What is Loctite PC 7227 used for?

This 2-part epoxy coating protects metal components like pump housings, pipes, and valves against wear, abrasion, corrosion, and chemicals.

How do you apply this ceramic coating?

After thoroughly mixing the two components, apply the liquid coating using a brush onto a clean, roughened surface.

How many coats are recommended?

A minimum of 2 coats is recommended to prevent pinholes and ensure maximum surface protection.

What is the maximum service temperature?

Loctite PC 7227 resists dry service temperatures up to 93 °C.

Can this product be used as a topcoat?

Yes, it works as a smooth, low-friction topcoat over Loctite wearing compounds for rebuild and protection applications.

LOCTITE 7227 2K surface coating grey in bucket (1 kg) - 2015123

Name: LOCTITE 7227 2K surface coating grey in bucket (1 kg) - 2015123
Brand: LOCTITE
SKU: 11010362
Price: 191.95 EUR
Availability: PreOrder

Supplier number: LOCTITE 2015123 | EAN 5010266321523

Recommended Retail Price €242.71

191.95 tax incl.

€158.64 excl. VAT (incl. all environmental contributions)

On order: delivered from 28/11/2026

Ordered before 20:00 - delivered as of 28/11/2026
Free shipping
Delivery by DHL

✆ Talk to a specialist

Heavy-duty ceramic protection for equipment

Practical benefits

Superior resistance against erosion: The ceramic-reinforced Loctite epoxy shields pumps, valves, and heat exchangers against abrasive wear, cavitation damage, and chemical corrosion.
Smooth low-friction surface finish: You enhance fluid-flow efficiency across machinery thanks to the self-levelling high-gloss layer that minimizes turbulence and operational drag.
Easy brushable compound application: You apply the 2K formulation smoothly with a standard brush to rebuild and seal worn metal components reliably.

In a nutshell

The right choise for

With the Loctite pc 7227 2-part ceramic surface coating, you protect heavy-duty metal components against abrasive wear, cavitation, and chemical corrosion. This brushable, liquid ceramic-reinforced epoxy applies smoothly onto pump housings, pipes, valves, and storage tanks. Its self-levelling, low-friction finish significantly reduces turbulence and hydrodynamic drag, directly boosting the fluid-flow efficiency of your pumping equipment. It also serves as a protective topcoat over rougher Loctite wearing compounds. This allows you to rebuild and seal worn industrial machinery reliably without the need for hot work or welding.

Product information FAQ

€191.95

tax incl.

Key features according to our expert

Weight: 1 kg
ADR packing group: II; III
ADR class: 8; 9
UN number: UN1760; UN3082
Principal hazard property: GHS06 Acute toxicity (fatal)
P-statements: P201; P261; P273; P280; P303 + P361 + P353; P304 + P340; P305 + P351 + P338; P308 + P313; P333 + P313; P302 + P352; P337 + P313
H-statements: H302; H314; H317; H318; H331; H360F; H373; H410; H315; H319; H411
Hazard class: GHS05 Corrosive; GHS06 Acute toxicity (fatal); GHS07 Harmful or irritant; GHS08 Health hazard; GHS09 Hazardous to the environment
Physical state: Liquid
Flash point: 100 °C

Product description:

LOCTITE PC 7227 is a 2-part, grey, ceramic and silicone-carbide filled, self-levelling, brushable, epoxy-based, ultra-smooth surface coating that creates a high gloss, low friction surface.
Primarily it protects against fine particle abrasion and corrosion in service temperatures from -30 to +95°C.
It also works well as a top coat over LOCTITE wearing compounds for applications requiring surface rebuilding and lasting protection.

Precautionary statements

P201: Obtain special instructions before use.
P261: Avoid breathing dust/fume/gas/mist/vapours/spray.
P273: Avoid release to the environment.
P280: Wear protective gloves/protective clothing/eye protection/face protection.
P303 + P361 + P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water (or shower).
P304 + P340: IF INHALED: Remove person to fresh air and keep comfortable for breathing.
P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P313: IF exposed or concerned: Get medical advice/attention.
P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.
P302 + P352: IF ON SKIN: Wash with plenty of water/…
P337 + P313: If eye irritation persists: Get medical advice/attention.

Hazard statements

H302: Harmful if swallowed.
H314: Causes severe skin burns and eye damage.
H317: May cause an allergic skin reaction.
H318: Causes serious eye damage.
H331: Toxic if inhaled.
H360F: May damage fertility.
H373: May cause damage to organs through prolonged or repeated exposure.
H410: Very toxic to aquatic life with long lasting effects.
H315: Causes skin irritation.
H319: Causes serious eye irritation.
H411: Toxic to aquatic life with long lasting effects.

All Features

Weight: 1 kg
Adr packing group: II; III
Adr class: 8; 9
Un number: UN1760; UN3082
Principal hazard property: GHS06 Acute toxicity (fatal)
P-statements: P201; P261; P273; P280; P303 + P361 + P353; P304 + P340; P305 + P351 + P338; P308 + P313; P333 + P313; P302 + P352; P337 + P313
H-statements: H302; H314; H317; H318; H331; H360F; H373; H410; H315; H319; H411
Hazard class: GHS05 Corrosive; GHS06 Acute toxicity (fatal); GHS07 Harmful or irritant; GHS08 Health hazard; GHS09 Hazardous to the environment
Physical state: Liquid
Flash point: 100 °C

Brand LOCTITE
11010362
EAN 5010266321523
Supplier number LOCTITE 2015123

Frequently asked questions about this product

Answered by specialists

What is Loctite PC 7227 used for?: This 2-part epoxy coating protects metal components like pump housings, pipes, and valves against wear, abrasion, corrosion, and chemicals.
How do you apply this ceramic coating?: After thoroughly mixing the two components, apply the liquid coating using a brush onto a clean, roughened surface.
How many coats are recommended?: A minimum of 2 coats is recommended to prevent pinholes and ensure maximum surface protection.
What is the maximum service temperature?: Loctite PC 7227 resists dry service temperatures up to 93 °C.
Can this product be used as a topcoat?: Yes, it works as a smooth, low-friction topcoat over Loctite wearing compounds for rebuild and protection applications.