Digital multimeters and clamp meters for electricians
A digital multimeter measures voltage, current and resistance and is the essential diagnostic tool for every electrician, maintenance technician and industrial service engineer. This range includes handheld multimeters for general electrical testing and troubleshooting, True RMS models that deliver accurate readings on non-sinusoidal waveforms generated by variable frequency drives and modern electronics, and clamp meters that measure current without breaking the circuit.
Voltage ratings reach up to 1000 V AC/DC for high-voltage industrial work, with current capacity up to 400 A on clamp models and 10 A on standard banana plug inputs. Compact models fit easily into a tool belt or trouser pocket for quick access during installation work, while advanced versions add features such as non-contact voltage detection, capacitance measurement, temperature probes and built-in data logging for documenting readings over time.
Electrical testers provide fast pass/fail checks for voltage presence up to 600 V without needing to set ranges manually. The range covers over 160 products from Fluke, Beha-Amprobe, Benning, Milwaukee, Stanley, Facom and more, meeting the demands of field electricians, panel builders and industrial maintenance teams alike.
r: 41977635 p: 187 pid: 83279 b: FLUKE q: 9 st: 1 lt: 1 ean: sr: FLUKE 4152628 sr_no_br: 4152628 sr_no_br_cl: 4152628 sr_cl: FLUKE4152628 sr_dash: sold: 102289 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 600 V Measurement temperature No Digital Yes Battery type AAA Low battery message Yes Automatic shut-off Yes With current clamp Yes Diode test No Max. current AC/DC 400 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity No Measurement frequency No Measurement resistance No Current measurement Yes Measurement voltage Yes n: FLUKE 323 True RMS multimeter with current clamp 400A AC - 600V AC/DC - 4152628 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description True-RMS measurements and optimised ergonomics make the 320-series current clamps the best general-purpose tools for troubleshooting by electricians in commercial premises and private homes. The Fluke 323 model is ideally suited for current measurements up to 400 A in tight cable boxes. Robust, reliable and accurate. Key features Slim, ergonomic design Safety specification CAT IV 300 V/CAT III 600 V Hold-button Two-year warranty Carrying case Measuring functions 400 A AC current measurement 600 V AC and DC voltage measurement True-RMS AC voltage and current for accurate measurements on non-linear signals Resistance measurement up to 4 kOhm with loop-through test ds: dsc: Scope of delivery 323 True-RMS current clamp Measurement leads Carrying case User's manual kts: multimeter with current clamp 400A AC - 600V AC/DC kpn: 323 True RMS kpn_dash: kpn_clear: 323TrueRMS bkpn: FLUKE 323 True RMS bkpn_clear: FLUKE 323TrueRMS c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter | Home / Promotions / Promotions / Black friday / Black friday tools / Black friday tools multimeter | Home / Promotions / Promotions / Black friday / Fluke black friday / Fluke black friday tools sr_no_br_cl_ns: 4152628 sr_ns: FLUKE4152628
r: 37960626 p: 226.947 pid: 74244 b: FLUKE q: 24 st: 1 lt: 1 ean: 0095969059503 sr: FLUKE 659612 sr_no_br: 659612 sr_no_br_cl: 659612 sr_cl: FLUKE659612 sr_dash: sold: 87601.542 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 600 V Measurement temperature No Digital Yes Battery size AA Low battery message Yes Automatic shut-off Yes Max. current AC/DC 100 A Diode test No Continuity test Yes Measurement Lo-Z No With current clamp Yes Measurement of noise No Measurement frequency No Measurement resistance No Current measurement Yes Measurement voltage Yes Measurement of electrical capacity No n: FLUKE T5-600 electrical tester up to 600V AC/DC - 100A AC - 659612 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description Electrical tester with OpenJaw current Fluke's T5 electrical testers let you test voltage, continuity and current with one compact tool. When using the T5, you only need to select voltage, resistance or current, and the tester does the rest. Thanks to the OpenJaw current, you can check current up to 100 A without interrupting the circuit. The T5's robust test leads can be neatly stowed away in the back of the tester, making it easy to carry in your instrument bag. The detachable SlimReach test probes have been modified to comply with national standards for electrical testers. Optional accessories can be connected to the test leads, such as clamps and special probes. The optional H5 holster allows you to attach the instrument to your belt. Key features Automatically measures AC and DC voltage with accurate digital resolution Displays resistance up to 1000 ohms Easy and accurate OpenJaw current measurement Dial-through test Compact design with handy probe holder Rugged enough to withstand a 3 m drop The removable SlimReach test probes have been modified to meet national standards for electrical testers Fluke test terminals can be connected to the test leads as an accessory Can stay connected much longer than an electromagnetic tester Automatic shutdown to save battery life The optional holster can be attached to a belt and allows neat storage of the test leads Safety standards All inputs of the T5-600 are protected in accordance with EN61010-1 CAT III 600 V. ds: dsc: Scope of delivery Voltage and current probe with a range of 600 V Removable probes of 4 mm Instruction sheet kts: electrical tester up to 600V AC/DC - 100A AC kpn: T5-600 kpn_dash: T5 kpn_clear: T5600 bkpn: FLUKE T5-600 bkpn_clear: FLUKE T5600 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter | Home / Promotions / Promotions / Black friday / Black friday tools / Black friday tools multimeter | Home / Promotions / Promotions / Black friday / Fluke black friday / Fluke black friday tools sr_no_br_cl_ns: 659612 sr_ns: FLUKE659612
r: 41969709 p: 241.38 pid: 83570 b: FLUKE q: 25 st: 1 lt: 1 ean: 0095969344814 sr: FLUKE 2583583 sr_no_br: 2583583 sr_no_br_cl: 2583583 sr_cl: FLUKE2583583 sr_dash: sold: 75793.32 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 600 V Measurement temperature No Digital Yes Battery size 9V Low battery message Yes Automatic shut-off Yes Max. current AC/DC 10 A Diode test Yes Continuity test Yes Measurement Lo-Z Yes With current clamp No Measurement of noise No Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 10000 µF Max. frequency 100 kHz Max. resistance 40 MOhm Measurement of electrical capacity Yes n: FLUKE 115 RMS compact multimeter up to 600V AC/DC - 10A AC/DC - 2583583 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description Designed by electricians. Manufactured by Fluke. Compact True-RMS meter for field service technicians. The Fluke 115 is the solution for a wide variety of electrical and electronic test applications. Key features Large display with white LED backlight for use in dimly lit environments Resistance and continuity test Min/Max/Average recording of signal fluctuations Safety specification CAT III 600 V Safety standards All inputs are protected in accordance with CE, IEN61010-1 CAT III 600V. UL, CSA, TÜV and VDE certified. ds: dsc: Scope of delivery 115 digital multimeter Protective yellow snap-on case Installed 9 V battery 4 mm silicone measuring lead set User's manual kts: compact multimeter up to 600V AC/DC - 10A AC/DC kpn: 115 RMS kpn_dash: kpn_clear: 115RMS bkpn: FLUKE 115 RMS bkpn_clear: FLUKE 115RMS c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter | Home / Promotions / Promotions / Black friday / Black friday tools / Black friday tools multimeter | Home / Promotions / Promotions / Black friday / Fluke black friday / Fluke black friday tools sr_no_br_cl_ns: 2583583 sr_ns: FLUKE2583583
r: 02293143 p: 326.173 pid: 96505 b: FLUKE q: 24 st: 1 lt: 1 ean: 0095969344852 sr: FLUKE 2583647 sr_no_br: 2583647 sr_no_br_cl: 2583647 sr_cl: FLUKE2583647 sr_dash: sold: 56101.756 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 600 V Measurement temperature No Digital Yes Battery size 9V Low battery message Yes Automatic shut-off Yes Max. current AC/DC 10 A Diode test Yes Continuity test Yes Measurement Lo-Z Yes With current clamp No Measurement of noise No Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 10000 µF Max. frequency 50 kHz Max. resistance 40 MOhm Measurement of electrical capacity Yes n: FLUKE 117 compact RMS multimeter with non-contact voltage detector for electricians up to 600V AC/DC - 10A AC/DC - 2583647 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description Fluke 117 multimeter with non-contact voltage detector for electricians Designed by electricians. Manufactured by Fluke. Compact True-rms meter for commercial applications. The Fluke 117 is the ideal meter for high-demand buildings such as commercial buildings, hospitals and schools. The 117 has a non-contact voltage detection feature for faster work. Key features VoltAlert technology for non-contact voltage detection AutoVolt automatic selection of AC/DC voltage Low input impedance: helps prevent erroneous readings due to phantom voltage Large display with white LED backlight for use in dimly lit environments True-rms for accurate measurements at non-linear loads Measures 20 A (momentary up to 30 seconds, 10 A continuous) Resistance, continuity, frequency and capacitance Provides Min/Max/Average for recording signal fluctuations Compact ergonomic design for one-handed operation. Suitable for the optional magnetic suspension system (ToolPak) for hands-free use Safety specification CAT III 600 V ds: dsc: Scope of delivery 117 multimeter 4 mm silicone test lead set Protective yellow snap-on case User's manual kts: compact RMS multimeter with non-contact voltage detector for electricians up to 600V AC/DC - 10A AC/DC kpn: 117 kpn_dash: kpn_clear: 117 bkpn: FLUKE 117 bkpn_clear: FLUKE 117 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 2583647 sr_ns: FLUKE2583647
r: 37960698 p: 330.966 pid: 72987 b: FLUKE q: 43 st: 1 lt: 1 ean: 0095969095921 sr: FLUKE 1592901 sr_no_br: 1592901 sr_no_br_cl: 1592901 sr_cl: FLUKE1592901 sr_dash: sold: 45342.342 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature No Digital Yes Battery size 9V Low battery message Yes Automatic shut-off Yes With current clamp No Max. current AC/DC 10 A Continuity test Yes Measurement Lo-Z No Diode test Yes Measurement of noise No Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 10000 µF Max. frequency 100 kHz Max. resistance 50 MOhm Measurement of electrical capacity Yes n: FLUKE 175 EGFID Digital RMS multimeter up to 1000V AC/DC - 10A AC/DC - 1592901 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description Fluke 175 digital multimeter True RMS. The new multimeter standard The three models in the new 170 series are the new standard for general purpose multimeters. They set the standard by incorporating aspects such as accuracy, functionality, ease of use, safety and reliability. Key features True RMS voltage and current value measurements Basic accuracy of 0.15% Resolution 6000 counts Digital display with analogue bargraph and backlighting Manual and automatic range setting Display Hold and Auto Hold Frequency and capacitance measurement Resistance measurement, dial-through and diode test Min/Max/Average recording Smoothing for more stable reading of rapidly fluctuating input signals Easy battery replacement without opening the housing Calibration with closed housing via the front panel Ergonomic housing with integrated protective holster EN61010-1 CAT III 1000 V / CAT IV 600 V Measures twice as fast as other multimeters Safety standards All inputs are protected in accordance with EN61010-1 CAT IV 600V/CAT III 1000V. CSA and TÜV certified. ds: dsc: Scope of delivery 9V battery installed Measurement leads Operating instructions kts: Digital RMS multimeter up to 1000V AC/DC - 10A AC/DC kpn: 175 EGFID kpn_dash: kpn_clear: 175EGFID bkpn: FLUKE 175 EGFID bkpn_clear: FLUKE 175EGFID c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 1592901 sr_ns: FLUKE1592901
r: 02060786 p: 164.19 pid: 95603 b: FLUKE q: 4 st: 1 lt: 1 ean: 0095969436298 sr: FLUKE 3088053 sr_no_br: 3088053 sr_no_br_cl: 3088053 sr_cl: FLUKE3088053 sr_dash: sold: 42689.4 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 600 V Measurement temperature No Digital Yes Battery size 9V Low battery message Yes Automatic shut-off Yes With current clamp No Diode test Yes Measurement Lo-Z Yes Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency No Measurement resistance No Current measurement No Measurement voltage Yes Max. electrical capacity 10000 µF n: FLUKE 113 RMS compact digital multimeter with VCHEK - 3088053 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description The Fluke 113 digital multimeter allows users to perform basic meter settings and connection tests quickly and easily. This measuring instrument is extremely user-friendly and has the features you need to solve most electrical problems. The Fluke 113 offers significant improvements over other digital multimeters on the market, including the Fluke model 7-600. Using Fluke's VCHEK LoZ low impedance measurement function, users can make voltage measurements and continuity tests simultaneously. Low-impedance LoZ measurements also block phantom voltages caused by nearby conductors. Keep in mind that low-impedance LoZ measurements cause a low load on a circuit protected by a residual current device, which may cause the residual current device to trip. The Min/Max function allows you to record signal fluctuations. Suitable for diode testing, the Fluke 113 has both automatic and manual range settings. With features such as compliance with the latest safety standards, backlighting and a much larger, easier-to-read display, this measuring instrument is a must-have for any toolbox. Key features VCHEK LoZ low impedance measurement function for simultaneous voltage measurement and continuity testing True RMS for accurate AC measurements with non-linear loads Large backlit display ensures good readability even in poor lighting conditions Register signal fluctuations with the Min/Max function Diode test for testing universal germanium, silicon and power diodes Integrated holster with probe holders for easy storage Automatic and manual range adjustment for additional user functionality Instrument complies with CAT III 600 V and CAT IV 300 V safety categories for increased safety With the optional magnetic TPAK hanging clip, the user has both hands free ds: dsc: Scope of delivery 113 digital multimeter TL75 test leads Protective yellow snap-on sheath Operating manual 9V battery (already installed) kts: compact digital multimeter with VCHEK kpn: 113 RMS kpn_dash: kpn_clear: 113RMS bkpn: FLUKE 113 RMS bkpn_clear: FLUKE 113RMS c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter | Home / Promotions / Promotions / Black friday / Black friday tools / Black friday tools multimeter | Home / Promotions / Promotions / Black friday / Fluke black friday / Fluke black friday tools sr_no_br_cl_ns: 3088053 sr_ns: FLUKE3088053
r: 37960630 p: 267.566 pid: 72981 b: FLUKE q: 8 st: 1 lt: 1 ean: 0095969059466 sr: FLUKE 659570 sr_no_br: 659570 sr_no_br_cl: 659570 sr_cl: FLUKE659570 sr_dash: sold: 31037.656 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature No Digital Yes Battery size AA Low battery message Yes Automatic shut-off Yes With current clamp Yes Max. current AC/DC 100 A Continuity test Yes Measurement Lo-Z No Diode test No Measurement of noise No Measurement of electrical capacity No Measurement voltage Yes Current measurement Yes Measurement resistance No Measurement frequency No n: FLUKE T5-1000 electrical tester up to 1000V AC/DC - 100A AC - 659570 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: Electrical tester with OpenJaw current Fluke's T5 electrical testers let you test voltage, continuity and current with one compact tool. When using the T5, you only need to select voltage, resistance or current, and the tester does the rest. Thanks to the OpenJaw current, you can check current up to 100 A without interrupting the circuit. The T5's robust test leads can be neatly stowed away in the back of the tester, making it easy to carry in your instrument bag. The detachable SlimReach test probes have been modified to comply with national standards for electrical testers. Optional accessories can be connected to the test leads, such as clamps and special probes. The optional H5 holster allows you to attach the instrument to your belt. Key features Automatically measures AC and DC voltage with accurate digital resolution Displays resistance up to 1000 ohms Easy and accurate OpenJaw current measurement Dial-through test Compact design with handy probe holder Robust enough to withstand a 3 m drop The removable SlimReach test probes have been modified to comply with national standards for electrical testers Fluke test terminals can be connected to the test leads as an accessory Can stay connected much longer than an electromagnetic tester Automatic shutdown to save battery life The optional holster can be attached to a belt and allows neat storage of the test leads Safety standards All inputs of the T5-1000 are protected in accordance with EN61010-1 1000 V CAT III. ds: dsc: Scope of delivery Voltage, continuity and current tester with a range of 1000 V Removable probes of 4 mm Instruction sheet kts: electrical tester up to 1000V AC/DC - 100A AC kpn: T5-1000 kpn_dash: T5 kpn_clear: T51000 bkpn: FLUKE T5-1000 bkpn_clear: FLUKE T51000 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter | Home / Promotions / Promotions / Black friday / Black friday tools / Black friday tools multimeter | Home / Promotions / Promotions / Black friday / Fluke black friday / Fluke black friday tools sr_no_br_cl_ns: 659570 sr_ns: FLUKE659570
r: 41972786 p: 483.198 pid: 83271 b: FLUKE q: 14 st: 1 lt: 1 ean: 0095969095860 sr: FLUKE 1592842 sr_no_br: 1592842 sr_no_br_cl: 1592842 sr_cl: FLUKE1592842 sr_dash: sold: 29958.276 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature Yes Digital Yes Battery size 9V Low battery message Yes Automatic shut-off Yes With current clamp No Max. current AC/DC 10 A Continuity test Yes Measurement Lo-Z No Diode test Yes Measurement of noise No Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 10000 µF Max. frequency 100 kHz Max. resistance 50 MOhm Measurement of electrical capacity Yes n: FLUKE 179 EGFID Digital RMS multimeter up to 1000V AC/DC - 10A AC/DC - 400°C - 1592842 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description Fluke 179 digital multimeter True RMS. The new multimeter standard The three models in the new 170 series are the new standard for general purpose multimeters. They set the standard by incorporating aspects such as accuracy, functionality, ease of use, safety and reliability. Key features True RMS voltage and current value measurements Basic accuracy of 0.09% Resolution 6000 counts Digital display with analogue bargraph and backlighting Manual and automatic range setting Display Hold and Auto Hold Frequency and capacitance measurement Resistance measurement, continuity and diode test Temperature measurements Min/Max/Average recording Smoothing for more stable reading of rapidly fluctuating input signals Easy battery replacement without opening the housing Calibration with closed housing via the front panel Ergonomic housing with integrated protective holster EN61010-1 CAT III 1000 V / CAT IV 600 V Measures twice as fast as other multimeters Safety standards All inputs are protected in accordance with EN61010-1 CAT IV 600V/CAT III 1000V. CSA and TÜV certified. ds: dsc: Scope of delivery 80BK temperature probe 9V battery installed Test leads Operating instructions kts: Digital RMS multimeter up to 1000V AC/DC - 10A AC/DC - 400°C kpn: 179 EGFID kpn_dash: kpn_clear: 179EGFID bkpn: FLUKE 179 EGFID bkpn_clear: FLUKE 179EGFID c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 1592842 sr_ns: FLUKE1592842
r: 02951005 p: 221.876 pid: 73242 b: FLUKE q: 3 st: 1 lt: 1 ean: 0095969344791 sr: FLUKE 2583552 sr_no_br: 2583552 sr_no_br_cl: 2583552 sr_cl: FLUKE2583552 sr_dash: sold: 28178.252 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 600 V Measurement temperature No Digital Yes Battery size 9V Low battery message Yes Automatic shut-off Yes Diode test No Continuity test Yes Measurement Lo-Z Yes With current clamp No Measurement of noise No Measurement frequency No Measurement resistance Yes Current measurement No Measurement voltage Yes Max. resistance 40 MOhm Measurement of electrical capacity No n: FLUKE 114 Compact electrical RMS multimeter up to 600V AC/DC - 2583552 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description Designed by electricians - Manufactured by Fluke. Compact True-rms meter for troubleshooting electrical installations. The Fluke 114 is the tool of choice for troubleshooting 'go/no-go' testing. The meter has a special function to prevent erroneous readings due to phantom voltage. Key features AutoVolt: automatic selection of AC/DC voltage Large display with white LED backlight for use in dimly lit environments Resistance and continuity test Min/Max/Average recording of signal fluctuations Safety specification CAT III 600 V Safety standards All inputs are protected in accordance with CE, IEN61010-1 CAT III 600V. ds: dsc: Scope of delivery 114 digital multimeter Protective yellow snap-on case Installed 9 V battery 1 pair of measuring leads User's manual kts: Compact electrical RMS multimeter up to 600V AC/DC kpn: 114 kpn_dash: kpn_clear: 114 bkpn: FLUKE 114 bkpn_clear: FLUKE 114 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 2583552 sr_ns: FLUKE2583552
r: 02250665 p: 417.029 pid: 94548 b: FLUKE q: 3 st: 1 lt: 1 ean: 0095969559874 sr: FLUKE 3790607 sr_no_br: 3790607 sr_no_br_cl: 3790607 sr_cl: FLUKE3790607 sr_dash: sold: 27940.943 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 600 V Measurement temperature No Digital Yes Battery size AA Low battery message Yes Automatic shut-off Yes With current clamp Yes Diode test No Max. current AC/DC 200 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity No Measurement frequency No Measurement resistance No Current measurement Yes Measurement voltage Yes n: FLUKE 365 True-RMS-AC current clamp with removable jaw - 3790607 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: The Fluke 365 is a rugged meter perfect for hard-to-reach wires. The 365's thin and small jaw is detachable and has a flexible test lead, making it easier than ever to reach hard-to-reach wires and read the display. Key features 200 A AC and DC current measurement with detachable jaw 600 V AC and DC voltage measurement The removable jaw allows easier access to wires and easier reading of the display Built-in torch provides easy illumination and identification of wires CAT III 600 V Compact design allows the clamp to sit comfortably in the hand and to be used when wearing protective equipment. Advanced signal processing for use in environments where electrical disturbances occur, resulting in stable measured values. The large, easy-to-read backlit display automatically sets the correct measurement range, so you do not need to change the position of the range switch while taking measurements. Three-year warranty Carrying case Safety standards EN/IEC 61010-1:2001; 600 V CAT III ds: dsc: Scope of delivery True-RMS-AC current clamp Laminated instruction card Safety data sheet Carrying case TL75 test leads Magnetic hanging strap Two AA alkaline batteries kts: True-RMS-AC current clamp with removable jaw kpn: 365 kpn_dash: kpn_clear: 365 bkpn: FLUKE 365 bkpn_clear: FLUKE 365 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 3790607 sr_ns: FLUKE3790607
r: 02836043 p: 284.798 pid: 70920 b: FLUKE q: 3 st: 1 lt: 1 ean: 0095969854108 sr: FLUKE 4910322 sr_no_br: 4910322 sr_no_br_cl: 4910322 sr_cl: FLUKE4910322 sr_dash: sold: 21929.446 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 600 V Measurement temperature No Digital Yes Battery size AA Low battery message Yes Automatic shut-off Yes With current clamp Yes Max. current AC/DC 200 A Measurement Lo-Z No Measurement of noise No Measurement of electrical capacity No Measurement frequency No Measurement resistance No Current measurement Yes Measurement voltage Yes n: FLUKE T6-600 Electrical tester - 4910322 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: Measures voltages... without measuring lead Measure voltages up to 600 V AC via the open fork, without measuring lead to contact active voltage. + Without opening covers or removing wire nuts. For wires up to AWG 4/0 (120 mm2), with a load of up to 200 A. It will change your work. Safer. Faster. Easier. Key features: Key product features FieldSense technology for measuring AC voltage, current and frequency without making electrical contact with active voltage+ 1 to 600 V AC voltage 0.1 to 200 A AC True-RMS AC voltage and current Resistance 1 Ohm to 2000 Ohm Works with most wires up to AWG 4/0 (120 mm2) with a jaw opening of 17.8 mm HOLD button temporarily freezes the reading for easy viewing Easy-to-read backlit display Compatible with the optional Fluke TPAK magnetic meter hanger clip for convenient operation Standard two-year warranty; extendable to 4 years by registering the product within 45 days of purchase ds: dsc: kts: Electrical tester kpn: T6-600 kpn_dash: T6 kpn_clear: T6600 bkpn: FLUKE T6-600 bkpn_clear: FLUKE T6600 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 4910322 sr_ns: FLUKE4910322
r: 02765419 p: 775 pid: 72422 b: FLUKE q: 10 st: 1 lt: 1 ean: sr: FLUKE 4695861 sr_no_br: 4695861 sr_no_br_cl: 4695861 sr_cl: FLUKE4695861 sr_dash: sold: 20150 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature No Digital Yes Battery type AA Low battery message Yes Automatic shut-off Yes With current clamp Yes Diode test No Max. current AC/DC 2500 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance No Current measurement Yes Measurement voltage Yes Max. electrical capacity 1000 µF Max. frequency 0,5 kHz n: FLUKE 376 FC True-RMS-AC/DC current clamp with iFlex - 4695861 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: The Fluke 376 FC is part of the Fluke Connect series of wireless test and measurement instruments. Now you can do the following: Log measurements and record their trends for intermittent fault detection Send results wirelessly via the Fluke Connect Measurements app Instantly create and send reports from location Stay safe outside the arc discharge zone thanks to Bluetooth connectivity to your Apple and Android devices The Fluke 376 FC is the direct successor to the Fluke 376 current clamp. Key features: Connect your meter to your smartphone, with Fluke Connect Measurements Read read readings from a safe distance on your phone, while wearing less personal protective equipment and your meter bears all the risks Store results directly on your phone and in the cloud Record intermittent faults while performing other tasks, thanks to the Fluke 376 FC's logging capabilities Create and share reports from location via email, or make real-time calls with the ShareLive video call feature The iFlex flexible current clamp extends the measurement range to 2500 A AC; it provides access to thick conductors in tight spaces (included) TPAK magnetic suspension strap (included) Integrated low-pass filter for frequency-controlled drives, for accurate measurements on motor drives Fluke proprietary inrush current measurement technology that filters noise from the circuit and records motor inrush current exactly as determined by the circuit protection. Safety class CAT IV 600 V, CAT III 1000 V Three-year warranty Carrying case Measurement functions: 1000 A AC and DC current measurement 2500 A AC current measurement with the iFlex flexible current clamp 1000 V AC and DC voltage measurement True-RMS voltage and current for accurate measurement of non-linear signals Frequency measurement up to 500 Hz with both jaws and iFlex Resistance measurement up to 60 kOhm with through-bell test Min/Max/Average recording and inrush current measurement for automatic recording of variations Measuring range of 500 mV DC for use with other accessories 1000µF capacitance measurement ds: dsc: kts: True-RMS-AC/DC current clamp with iFlex kpn: 376 FC kpn_dash: kpn_clear: 376FC bkpn: FLUKE 376 FC bkpn_clear: FLUKE 376FC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 4695861 sr_ns: FLUKE4695861
r: 02120350 p: 628.487 pid: 96425 b: FLUKE q: 4 st: 1 lt: 1 ean: 0095969586733 sr: FLUKE 3947858 sr_no_br: 3947858 sr_no_br_cl: 3947858 sr_cl: FLUKE3947858 sr_dash: sold: 18226.123 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature Yes Digital Yes Battery size 9V Low battery message Yes Automatic shut-off Yes With current clamp No Diode test Yes Max. current AC/DC 10 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 10000 µF Max. frequency 200 kHz Max. resistance 50 MOhm n: FLUKE 87 V True-RMS digital multimeter for industrial use - 3947858 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: Accuracy and diagnostic features for optimum industrial productivity The new Fluke 87 V and 83 V has improved measurement and troubleshooting functions, higher resolution and greater accuracy for troubleshooting even more faults in motor drives, business automation, power distribution devices and electromechanical equipment. The 80 Series V shares many similarities with the classic 80 Series, but offers more troubleshooting capabilities, even greater safety, even more ease of use and better protection against impacts. The new 80 Series V has been independently tested and complies with the 2nd edition of ANSI/ISA S82.01 and EN61010-1 CAT IV 600 V/CAT III 1000 V. The instruments can withstand impulses in excess of 8,000 V and reduce the risks posed by power surges and spikes. Key features A unique function for accurate voltage and frequency measurements at variable speed drives and other equipment causing electrical disturbances (87 V). A built-in thermometer makes it easy to take temperature measurements without having to carry a separate instrument (87 V). Optional magnetic hanging clip for easy installation and reading while leaving your hands free for other tasks. Thanks to the large-digit display and bright backlight with two levels of illumination, the 80 Series V is significantly easier to read than older models. Electrical safety All inputs are protected in accordance with the 2nd edition of ANSI/ISA S82.01 and EN61010-1 CAT IV 600 V and CAT III, 1000 V. The instruments can withstand impulses in excess of 8,000 V and reduce the risks associated with current surges and spikes. Accurate measurement of complex signals Until now, there was no multimeter that could accurately measure AC drives. But the new Fluke 87V is specifically designed to handle such complex signals. Imagine the potential productivity gains achieved when troubleshooting drive systems is no longer a matter of guesswork. The measurements are correct every time. A unique feature for accurate measurements of pulse-width modulated AC voltage with noise. Measure accurately at the ASD and motor terminals Measure frequency (motor speed) accurately. The frequency measurement is not affected by the frequency of the ASD carrier Measure the AC current with an optional current clamp Compare the reading of the 87 V with the display on the ASD Special shielding blocks high-frequency noise and voltage generated by large drive systems ds: dsc: Scope of delivery TL75 measuring leads AC175 crocodile clips Holster 9 V battery (fitted) 80BK temperature probe kts: True-RMS digital multimeter for industrial use kpn: 87 V kpn_dash: kpn_clear: 87V bkpn: FLUKE 87 V bkpn_clear: FLUKE 87V c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 3947858 sr_ns: FLUKE3947858
r: 03180589 p: 878.847 pid: 73722 b: FLUKE q: 0 st: lt: 27 ean: 0195112002148 sr: FLUKE 5225723 sr_no_br: 5225723 sr_no_br_cl: 5225723 sr_cl: FLUKE5225723 sr_dash: sold: 17576.94 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature No Digital Yes Battery size AA Low battery message Yes Automatic shut-off Yes With current clamp Yes Diode test No Max. current AC/DC 2500 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance No Current measurement Yes Measurement voltage Yes Max. electrical capacity 1000 µF Max. frequency 0,5 kHz n: FLUKE 378 FC True-RMS wireless AC/DC current clamp with iFlex - 5225723 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description Measure voltage and current with your current clamp Test faster and safer, all without touching a live wire, with FieldSense technology. Mains power quality indicator shows if there are problems with equipment or power supply Complete 3-phase voltage and current testing in fewer steps Complete set calculating phase-to-ground and phase-to-phase values Displayed on your smartphone and stored in the cloud via Fluke Connect software Phase rotation calculated and displayed on Fluke Connect software No more handwritten notes or complicated arithmetic ds: dsc: Scope of delivery 378 FC True-RMS non-contact current clamp iFlex flexible current clamp (18 inches; 48 cm) TL224 test leads with silicone insulation TP175 TwistGuard test probes AC285 earth clamp (black, one piece) TPAK magnetic suspension kit, with 23 cm (9 inches) suspension strap Carrying case Quick guide kts: True-RMS wireless AC/DC current clamp with iFlex kpn: 378 FC kpn_dash: kpn_clear: 378FC bkpn: FLUKE 378 FC bkpn_clear: FLUKE 378FC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 5225723 sr_ns: FLUKE5225723
r: 02839962 p: 167.773 pid: 117157 b: MILWAUKEE q: 0 st: lt: 10 ean: 4002395238064 sr: MILWAUKEE 4933416976 sr_no_br: 4933416976 sr_no_br_cl: 4933416976 sr_cl: MILWAUKEE4933416976 sr_dash: sold: 17280.619 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 600 V Measurement temperature Yes Max. current AC/DC 10 A Digital Yes Battery size AA Automatic shut-off Yes Diode test No Continuity test Yes Measurement Lo-Z Yes With current clamp No Measurement of noise No Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 1000 µF Max. frequency 50 kHz Measurement of electrical capacity Yes Max. resistance 40 MOhm n: MILWAUKEE 2217-40 digital multimeter up to 600V AC/DC - 4933416976 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description TRMS always guarantees accurate readings High contrast, easy to read display provides clearer readings Cat III 600 V for increased safety Side mounted dial for one-handed use Feature set tailored to electrician - for intuitive use Lo-Z. - always guaranteed accurate readings Versatile contact temperature measurement Slide rail for accessory mount Supplied with electrical test lead set, thermocouple (dual banana) and 2 x AA batteries ds: dsc: Scope of delivery 2x AA battery Measuring cable set Thermocouple (double banana) Storage bag kts: digital multimeter up to 600V AC/DC kpn: 2217-40 kpn_dash: 2217 kpn_clear: 221740 bkpn: MILWAUKEE 2217-40 bkpn_clear: MILWAUKEE 221740 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Milwaukee / Milwaukee tools / Milwaukee measuring and inspection technique / Milwaukee digital measuring and inspection instruments / Milwaukee digital measuring instruments / Milwaukee multimeter sr_no_br_cl_ns: 4933416976 sr_ns: MILWAUKEE4933416976
r: 02287095 p: 423.363 pid: 95695 b: FLUKE q: 15 st: 1 lt: 1 ean: 0095969095891 sr: FLUKE 1592874 sr_no_br: 1592874 sr_no_br_cl: 1592874 sr_cl: FLUKE1592874 sr_dash: sold: 16511.157 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature No Digital Yes Battery size 9V Low battery message Yes Automatic shut-off Yes With current clamp No Max. current AC/DC 10 A Continuity test Yes Measurement Lo-Z No Diode test Yes Measurement of noise No Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 10000 µF Max. frequency 100 kHz Max. resistance 50 MOhm Measurement of electrical capacity Yes n: FLUKE 177 EGFID Digital RMS multimeter up to 1000V AC/DC - 10A AC/DC - 1592874 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description Fluke 177 digital multimeter True RMS. The new multimeter standard The three models in the new 170 series are the new standard for general purpose multimeters. They set the standard by incorporating aspects such as accuracy, functionality, ease of use, safety and reliability. Key features True RMS voltage and current value measurements Basic accuracy of 0.09% Resolution 6000 counts Digital display with analogue bargraph and backlighting Manual and automatic range setting Display Hold and Auto Hold Frequency and capacitance measurement Resistance measurement, dial-through and diode test Min/Max/Average recording Smoothing for more stable reading of rapidly fluctuating input signals Easy battery replacement without opening the housing Calibration with closed housing via the front panel Ergonomic housing with integrated protective holster EN61010-1 CAT III 1000 V / CAT IV 600 V Measures twice as fast as other multimeters Safety standards All inputs are protected in accordance with EN61010-1 CAT IV 600V/CAT III 1000V. CSA and TÜV certified. ds: dsc: Scope of delivery 9V battery installed Test leads Operating instructions kts: Digital RMS multimeter up to 1000V AC/DC - 10A AC/DC kpn: 177 EGFID kpn_dash: kpn_clear: 177EGFID bkpn: FLUKE 177 EGFID bkpn_clear: FLUKE 177EGFID c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 1592874 sr_ns: FLUKE1592874
r: 02455077 p: 546.958 pid: 96902 b: FLUKE q: 3 st: 1 lt: 1 ean: 0095969586634 sr: FLUKE 3947719 sr_no_br: 3947719 sr_no_br_cl: 3947719 sr_cl: FLUKE3947719 sr_dash: sold: 14767.866 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature Yes Digital Yes Battery type 9V Low battery message Yes Automatic shut-off Yes With current clamp No Diode test Yes Max. current AC/DC 10 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 10000 µF Max. frequency 100 kHz Max. resistance 50 MOhm n: FLUKE 179/EDA2 digital multimeter + accessories combokit - 3947719 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description The Fluke 179 is the preferred solution for professional technicians worldwide Includes all the features you need for troubleshooting and repair of electrical and electronic systems Features accurate True-RMS AC current and voltage plus frequency, capacitance, resistance, continuity and diode testing Increases productivity with manual and automatic range setting, display hold, auto hold and min/max recording Large backlit digital display is easy to read in dark areas and includes an analogue bar graph for viewing trends or unstable signals ds: dsc: Scope of delivery 179 True-RMS digital multimeter 80BK-A DMM temperature measuring probe Integrated 9V battery User manual AC280 SureGrip hook clamp set TL910 Electronic test lead kit TL224 SureGrip silicone test lead kit TPAK ToolPak magnetic hanging clip Soft carry case kts: digital multimeter + accessories combokit kpn: 179/EDA2 kpn_dash: kpn_clear: 179EDA2 bkpn: FLUKE 179/EDA2 bkpn_clear: FLUKE 179EDA2 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 3947719 sr_ns: FLUKE3947719
r: 02958317 p: 1379.297 pid: 71449 b: FLUKE q: 0 st: lt: 8 ean: 0095969799669 sr: FLUKE 4699325 sr_no_br: 4699325 sr_no_br_cl: 4699325 sr_cl: FLUKE4699325 sr_dash: sold: 12413.673 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature Yes Digital Yes Battery size AA Low battery message Yes Automatic shut-off Yes With current clamp No Diode test Yes Max. current AC/DC 10 A Measurement Lo-Z Yes Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 100000 µF Max. frequency 1000 kHz Max. resistance 500 MOhm n: FLUKE 289/FVF/IR3000 combination kit 289 multimeter + View Forms software (with ir3000 FC connector) - 4699325 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: Achieve maximum productivity with the combination kit of the Fluke 289 and FlukeView Forms software. The Fluke 289 with its built-in data logger and TrendCapture feature lets you detect hard-to-find, intermittent faults by monitoring certain equipment functions while performing other work in the meantime. With the FlukeView Forms software, you can overlay data from six different meters or time periods to demonstrate cause-and-effect relationships or for condition monitoring purposes. Turn your data into clear graphs and tables, for professional reporting or for analysing individual readings or series of readings. The 289 is compatible with the Fluke ir3000 FC infrared connector, so you can share live measurements on your iOS or Android device using the Fluke Connect Mobile App. The 289/FVF combination kit, which now includes the ir3000 FC connector, gives you a practical and affordable option of performing predictive maintenance. Key features: NEW ? Now compatible with Fluke Connect Mobile App and all Fluke FC-enabled measuring instruments thanks to the included ir3000 FC infrared connector. NEW ? Show your team what you see immediately with the ShareLive video call feature using the Fluke Connect Mobile App and the ir3000 FC wireless connector. TrendCapture graphically displays a logged data session to quickly determine if anomalies have occurred. Zooming in on trends offers unprecedented possibilities for viewing and analysing TrendCapture data; up to 14 times zoom in. The selectable AC filter (smoothing mode) allows a more stable reading to be displayed when the input signal changes rapidly or contains a lot of noise. Adjustable recording thresholds and Auto Hold by defining a percentage change for measurements at the start of a new event. Large dot matrix display, 1/4 VGA, up to 50,000 counts and with white backlight. Log function with extended memory for independent monitoring of signals for a defined period of time. With the integrated TrendCapture function, you can view a graphical display of recorded measurement values without a PC. Store up to as many as 15,000 recorded events. Multiple log sessions can be saved before downloading to a PC. Two connections for 50-ohm range with 1 milliohm resolution and 10 mA source current. Useful for measuring the resistance of motor windings and comparing differences in them or for measuring contact resistance. Low-pass filter for accurate simultaneous voltage and frequency measurements in frequency-controlled drives and other devices that cause electrical disturbances. LoZ Volts. Low input impedance, prevents erroneous readings due to 'phantom voltage'. Also recommended for testing for presence or absence of (mains) voltage. Internal auxiliary screens for measurement functions. Uncertain about a function? Go to that function and press the 'i' key. Other features Real-time clock for automatic timing of stored measurement values. Relative mode for eliminating test lead resistance when measuring low-resistance or capacitance values. True-RMS AC voltage and current for accurate measurements on non-linear signals. Measures up to 10 A (20 A for 30 seconds). Capacitance range 100 mF. Peak recording for recording transients at speeds up to 250 ?s. Premium measuring leads and crocodile clips included. Banana plugs included. Optional magnetic hanging clip for easy attachment and reading while leaving your hands free for other tasks. FlukeView Forms software lets you document, store and analyse individual readings or a range of readings, then turn them into professional-looking documents. Limited lifetime warranty. ds: dsc: Scope of delivery Fluke-289 True-RMS electronic multimeter with logging function and TrendCapture FlukeView Forms software and cable 80BK-A thermocouple probe CAT III 1000 V 10 A modular test leads (red and black) CAT II 1000 V 10 A modular measuring probes (red and black) and caps CAT III 1000 V 10 A crocodile clips (red and black) C280 carrying case to protect the instrument and store accessories Set of banana plugs TPAK magnet pendant for hands-free use Fluke ir3000 FC infrared connector for Fluke Connect communication kts: combination kit 289 multimeter + View Forms software (with ir3000 FC connector) kpn: 289/FVF/IR3000 kpn_dash: kpn_clear: 289FVFIR3000 bkpn: FLUKE 289/FVF/IR3000 bkpn_clear: FLUKE 289FVFIR3000 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 4699325 sr_ns: FLUKE4699325
r: 02468931 p: 98.9 pid: 108691 b: RIDGID q: 2 st: 1 lt: 1 ean: 0095691374288 sr: RIDGID 37428 sr_no_br: 37428 sr_no_br_cl: 37428 sr_cl: RIDGID37428 sr_dash: sold: 9296.6 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 600 V Measurement temperature Yes Digital Yes Battery size 9V Max. current AC/DC 1000 A Automatic shut-off Yes With current clamp Yes Diode test Yes Continuity test Yes Measurement Lo-Z No Low battery message Yes Measurement of noise No Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 40000 µF Max. frequency 4 kHz Max. resistance 40 MOhm Measurement of electrical capacity Yes n: RIDGID Micro CM-100 digital clamp meter - 37428 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product Description The micro CM-100 is a high-capacity True RMS and AutoRanging Digital Current Clamp with a large measuring range.The meter can be fitted around cables with an outer diameter of up to 30 mm and measure current up to 1000 A AC/DC. Besides measuring AC/DC current, the micro CM-100 can also be used as a multimeter for 8 other functions. The large backlit LCD display shows measured values clearly and accurately.The small, double-cast design is easy to operate with one hand and can easily be used in confined spaces with cables.The micro CM-100 comes with soft carrying case, measuring cables, a Type K temperature probe and a 9 V battery. Large capacity and large measuring range 10 functions in one AutoRanging/True RMS ds: dsc: Scope of delivery Micro CM-100 Measuring cables with protection, black and red K-type adapter and temperature probe Soft case 1x 9V battery kts: digital clamp meter kpn: Micro CM-100 kpn_dash: Micro CM kpn_clear: MicroCM100 bkpn: RIDGID Micro CM-100 bkpn_clear: RIDGID MicroCM100 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Ridgid / Ridgid tools / Ridgid measuring and inspection technique / Ridgid digital measuring and inspection instruments / Ridgid digital measuring instruments / Ridgid multimeter sr_no_br_cl_ns: 37428 sr_ns: RIDGID37428
r: 02773467 p: 343.363 pid: 72427 b: FLUKE q: 0 st: lt: 7 ean: 0095969344838 sr: FLUKE 2583601 sr_no_br: 2583601 sr_no_br_cl: 2583601 sr_cl: FLUKE2583601 sr_dash: sold: 8927.438 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 600 V Measurement temperature Yes Digital Yes Battery size 9V Low battery message Yes Automatic shut-off Yes With current clamp No Diode test Yes Measurement Lo-Z Yes Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency No Measurement resistance Yes Current measurement No Measurement voltage Yes Max. electrical capacity 1000 µF Max. resistance 40 MOhm n: FLUKE 116 compact HVAC multimeter up to 600V AC/DC - with temperature and microampere measurement - 2583601 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: Designed by electricians. Manufactured by Fluke. Compact True-rms meter for troubleshooting in heating, ventilation and air-conditioning (HVAC) equipment. The Fluke 116 is designed specifically for HVAC specialists. It has all the features an HVAC meter needs, including temperature and microampere measurement, to quickly troubleshoot problems in HVAC devices and flame sensors. Also check out the Fluke 114 electrical multimeter, the Fluke 115 multimeter, and the Fluke 117, the multimeter with non-contact voltage locator for electricians. Key features Built-in thermometer for HVAC applications Microampere measurement for testing flame sensors Low input impedance: helps prevent erroneous readings due to phantom voltage Large display with white LED backlight for use in dimly lit environments Resistance, continuity, frequency and capacitance Provides Min / Max / Average for recording signal fluctuations Compact ergonomic design for one-handed operation. Suitable for the optional magnetic suspension system (ToolPak) Safety specification CAT III 600 V ds: dsc: Scope of delivery 116 digital multimeter 4 mm silicone measuring lead set 80BK integrated temperature measuring probe Yellow protective snap-on casing Installed 9 V battery User's manual kts: compact HVAC multimeter up to 600V AC/DC - with temperature and microampere measurement kpn: 116 kpn_dash: kpn_clear: 116 bkpn: FLUKE 116 bkpn_clear: FLUKE 116 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 2583601 sr_ns: FLUKE2583601
