KE25456AR60O5V c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Mounted point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd mounted point | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Mounted grinding stone sr_no_br_cl_ns: 32211276 sr_ns: PFERD32211276
r: 08079153 p: 5.44 pid: 34737 b: PFERD q: 0 st: lt: 8 ean: 4007220505519 sr: PFERD 41120312 sr_no_br: 41120312 sr_no_br_cl: 41120312 sr_cl: PFERD41120312 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 25 mm Bore size 3 mm Width 3 mm n: PFERD 41120312 POLIFLEX disc SC Ø 25x3 mm bore dia. 3 mm binding TX A120 cn: GRINDING WHEEL cn2: GRINDING WHEEL cn_clear: GRINDINGWHEEL d: Product description PFERD Poliflex wheel SC dia. 25x3 mm centre hole dia. 3 mm bond TX A120 Characteristics Poliflex fine grinding tools are manufactured with high shape accuracy, outstandingly consistent quality and tight dimensional tolerances They are ideally suited to fine grinding, structuring and preparations for polishing work, and are very frequently used for tool and mould-making applications Poliflex fine grinding tools with the TX bond are manufactured with standard aluminium oxide The textile fabric inlays make the TX bond a very hard, sturdy bond Suitable for use on edges For fine peripheral grinding on small surfaces Advantages: Produces a fine, matt surface finish. Produces very good surface quality. High economic efficiency thanks to long tool life and high stock removal rate. Maximum working convenience through precise concentricity. ds: dsc: kts: POLIFLEX disc SC Ø 25x3 mm bore dia. 3 mm binding TX A120 kpn: 41120312 kpn_dash: kpn_clear: 41120312 bkpn: PFERD 41120312 bkpn_clear: PFERD 41120312 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Grinding wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd grinding wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Grinding wheel sr_no_br_cl_ns: 41120312 sr_ns: PFERD41120312
r: 08079404 p: 5.44 pid: 35899 b: PFERD q: 0 st: lt: 8 ean: 4007220803059 sr: PFERD 32210531 sr_no_br: 32210531 sr_no_br_cl: 32210531 sr_cl: PFERD32210531 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 16 mm Grit size 46 Shank size 6 mm Shape (grinding point) Shallow cone Height 45 mm n: PFERD KE 1645 6 CU 46 R5V shank cone shape 16x45 mm shank Ø 6 mm SIC46 for grey/lamellar and ductile cast iron - 32210531 cn: MOUNTED POINT cn2: MOUNTED POINT cn_clear: MOUNTEDPOINT d: Product description PFERD CAST EDGE mounted point conical dia. 16x45 mm shank dia. 6 mm SIC46 for grey and nodular cast iron Characteristics The conical shape KE is designed for a comfortable working position during surface grinding and grinding of chamfers The CAST EDGE type for foundries is particularly well-suited to general use and for grinding away metal contamination and grinding out sand contamination and sand deposits on grey and nodular cast iron workpieces in conjunction with high cutting speeds Advantages: Very high grinding performance and aggressiveness from the start. High stock removal rate in combination with a long tool life. Delivered in practical industrial packaging. ds: dsc: kts: shank cone shape 16x45 mm shank Ø 6 mm SIC46 for grey/lamellar and ductile cast iron kpn: KE 1645 6 CU 46 R5V kpn_dash: kpn_clear: KE16456CU46R5V bkpn: PFERD KE 1645 6 CU 46 R5V bkpn_clear: PFERD KE16456CU46R5V c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Mounted point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd mounted point | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Mounted grinding stone sr_no_br_cl_ns: 32210531 sr_ns: PFERD32210531
r: 57070293 p: 5.44 pid: 33985 b: PFERD q: 0 st: lt: 8 ean: 4007220102886 sr: PFERD 32210278 sr_no_br: 32210278 sr_no_br_cl: 32210278 sr_cl: PFERD32210278 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 16 mm Grit size 80 Shank size 6 mm Shape (grinding point) Rounded cone Height 45 mm n: PFERD KE 1645 6 AR 80 O5V shank cone shape 16x45 mm shank Ø 6 mm A80 for steel and cast steel - 32210278 cn: MOUNTED POINT cn2: MOUNTED POINT cn_clear: MOUNTEDPOINT d: Product description PFERD STEEL EDGE mounted point conical dia. 16x45 mm shank dia. 6 mm A80 for steel and cast steel Characteristics The STEEL EDGE type is particularly well-suited to edge grinding and deburring work on steel and cast steel components Its applications also include grinding of chamfers in preparation for weld seams and grinding of contours The conical shape KE is designed for a comfortable working position when smoothing out a ridge on a surface Advantages: Long tool life and low tool wear due to hard, dimensionally stable bond. Economical to use due to the high edge stability even on low-speed tool drives. Particularly well suited to work on edges. ds: dsc: kts: shank cone shape 16x45 mm shank Ø 6 mm A80 for steel and cast steel kpn: KE 1645 6 AR 80 O5V kpn_dash: kpn_clear: KE16456AR80O5V bkpn: PFERD KE 1645 6 AR 80 O5V bkpn_clear: PFERD KE16456AR80O5V c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Mounted point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd mounted point | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Mounted grinding stone sr_no_br_cl_ns: 32210278 sr_ns: PFERD32210278
r: 08079152 p: 5.44 pid: 33223 b: PFERD q: 0 st: lt: 8 ean: 4007220505502 sr: PFERD 41120308 sr_no_br: 41120308 sr_no_br_cl: 41120308 sr_cl: PFERD41120308 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 25 mm Bore size 3 mm Width 3 mm n: PFERD 41120308 POLIFLEX disc SC Ø 25x3 mm bore dia. 3 mm binding TX A80 cn: GRINDING WHEEL cn2: GRINDING WHEEL cn_clear: GRINDINGWHEEL d: Product description PFERD Poliflex wheel SC dia. 25x3 mm centre hole dia. 3 mm bond TX A80 Characteristics Poliflex fine grinding tools are manufactured with high shape accuracy, outstandingly consistent quality and tight dimensional tolerances They are ideally suited to fine grinding, structuring and preparations for polishing work, and are very frequently used for tool and mould-making applications Poliflex fine grinding tools with the TX bond are manufactured with standard aluminium oxide The textile fabric inlays make the TX bond a very hard, sturdy bond Suitable for use on edges For fine peripheral grinding on small surfaces Advantages: Produces a fine, matt surface finish. Produces very good surface quality. High economic efficiency thanks to long tool life and high stock removal rate. Maximum working convenience through precise concentricity. ds: dsc: kts: POLIFLEX disc SC Ø 25x3 mm bore dia. 3 mm binding TX A80 kpn: 41120308 kpn_dash: kpn_clear: 41120308 bkpn: PFERD 41120308 bkpn_clear: PFERD 41120308 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Grinding wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd grinding wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Grinding wheel sr_no_br_cl_ns: 41120308 sr_ns: PFERD41120308
r: 04024374 p: 5.43 pid: 43018 b: PFERD q: 0 st: lt: 8 ean: 4007220440452 sr: PFERD 44691202 sr_no_br: 44691202 sr_no_br_cl: 44691202 sr_cl: PFERD44691202 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 25 mm Bore size 6 mm Width 25 mm Grit size Fine n: PFERD 44691202 POLINOX pressed fleece wheel PNER Ø 25x25 mm bore- Ø 6 mm medium hard A fine for finishing cn: GRINDING WHEEL cn2: GRINDING WHEEL cn_clear: GRINDINGWHEEL d: Product description PFERD POLINOX pressed non-woven wheel PNER dia. 25x25 mm centre hole dia. 6 mm medium-hard A fine for finishing Characteristics POLINOX unitized wheels PNER consist of multiple heavily compressed, non-woven layers, which are bonded together by a special grain/resin system The different combinations of compression, fibres, grain and the appropriate bond results in non-woven products that offer a very good surface finish, high stock removal rate and long tool life These tools can be used for a wide range of work on surfaces, from relatively coarse grinding to preparing the surface for polishing The version for straight grinders, flexible shafts and bench grinders is particularly suitable for working on smaller surfaces Medium-hard version with increased edge strength and tool life for coarse deburring and cleaning applications Advantages: High economic efficiency due to high abrasive performance and long tool life. Produces very good surface quality. Can be profiled as desired, enabling optimal adjustment to the contour. ds: dsc: kts: POLINOX pressed fleece wheel PNER Ø 25x25 mm bore- Ø 6 mm medium hard A fine for finishing kpn: 44691202 kpn_dash: kpn_clear: 44691202 bkpn: PFERD 44691202 bkpn_clear: PFERD 44691202 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Grinding wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd grinding wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Grinding wheel sr_no_br_cl_ns: 44691202 sr_ns: PFERD44691202
r: 08078179 p: 5.42 pid: 36576 b: PFERD q: 0 st: lt: 8 ean: 4007220620793 sr: PFERD 45005866 sr_no_br: 45005866 sr_no_br_cl: 45005866 sr_cl: PFERD45005866 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Width 100 mm Length 920 mm Grit size 60 n: PFERD 45005866 corundum grinding belt BA 100x920 mm A60 for universal use with belt grinder cn: SANDING BELT cn2: SANDING BELT cn_clear: SANDINGBELT d: Product description PFERD aluminium oxide abrasive belt BA 100x920mm A60 for general use with a belt grinder Characteristics For general applications from coarse to fine grinding Short belts are compatible with commonly available belt grinders In ISO 2976, they are listed under the designation ""abrasive belts"" Advantages: High tear strength with optimum flexibility. Consistent results through very good grain adhesion. High economic efficiency due to high abrasive performance and long tool life. ds: dsc: kts: corundum grinding belt BA 100x920 mm A60 for universal use with belt grinder kpn: 45005866 kpn_dash: kpn_clear: 45005866 bkpn: PFERD 45005866 bkpn_clear: PFERD 45005866 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Sanding belt | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd sanding belt | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Sanding belt sr_no_br_cl_ns: 45005866 sr_ns: PFERD45005866
r: 03208929 p: 5.41 pid: 32466 b: PFERD q: 0 st: lt: 13 ean: 4007220102510 sr: PFERD 44450060 sr_no_br: 44450060 sr_no_br_cl: 44450060 sr_cl: PFERD44450060 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 50 mm Connection type (machine) Shank Width 30 mm Connection size (machine) 6 mm Grit size 60 n: PFERD F 5030/6 SiC 60 flap brushes silicon carbide 50x30 mm, shank dia. 6 mm, grit 60 for hard non-ferrous metals - 44450060 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD SIC mounted flap wheel F dia. 50x30 mm shank dia. 6 mm SIC60 for hard non-ferrous metals Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general grinding work on components made from aluminium, copper, bronze, titanium and fibre-reinforced plastics Particularly recommended for use on titanium alloys Ideally suited to use in the aeronautical industry, especially where SiC is the only approved abrasive, e.g. for use on engine components Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes silicon carbide 50x30 mm, shank dia. 6 mm, grit 60 for hard non-ferrous metals kpn: F 5030/6 SiC 60 kpn_dash: kpn_clear: F50306SiC60 bkpn: PFERD F 5030/6 SiC 60 bkpn_clear: PFERD F50306SiC60 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44450060 sr_ns: PFERD44450060
r: 03194008 p: 5.41 pid: 67346 b: PFERD q: 0 st: lt: 6 ean: 4007220520079 sr: PFERD 62212523 sr_no_br: 62212523 sr_no_br_cl: 62212523 sr_cl: PFERD62212523 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: (Disc) diameter 125 mm Bore size 22,2 mm Connection type (disc) Bore Shape (grinding disc) Depressed centre For material Stainless steel Thickness 5,2 mm n: PFERD E 125-5,2 SG INOX grinding wheel 125x5,2x22,23 mm performance line for stainless steel - 62212523 cn: GRINDING DISC cn2: GRINDING DISC cn_clear: GRINDINGDISC d: Product description PFERD Grinding wheel E 125x5.2x22.23 mm Performance Line SG INOX for stainless steel Characteristics The broad range Performance Line SG offers a high-performance tool solution for every application and every material Performance Line SG tools achieve optimum results with maximum economic efficiency Grinding wheel for stainless steel (INOX) with high grinding performance and very good tool life Advantages: Soft grinding characteristics for cool grinding on stainless steel (INOX). Fast work progress and maximum economic efficiency thanks to the high grinding performance. Fewer tool changes due to the very good tool life. ds: dsc: kts: grinding wheel 125x5,2x22,23 mm performance line for stainless steel kpn: E 125-5,2 SG INOX kpn_dash: E 125 kpn_clear: E12552SGINOX bkpn: PFERD E 125-5,2 SG INOX bkpn_clear: PFERD E12552SGINOX c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Grinding disc | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd grinding disc | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Grinding disc sr_no_br_cl_ns: 62212523 sr_ns: PFERD62212523
r: 03208931 p: 5.41 pid: 32522 b: PFERD q: 0 st: lt: 14 ean: 4007220102626 sr: PFERD 44450120 sr_no_br: 44450120 sr_no_br_cl: 44450120 sr_cl: PFERD44450120 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 50 mm Connection type (machine) Shank Width 30 mm Connection size (machine) 6 mm Grit size 120 n: PFERD F 5030/6 SiC 120 flap disc silicon carbide 50x30 mm, shank dia. 6 mm, grain 120 for hard non-ferrous metals - 44450120 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD SIC mounted flap wheel F dia. 50x30 mm shank dia. 6 mm SIC120 for hard non-ferrous metals Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general grinding work on components made from aluminium, copper, bronze, titanium and fibre-reinforced plastics Particularly recommended for use on titanium alloys Ideally suited to use in the aeronautical industry, especially where SiC is the only approved abrasive, e.g. for use on engine components Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap disc silicon carbide 50x30 mm, shank dia. 6 mm, grain 120 for hard non-ferrous metals kpn: F 5030/6 SiC 120 kpn_dash: kpn_clear: F50306SiC120 bkpn: PFERD F 5030/6 SiC 120 bkpn_clear: PFERD F50306SiC120 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44450120 sr_ns: PFERD44450120
r: 57072472 p: 5.41 pid: 32081 b: PFERD q: 0 st: lt: 8 ean: 4007220100530 sr: PFERD 31382032 sr_no_br: 31382032 sr_no_br_cl: 31382032 sr_cl: PFERD31382032 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 50 mm Grit size 24 Shank size 8 mm Shape (grinding point) Cylinder Height 25 mm n: PFERD ZY 5025 8 ARN 24 K5V shank cylindrical 50x25 mm shank Ø 8 mm A24 for grey/lamellar and ductile cast iron - 31382032 cn: MOUNTED POINT cn2: MOUNTED POINT cn_clear: MOUNTEDPOINT d: Product description PFERD CAST mounted point cylindrical dia. 50x25 mm shank dia. 8 mm A24 for grey and nodular cast iron Characteristics The CAST design is particularly well-suited to surface work on grey and nodular cast iron in combination with high peripheral speeds Its applications include cleaning workpieces and grinding out shrinkage holes The cylindrical shape ZY is ideal for grinding bores, radii and contours Advantages: Suitable for use on surfaces and edges. High grinding performance and good tool life. High stock removal rates thanks to coarse grit size. ds: dsc: kts: shank cylindrical 50x25 mm shank Ø 8 mm A24 for grey/lamellar and ductile cast iron kpn: ZY 5025 8 ARN 24 K5V kpn_dash: kpn_clear: ZY50258ARN24K5V bkpn: PFERD ZY 5025 8 ARN 24 K5V bkpn_clear: PFERD ZY50258ARN24K5V c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Mounted point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd mounted point | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Mounted grinding stone sr_no_br_cl_ns: 31382032 sr_ns: PFERD31382032
r: 57072276 p: 5.41 pid: 31939 b: PFERD q: 0 st: lt: 8 ean: 4007220100332 sr: PFERD 31332272 sr_no_br: 31332272 sr_no_br_cl: 31332272 sr_cl: PFERD31332272 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 50 mm Grit size 24 Shank size 6 mm Shape (grinding point) Cylinder Height 25 mm n: PFERD ZY 5025 6 AR 24 O5V shank cylindrical 50x25 mm shank Ø 6 mm A24 for steel and cast steel - 31332272 cn: MOUNTED POINT cn2: MOUNTED POINT cn_clear: MOUNTEDPOINT d: Product description PFERD STEEL EDGE mounted point cylindrical dia. 50x25 mm shank dia. 6 mm A24 for steel and cast steel Characteristics The STEEL EDGE type is particularly well-suited to edge grinding and deburring work on steel and cast steel components Its applications also include grinding of chamfers in preparation for weld seams and grinding of contours The cylindrical shape ZY is ideal for grinding bores, radii and contours Advantages: Long tool life and low tool wear due to hard, dimensionally stable bond. Economical to use due to the high edge stability even on low-speed tool drives. Particularly well suited to work on edges. ds: dsc: kts: shank cylindrical 50x25 mm shank Ø 6 mm A24 for steel and cast steel kpn: ZY 5025 6 AR 24 O5V kpn_dash: kpn_clear: ZY50256AR24O5V bkpn: PFERD ZY 5025 6 AR 24 O5V bkpn_clear: PFERD ZY50256AR24O5V c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Mounted point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd mounted point | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Mounted grinding stone sr_no_br_cl_ns: 31332272 sr_ns: PFERD31332272
r: 57072133 p: 5.41 pid: 33510 b: PFERD q: 0 st: lt: 8 ean: 4007220100325 sr: PFERD 31332254 sr_no_br: 31332254 sr_no_br_cl: 31332254 sr_cl: PFERD31332254 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 50 mm Grit size 46 Shank size 6 mm Shape (grinding point) Cylinder Height 25 mm n: PFERD ZY 5025 6 ADW 46 M5V shank cylindrical 50x25 mm shank Ø 6 mm A46 for steel and cast steel - 31332254 cn: MOUNTED POINT cn2: MOUNTED POINT cn_clear: MOUNTEDPOINT d: Product description PFERD STEEL mounted point cylindrical dia. 50x25 mm shank dia. 6 mm A46 for steel and cast steel Characteristics The STEEL type is the most general bond for machining steel and cast steel It is extremely well suited to grinding high-speed steel (HSS) moulded parts and weld dressing of weld seams on steel constructions The cylindrical shape ZY is ideal for grinding bores, radii and contours Advantages: High grinding performance and stock removal rate in general use on steel materials. Shortened grinding times and thus cost savings due to the high stock removal rate. Particularly suitable for work on surfaces and edges. ds: dsc: kts: shank cylindrical 50x25 mm shank Ø 6 mm A46 for steel and cast steel kpn: ZY 5025 6 ADW 46 M5V kpn_dash: kpn_clear: ZY50256ADW46M5V bkpn: PFERD ZY 5025 6 ADW 46 M5V bkpn_clear: PFERD ZY50256ADW46M5V c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Mounted point | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd mounted point | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Mounted grinding stone sr_no_br_cl_ns: 31332254 sr_ns: PFERD31332254
r: 03208932 p: 5.41 pid: 34913 b: PFERD q: 0 st: lt: 13 ean: 4007220102633 sr: PFERD 44450150 sr_no_br: 44450150 sr_no_br_cl: 44450150 sr_cl: PFERD44450150 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 50 mm Connection type (machine) Shank Width 30 mm Connection size (machine) 6 mm Grit size 150 n: PFERD F 5030/6 SiC 150 flap brushes silicon carbide 50x30 mm, shank dia. 6 mm, grain 150 for hard non-ferrous metals - 44450150 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD SIC mounted flap wheel F dia. 50x30 mm shank dia. 6 mm SIC150 for hard non-ferrous metals Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general grinding work on components made from aluminium, copper, bronze, titanium and fibre-reinforced plastics Particularly recommended for use on titanium alloys Ideally suited to use in the aeronautical industry, especially where SiC is the only approved abrasive, e.g. for use on engine components Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap brushes silicon carbide 50x30 mm, shank dia. 6 mm, grain 150 for hard non-ferrous metals kpn: F 5030/6 SiC 150 kpn_dash: kpn_clear: F50306SiC150 bkpn: PFERD F 5030/6 SiC 150 bkpn_clear: PFERD F50306SiC150 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44450150 sr_ns: PFERD44450150
r: 03208930 p: 5.41 pid: 33407 b: PFERD q: 0 st: lt: 13 ean: 4007220102572 sr: PFERD 44450080 sr_no_br: 44450080 sr_no_br_cl: 44450080 sr_cl: PFERD44450080 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (flap wheel) 50 mm Connection type (machine) Shank Width 30 mm Connection size (machine) 6 mm Grit size 80 n: PFERD F 5030/6 SiC 80 flap disc silicon carbide 50x30 mm, shank dia. 6 mm, grit 80 for hard non-ferrous metals - 44450080 cn: FLAP WHEEL cn2: FLAP WHEEL cn_clear: FLAPWHEEL d: Product description PFERD SIC mounted flap wheel F dia. 50x30 mm shank dia. 6 mm SIC80 for hard non-ferrous metals Characteristics On mounted flap wheels, the flaps made of coated abrasive are arranged radially around the tool axis in a fan-type structure Their flexibility enables them to adapt perfectly to the contours of the workpiece The abrasive grain is embedded in the sturdy, flexible cloth backing material by means of a resinoid bond In ISO 3919, mounted flap wheels are designated as ""flap wheels with shaft"" For general grinding work on components made from aluminium, copper, bronze, titanium and fibre-reinforced plastics Particularly recommended for use on titanium alloys Ideally suited to use in the aeronautical industry, especially where SiC is the only approved abrasive, e.g. for use on engine components Advantages: Highly flexible, enabling optimal adjustment to the contour. Consistently high stock removal rate over the entire tool life as new, aggressive abrasive is constantly exposed. Can be used face-down very close to edges and in corners thanks to the flat, moulded-core design. ds: dsc: kts: flap disc silicon carbide 50x30 mm, shank dia. 6 mm, grit 80 for hard non-ferrous metals kpn: F 5030/6 SiC 80 kpn_dash: kpn_clear: F50306SiC80 bkpn: PFERD F 5030/6 SiC 80 bkpn_clear: PFERD F50306SiC80 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Flap wheel | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd flap wheel | Home / Promotions / Promotions / Volume discounts on lubricants and sealants / Flap wheel sr_no_br_cl_ns: 44450080 sr_ns: PFERD44450080
