HG 136100103 laminate protection film 1000 ml

From 6 piece €14.13

From 12 pieces €12.72 - €16.96 saving

From 18 pieces €12.01 - €38.16 saving

14.13 tax incl.

€11.68 excl. VAT (incl. all environmental contributions)

HG 136100103 laminate protection film 1000 ml

€14.13

On order: delivered from 10/07/2026

each

The minimum purchase order quantity for the product is 6.

Ordered before 20:00 - delivered as of 10/07/2026
Shipping costs €6.99 VAT included | Free shipping for orders over a total amount of 125 euros
Delivery by DHL

Product information

Product description

Gives shine
Protects against wear and tear
Scratches and other damage

HG laminate, vinyl and PVC protector (product 70) is a very easy-to-apply, liquid polymer emulsion that once dry forms a glossy and wafer-thin, but extremely strong protective film. This protects the top layer of the laminate from wear, scratches and other damage. This product also masks dull spots and pre-existing damage and gives an anti-slip effect. 1 litre is good for about 60 m² per coat.

Instructions for use

The surface must be completely clean, grease- and dust-free, even with a new floor.
Remove any old wax and polymer layers
For the necessary treatments: see the HG treatment matrix on the side of this bottle
For good distribution, preferably use a wax dispenser (see the illustration on the front of this bottle)
If desired, a clean, non-fluffy (tea) cloth wrapped around a squeegee can also be used
Pour a small quantity of the liquid undiluted onto the floor and spread it thinly and evenly in one direction, without exerting pressure on the wax dispenser or squeegee
Do not twist or rub!
When the product has dried, after about 60 minutes, a second coat can be applied at right angles to the first coat, if necessary
Approximately 1 to 2 hours after the last treatment, the floor can be walked on normally and is fully cured after 3 days
Consumption: 60 m² per litre per coat

Key features according to our expert