Product description
- PFERD Tungsten carbide high-performance burr set STEEL 1812 5-piece dia. 12 mm shank dia. 6 mm for steel
Characteristics
- Set 1812 STEEL contains five tungsten carbide burrs for processing steel and cast steel in the most common shapes and dimensions
- The sturdy plastic box protects the tools from dirt and damage
- The burrs are secured at the shanks, facilitating the selection and withdrawal of the tools
- Five further slots are available for other burrs
Advantages:
- Up to 50 % higher stock removal rate when used on steel and cast steel in comparison to conventional cross-cut burrs.
- Tangibly more aggressive, large chips and very good chip removal through the innovative tooth geometry.
- Workpieces are protected through significantly lower thermal load.
- The highly accurate concentricity enables impactfree working without creating chatter marks and the drive is subject to less wear.