r: 03176952 p: 15.537 pid: 31961 b: WERA q: 0 st: lt: 15 ean: 4013288213037 sr: WERA 05020217001 sr_no_br: 05020217001 sr_no_br_cl: 05020217001 sr_cl: WERA05020217001 sr_dash: sold: 31.074 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 11/16" Length 210 mm Non-sparking No Product Range Wera Joker n: WERA 6003 Joker Imperial ring spanner inch (11/16" x 210 mm) - 05020217001 cn: COMBINATION SPANNER cn2: COMBINATION SPANNER cn_clear: COMBINATIONSPANNER d: Product description As installation spaces become increasingly confined, tools are necessary that enable users to work successfully even in such situations. Narrow spaces require additional placement points of the tool. Can spanners be modified so that the placement possibilities of the tool increase? The combination of the 7.5° offset open end and the double hexagon geometry doubles the placement points. A repeated 180° turn of the wrench around the longitudinal axis during screwdriving provides four placement possibilities, and bolts or screw heads can be engaged every 15°. The Joker 6003 with its smart open end geometry significantly expands the range of uses in confined spaces. The Joker 6003 will automatically find the respective placement point after every turn. The slim yet robust ring side is tilted by 15° to the tool axis. The high-quality surface treatment achieves a high and long-lasting corrosion protection. With tool finder Take it easy: colour coding by size. Especially suitable for tight spaces The special open end geometry expands the placement possibilities of the tool The low return angle in the open end "takes" the screw every 15° Slim ring side with 15° crank With Take it easy tool finder: colour coding by size Application Hexagon screw heads and bolts Design Combination wrench; open side offset by 7.5°, ring side pivoted by 15°; with Take it easy tool finder: colour coding by size Features and benefits The Joker 6003 ring spanner with its special open end geometry - open end offset by 7.5° and the double hexagon profile - doubles the placement possibilities when repeatedly turning the wrench 180° around the longitudinal axis. Bolts and screw heads can be "accessed" every 15°. The Joker 6003 will automatically find the respective placement point after every turn. Thanks to the open end side offset by 7.5°, double hexagon geometry and an adjusted application method (placement - screwdriving - turning - replacement - screwdriving - turning, etc), even screwdriving challenges allowing a return angle of less than 30° can be solved. The double hexagon geometry on the open end and ring sides secures the positive connection with the screw head or bolt and reduces the risk of slipping. The ring side is tilted at 15° to the tool axis to prevent injury. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6003 Joker Combination wrench, Imperial, 11/16" x 210 mm kts: ring spanner inch (11/16" x 210 mm) kpn: 6003 Joker Imperial kpn_dash: kpn_clear: 6003JokerImperial bkpn: WERA 6003 Joker Imperial bkpn_clear: WERA 6003JokerImperial c_path: Home / Tools / Hand tools / Keys / Keys / Combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020217001 sr_ns: WERA05020217001
r: 08102459 p: 15.537 pid: 158448 b: GEDORE RED q: 0 st: lt: 8 ean: 4060833010061 sr: GEDORE RED 3301006 sr_no_br: 3301006 sr_no_br_cl: 3301006 sr_cl: GEDORERED3301006 sr_dash: sold: 31.074 p_range: none type: standard act: 1 avo: 1 av: Width across flats 17 mm Overall length 225 mm n: GEDORE RED R07201170 combination spanner 17 mm - 3301006 cn: RATCHET COMBINATION SPANNER cn2: RATCHET COMBINATION SPANNER cn_clear: RATCHETCOMBINATIONSPANNER d: Product description Holding function in the ratchet head for holding and safely guiding nuts, screws and bolts According to ISO 21982 15° tilted ring ratchet head, reversible for clockwise and anticlockwise rotation Ratchet mechanism with 72 teeth Jaws set to 15° Matt chrome-plated surface Chrome-vanadium steel ds: dsc: kts: combination spanner 17 mm kpn: R07201170 kpn_dash: kpn_clear: R07201170 bkpn: GEDORE RED R07201170 bkpn_clear: GEDORE RED R07201170 c_path: Home / Tools / Hand tools / Keys / Keys / Ratchet combination spanner | Home / Our brands / Gedore red / Gedore red tools / Gedore red hand tools / Gedore red keys / Gedore red keys / Gedore red ratchet combination spanner sr_no_br_cl_ns: 3301006 sr_ns: GEDORERED3301006
r: 03057695 p: 7.768 pid: 33692 b: WERA q: 0 st: lt: 10 ean: 4013288207968 sr: WERA 05023347001 sr_no_br: 05023347001 sr_no_br_cl: 05023347001 sr_cl: WERA05023347001 sr_dash: sold: 31.072 p_range: KLIUM_PRODUCT_RANGE_306 type: standard act: 1 avo: 1 av: Width across flats 6 mm With ball head No With handle Yes Handle type T-handle VDE approved No With safety colour code 1000V No Non-sparking No Surface treatment Chrome plated Blade length 150 mm Short arm length 20 mm Overall length 150 mm Product Range Wera Hex-Plus n: WERA 454 HF T-handle hex screwdriver Hex-Plus with holding function, 6 x 150 mm - 05023347001 cn: HEX KEY cn2: HEX KEY cn_clear: HEXKEY d: Product description T-handle screwdriver: The ideal handle shape allows the transmission of particularly high tightening and loosening moments. The ergonomic shape of the handle fills the ball of the hand well, the fingers lie securely in the softly rounded recessed grips. The whole hand comes into contact with the handle and friction losses between hand and handle are avoided. With holding function to hold the hexagonal socket screw securely on the tool. Special surface treatment for high corrosion protection and optimal fitting accuracy in the screw. T-handle screwdriver for the transmission of particularly high tightening and loosening torque Ergonomic 2-component handle with finger handle recesses and pleasant surface feel for very high power transmission and fatigue-free working With additional short arm for the transmission of extremely high torques due to the leverage of the long arm With holding function (HF) on the long arm to securely hold the screw on the tool Take it easy tool finder: colour coding according to profile and size Application Hexagon socket screws Blade Hexagon Design With long and short arm, Hex-Plus, bevelled, matte chrome-plated, with holding function for hexagon socket screws on the long arm Handle T-shape, 2 components, with hole for hanging. With Take it easy tool finder: Colour coding by profiles (blue = hexagon socket) and size stamping. Features and benefits The ergonomically shaped 2-component T-handle with finger recesses and pleasant surface facilitates very high power transmission and fatigue-free working. A spring loaded ball ensures the hexagon socket screw to be clamped on the tool tip. Especially helpful in hard to reach areas where you can not use your other hand to hold the screw. The additional short arm, which emerges laterally from the handle, allows the transmission of extremely high torques by using the long arm as a lever. By using the blade as an extension of your lower arm you can transfer particularly high torque. Due to the special surface treatment, the blades receive a high level of corrosion protection. The optimum fitting accuracy of the screw is also guaranteed. Hexagon socket screws are a problem, because the contact surfaces that transfer the force of the tool to the screw are very narrow. The consequence: the head of the screw can be damaged, usually rounding out the recess. Hex-Plus tools have larger contact surfaces to prevent this, driving from the flats of the recess, rather than the corners. Good to know: Hex-Plus tools fit into every standard hexagon socket screw! Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. ds: dsc: Scope of delivery 454 HF T-handle hexagon screwdriver Hex-Plus with holding function, 6 x 150 mm kts: T-handle hex screwdriver Hex-Plus with holding function, 6 x 150 mm kpn: 454 HF kpn_dash: kpn_clear: 454HF bkpn: WERA 454 HF bkpn_clear: WERA 454HF c_path: Home / Tools / Hand tools / Keys / Keys / Hex key | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera hex key | Home / Our brands / Wera / Wera Ranges / Wera hex-plus sr_no_br_cl_ns: 05023347001 sr_ns: WERA05023347001
r: 08131753 p: 30.743 pid: 173546 b: WERA q: 3 st: 1 lt: 1 ean: 4013288233356 sr: WERA 05020353001 sr_no_br: 05020353001 sr_no_br_cl: 05020353001 sr_cl: WERA05020353001 sr_dash: sold: 30.743 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 17 mm Overall length 304,5 mm Product Range Wera Joker n: WERA 6007 Joker Adapter ring spanner SB, long design, 17 x 304.5 mm - 05020353001 cn: RATCHET COMBINATION SPANNER cn2: RATCHET COMBINATION SPANNER cn_clear: RATCHETCOMBINATIONSPANNER d: Product description Unique combination of jaw and ring ratchet mechanism in a long design. For hexagon screw heads and bolts. The long lever allows for higher power transmission. The long design also improves accessibility at low-lying couplings. With holding function enabled by a metal plate in the mouth, which reduces the risk of losing screws and sockets. With its extra hard teeth, the exchangeable metal plate in the mouth secures screws and sockets and reduces the risk of slipping. The integrated end stop can prevent the screw head from slipping down and allows application of high torques. The double hexagon geometry ensures a positive connection with the screw or bolt and thus reduces the risk of slipping. A return angle of only 30° at the jaw end avoids time-consuming rotating of the tool whilst screwdriving. Ratchet mechanism at the ring side with exceptionally high fine toothing of 80 teeth for flexibility even in confined spaces. The specially engineered geometry allows high torque transmission and high bending stiffness. Made of high-performance chromium molybdenum steel with nickel-chromium coating for high corrosion protection. With Take it easy tool finder: colour coding by size and extra laser-engraved size indication. Brilliant combination of jaw end and ratchet mechanism at the ring end in a long design Long lever allows for higher power transmission Better accessibility at low-lying couplings Limit stop prevents any slipping With practical holding function by a metal plate in the mouth Application Hexagon screw heads and bolts Design Ring ratchet spanner, long design Features and benefits Joker 6007 Ratcheting combination wrench. Size matters. The long design of the spanner improves accessibility at low-lying couplings. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. Thanks to its end stop, the Joker lowers the risk of the screw head slipping down. In addition, by reducing the risk of slipping, much more force can be applied when screwdriving. The Joker's clever double-hex geometry delivers a very positive connection with nuts or bolts - it's a perfect fit. Serated teeth on the hardened metal plate provide grip in the Joker's open end literally bite themselves into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque. The double hexagon geometry of the jaw end reduces the return angle of the Joker 6007 to 30°. The Joker 6007 has a straight jaw - awkward turning and repositioning is a thing of the past. The ratcheting feature at the ring end boasts an exceptional, fine tooth mechanism - 80 teeth in all - which provides greater flexibility, even in very confined workingspaces. Take it easy tool finder with colour coding by size and extra laser-engraved size indication - for quick and easy identification of the required tool. ds: dsc: Scope of delivery 6007 Joker SB Ring ratchet spanner, long design, 17 x 304.5 mm kts: Adapter ring spanner SB, long design, 17 x 304.5 mm kpn: 6007 Joker kpn_dash: kpn_clear: 6007Joker bkpn: WERA 6007 Joker bkpn_clear: WERA 6007Joker c_path: Home / Tools / Hand tools / Keys / Keys / Ratchet combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera ratchet combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020353001 sr_ns: WERA05020353001
r: 02828980 p: 30.413 pid: 42283 b: WERA q: 0 st: lt: 8 ean: 4013288184818 sr: WERA 05020078001 sr_no_br: 05020078001 sr_no_br_cl: 05020078001 sr_cl: WERA05020078001 sr_dash: sold: 30.413 p_range: KLIUM_PRODUCT_RANGE_307 type: standard act: 1 avo: 1 av: Width across flats 1/2" Overall length 171 mm Product Range Wera Joker n: WERA 6001 Joker Switch Imperial socket and ratchet spanner, switchable, inch, 1/2" x 171 mm - 05020078001 cn: RATCHET COMBINATION SPANNER cn2: RATCHET COMBINATION SPANNER cn_clear: RATCHETCOMBINATIONSPANNER d: Product description Joker ratcheting combination wrenches with angled ratchet head and switch lever. The metal plate in the jaw provides for the holding function which reduces the risk of losing nuts and bolts. The integrated limit stop can prevent any slipping from the bolt head downwards and enables higher torque to be applied. The exchangeable metal plate in the jaw securely holds nuts and bolts with its extra hard teeth and reduces the risk of slipping. The double-hex geometry delivers a very positive connection with nuts or bolts and again provides for a lower risk of any slipping. The low return angle of only 30° at the jaw end avoids any time-consuming flipping of the wrench when fastening. The reversible ratchet mechanism at the ring end with its fine toothing (80 teeth) ensures great flexibility even in confined spaces. Audibly precise ratchet mechanism. Additionally, the robust two-piece locking element provides for an extreme stability. Comes with a 15° tilted ratchet end for secure work even at high torque. The special forged geometry allows for high torque transfer and high flexural rigidity. Manufactured out of high-performance chrome-molybdenum steel with a nickel-chromium coating for high corrosion protection. With Take it easy tool finder: colour coding according to size. Practical holding function thanks to the metal plate in the jaw Limit stop prevents any slipping Very fine toothing and robust locking element Ratchet end tilted by 15° With Take it easy tool finder: colour coding by size Application Hexagonal nuts or bolts Design Ratcheting combination wrench, switch lever for convenient change of direction; ring end tilted at 15° from the handle Features and benefits With the Joker you can now loosen, lock and tighten screws and bolts in situations where conventional tools fail. That's why the Joker is smarter. Plus, it cuts a damn good figure in every position. The direction of the fine-tooth ratchet mechanism can easily be changed via the smooth switch lever. The ratchet end is tilted at 15° to the tool axis, making application of the tool in confined spaces much easier. The Joker's holding function means that nuts and bolts can be held in the jaw and easily positioned where they are needed. Fastening on to the thread can then be done quickly and safely, thanks to the innovative special stop-plate which holds the fastener. No more time-wasting searches for dropped nuts and bolts! After applying and positioning the nut or bolt, fastening can begin immediately - no additional tools required. Constant re-positioning of the wrench? Difficulty holding fasteners in confined spaces? Easing off to avoid any risks of injury or fastener damage? That was yesterday. Today, the Joker prevents slipping off of the fastener head with its integrated limit-stop - no longer is the thumb needed to act as a depth stop. This makes applications much easier and allows significantly more force to be applied during fastening jobs. The Joker's clever double-hex geometry delivers a very positive connection with nuts or bolts - it's a perfect fit. Serated teeth on the hardened metal plate provide grip in the Joker's open end literally bite themselves into the bolt, with its extremely hard tips. Both features combine to prevent slipping, even at higher torque. The ratcheting feature at the ring end boasts an exceptional, fine tooth mechanism - 80 teeth in all - which provides greater flexibility, even in very confined workingspaces. Take it easy tool finder system - with profile and size colour-coding for quick and easy tool selection. Colour-coded system for hexagon drive screws (L-Keys, Zyklop bit sockets), external hex drive screws and nuts (Joker wrenches, Zyklop sockets and Zyklop bit sockets with holding function), and TORX® drive screws (L-Keys, Zyklop bit sockets). ds: dsc: Scope of delivery 6001 Joker Switch Ratcheting combination wrench, with switch lever, Imperial, 1/2" x 171 mm kts: socket and ratchet spanner, switchable, inch, 1/2" x 171 mm kpn: 6001 Joker Switch Imperial kpn_dash: kpn_clear: 6001JokerSwitchImperial bkpn: WERA 6001 Joker Switch Imperial bkpn_clear: WERA 6001JokerSwitchImperial c_path: Home / Tools / Hand tools / Keys / Keys / Ratchet combination spanner | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera keys / Wera keys / Wera ratchet combination spanner | Home / Our brands / Wera / Wera Ranges / Wera joker sr_no_br_cl_ns: 05020078001 sr_ns: WERA05020078001
r: 03169562 p: 15.206 pid: 85771 b: FACOM q: 0 st: lt: 10 ean: 3662424027659 sr: FACOM 440.10SLS sr_no_br: 440.10SLS sr_no_br_cl: 44010SLS sr_cl: FACOM44010SLS sr_dash: sold: 30.412 p_range: none type: standard act: 1 avo: 1 av: Width across flats 10 mm Non-sparking No Supplier warranty FACOM - 2 years Length 145 mm n: FACOM 440.10SLS ring spanner with SLS attachment 10 mm cn: COMBINATION SPANNER cn2: COMBINATION SPANNER cn_clear: COMBINATIONSPANNER d: Product description 440.SLS - Metric ring spanners Features Tool equipped with a convenient FACOM SLS fixing solution that prevents any risk of accidental drop. The "sliding" cable solution, selected and tested by FACOM, preserves the tool's user ergonomics (8-30 mm spanners). Standard spanner for all normal applications. High-quality mechanical properties combined with small dimensions, keeping in mind aerospace requirements. Ring head: - The design of the angle of the ring (side E) gives a better grip on back-to-back or recessed nuts. - 12-sided ring with OGV profile for powerful torque without damaging the nut. - Ring head bent 15°. Fork head: - Fork curved 15°. - Optimised geometric relationship between fork and handle for greater accessibility. Metric sizes: from 6 to 34 mm. Design: chrome-plated, satin-finished. ds: dsc: kts: ring spanner with SLS attachment 10 mm kpn: 440.10SLS kpn_dash: kpn_clear: 44010SLS bkpn: FACOM 440.10SLS bkpn_clear: FACOM 44010SLS c_path: Home / Tools / Hand tools / Keys / Keys / Combination spanner | Home / Our brands / Facom / Facom tools / Facom hand tools / Facom keys / Facom keys / Facom combination spanner sr_no_br_cl_ns: 44010SLS sr_ns: FACOM440.10SLS
r: 08052839 p: 7.603 pid: 74743 b: BAHCO q: 0 st: lt: 8 ean: 7314150405831 sr: BAHCO SS325-8 sr_no_br: SS325-8 sr_no_br_cl: SS3258 sr_cl: BAHCOSS3258 sr_dash: BAHCO SS325 sold: 30.412 p_range: none type: standard act: 1 avo: 1 av: Width across flats 8 mm With ball head Yes With handle No Handle type VDE approved No With safety colour code 1000V No Non-sparking No Surface treatment None Overall length 142 mm n: BAHCO SS325-8 hexagonal spanner stainless steel ball head long 1/4" 142 mm cn: HEX KEY cn2: HEX KEY cn_clear: HEXKEY d: Product description: AISI 420 stainless steel body Magnetic Hexagon head key, imperial sizes High strength and hardness Can be Autoclave Sterilized at 121ºC Produced according to ISO 2936 Tools with great strength and hardness Excellent corrosion resistance Long arm provides higher torque transmission and accessibility Ball end allows to easily insert the key in the screw head from a range of angles ds: dsc: kts: hexagonal spanner stainless steel ball head long 1/4" 142 mm kpn: SS325-8 kpn_dash: SS325 kpn_clear: SS3258 bkpn: BAHCO SS325-8 bkpn_clear: BAHCO SS3258 c_path: Home / Tools / Hand tools / Keys / Keys / Hex key | Home / Our brands / Bahco / Bahco tools / Bahco hand tools / Bahco keys / Bahco keys / Bahco hex key sr_no_br_cl_ns: SS3258 sr_ns: BAHCOSS325-8
