Product description
- Remedies & prevents malfunctions
- For 2 to 4 times
Washing machines and dishwashers always seem clean at first glance. But they are not that clean. With every wash cycle, crucial (often invisible) parts in your machines become dirty due to deposits formed by limescale, soap, dirt and/or grease lice. These contaminants wear down the parts, causing malfunctions. This not only causes the machine to stop working, but also causes other problems, such as:
- Smelly and/or dirty laundryThe
- washing programme takes longerThe
- machine does not heat up or does not heat up properlyThe
- machine keeps pumping out
- The machine starts smelling musty
The best-known example of a defective component is the heating element. Before it breaks down, it has not been functioning properly for a long time. But more parts are susceptible to fouling. This is why professional washer and dishwasher repair technicians always clean a machine completely after a repair to ensure that another part does not break down due to contamination anytime soon. Now, failure due to soiling can also be prevented by very simply cleaning the washing and dishwashing machine every quarter with this HG product (also used by professional repairers). This prevents filters, floaters, drainpipes and other hard-to-reach parts from fouling and making your machine smell musty. Sealing rubbers remain elastic and water-resistant, preventing leaks and short circuits. Of course, all visible parts will also become shiny clean, making the machine not only like new inside but also look like new again.
Application
Remedies & prevents malfunctions.
Instructions for use
- Maintenance cleaner for dishwashers Make sure the washer or dishwasher is empty and fill the dishwasher's soap container to the top line with cleaner
- Set the programme to the highest possible temperature (65 °C)
- Immediately start the entire programme and let it run without interruption
- The dishwasher is now ready for use again
- Maintenance cleaner for washing machines For washing machines, fill the main detergent compartment or the machine itself with one full bottle of HG maintenance cleaner
- Do not add extra detergent
- Set the programme to the setting for coloured washing (60°C)
- Then switch on the washing machine and let it run fully and without interruption, including spinning
- The washing machine is now ready to use again
