r: 08077969 p: 419.32 pid: 37044 b: PFERD q: 0 st: lt: 8 ean: 4007220038505 sr: PFERD 79183745 sr_no_br: 79183745 sr_no_br_cl: 79183745 sr_cl: PFERD79183745 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 250 mm Connection type (machine) Bore Material (brush filament) Silicon carbide Wire thickness 1,14 mm Twisted No Thickness 25 mm Max. no-load speed 3600 rpm Connection size (machine) 50,8 mm n: PFERD 25025/50,8 REC SiC 80 1,14 FLEX COMPOSITE FLEx round brush RBUP Ø 250x25x50,8mm bore SiC filament wire-Ø 1,14mm grit 80 stat. - 79183745 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD COMPOSITE FLEX wheel brush RBUP dia. 250x25x50.8 mm hole SiC filament dia. 1.14 mm grit 80 stationary Characteristics Particularly flexible brush Its plastic filament makes this product particularly suitable for deburring complicated components such as cylinder heads or gear toothing Developed specially for industrial use Composite brushes from PFERD have been specifically developed for industrial, automated use They are suitable for a variety of applications and their variable clamping options mean that they can be used on many different drive systems This offers the advantage that the workpiece can be produced and finished on the same machine As a result, labour-intensive, manual work is reduced and reproducible results are achieved with short cycle times For efficient use, numerous application parameters such as the processing time and feed rate must be coordinated with each other and a suitable brush must be selected Brushes with silicon carbide (SiC) are particularly well suited to deburring work and surface improvement Rectangular filament [REC] is suited to applications that place particular demands on the aggressiveness of the brush The larger cross-section of the filaments means that these are more stiff than round filaments and provide a greater contact area with the workpiece Plastic filament withstands temperatures up to 220 °C Advantages: Long tool life and aggressive brushing effect due to a very high filament density. Extremely smooth operation due to even distribution of the filament material. Highly flexible, enabling optimal adjustment to the workpiece contour and less heat build-up. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. For aggressive work thanks to rectangular filament (REC). ds: dsc: kts: COMPOSITE FLEx round brush RBUP Ø 250x25x50,8mm bore SiC filament wire-Ø 1,14mm grit 80 stat. kpn: 25025/50,8 REC SiC 80 1,14 FLEX kpn_dash: kpn_clear: 25025508RECSiC80114FLEX bkpn: PFERD 25025/50,8 REC SiC 80 1,14 FLEX bkpn_clear: PFERD 25025508RECSiC80114FLEX c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 79183745 sr_ns: PFERD79183745
r: 08077968 p: 419.32 pid: 35314 b: PFERD q: 0 st: lt: 8 ean: 4007220956601 sr: PFERD 79183739 sr_no_br: 79183739 sr_no_br_cl: 79183739 sr_cl: PFERD79183739 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 250 mm Connection type (machine) Bore Material (brush filament) Silicon carbide Wire thickness 1 mm Twisted No Thickness 25 mm Max. no-load speed 3600 rpm Connection size (machine) 50,8 mm n: PFERD 25025/50,8 REC SiC 80 1,14 COMPOSITE round brush RBUP Ø 250 x 25 x 50.8 mm bore SiC filament wire-Ø 1.14 mm grit 80 stat. - 79183739 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD COMPOSITE wheel brush RBUP dia. 250x25x50.8 mm hole SiC filament dia. 1.14 mm grit 80 stationary Characteristics Particularly aggressive brush Its plastic filament makes this product particularly suitable for deburring complicated components such as cylinder heads or gear toothing, as well as for working on surfaces Developed specially for industrial use Composite brushes from PFERD have been specifically developed for industrial, automated use They are suitable for a variety of applications and their variable clamping options mean that they can be used on many different drive systems This offers the advantage that the workpiece can be produced and finished on the same machine As a result, labour-intensive, manual work is reduced and reproducible results are achieved with short cycle times For efficient use, numerous application parameters such as the processing time and feed rate must be coordinated with each other and a suitable brush must be selected Brushes with silicon carbide (SiC) are particularly well suited to deburring work and surface improvement Rectangular filament [REC] is suited to applications that place particular demands on the aggressiveness of the brush The larger cross-section of the filaments means that these are more stiff than round filaments and provide a greater contact area with the workpiece Plastic filament withstands temperatures up to 220 °C Advantages: Long tool life and aggressive brushing effect due to a very high filament density. Extremely smooth operation due to even distribution of the filament material. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. For aggressive work thanks to rectangular filament (REC). ds: dsc: kts: COMPOSITE round brush RBUP Ø 250 x 25 x 50.8 mm bore SiC filament wire-Ø 1.14 mm grit 80 stat. kpn: 25025/50,8 REC SiC 80 1,14 kpn_dash: kpn_clear: 25025508RECSiC80114 bkpn: PFERD 25025/50,8 REC SiC 80 1,14 bkpn_clear: PFERD 25025508RECSiC80114 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 79183739 sr_ns: PFERD79183739
r: 03180412 p: 407.74 pid: 70130 b: PFERD q: 0 st: lt: 8 ean: 4007220807149 sr: PFERD 43506712 sr_no_br: 43506712 sr_no_br_cl: 43506712 sr_cl: PFERD43506712 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 250 mm Connection type (machine) Bore Material (brush filament) Stainless steel Wire thickness 0,35 mm Twisted No Thickness 60 mm Max. no-load speed 3600 rpm Connection size (machine) 50,8 mm n: PFERD 25060/50,8 INOX 0,35 deburring brush, knotted type RBU Ø 250 x 60 x 50.8 mm bore stainless steel wire dia. 0.35 mm stationary - 43506712 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD Deburring brush crimped RBU dia. 250x60x50.8 mm hole stainless steel wire dia. 0.35 mm stationary Characteristics Particularly suitable for deburring pipes, cut edges and small parts on stationary machines In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: Individual check for imbalance guarantees smooth running. Maximum tool life thanks to high filament density. Very good corrosion resistance. Creates fine surfaces. ds: dsc: kts: deburring brush, knotted type RBU Ø 250 x 60 x 50.8 mm bore stainless steel wire dia. 0.35 mm stationary kpn: 25060/50,8 INOX 0,35 kpn_dash: kpn_clear: 25060508INOX035 bkpn: PFERD 25060/50,8 INOX 0,35 bkpn_clear: PFERD 25060508INOX035 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43506712 sr_ns: PFERD43506712
r: 08077976 p: 395.59 pid: 35541 b: PFERD q: 0 st: lt: 8 ean: 4007220956632 sr: PFERD 79183738 sr_no_br: 79183738 sr_no_br_cl: 79183738 sr_cl: PFERD79183738 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 250 mm Connection type (machine) Bore Material (brush filament) Silicon carbide Wire thickness 0,9 mm Twisted No Thickness 25 mm Max. no-load speed 3600 rpm Connection size (machine) 50,8 mm n: PFERD 25025/50,8 SiC 80 1,10 COMPOSITE round brush RBUP Ø 250 x 25 x 50.8 mm bore SiC filament wire-Ø 1.10 mm grit 80 stationary - 79183738 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD COMPOSITE wheel brush RBUP dia. 250x25x50.8 mm hole SiC filament dia. 1.10 mm grit 80 stationary Characteristics Particularly aggressive brush Its plastic filament makes this product particularly suitable for deburring complicated components such as cylinder heads or gear toothing, as well as for working on surfaces Developed specially for industrial use Composite brushes from PFERD have been specifically developed for industrial, automated use They are suitable for a variety of applications and their variable clamping options mean that they can be used on many different drive systems This offers the advantage that the workpiece can be produced and finished on the same machine As a result, labour-intensive, manual work is reduced and reproducible results are achieved with short cycle times For efficient use, numerous application parameters such as the processing time and feed rate must be coordinated with each other and a suitable brush must be selected Brushes with silicon carbide (SiC) are particularly well suited to deburring work and surface improvement Plastic filament withstands temperatures up to 220 °C Advantages: Long tool life and aggressive brushing effect due to a very high filament density. Extremely smooth operation due to even distribution of the filament material. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. ds: dsc: kts: COMPOSITE round brush RBUP Ø 250 x 25 x 50.8 mm bore SiC filament wire-Ø 1.10 mm grit 80 stationary kpn: 25025/50,8 SiC 80 1,10 kpn_dash: kpn_clear: 25025508SiC80110 bkpn: PFERD 25025/50,8 SiC 80 1,10 bkpn_clear: PFERD 25025508SiC80110 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 79183738 sr_ns: PFERD79183738
r: 08077977 p: 395.59 pid: 37058 b: PFERD q: 0 st: lt: 8 ean: 4007220038499 sr: PFERD 79183744 sr_no_br: 79183744 sr_no_br_cl: 79183744 sr_cl: PFERD79183744 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 250 mm Connection type (machine) Bore Material (brush filament) Silicon carbide Wire thickness 1,1 mm Twisted No Thickness 25 mm Max. no-load speed 3600 rpm Connection size (machine) 50,8 mm n: PFERD 25025/50,8 SiC 80 1,10 FLEX COMPOSITE FLEx round brush RBUP Ø 250x25x50.8 mm bore SiC filament wire-Ø 1.00 mm grit 80 stat. - 79183744 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD COMPOSITE FLEX wheel brush RBUP dia. 250x25x50.8 mm hole SiC filament dia. 1.00 mm grit 80 stationary Characteristics Particularly flexible brush Its plastic filament makes this product particularly suitable for deburring complicated components such as cylinder heads or gear toothing Developed specially for industrial use Composite brushes from PFERD have been specifically developed for industrial, automated use They are suitable for a variety of applications and their variable clamping options mean that they can be used on many different drive systems This offers the advantage that the workpiece can be produced and finished on the same machine As a result, labour-intensive, manual work is reduced and reproducible results are achieved with short cycle times For efficient use, numerous application parameters such as the processing time and feed rate must be coordinated with each other and a suitable brush must be selected Brushes with silicon carbide (SiC) are particularly well suited to deburring work and surface improvement Plastic filament withstands temperatures up to 220 °C Advantages: Long tool life and aggressive brushing effect due to a very high filament density. Extremely smooth operation due to even distribution of the filament material. Highly flexible, enabling optimal adjustment to the workpiece contour and less heat build-up. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. ds: dsc: kts: COMPOSITE FLEx round brush RBUP Ø 250x25x50.8 mm bore SiC filament wire-Ø 1.00 mm grit 80 stat. kpn: 25025/50,8 SiC 80 1,10 FLEX kpn_dash: kpn_clear: 25025508SiC80110FLEX bkpn: PFERD 25025/50,8 SiC 80 1,10 FLEX bkpn_clear: PFERD 25025508SiC80110FLEX c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 79183744 sr_ns: PFERD79183744
r: 08077973 p: 395.59 pid: 35318 b: PFERD q: 0 st: lt: 8 ean: 4007220038666 sr: PFERD 79183657 sr_no_br: 79183657 sr_no_br_cl: 79183657 sr_cl: PFERD79183657 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 250 mm Connection type (machine) Bore Material (brush filament) Silicon carbide Wire thickness 0,9 mm Twisted No Thickness 25 mm Max. no-load speed 3600 rpm Connection size (machine) 50,8 mm n: PFERD 25025/50,8 SiC 180 0,90 FLEX COMPOSITE FLEx round brush RBUP Ø 250x25x50.8 mm bore SiC filament wire-Ø 0.90 mm grit 180 stat. - 79183657 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD COMPOSITE FLEX wheel brush RBUP dia. 250x25x50.8 mm hole SiC filament dia. 0.90 mm grit 180 stationary Characteristics Particularly flexible brush Its plastic filament makes this product particularly suitable for deburring complicated components such as cylinder heads or gear toothing Developed specially for industrial use Composite brushes from PFERD have been specifically developed for industrial, automated use They are suitable for a variety of applications and their variable clamping options mean that they can be used on many different drive systems This offers the advantage that the workpiece can be produced and finished on the same machine As a result, labour-intensive, manual work is reduced and reproducible results are achieved with short cycle times For efficient use, numerous application parameters such as the processing time and feed rate must be coordinated with each other and a suitable brush must be selected Brushes with silicon carbide (SiC) are particularly well suited to deburring work and surface improvement Plastic filament withstands temperatures up to 220 °C Advantages: Long tool life and aggressive brushing effect due to a very high filament density. Extremely smooth operation due to even distribution of the filament material. Highly flexible, enabling optimal adjustment to the workpiece contour and less heat build-up. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. ds: dsc: kts: COMPOSITE FLEx round brush RBUP Ø 250x25x50.8 mm bore SiC filament wire-Ø 0.90 mm grit 180 stat. kpn: 25025/50,8 SiC 180 0,90 FLEX kpn_dash: kpn_clear: 25025508SiC180090FLEX bkpn: PFERD 25025/50,8 SiC 180 0,90 FLEX bkpn_clear: PFERD 25025508SiC180090FLEX c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 79183657 sr_ns: PFERD79183657
r: 08077970 p: 395.59 pid: 34987 b: PFERD q: 0 st: lt: 8 ean: 4007220039175 sr: PFERD 79183742 sr_no_br: 79183742 sr_no_br_cl: 79183742 sr_cl: PFERD79183742 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 250 mm Connection type (machine) Bore Material (brush filament) Silicon carbide Wire thickness 0,55 mm Twisted No Thickness 25 mm Max. no-load speed 3600 rpm Connection size (machine) 50,8 mm n: PFERD 25025/50,8 SiC 120 0,55 COMPOSITE round brush RBUP Ø 250 x 25 x 50.8 mm bore SiC filament wire-Ø 0.55 mm grit 120 stationary - 79183742 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD COMPOSITE wheel brush RBUP dia. 250x25x50.8 mm hole SiC filament dia. 0.55 mm grit 120 stationary Characteristics Particularly aggressive brush Its plastic filament makes this product particularly suitable for deburring complicated components such as cylinder heads or gear toothing, as well as for working on surfaces Developed specially for industrial use Composite brushes from PFERD have been specifically developed for industrial, automated use They are suitable for a variety of applications and their variable clamping options mean that they can be used on many different drive systems This offers the advantage that the workpiece can be produced and finished on the same machine As a result, labour-intensive, manual work is reduced and reproducible results are achieved with short cycle times For efficient use, numerous application parameters such as the processing time and feed rate must be coordinated with each other and a suitable brush must be selected Brushes with silicon carbide (SiC) are particularly well suited to deburring work and surface improvement Plastic filament withstands temperatures up to 220 °C Advantages: Long tool life and aggressive brushing effect due to a very high filament density. Extremely smooth operation due to even distribution of the filament material. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. ds: dsc: kts: COMPOSITE round brush RBUP Ø 250 x 25 x 50.8 mm bore SiC filament wire-Ø 0.55 mm grit 120 stationary kpn: 25025/50,8 SiC 120 0,55 kpn_dash: kpn_clear: 25025508SiC120055 bkpn: PFERD 25025/50,8 SiC 120 0,55 bkpn_clear: PFERD 25025508SiC120055 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 79183742 sr_ns: PFERD79183742
r: 08077972 p: 395.59 pid: 37049 b: PFERD q: 0 st: lt: 8 ean: 4007220038871 sr: PFERD 79183746 sr_no_br: 79183746 sr_no_br_cl: 79183746 sr_cl: PFERD79183746 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 250 mm Connection type (machine) Bore Material (brush filament) Silicon carbide Wire thickness 1,1 mm Twisted No Thickness 25 mm Max. no-load speed 3600 rpm Connection size (machine) 50,8 mm n: PFERD 25025/50,8 SiC 120 1,10 FLEX COMPOSITE FLEx round brush RBUP Ø 250x25x50.8 mm bore SiC filament wire-Ø 1.00 mm grit 120 stat. - 79183746 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD COMPOSITE FLEX wheel brush RBUP dia. 250x25x50.8 mm hole SiC filament dia. 1.00 mm grit 120 stationary Characteristics Particularly flexible brush Its plastic filament makes this product particularly suitable for deburring complicated components such as cylinder heads or gear toothing Developed specially for industrial use Composite brushes from PFERD have been specifically developed for industrial, automated use They are suitable for a variety of applications and their variable clamping options mean that they can be used on many different drive systems This offers the advantage that the workpiece can be produced and finished on the same machine As a result, labour-intensive, manual work is reduced and reproducible results are achieved with short cycle times For efficient use, numerous application parameters such as the processing time and feed rate must be coordinated with each other and a suitable brush must be selected Brushes with silicon carbide (SiC) are particularly well suited to deburring work and surface improvement Plastic filament withstands temperatures up to 220 °C Advantages: Long tool life and aggressive brushing effect due to a very high filament density. Extremely smooth operation due to even distribution of the filament material. Highly flexible, enabling optimal adjustment to the workpiece contour and less heat build-up. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. ds: dsc: kts: COMPOSITE FLEx round brush RBUP Ø 250x25x50.8 mm bore SiC filament wire-Ø 1.00 mm grit 120 stat. kpn: 25025/50,8 SiC 120 1,10 FLEX kpn_dash: kpn_clear: 25025508SiC120110FLEX bkpn: PFERD 25025/50,8 SiC 120 1,10 FLEX bkpn_clear: PFERD 25025508SiC120110FLEX c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 79183746 sr_ns: PFERD79183746
r: 08077971 p: 395.59 pid: 34464 b: PFERD q: 0 st: lt: 8 ean: 4007220956663 sr: PFERD 79183740 sr_no_br: 79183740 sr_no_br_cl: 79183740 sr_cl: PFERD79183740 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 250 mm Connection type (machine) Bore Material (brush filament) Silicon carbide Wire thickness 1,1 mm Twisted No Thickness 25 mm Max. no-load speed 3600 rpm Connection size (machine) 50,8 mm n: PFERD 25025/50,8 SiC 120 1,10 COMPOSITE round brush RBUP Ø 250 x 25 x 50.8 mm bore SiC filament wire-Ø 1.10 m grit 120 stationary - 79183740 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD COMPOSITE wheel brush RBUP dia. 250x25x50.8 mm hole SiC filament dia. 1.10 m grit 120 stationary Characteristics Particularly aggressive brush Its plastic filament makes this product particularly suitable for deburring complicated components such as cylinder heads or gear toothing, as well as for working on surfaces Developed specially for industrial use Composite brushes from PFERD have been specifically developed for industrial, automated use They are suitable for a variety of applications and their variable clamping options mean that they can be used on many different drive systems This offers the advantage that the workpiece can be produced and finished on the same machine As a result, labour-intensive, manual work is reduced and reproducible results are achieved with short cycle times For efficient use, numerous application parameters such as the processing time and feed rate must be coordinated with each other and a suitable brush must be selected Brushes with silicon carbide (SiC) are particularly well suited to deburring work and surface improvement Plastic filament withstands temperatures up to 220 °C Advantages: Long tool life and aggressive brushing effect due to a very high filament density. Extremely smooth operation due to even distribution of the filament material. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. ds: dsc: kts: COMPOSITE round brush RBUP Ø 250 x 25 x 50.8 mm bore SiC filament wire-Ø 1.10 m grit 120 stationary kpn: 25025/50,8 SiC 120 1,10 kpn_dash: kpn_clear: 25025508SiC120110 bkpn: PFERD 25025/50,8 SiC 120 1,10 bkpn_clear: PFERD 25025508SiC120110 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 79183740 sr_ns: PFERD79183740
r: 08077974 p: 395.59 pid: 37054 b: PFERD q: 0 st: lt: 8 ean: 4007220956694 sr: PFERD 79183741 sr_no_br: 79183741 sr_no_br_cl: 79183741 sr_cl: PFERD79183741 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 250 mm Connection type (machine) Bore Material (brush filament) Silicon carbide Wire thickness 0,55 mm Twisted No Thickness 25 mm Max. no-load speed 3600 rpm Connection size (machine) 50,8 mm n: PFERD 25025/50,8 SiC 320 0,55 COMPOSITE round brush RBUP Ø 250 x 25 x 50.8 mm bore SiC filament wire-Ø 0.55 mm grit 320 stationary - 79183741 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD COMPOSITE wheel brush RBUP dia. 250x25x50.8 mm hole SiC filament dia. 0.55 mm grit 320 stationary Characteristics Particularly aggressive brush Its plastic filament makes this product particularly suitable for deburring complicated components such as cylinder heads or gear toothing, as well as for working on surfaces Developed specially for industrial use Composite brushes from PFERD have been specifically developed for industrial, automated use They are suitable for a variety of applications and their variable clamping options mean that they can be used on many different drive systems This offers the advantage that the workpiece can be produced and finished on the same machine As a result, labour-intensive, manual work is reduced and reproducible results are achieved with short cycle times For efficient use, numerous application parameters such as the processing time and feed rate must be coordinated with each other and a suitable brush must be selected Brushes with silicon carbide (SiC) are particularly well suited to deburring work and surface improvement Plastic filament withstands temperatures up to 220 °C Advantages: Long tool life and aggressive brushing effect due to a very high filament density. Extremely smooth operation due to even distribution of the filament material. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. ds: dsc: kts: COMPOSITE round brush RBUP Ø 250 x 25 x 50.8 mm bore SiC filament wire-Ø 0.55 mm grit 320 stationary kpn: 25025/50,8 SiC 320 0,55 kpn_dash: kpn_clear: 25025508SiC320055 bkpn: PFERD 25025/50,8 SiC 320 0,55 bkpn_clear: PFERD 25025508SiC320055 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 79183741 sr_ns: PFERD79183741
r: 08077975 p: 395.59 pid: 34993 b: PFERD q: 0 st: lt: 8 ean: 4007220039168 sr: PFERD 79183747 sr_no_br: 79183747 sr_no_br_cl: 79183747 sr_cl: PFERD79183747 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 250 mm Connection type (machine) Bore Material (brush filament) Silicon carbide Wire thickness 0,55 mm Twisted No Thickness 25 mm Max. no-load speed 3600 rpm Connection size (machine) 50,8 mm n: PFERD 25025/50,8 SiC 320 0,55 FLEX COMPOSITE FLEx round brush RBUP Ø 250x25x50.8 mm bore SiC filament wire-Ø 0.55 mm grit 320 stat. - 79183747 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD COMPOSITE FLEX wheel brush RBUP dia. 250x25x50.8 mm hole SiC filament dia. 0.55 mm grit 320 stationary Characteristics Particularly flexible brush Its plastic filament makes this product particularly suitable for deburring complicated components such as cylinder heads or gear toothing Developed specially for industrial use Composite brushes from PFERD have been specifically developed for industrial, automated use They are suitable for a variety of applications and their variable clamping options mean that they can be used on many different drive systems This offers the advantage that the workpiece can be produced and finished on the same machine As a result, labour-intensive, manual work is reduced and reproducible results are achieved with short cycle times For efficient use, numerous application parameters such as the processing time and feed rate must be coordinated with each other and a suitable brush must be selected Brushes with silicon carbide (SiC) are particularly well suited to deburring work and surface improvement Plastic filament withstands temperatures up to 220 °C Advantages: Long tool life and aggressive brushing effect due to a very high filament density. Extremely smooth operation due to even distribution of the filament material. Highly flexible, enabling optimal adjustment to the workpiece contour and less heat build-up. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. ds: dsc: kts: COMPOSITE FLEx round brush RBUP Ø 250x25x50.8 mm bore SiC filament wire-Ø 0.55 mm grit 320 stat. kpn: 25025/50,8 SiC 320 0,55 FLEX kpn_dash: kpn_clear: 25025508SiC320055FLEX bkpn: PFERD 25025/50,8 SiC 320 0,55 FLEX bkpn_clear: PFERD 25025508SiC320055FLEX c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 79183747 sr_ns: PFERD79183747
r: 08077953 p: 393.35 pid: 37009 b: PFERD q: 0 st: lt: 8 ean: 4007220956717 sr: PFERD 79184169 sr_no_br: 79184169 sr_no_br_cl: 79184169 sr_cl: PFERD79184169 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 200 mm Connection type (machine) Bore Material (brush filament) Plastic Wire thickness 1,1 mm Twisted No Thickness 25 mm Max. no-load speed 3600 rpm Connection size (machine) 50,8 mm n: PFERD 20025/50,8 CO 80 1,10 COMPOSITE round brush RBUP Ø 200 x 25 x 50,8 mm bore ker. filament wire-Ø 1,10 mm grit 80 stationary - 79184169 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD COMPOSITE wheel brush RBUP dia. 200x25x50.8 mm hole ceramic filament dia. 1.10 mm grit 80 stationary Characteristics Particularly aggressive brush Its plastic filament makes this product particularly suitable for deburring complicated components such as cylinder heads or gear toothing, as well as for working on surfaces Developed specially for industrial use Composite brushes from PFERD have been specifically developed for industrial, automated use They are suitable for a variety of applications and their variable clamping options mean that they can be used on many different drive systems This offers the advantage that the workpiece can be produced and finished on the same machine As a result, labour-intensive, manual work is reduced and reproducible results are achieved with short cycle times For efficient use, numerous application parameters such as the processing time and feed rate must be coordinated with each other and a suitable brush must be selected Brushes with ceramic oxide grain (CO) offer good toughness and excellent sharpness For high stock removal values and aggressive brushing behaviour Plastic filament withstands temperatures up to 220 °C Advantages: Long tool life and aggressive brushing effect due to a very high filament density. Extremely smooth operation due to even distribution of the filament material. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. For particularly aggressive machining and for giving the workpiece a high surface quality. ds: dsc: kts: COMPOSITE round brush RBUP Ø 200 x 25 x 50,8 mm bore ker. filament wire-Ø 1,10 mm grit 80 stationary kpn: 20025/50,8 CO 80 1,10 kpn_dash: kpn_clear: 20025508CO80110 bkpn: PFERD 20025/50,8 CO 80 1,10 bkpn_clear: PFERD 20025508CO80110 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 79184169 sr_ns: PFERD79184169
r: 08077964 p: 382.33 pid: 35536 b: PFERD q: 0 st: lt: 8 ean: 4007220159965 sr: PFERD 79184133 sr_no_br: 79184133 sr_no_br_cl: 79184133 sr_cl: PFERD79184133 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 250 mm Connection type (machine) Bore Material (brush filament) Plastic Wire thickness 1,1 mm Twisted No Thickness 13 mm Max. no-load speed 3600 rpm Connection size (machine) 50,8 mm n: PFERD 25013/50,8 CO 80 1,10 FLEX COMPOSITE FLE x round brush RBUP Ø 250 x 13 x 50.8 mm ker. filament wire-Ø 1.10 mm grit 80 stat. - 79184133 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD COMPOSITE FLEX wheel brush RBUP dia. 250x13x50.8 mm ceramic filament dia. 1.10 mm grit 80 stationary Characteristics Particularly flexible brush Its plastic filament makes this product particularly suitable for deburring complicated components such as cylinder heads or gear toothing Developed specially for industrial use Composite brushes from PFERD have been specifically developed for industrial, automated use They are suitable for a variety of applications and their variable clamping options mean that they can be used on many different drive systems This offers the advantage that the workpiece can be produced and finished on the same machine As a result, labour-intensive, manual work is reduced and reproducible results are achieved with short cycle times For efficient use, numerous application parameters such as the processing time and feed rate must be coordinated with each other and a suitable brush must be selected Brushes with ceramic oxide grain (CO) offer good toughness and excellent sharpness For high stock removal values and aggressive brushing behaviour Plastic filament withstands temperatures up to 220 °C Advantages: Long tool life and aggressive brushing effect due to a very high filament density. Extremely smooth operation due to even distribution of the filament material. Highly flexible, enabling optimal adjustment to the workpiece contour and less heat build-up. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. For particularly aggressive machining and for giving the workpiece a high surface quality. ds: dsc: kts: COMPOSITE FLE x round brush RBUP Ø 250 x 13 x 50.8 mm ker. filament wire-Ø 1.10 mm grit 80 stat. kpn: 25013/50,8 CO 80 1,10 FLEX kpn_dash: kpn_clear: 25013508CO80110FLEX bkpn: PFERD 25013/50,8 CO 80 1,10 FLEX bkpn_clear: PFERD 25013508CO80110FLEX c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 79184133 sr_ns: PFERD79184133
r: 08077962 p: 382.33 pid: 34457 b: PFERD q: 0 st: lt: 8 ean: 4007220159972 sr: PFERD 79184138 sr_no_br: 79184138 sr_no_br_cl: 79184138 sr_cl: PFERD79184138 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 250 mm Connection type (machine) Bore Material (brush filament) Plastic Wire thickness 0,55 mm Twisted No Thickness 13 mm Max. no-load speed 3600 rpm Connection size (machine) 50,8 mm n: PFERD 25013/50,8 CO 120 0,55 FLEX COMPOSITE FLE x round brush RBUP Ø 250 x 13 x 50,8 mm ker. filament wire-Ø 0,55 mm grit 120 stat. - 79184138 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD COMPOSITE FLEX wheel brush RBUP dia. 250x13x50.8 mm ceramic filament dia. 0.55 mm grit 120 stationary Characteristics Particularly flexible brush Its plastic filament makes this product particularly suitable for deburring complicated components such as cylinder heads or gear toothing Developed specially for industrial use Composite brushes from PFERD have been specifically developed for industrial, automated use They are suitable for a variety of applications and their variable clamping options mean that they can be used on many different drive systems This offers the advantage that the workpiece can be produced and finished on the same machine As a result, labour-intensive, manual work is reduced and reproducible results are achieved with short cycle times For efficient use, numerous application parameters such as the processing time and feed rate must be coordinated with each other and a suitable brush must be selected Brushes with ceramic oxide grain (CO) offer good toughness and excellent sharpness For high stock removal values and aggressive brushing behaviour Plastic filament withstands temperatures up to 220 °C Advantages: Long tool life and aggressive brushing effect due to a very high filament density. Extremely smooth operation due to even distribution of the filament material. Highly flexible, enabling optimal adjustment to the workpiece contour and less heat build-up. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. For particularly aggressive machining and for giving the workpiece a high surface quality. ds: dsc: kts: COMPOSITE FLE x round brush RBUP Ø 250 x 13 x 50,8 mm ker. filament wire-Ø 0,55 mm grit 120 stat. kpn: 25013/50,8 CO 120 0,55 FLEX kpn_dash: kpn_clear: 25013508CO120055FLEX bkpn: PFERD 25013/50,8 CO 120 0,55 FLEX bkpn_clear: PFERD 25013508CO120055FLEX c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 79184138 sr_ns: PFERD79184138
r: 08077963 p: 382.33 pid: 34460 b: PFERD q: 0 st: lt: 8 ean: 4007220159989 sr: PFERD 79184139 sr_no_br: 79184139 sr_no_br_cl: 79184139 sr_cl: PFERD79184139 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 250 mm Connection type (machine) Bore Material (brush filament) Plastic Wire thickness 1,1 mm Twisted No Thickness 13 mm Max. no-load speed 3600 rpm Connection size (machine) 50,8 mm n: PFERD 25013/50,8 CO 120 1,10 FLEX COMPOSITE FLE x round brush RBUP Ø 250 x 13 x 50.8 mm ker. filament wire-Ø 1.10 mm grit 120 stat. - 79184139 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD COMPOSITE FLEX wheel brush RBUP dia. 250x13x50.8 mm ceramic filament dia. 1.10 mm grit 120 stationary Characteristics Particularly flexible brush Its plastic filament makes this product particularly suitable for deburring complicated components such as cylinder heads or gear toothing Developed specially for industrial use Composite brushes from PFERD have been specifically developed for industrial, automated use They are suitable for a variety of applications and their variable clamping options mean that they can be used on many different drive systems This offers the advantage that the workpiece can be produced and finished on the same machine As a result, labour-intensive, manual work is reduced and reproducible results are achieved with short cycle times For efficient use, numerous application parameters such as the processing time and feed rate must be coordinated with each other and a suitable brush must be selected Brushes with ceramic oxide grain (CO) offer good toughness and excellent sharpness For high stock removal values and aggressive brushing behaviour Plastic filament withstands temperatures up to 220 °C Advantages: Long tool life and aggressive brushing effect due to a very high filament density. Extremely smooth operation due to even distribution of the filament material. Highly flexible, enabling optimal adjustment to the workpiece contour and less heat build-up. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. For particularly aggressive machining and for giving the workpiece a high surface quality. ds: dsc: kts: COMPOSITE FLE x round brush RBUP Ø 250 x 13 x 50.8 mm ker. filament wire-Ø 1.10 mm grit 120 stat. kpn: 25013/50,8 CO 120 1,10 FLEX kpn_dash: kpn_clear: 25013508CO120110FLEX bkpn: PFERD 25013/50,8 CO 120 1,10 FLEX bkpn_clear: PFERD 25013508CO120110FLEX c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 79184139 sr_ns: PFERD79184139
r: 03180421 p: 379.85 pid: 69517 b: PFERD q: 0 st: lt: 8 ean: 4007220807156 sr: PFERD 43506722 sr_no_br: 43506722 sr_no_br_cl: 43506722 sr_cl: PFERD43506722 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 250 mm Connection type (machine) Bore Material (brush filament) Stainless steel Wire thickness 0,5 mm Twisted No Thickness 60 mm Max. no-load speed 3600 rpm Connection size (machine) 50,8 mm n: PFERD 25060/50,8 INOX 0,50 deburring brush unturned RBU Ø 250 x 60 x 50.8 mm arbor hole stainless steel wire-Ø 0.50 mm stationary - 43506722 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD Deburring brush crimped RBU dia. 250x60x50.8 mm hole stainless steel wire dia. 0.50 mm stationary Characteristics Particularly suitable for deburring pipes, cut edges and small parts on stationary machines In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: Individual check for imbalance guarantees smooth running. Maximum tool life thanks to high filament density. Very good corrosion resistance. Creates fine surfaces. ds: dsc: kts: deburring brush unturned RBU Ø 250 x 60 x 50.8 mm arbor hole stainless steel wire-Ø 0.50 mm stationary kpn: 25060/50,8 INOX 0,50 kpn_dash: kpn_clear: 25060508INOX050 bkpn: PFERD 25060/50,8 INOX 0,50 bkpn_clear: PFERD 25060508INOX050 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43506722 sr_ns: PFERD43506722
r: 08077954 p: 377.46 pid: 37014 b: PFERD q: 0 st: lt: 8 ean: 4007220956595 sr: PFERD 79183727 sr_no_br: 79183727 sr_no_br_cl: 79183727 sr_cl: PFERD79183727 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 200 mm Connection type (machine) Bore Material (brush filament) Silicon carbide Wire thickness 1,14 mm Twisted No Thickness 25 mm Max. no-load speed 3600 rpm Connection size (machine) 50,8 mm n: PFERD 20025/50,8 REC SiC 80 1,14 COMPOSITE round brush RBUP Ø 200 x 25 x 50.8 mm bore SiC filament wire-Ø 1.14 mm grit 80 stat. - 79183727 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD COMPOSITE wheel brush RBUP dia. 200x25x50.8 mm hole SiC filament dia. 1.14 mm grit 80 stationary Characteristics Particularly aggressive brush Its plastic filament makes this product particularly suitable for deburring complicated components such as cylinder heads or gear toothing, as well as for working on surfaces Developed specially for industrial use Composite brushes from PFERD have been specifically developed for industrial, automated use They are suitable for a variety of applications and their variable clamping options mean that they can be used on many different drive systems This offers the advantage that the workpiece can be produced and finished on the same machine As a result, labour-intensive, manual work is reduced and reproducible results are achieved with short cycle times For efficient use, numerous application parameters such as the processing time and feed rate must be coordinated with each other and a suitable brush must be selected Brushes with silicon carbide (SiC) are particularly well suited to deburring work and surface improvement Rectangular filament [REC] is suited to applications that place particular demands on the aggressiveness of the brush The larger cross-section of the filaments means that these are more stiff than round filaments and provide a greater contact area with the workpiece Plastic filament withstands temperatures up to 220 °C Advantages: Long tool life and aggressive brushing effect due to a very high filament density. Extremely smooth operation due to even distribution of the filament material. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. For aggressive work thanks to rectangular filament (REC). ds: dsc: kts: COMPOSITE round brush RBUP Ø 200 x 25 x 50.8 mm bore SiC filament wire-Ø 1.14 mm grit 80 stat. kpn: 20025/50,8 REC SiC 80 1,14 kpn_dash: kpn_clear: 20025508RECSiC80114 bkpn: PFERD 20025/50,8 REC SiC 80 1,14 bkpn_clear: PFERD 20025508RECSiC80114 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 79183727 sr_ns: PFERD79183727
r: 08077955 p: 377.46 pid: 37019 b: PFERD q: 0 st: lt: 8 ean: 4007220039298 sr: PFERD 79183733 sr_no_br: 79183733 sr_no_br_cl: 79183733 sr_cl: PFERD79183733 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 200 mm Connection type (machine) Bore Material (brush filament) Silicon carbide Wire thickness 1,14 mm Twisted No Thickness 25 mm Max. no-load speed 3600 rpm Connection size (machine) 50,8 mm n: PFERD 20025/50,8 REC SiC 80 1,14 FLEX COMPOSITE FLEx round brush RBUP Ø 200x25x50,8mm bore SiC filament wire-Ø 1,14mm grit 80 stat. - 79183733 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD COMPOSITE FLEX wheel brush RBUP dia. 200x25x50.8 mm hole SiC filament dia. 1.14 mm grit 80 stationary Characteristics Particularly flexible brush Its plastic filament makes this product particularly suitable for deburring complicated components such as cylinder heads or gear toothing Developed specially for industrial use Composite brushes from PFERD have been specifically developed for industrial, automated use They are suitable for a variety of applications and their variable clamping options mean that they can be used on many different drive systems This offers the advantage that the workpiece can be produced and finished on the same machine As a result, labour-intensive, manual work is reduced and reproducible results are achieved with short cycle times For efficient use, numerous application parameters such as the processing time and feed rate must be coordinated with each other and a suitable brush must be selected Brushes with silicon carbide (SiC) are particularly well suited to deburring work and surface improvement Rectangular filament [REC] is suited to applications that place particular demands on the aggressiveness of the brush The larger cross-section of the filaments means that these are more stiff than round filaments and provide a greater contact area with the workpiece Plastic filament withstands temperatures up to 220 °C Advantages: Long tool life and aggressive brushing effect due to a very high filament density. Extremely smooth operation due to even distribution of the filament material. Highly flexible, enabling optimal adjustment to the workpiece contour and less heat build-up. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. For aggressive work thanks to rectangular filament (REC). ds: dsc: kts: COMPOSITE FLEx round brush RBUP Ø 200x25x50,8mm bore SiC filament wire-Ø 1,14mm grit 80 stat. kpn: 20025/50,8 REC SiC 80 1,14 FLEX kpn_dash: kpn_clear: 20025508RECSiC80114FLEX bkpn: PFERD 20025/50,8 REC SiC 80 1,14 FLEX bkpn_clear: PFERD 20025508RECSiC80114FLEX c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 79183733 sr_ns: PFERD79183733
r: 08077980 p: 370.69 pid: 37064 b: PFERD q: 0 st: lt: 8 ean: 4007220160053 sr: PFERD 79184150 sr_no_br: 79184150 sr_no_br_cl: 79184150 sr_cl: PFERD79184150 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 300 mm Connection type (machine) Bore Material (brush filament) Silicon carbide Wire thickness 0,55 mm Twisted No Thickness 13 mm Max. no-load speed 1800 rpm Connection size (machine) 50,8 mm n: PFERD 30013/50,8 SiC 320 0,55 FLEX COMPOSITE FLEx round brush RBUP Ø 300x13x50.8 mm bore SiC filament wire-Ø 0.55 mm grit 320 stat. - 79184150 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD COMPOSITE FLEX wheel brush RBUP dia. 300x13x50.8 mm hole SiC filament dia. 0.55 mm grit 320 stationary Characteristics Particularly flexible brush Its plastic filament makes this product particularly suitable for deburring complicated components such as cylinder heads or gear toothing Developed specially for industrial use Composite brushes from PFERD have been specifically developed for industrial, automated use They are suitable for a variety of applications and their variable clamping options mean that they can be used on many different drive systems This offers the advantage that the workpiece can be produced and finished on the same machine As a result, labour-intensive, manual work is reduced and reproducible results are achieved with short cycle times For efficient use, numerous application parameters such as the processing time and feed rate must be coordinated with each other and a suitable brush must be selected Brushes with silicon carbide (SiC) are particularly well suited to deburring work and surface improvement Plastic filament withstands temperatures up to 220 °C Advantages: Long tool life and aggressive brushing effect due to a very high filament density. Extremely smooth operation due to even distribution of the filament material. Highly flexible, enabling optimal adjustment to the workpiece contour and less heat build-up. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. ds: dsc: kts: COMPOSITE FLEx round brush RBUP Ø 300x13x50.8 mm bore SiC filament wire-Ø 0.55 mm grit 320 stat. kpn: 30013/50,8 SiC 320 0,55 FLEX kpn_dash: kpn_clear: 30013508SiC320055FLEX bkpn: PFERD 30013/50,8 SiC 320 0,55 FLEX bkpn_clear: PFERD 30013508SiC320055FLEX c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 79184150 sr_ns: PFERD79184150
r: 03180426 p: 356.45 pid: 69732 b: PFERD q: 0 st: lt: 8 ean: 4007220807095 sr: PFERD 43506811 sr_no_br: 43506811 sr_no_br_cl: 43506811 sr_cl: PFERD43506811 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 250 mm Connection type (machine) Bore Material (brush filament) Steel wire Wire thickness 0,35 mm Twisted No Thickness 100 mm Max. no-load speed 3600 rpm Connection size (machine) 50,8 mm n: PFERD 250100/50,8 ST 0,35 deburring brush unturned RBU Ø 250 x 100 x 50.8 mm bore steel wire-Ø 0.35 mm stationary - 43506811 cn: DISC BRUSH cn2: DISC BRUSH cn_clear: DISCBRUSH d: Product description PFERD Deburring brush crimped RBU dia. 250x100x50.8 mm hole steel wire dia. 0.35 mm stationary Characteristics Particularly suitable for deburring pipes, cut edges and small parts on stationary machines Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Advantages: Individual check for imbalance guarantees smooth running. Maximum tool life thanks to high filament density. Long tool life through use of PFERD special wire. Creates fine surfaces. ds: dsc: kts: deburring brush unturned RBU Ø 250 x 100 x 50.8 mm bore steel wire-Ø 0.35 mm stationary kpn: 250100/50,8 ST 0,35 kpn_dash: kpn_clear: 250100508ST035 bkpn: PFERD 250100/50,8 ST 0,35 bkpn_clear: PFERD 250100508ST035 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Disc brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd disc brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Disc brush sr_no_br_cl_ns: 43506811 sr_ns: PFERD43506811
