Product description
- Protects against wear and scratches
HG parquet protector gloss is a very easy-to-apply, liquid polymer emulsion that once dry forms a glossy and wafer-thin, but extremely strong protective film. This protects the parquet's finish against wear, scratches and other damage. This protective film also gives an anti-slip effect.
Application
Parquet protector
Instructions for use
- Even with new parquet, the surface must be completely clean, grease- and dust free
- Remove any old wax, polish and polymer layers
- For any necessary treatments: see the HG parquet floor treatment matrix on the side of this bottle
- For good distribution, preferably use a wax dispenser (see the illustration on the front of this bottle)
- If desired, a clean, lint-free (tea) cloth wrapped around a squeegee can also be used
- Pour the liquid undiluted over the floor and, without exerting pressure on the wax dispenser or squeegee, spread it over the floor in the direction of the wood grain
- When the product has dried, after about 60 minutes, a second coat can be applied at right angles to the first coat, if necessary
- Approximately 1 to 2 hours after the last treatment the floor can be walked on normally and is fully cured after 3 days
- Consumption: 40 m2 per litre per coat