Product description
- PFERD COMBIDISC aluminium oxide abrasive disc CDR dia. 50mm A180 for general use
Characteristics
- For general coarse to fine grinding applications in industry and professional trades
- The CDR clamping system has a threaded connection with male thread (plastic) on the tool side
- Also suitable for the following commonly used systems: Roloc, Lockit, Speed Lok TR, Power Lock Type III, Fastlock-System B, Roll-On
Advantages:
- High economic efficiency as tool can be changed quickly.
- Very comfortable due to ease of use and low-vibration working.
- No disruptions in use due to adhesion, slipping or coming loose.
Key features according to our expert
-
(Disc) diameter: 50 mm
-
(Disc) attachment: CDR system
-
Bore size: Not applicable
-
Perforated: No
-
For material: Steel; Stainless steel; Non-ferrous metal
-
Grit size: 180
Specifications / All features
-
Brand:
PFERD
-
08078803
-
EAN:
4007220596555
-
Supplier number:
PFERD 42770518
- (disc) diameter
- 50 mm
- (disc) attachment
- CDR system
- Bore size
- Not applicable
- Perforated
- No
- For material
- Steel; Stainless steel; Non-ferrous metal
- Grit size
- 180
- Processing tasks 1
- Fine-tuning step by step
- Workable materials 1
- Brass
- Processing tasks
- Deburring
- Processing tasks 3
- Roughening
- Workable materials 12
- Titanium
- Workable materials 3
- Cast steel
- Processing tasks 5
- Machining of surfaces
- ø outside metric
- 50
- Workable materials 9
- Steel grades with hardness > 54 HRC
- Workable materials 7
- Hardened, heat-treated steels above 1,200 N/mm² (< 38 HRC)
- Workable materials 10
- Steel up to 1,200 N/mm² (< 38 HRC)
- Rpm, opt., to
- 13000
- Rpm, opt., of
- 8000
- Workable materials 5
- Fibre-reinforced duroplastics (GRP, CFC)
- Workable materials 13
- Titanium alloys
- Workable materials 4
- Copper
- Workable materials 6
- Grey/lamellar/nodular cast iron (GG/GJL, GGG/GJS)
- Workable materials
- Annealed cast iron
- Workable materials 2
- Bronze
- Workable materials 8
- Stainless steel (INOX)
- Clamping system
- System CDR
- Processing tasks 2
- Levelling
- Processing tasks 6
- welding
- Workable materials 11
- Thermoplastics
- Processing tasks 4
- Sharps
- Processing tasks 7
- Edge processing
- Abrasive
- Corundum A
