r: 02952108 p: 3148.595 pid: 72103 b: FLUKE q: 0 st: lt: 8 ean: 0095969673440 sr: FLUKE 4352426 sr_no_br: 4352426 sr_no_br_cl: 4352426 sr_cl: FLUKE4352426 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 750P31 pressure module (0 - 700 bar) - 4352426 cn: PRESSURE MODULE cn2: PRESSURE MODULE cn_clear: PRESSUREMODULE d: Key features: The 750P series pressure modules are ideal pressure modules for measuring gauge pressure, differential pressure and absolute pressure with the Fluke 750 and 740 series documenting process calibrators and the 725 and 726 multifunction process calibrators. 0.025% reference uncertainty Specifications for 6 months and 1 year Temperature compensation from 0 °C to 50 °C Digital communication with calibrators, no analogue losses or errors Wide choice of ranges Measurement models for gauge pressure, differential pressure, dual range, absolute pressure and vacuum Product description: A range of 48 pressure modules can perform pressure calibrations from 0 to 1 in water up to 10,000 psi (2.5 mBar to 690 bar). You can find the range of this particular pressure module above under "Scope of delivery". Overpressure modules have one pressure connection and measure pressure relative to atmospheric pressure. Differential pressure modules have two pressure connections and measure the difference between the pressure applied to the high fitting compared to the low fitting. Each module is clearly marked in terms of range, gauge pressure and media compatibility. All modules have NPT, metric (BSP) and M20 adapters. Compatible with all documenting, multifunction and pressure calibrators (including the calibrators: Fluke 754, 752, 726, 725, 721, 719Pro, 719, 717 and the older 741, 743, 744, 701 and 702). Quick and easy measurement Fluke 750P series pressure modules are easy to use. If you want to measure pressure, connect the pressure module to a pressure source or hand pump, then connect the pressure module cable to the calibrator. Apply pressure to the pressure source and this pressure is digitally displayed on the calibrator. With one press of the head, you can display the pressure in 11 different engineering units. When using 750-series documenting process calibrators, pressure measurements can be date-time-stamped and stored electronically for later use. This saves time, reduces errors and supports compliance with quality standards and regulations. ds: dsc: Scope of delivery Pressure module, 0 psi to 10000 psi (0 to 700 bar), (0 to 70 MPa) Adapter from 1/8 NPT male to 1/4 NPT male Adapter from 1/8 NPT male to 1/4 BSP male Adapter from 1/8 NPT male to M20 male Calibration certificate Manual kts: pressure module (0 - 700 bar) kpn: 750P31 kpn_dash: kpn_clear: 750P31 bkpn: FLUKE 750P31 bkpn_clear: FLUKE 750P31 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Pressure module | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke pressure module sr_no_br_cl_ns: 4352426 sr_ns: FLUKE4352426
r: 02952107 p: 3148.595 pid: 72733 b: FLUKE q: 0 st: lt: 8 ean: 0095969673433 sr: FLUKE 4352415 sr_no_br: 4352415 sr_no_br_cl: 4352415 sr_cl: FLUKE4352415 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 750P30 pressure module (0 - 340 bar) - 4352415 cn: PRESSURE MODULE cn2: PRESSURE MODULE cn_clear: PRESSUREMODULE d: Key features: The 750P series pressure modules are ideal pressure modules for measuring gauge pressure, differential pressure and absolute pressure with the Fluke 750 and 740 series documenting process calibrators and the 725 and 726 multifunction process calibrators. 0.025% reference uncertainty Specifications for 6 months and 1 year Temperature compensation from 0 °C to 50 °C Digital communication with calibrators, no analogue losses or errors Wide choice of ranges Measurement models for gauge pressure, differential pressure, dual range, absolute pressure and vacuum Product description: A range of 48 pressure modules can perform pressure calibrations from 0 to 1 in water up to 10,000 psi (2.5 mBar to 690 bar). You can find the range of this particular pressure module above under "Scope of delivery". Overpressure modules have one pressure connection and measure pressure relative to atmospheric pressure. Differential pressure modules have two pressure connections and measure the difference between the pressure applied to the high fitting compared to the low fitting. Each module is clearly marked in terms of range, gauge pressure and media compatibility. All modules have NPT, metric (BSP) and M20 adapters. Compatible with all documenting, multifunction and pressure calibrators (including the calibrators: Fluke 754, 752, 726, 725, 721, 719Pro, 719, 717 and the older 741, 743, 744, 701 and 702). Quick and easy measurement Fluke 750P series pressure modules are easy to use. If you want to measure pressure, connect the pressure module to a pressure source or hand pump, then connect the pressure module cable to the calibrator. Apply pressure to the pressure source and this pressure is digitally displayed on the calibrator. With one press of the head, you can display the pressure in 11 different engineering units. When using 750-series documenting process calibrators, pressure measurements can be date-time-stamped and stored electronically for later use. This saves time, reduces errors and supports compliance with quality standards and regulations. ds: dsc: Scope of delivery Pressure module, 0 psi to 5000 psi (0 to 340 bar), (0 to 34 MPa) Adapter from 1/8 NPT male to 1/4 NPT male Adapter from 1/8 NPT male to 1/4 BSP male Adapter from 1/8 NPT male to M20 male Calibration certificate Manual kts: pressure module (0 - 340 bar) kpn: 750P30 kpn_dash: kpn_clear: 750P30 bkpn: FLUKE 750P30 bkpn_clear: FLUKE 750P30 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Pressure module | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke pressure module sr_no_br_cl_ns: 4352415 sr_ns: FLUKE4352415
r: 03329985 p: 3118.595 pid: 158662 b: FLUKE q: 0 st: lt: 8 ean: 0195112127940 sr: FLUKE 6008183 sr_no_br: 6008183 sr_no_br_cl: 6008183 sr_cl: FLUKE6008183 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE SMFT-1000/LITE multifunction solar energy tester in case - 6008183 cn: MEASURING INSTRUMENT SET cn2: MEASURING INSTRUMENT SET cn_clear: MEASURINGINSTRUMENTSET d: Product description Guarantees compliance with IEC 62446-1, category 1 standards Fast, automatic and accurate safety checks during solar panel installation Measures solar panel output in less than 45 seconds User-friendly interface Streamlined reporting with TruTest Solar Data Management software Improve your safety standards The Fluke SMFT-1000/LITE Set multifunction solar tester is designed to meet the requirements of solar installers looking for a professional tool that can ensure safety and compliance with IEC 62446-1, Category 1 solar installation standards. With a safety specification of CAT III 1000 V (IEC 61010-2) and a clear overvoltage warning, this solar kit keeps you and your colleagues safe on the job site. Fast, automatic and accurate mandatory safety verification With the "Keep the Leads" system and automatic testing function, the SMFT-1000 can test quickly and accurately, saving time and money when installing solar panels while ensuring safety and complying with standard IEC 62446-1 category 1. PV system performance testing Measure the power output of a solar panel in less than 45 seconds to create an I-V curve representing the maximum output power. Analyse the curve to identify performance issues and perform functional tests. With the SMFT-1000, you can compare on-site I-V curve results with the manufacturer's specifications to ensure the panel is operating efficiently. In addition, the Fluke TruTest Solar Database app is available for use with the SMFT-1000 and features specifications of more than 120,000 different types of PV panels that can be loaded into the SMFT-1000 (available in the Google Play Store). Intuitive user interface The high-definition colour screen and colour-coded inputs and test leads allow users of the SMFT-1000 to test with confidence and safety. The analyser also has a visual inspection function, allowing easy compliance with PV system IEC regulations. Comprehensive reporting The TruTest Solar Data Management software simplifies solar testing and reporting. Manage data, perform I-V curve analysis and create compliant reports quickly and easily. ds: dsc: Scope of delivery Carrying case SMFT-1000 multifunction PV analyser Carrying strap TL1000 test lead kit TL1000-MC4 test lead kit kts: multifunction solar energy tester in case kpn: SMFT-1000/LITE kpn_dash: SMFT kpn_clear: SMFT1000LITE bkpn: FLUKE SMFT-1000/LITE bkpn_clear: FLUKE SMFT1000LITE c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Sets / Measuring instrument set | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke sets / Fluke measuring instrument set sr_no_br_cl_ns: 6008183 sr_ns: FLUKE6008183
r: 03343202 p: 3086.598 pid: 159481 b: FLUKE q: 0 st: lt: 10 ean: 0195112119440 sr: FLUKE 5580841 sr_no_br: 5580841 sr_no_br_cl: 5580841 sr_cl: FLUKE5580841 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1674 FC SCH multifunctional installation tester in case - 5580841 cn: INSTALLATION TESTER cn2: INSTALLATION TESTER cn_clear: INSTALLATIONTESTER d: Product description The Fluke 1674 FC multifunction installation tester will revolutionise the way you work. The 1674 FC has all the features of the 1673 FC and also features insulation pre-testing, programmable automatic testing, surge arrestor testing and insulation monitoring device testing. With its ergonomic design, seamless user interface, integrated data management capabilities, wireless connectivity and comprehensive reporting software, the 1674 FC sets the new standard as an integrated installation testing solution. With the 1670-series installation testers, you can check the safety of electrical installations in residential, commercial and industrial applications and comply with IEC 60364 requirements and all relevant local standards of IEC 61557. Perform your required tests up to 30% faster and reduce the time spent on documentation by up to 50%, all with full confidence in the data you collect. Fluke 1670-series multifunction installation testers streamline your installation and test preparations with the help of the intuitive user interface and high-resolution colour touchscreen. You can enter site information and set test routes directly from the tester, your mobile device or from a PC, and as you test you can edit this information directly on the instrument, ensuring accurate data. ds: dsc: Scope of delivery Multifunctional installation tester Heavy-duty power cord with single input connector Carrying case USB-C power adapter for charging Probe for remote measurements Carrying strap Zeroing adapter Measurement leads and probes Alligator clips Li-Ion battery kts: multifunctional installation tester in case kpn: 1674 FC SCH kpn_dash: kpn_clear: 1674FCSCH bkpn: FLUKE 1674 FC SCH bkpn_clear: FLUKE 1674FCSCH c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Installation tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke installation tester sr_no_br_cl_ns: 5580841 sr_ns: FLUKE5580841
r: 08106997 p: 3074.933 pid: 71791 b: FLUKE q: 0 st: lt: 8 ean: 0095969946254 sr: FLUKE 5159990 sr_no_br: 5159990 sr_no_br_cl: 5159990 sr_cl: FLUKE5159990 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE TIS55+ 9HZ thermal imaging camera 9HZ - 5159990 cn: THERMAL IMAGING CAMERA cn2: THERMAL IMAGING CAMERA cn_clear: THERMALIMAGINGCAMERA d: Product description 256 x 192 infrared resolution Asset tagging IR Fusion touch screen Manual and fixed focus Measures up to 550 °C Designed to withstand a 2-metre drop Robust. Reliable. Accurate. At Fluke, we know that accidents happen - instruments are dropped, kicked, stepped on or knocked over. There should be no need to replace an instrument because it falls off the workbench or gets splashed with water or dirt. That is why we designed the TiS55+ thermal imaging camera to withstand a 2-metre drop and be water/dust resistant (IP54). You need to be sure your camera will start every time. Get rid of the clipboard When you have to do so many checks every day, you sometimes forget what you saw and where it was. You may be walking around with a clipboard to take notes. The TiS55+ has a built-in assistant, which means you can finally ditch the clipboard and have all the important information in the images you take. Recorded text record up to 60 seconds of text per thermal image identify exactly what you see in real-time IR-PhotoNotes take pictures of asset numbers and other identifiers use as a reference when viewing thermal images on your computer Asset tagging sort your thermal images by asset simply scan the QR code on your asset, then capture the thermal images Connect the camera to your computer to display the images sorted by asset ds: dsc: Scope of delivery Thermal imaging camera AC power supply (including universal AC adapters) One robust lithium-ion smart battery USB cable 4 GB micro SD card Sturdy hard carrying case with soft transport bag and adjustable hand strap Free download available: Fluke Connect software and user manual kts: thermal imaging camera 9HZ kpn: TIS55+ 9HZ kpn_dash: kpn_clear: TIS559HZ bkpn: FLUKE TIS55+ 9HZ bkpn_clear: FLUKE TIS559HZ c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital detection and inspection instruments / Thermal imaging camera | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital detection and inspection instruments / Fluke thermal imaging camera sr_no_br_cl_ns: 5159990 sr_ns: FLUKE5159990
r: 08107131 p: 2988.99 pid: 166252 b: FLUKE q: 0 st: lt: 8 ean: 0095969865210 sr: FLUKE 4961163 sr_no_br: 4961163 sr_no_br_cl: 4961163 sr_cl: FLUKE4961163 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 4961163 smart 2x infrared telelens cn: ACCESSORIES/PART THERMAL IMAGING CAMERA cn2: ACCESSORIES/PART THERMAL IMAGING CAMERA cn_clear: ACCESSORIESPARTTHERMALIMAGINGCAMERA d: Product description See your measurement object magnified 2 times more than with a standard lens and reduce the need to enter the danger zone in your facility or climb a high ladder to capture the critical infrared details that may indicate there is a problem with your equipment. Avoid the hassle of sending your camera to be calibrated along with the lens - with smart lenses, you can simply attach the lens to any suitable camera and capture images immediately. Manufactured from 100% diamond-turned germanium with engineered coating, the most efficient material available for transferring energy to the detector. Compatible with RSE300 and RSE600 ds: dsc: kts: smart 2x infrared telelens kpn: 4961163 kpn_dash: kpn_clear: 4961163 bkpn: FLUKE 4961163 bkpn_clear: FLUKE 4961163 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Accessories/part thermal imaging camera | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke accessories/part thermal imaging camera sr_no_br_cl_ns: 4961163 sr_ns: FLUKE4961163
r: 03327879 p: 2876 pid: 166129 b: FLUKE q: 0 st: lt: 10 ean: 0195112122020 sr: FLUKE 5590693 sr_no_br: 5590693 sr_no_br_cl: 5590693 sr_cl: FLUKE5590693 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE FEV350/TY2 PRO EV charging station analyser for type 2 with TruTest software in bag - 5590693 cn: TEST DEVICE cn2: TEST DEVICE cn_clear: TESTDEVICE d: Product description Complete solution for safety and performance testing of AC EV charging stations with type 2 connectors Designed for technicians who need to perform and document multiple tests quickly and efficiently without carrying multiple tools Available measurements: PE (safety) earth test beforehand to ensure that no hazardous voltage is present, visual inspection, 30 mA earth leakage switch + 6 mA RDC-DD trip test, rated voltage + phase sequence, automatic control pilot (CP) with waveform analysis, proximity pilot, and fault testing. Supported measurements: earth connection, insulation and loop/grid impedance with Fluke's compatible multifunction installation testers for installation certification/inspections via Bluetooth wireless connection. Wiring configuration diagrams and info screens for seamless integration with TruTest software for report generation. Includes TruTest EV charging software module for documentation and reporting. Provides predefined test plans and successful/failed indications for measurement results to simplify analysis and time spent on testing. ds: dsc: Scope of delivery FEV350/BASIC Test Analyzer FEV300-CON-TY2 Type 2 plug Zero adjustment adapter/TY2 TPAK Magnetic suspension clip Carrying case TruTest software licence kts: EV charging station analyser for type 2 with TruTest software in bag kpn: FEV350/TY2 PRO kpn_dash: kpn_clear: FEV350TY2PRO bkpn: FLUKE FEV350/TY2 PRO bkpn_clear: FLUKE FEV350TY2PRO c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Test device | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke test device sr_no_br_cl_ns: 5590693 sr_ns: FLUKE5590693
r: 03327869 p: 2876 pid: 166141 b: FLUKE q: 0 st: lt: 10 ean: 0195112042984 sr: FLUKE 5348072 sr_no_br: 5348072 sr_no_br_cl: 5348072 sr_cl: FLUKE5348072 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE FEV350/TY2/TY1 EV charging station analyser for type 1 and 2 connectors in bag - 5348072 cn: TEST DEVICE cn2: TEST DEVICE cn_clear: TESTDEVICE d: Product description Complete solution for safety and performance testing of AC EV charging stations with type 2 or type 1 connectors Designed for technicians who need to perform and document multiple tests quickly and efficiently without carrying multiple tools Available measurements: PE (safety) ground test beforehand to ensure that no hazardous voltage is present, visual inspection, 30 mA ground fault switch + 6 mA RDC-DD trip test, rated voltage + phase sequence, automatic control pilot (CP) with waveform analysis, proximity pilot, and fault testing. Supported measurements: earth connection, insulation and loop/grid impedance with Fluke's compatible multifunction installation testers for installation certification/inspections via Bluetooth wireless connection. Wiring configuration diagrams and info screens for seamless integration with TruTest software for report generation. Includes TruTest EV charging software module for documentation and reporting. Provides predefined test plans and successful/failed indications for measurement results to simplify analysis and time spent on testing. ds: dsc: Scope of delivery FEV350/BASIC Test Analyzer FEV300-CON-TY1 Type 1 plug FEV300-CON-TY2 Type 2 plug Zero adjustment adapter/TY1 Zero adjustment adapter/TY2 TPAK Magnetic suspension clip Carrying case kts: EV charging station analyser for type 1 and 2 connectors in bag kpn: FEV350/TY2/TY1 kpn_dash: kpn_clear: FEV350TY2TY1 bkpn: FLUKE FEV350/TY2/TY1 bkpn_clear: FLUKE FEV350TY2TY1 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Test device | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke test device sr_no_br_cl_ns: 5348072 sr_ns: FLUKE5348072
r: 03392939 p: 2827 pid: 178070 b: FLUKE q: 0 st: lt: 8 ean: 0195112148860 sr: FLUKE 6093290 sr_no_br: 6093290 sr_no_br_cl: 6093290 sr_cl: FLUKE6093290 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1673 FC SCH/FEV300 multifunctional installation tester with test adapter set for EV charging stations - 6093290 cn: INSTALLATION TESTER cn2: INSTALLATION TESTER cn_clear: INSTALLATIONTESTER d: Product description Simple bidirectional user interface eliminates complex multi-level menus Easy installation with the colour touch screen, smart device or a PC Fast and accurate testing with automatic test and automatic measurement validation Fluke Connect compatibility eliminates the need for data entry View results and generate certificates on-site with Fluke TruTest-software (not included) The Fluke 1673 FC multifunction installation tester will revolutionise the way you work. The Fluke 1673 FC multifunction installation tester has all the features of the 1672, such as earth resistance testing, automatic test functionality and compatibility with Fluke Connect. With its ergonomic design, seamless user interface, integrated data management capabilities, wireless connectivity and comprehensive reporting software, the 1673 FC sets the new standard as an integrated installation testing solution. With the 1670-series installation testers, you can check the safety of electrical installations in residential, commercial and industrial applications and comply with IEC 60364 requirements and all relevant local standards of IEC 61557. Perform your required tests up to 30% faster and reduce the time spent on documentation by up to 50%, all with full confidence in the data you collect. Fluke 1670-series multifunction installation testers streamline your installation and test preparations with the help of the intuitive user interface and high-resolution colour touchscreen. You can enter site information and set test routes directly from the tester, your mobile device or from a PC, and as you test you can edit this information directly on the instrument, ensuring accurate data. Key features Field-updatable - you can apply rule changes or improvements to the tester in the field. Compact, lightweight (less than 1.6 kg) and with padded neck strap leaving your hands free. Colour touch screen and rotary knob for quick navigation, without complex multi-level menus. Rechargeable 2,500 mAh Li-ion battery for all-day testing. Standard USB-C charging port with fast charging support for convenient charging on the go. Newly designed professional carrying case for transporting and protecting your installation tester and accessories. Additional high-current loop mode allowing faster measurements than with non-trip loop tests for circuits protected by residual current devices. Insulation monitoring devices (IMD) testing. Surge protection device (SPD) functional test. Voltage drop measurement function. Z-max memory for loop tests for easy evaluation of the highest loop test value. Unique zeroing adapter for fast, reliable and accurate compensation for measurement and mains cables. Simultaneous voltage measurements between L-N, L-PE and N-PE using the power cord. This does not require changing the measurement connections. Simultaneously measure tripping time and tripping current of RCCBs (RCCB type AC, A, B, F and GFCI). Measures PEFC or PSC and loop impedance simultaneously and displays them on the dual screen. Ring tests allow you to select the required input connections without having to exchange test leads. Pass-through test with low test current (10 mA) to measure motor windings. The earth potential touch pad detects elevated earth potentials above 50 V and alerts you to potentially dangerous situations. ds: dsc: Scope of delivery Multifunctional installation tester FEV300 test adapter set for EV charging stations Heavy-duty power cord with a single input connector Carrying case USB-C power adapter for charging Probe for remote measurements Carrying strap Zeroing adapter Measurement leads and probes Crocodile clips Li-Ion battery kts: multifunctional installation tester with test adapter set for EV charging stations kpn: 1673 FC SCH/FEV300 kpn_dash: kpn_clear: 1673FCSCHFEV300 bkpn: FLUKE 1673 FC SCH/FEV300 bkpn_clear: FLUKE 1673FCSCHFEV300 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Installation tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke installation tester sr_no_br_cl_ns: 6093290 sr_ns: FLUKE6093290
r: 08106988 p: 2667.666 pid: 158984 b: FLUKE q: 0 st: lt: 10 ean: 0195112013564 sr: FLUKE 5255306 sr_no_br: 5255306 sr_no_br_cl: 5255306 sr_cl: FLUKE5255306 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Alignment tool type Belt alignment tool Measuring range 10 m n: FLUKE 835 belt alignment device with green laser in case (4x AAA batteries) - 5255306 cn: ALIGNMENT TOOL cn2: ALIGNMENT TOOL cn_clear: ALIGNMENTTOOL d: Product description Specially designed for belt alignment work as it is easy to use and requires only one operator. The strong magnets on the two units attach to virtually any belt surface, making it the ideal partner for most belt alignment jobs. It uses the proven OPTALIGN reflected beam principle for maximum angular resolution to generate accurate and reliable measurements. The time-saving method requires no cross-checking and shows offset, vertical and horizontal angle simultaneously. With four AAA batteries, the Fluke 835 offers 6 hours of continuous use. Corrections are quickly made live; true alignment is achieved when the transmitted laser line and the corresponding reflected laser line harmonise with the respective reference line. Advantages Fast, easy, full belt alignment - no training required Efficient operation by one person Reflected laser technology doubles the distance, improving accuracy Light, robust and sturdy: A small tool in your bag to take with you wherever you go No small parts to lose Strong magnets attach to any size of belt or gear ds: dsc: Scope of delivery 835 laser unit (green laser) 835 reflector unit 4 batteries (AAA) Fabric pouch Safety information Quick guide kts: belt alignment device with green laser in case (4x AAA batteries) kpn: 835 kpn_dash: kpn_clear: 835 bkpn: FLUKE 835 bkpn_clear: FLUKE 835 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital detection and inspection instruments / Alignment tool | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital detection and inspection instruments / Fluke alignment tool sr_no_br_cl_ns: 5255306 sr_ns: FLUKE5255306
r: 03215832 p: 2651.9 pid: 73764 b: FLUKE q: 0 st: lt: 8 ean: 0095969865807 sr: FLUKE 4962760 sr_no_br: 4962760 sr_no_br_cl: 4962760 sr_cl: FLUKE4962760 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 20 m n: FLUKE 4962760 9 mm scope with 20 m video scope probe with reel cn: TEST PROBE SET cn2: TEST PROBE SET cn_clear: TESTPROBESET d: ds: dsc: kts: 9 mm scope with 20 m video scope probe with reel kpn: 4962760 kpn_dash: kpn_clear: 4962760 bkpn: FLUKE 4962760 bkpn_clear: FLUKE 4962760 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Test probe set | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke test probe set sr_no_br_cl_ns: 4962760 sr_ns: FLUKE4962760
r: 08107142 p: 2622 pid: 73526 b: FLUKE q: 0 st: lt: 8 ean: 0195112035023 sr: FLUKE 5315203 sr_no_br: 5315203 sr_no_br_cl: 5315203 sr_cl: FLUKE5315203 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE TRUTES-LITE-M10 software licence code for TruTest Lite (10 workstations) - 5315203 cn: SOFTWARE cn2: SOFTWARE cn_clear: SOFTWARE d: Product description Easily manage measurement data, including installation and commissioning tests for solar sites through an intuitive and modern interface Quickly create test certificates and reports Free updates for 5 years after installation Easy data collection and database transfers Includes The ability to deploy TruTest on 10 workstations The ability to assign 2 users to each of the 10 TruTest workstations The easy-to-use data management solution The Fluke TruTest software is designed to eliminate the problems associated with traditional data management and reporting of electrical systems. Whether you are testing installations with fixed wiring or devices in an office, checking repair results in a workshop or performing annual inspections, good data management is essential for creating understandable reports for customers. Compatible with a growing number of test and measurement instruments from Fluke and Beha-Amprobe. TruTest software allows you to quickly and easily import measurement results directly from your measuring instruments, manage files transferred from instruments or manually enter data if required. With a streamlined user interface and intuitive workflow, measurement data can be easily formatted into printable test certificates and reports, complete with your company logo and electronic signature. Solar reporting solution Fluke TruTest software now supports the SMFT-1000 multifunction PV tester and performance analyser. Whether you are analysing panel efficiency via I-V curves or testing the system for safety via the Category 1 test regime in accordance with IEC 62446-1, good data management is crucial for producing easy-to-understand reports for customers. Import measurement results directly from your multifunction solar tester to the computer, organise and analyse the data, compare individual device data with previously imported measurements and deliver a comprehensive and visual customer report. Streamlined data management Manage test results and customer and location data with ease and quickly create reports with the intuitive user interface and report builder. Create customised automatic tests Choose from predefined automatic test codes or create your own to ensure technicians collect the right data at the right location. Dashboard interface With the live intuitive on-screen dashboard interface, users can instantly see the status of all their clients and navigate to detail level if required. Compatibility Fluke SMFT-1000 Fluke 6500 Fluke 6500-2 Beha-Amprobe GT-600 Beha-Amprobe GT-650 Beha-Amprobe GT-800 Beha-Amprobe GT-900 Fluke 1653 Fluke 1653B Fluke 1654B Fluke 1662 Fluke 1663 Fluke 1664 FC Beha-Amprobe ProInstall-100 Beha-Amprobe ProInstall-200 Databases from the Fluke DMS software or the Beha-Amprobe ES control software can also be converted and transferred to the TruTest software platform*. Microsoft Access Runtime 2016 is required for the DMS/EsControl database conversion. Comprehensive reporting Fluke's TruTest software simplifies the reporting process, allowing you to generate easy-to-understand test certificates and reports as quickly as possible, saving you time and money. A growing list of regional reports, including DIN VDE 0701-0702, ÖVE/ÖNORM E 8701, SNR 462638, NEN3140, IEC 62446-1 and EU directive 2009/104/EC (BetrSichV). All these reports are available at the touch of a button, and a preconfigured international template ensures that the TruTest software covers every location. Structure topology Hierarchical tree topology is used to represent clients, locations and devices. This makes the application ideal for use in larger networks, while keeping you flexible in terms of testing and reporting. Each element is displayed as a single structure node and the properties of each node are displayed after selecting it. The tree topology can be maintained by adding, deleting, copying and/or editing nodes and copying sub-trees. ds: dsc: kts: software licence code for TruTest Lite (10 workstations) kpn: TRUTES-LITE-M10 kpn_dash: TRUTES kpn_clear: TRUTESLITEM10 bkpn: FLUKE TRUTES-LITE-M10 bkpn_clear: FLUKE TRUTESLITEM10 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Software | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke software sr_no_br_cl_ns: 5315203 sr_ns: FLUKE5315203
r: 02952068 p: 2620 pid: 72725 b: FLUKE q: 0 st: lt: 8 ean: 0095969673297 sr: FLUKE 4352270 sr_no_br: 4352270 sr_no_br_cl: 4352270 sr_cl: FLUKE4352270 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 750P00 pressure module (0 - 2.5 mbar) - 4352270 cn: PRESSURE MODULE cn2: PRESSURE MODULE cn_clear: PRESSUREMODULE d: Key features: The 750P series pressure modules are ideal pressure modules for measuring gauge pressure, differential pressure and absolute pressure with the Fluke 750 and 740 series documenting process calibrators and the 725 and 726 multifunction process calibrators. 0.025% reference uncertainty Specifications for 6 months and 1 year Temperature compensation from 0 °C to 50 °C Digital communication with calibrators, no analogue losses or errors Wide choice of ranges Measurement models for gauge pressure, differential pressure, dual range, absolute pressure and vacuum Product description: A range of 48 pressure modules can perform pressure calibrations from 0 to 1 in water up to 10,000 psi (2.5 mBar to 690 bar). You can find the range of this particular pressure module above under "Scope of delivery". Overpressure modules have one pressure connection and measure pressure relative to atmospheric pressure. Differential pressure modules have two pressure connections and measure the difference between the pressure applied to the high fitting compared to the low fitting. Each module is clearly marked in terms of range, gauge pressure and media compatibility. All modules have NPT, metric (BSP) and M20 adapters. Compatible with all documenting, multifunction and pressure calibrators (including the calibrators: Fluke 754, 752, 726, 725, 721, 719Pro, 719, 717 and the older 741, 743, 744, 701 and 702). Quick and easy measurement Fluke 750P series pressure modules are easy to use. If you want to measure pressure, connect the pressure module to a pressure source or hand pump, then connect the pressure module cable to the calibrator. Apply pressure to the pressure source and this pressure is digitally displayed on the calibrator. With one press of the head, you can display the pressure in 11 different engineering units. When using 750-series documenting process calibrators, pressure measurements can be date-time-stamped and stored electronically for later use. This saves time, reduces errors and supports compliance with quality standards and regulations. ds: dsc: Scope of delivery Pressure module, 0 to 1 in H2O (0 to 2.5 mbar), (0 to 0.25 kPa) Adapter from 1/8 NPT male to 1/4 NPT male Adaptor from 1/8 NPT male to 1/4 BSP male Adapter from 1/8 NPT male to M20 male Calibration certificate Manual kts: pressure module (0 - 2.5 mbar) kpn: 750P00 kpn_dash: kpn_clear: 750P00 bkpn: FLUKE 750P00 bkpn_clear: FLUKE 750P00 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Pressure module | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke pressure module sr_no_br_cl_ns: 4352270 sr_ns: FLUKE4352270
r: 03317202 p: 2605 pid: 73205 b: FLUKE q: 0 st: lt: 8 ean: 0195112122433 sr: FLUKE 5592405 sr_no_br: 5592405 sr_no_br_cl: 5592405 sr_cl: FLUKE5592405 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1537 advanced insulation resistance tester and megohmmeters - 5592405 cn: INSULATION RESISTANCE TESTER cn2: INSULATION RESISTANCE TESTER cn_clear: INSULATIONRESISTANCETESTER d: Product description User-selectable voltages from 250 V - 2500 V Measurement of insulation resistance up to 500 GOhm Short-circuit current up to 5 mA for fast, stable measurements Automatically calculate PI and DAR Perform 1300+ insulation tests on one set of batteries Fast, accurate and reliable insulation tests in a lightweight, portable package The Fluke 1535 and 1537 2500 V insulation resistance testers are designed to simplify first-line troubleshooting, whether you are on the factory floor or working on site at a solar installation. With these testers, where the user can select test voltages from 250 V to 2,500 V and with resistance measurements up to 500 GOhm, you can do more work with a single instrument. Featuring an intuitive user interface, a short-circuit current of up to 5 mA and a CAT IV specification of 600 V, these portable high-voltage insulation testers can make fast and stable resistance measurements wherever you take them. The 1537 Insulation Resistance Tester also allows you to save measurements for later review or transfer via PC using the supplied software. Selectable voltage tests: Customise your tests with user-selectable voltages of 250 V, 500 V, 1,000 V and 2,500 V for both industrial and solar energy applications. Comprehensive insulation resistance measurement: Achieve insulation resistance measurements up to 500 GOhm for in-depth analysis. Intelligent calculations: Automatically calculates polarisation index (PI) and dielectric absorption ratio (DAR, Dielectric Absorption Ratio), minimising the influence of environmental factors. High measurement capacity: Perform up to 1,300 measurements at 2,500 V or 6,500 measurements at 250 V with a single set of batteries, increasing productivity. Enhanced safety features: Benefit from a CAT IV specification of 600V and a built-in voltage alarm function for increased safety during operations. Dielectric discharge rate calculation: Automatically calculate the dielectric discharge rate (DD, Discharge Rate) to help identify problems with inaccessible insulation. Slope test mode: Linearly increase the applied test voltage by 100 V/s to identify potentially hard-to-identify faults. Visual and audible continuity indicator:Check continuity visually on the screen or with the audible indicator, so you can concentrate on your testing procedure without looking at the display. Customisable test parameters:Set user-defined labels, adjust test duration and save measurement results for a customised testing experience. Effortless data management:Download and manage data effortlessly with the included PC software. < liComprehensive warranty:Enjoy peace of mind with an extended 3-year warranty. ds: dsc: Scope of delivery Fluke 1537 insulation resistance tester Test leads with alligator clips (red, black, green) Probe (red, black) Carrying case USB cable) PC software (downloadable from Fluke website) kts: advanced insulation resistance tester and megohmmeters kpn: 1537 kpn_dash: kpn_clear: 1537 bkpn: FLUKE 1537 bkpn_clear: FLUKE 1537 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Insulation resistance tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke insulation resistance tester sr_no_br_cl_ns: 5592405 sr_ns: FLUKE5592405
r: 02952187 p: 2580 pid: 72763 b: FLUKE q: 0 st: lt: 8 ean: 0095969673723 sr: FLUKE 4352706 sr_no_br: 4352706 sr_no_br_cl: 4352706 sr_cl: FLUKE4352706 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 750RD5 pressure module (-1 - 2 bar) - 4352706 cn: PRESSURE MODULE cn2: PRESSURE MODULE cn_clear: PRESSUREMODULE d: Key features: The 750P series pressure modules are ideal pressure modules for measuring gauge pressure, differential pressure and absolute pressure with the Fluke 750 and 740 series documenting process calibrators and the 725 and 726 multifunction process calibrators. 0.025% reference uncertainty Specifications for 6 months and 1 year Temperature compensation from 0 °C to 50 °C Digital communication with calibrators, no analogue losses or errors Wide choice of ranges Measurement models for gauge pressure, differential pressure, dual range, absolute pressure and vacuum Product description: A range of 48 pressure modules can perform pressure calibrations from 0 to 1 in water up to 10,000 psi (2.5 mBar to 690 bar). You can find the range of this particular pressure module above under "Scope of delivery". Overpressure modules have one pressure connection and measure pressure relative to atmospheric pressure. Differential pressure modules have two pressure connections and measure the difference between the pressure applied to the high fitting compared to the low fitting. Each module is clearly marked in terms of range, gauge pressure and media compatibility. All modules have NPT, metric (BSP) and M20 adapters. Compatible with all documenting, multifunction and pressure calibrators (including the calibrators: Fluke 754, 752, 726, 725, 721, 719Pro, 719, 717 and the older 741, 743, 744, 701 and 702). Quick and easy measurement Fluke 750P series pressure modules are easy to use. If you want to measure pressure, connect the pressure module to a pressure source or hand pump, then connect the pressure module cable to the calibrator. Apply pressure to the pressure source and this pressure is digitally displayed on the calibrator. With one press of the head, you can display the pressure in 11 different engineering units. When using 750-series documenting process calibrators, pressure measurements can be date-time-stamped and stored electronically for later use. This saves time, reduces errors and supports compliance with quality standards and regulations. ds: dsc: Scope of delivery Pressure module, -15 psi to 30 psi (-1 to 2 bar), (-100 to 200 kPa) Adapter from 1/8 NPT male to 1/4 NPT male Adapter from 1/8 NPT male to 1/4 BSP male Adapter from 1/8 NPT male to M20 male Calibration certificate Manual kts: pressure module (-1 - 2 bar) kpn: 750RD5 kpn_dash: kpn_clear: 750RD5 bkpn: FLUKE 750RD5 bkpn_clear: FLUKE 750RD5 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Pressure module | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke pressure module sr_no_br_cl_ns: 4352706 sr_ns: FLUKE4352706
r: 02952189 p: 2580 pid: 71240 b: FLUKE q: 0 st: lt: 8 ean: 0095969673730 sr: FLUKE 4352714 sr_no_br: 4352714 sr_no_br_cl: 4352714 sr_cl: FLUKE4352714 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 750RD6 pressure module (-1 - 7 bar) - 4352714 cn: PRESSURE MODULE cn2: PRESSURE MODULE cn_clear: PRESSUREMODULE d: Key features: The 750P series pressure modules are ideal pressure modules for measuring gauge pressure, differential pressure and absolute pressure with the Fluke 750 and 740 series documenting process calibrators and the 725 and 726 multifunction process calibrators. 0.025% reference uncertainty Specifications for 6 months and 1 year Temperature compensation from 0 °C to 50 °C Digital communication with calibrators, no analogue losses or errors Wide choice of ranges Measurement models for gauge pressure, differential pressure, dual range, absolute pressure and vacuum Product description: A range of 48 pressure modules can perform pressure calibrations from 0 to 1 in water up to 10,000 psi (2.5 mBar to 690 bar). You can find the range of this particular pressure module above under "Scope of delivery". Overpressure modules have one pressure connection and measure pressure relative to atmospheric pressure. Differential pressure modules have two pressure connections and measure the difference between the pressure applied to the high fitting compared to the low fitting. Each module is clearly marked in terms of range, gauge pressure and media compatibility. All modules have NPT, metric (BSP) and M20 adapters. Compatible with all documenting, multifunction and pressure calibrators (including the calibrators: Fluke 754, 752, 726, 725, 721, 719Pro, 719, 717 and the older 741, 743, 744, 701 and 702). Quick and easy measurement Fluke 750P series pressure modules are easy to use. If you want to measure pressure, connect the pressure module to a pressure source or hand pump, then connect the pressure module cable to the calibrator. Apply pressure to the pressure source and this pressure is digitally displayed on the calibrator. With one press of the head, you can display the pressure in 11 different engineering units. When using 750-series documenting process calibrators, pressure measurements can be date-time-stamped and stored electronically for later use. This saves time, reduces errors and supports compliance with quality standards and regulations. ds: dsc: Scope of delivery Pressure module, -12 psi to 100 psi (-0.8 to 7 bar), (-80 to 700 kPa) Adapter from 1/8 NPT male to 1/4 NPT male Adapter from 1/8 NPT male to 1/4 BSP male Adapter from 1/8 NPT male to M20 male Calibration certificate Manual kts: pressure module (-1 - 7 bar) kpn: 750RD6 kpn_dash: kpn_clear: 750RD6 bkpn: FLUKE 750RD6 bkpn_clear: FLUKE 750RD6 c_path: Home / Tools / Measuring and inspection technique / Accessories and spare parts / Pressure module | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke accessories and spare parts / Fluke pressure module sr_no_br_cl_ns: 4352714 sr_ns: FLUKE4352714
