r: 03395576 p: 141.38 pid: 179420 b: FLUKE q: 0 st: lt: 10 ean: 0095969620208 sr: FLUKE 5065894 sr_no_br: 5065894 sr_no_br_cl: 5065894 sr_cl: FLUKE5065894 sr_dash: sold: 706.9 p_range: none type: standard act: 1 avo: 1 av: Min. temperature -30 °C Max. temperature 500 °C Optical ratio 10:1 Power supply 1 x AA Accuracy ± 1,5 °C n: FLUKE 62 MAX infrared thermometer with 1 laser dot - 5065894 cn: TEMPERATURE GUN cn2: TEMPERATURE GUN cn_clear: TEMPERATUREGUN d: Product description Instantly measures the temperature of equipment in hard-to-reach or hazardous areas Dust and waterproof: conforms to protection class IP54 and is therefore dust- and waterproof. Robust: tested to withstand a 3-metre drop Ergonomically designed: completely redesigned for an even more comfortable hand position. Small and lightweight; can be attached to your tool belt or a carry strap and fits easily into your toolbox. Key features Distance to measurement surface: precise laser technology ensures more accurate and reproducible measurements. Large, easy-to-read backlit display: the large screen makes data easier to read, even in dark environments. Min/Max/Avg/Dif: shows the minimum, maximum or average temperature or the difference between two readings. Alarm: Alarms Hi and Lo for too high and too low values indicate when readings fall outside the limits. Powered by a single standard AA battery. ds: dsc: kts: infrared thermometer with 1 laser dot kpn: 62 MAX kpn_dash: kpn_clear: 62MAX bkpn: FLUKE 62 MAX bkpn_clear: FLUKE 62MAX c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Temperature gun | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke temperature gun sr_no_br_cl_ns: 5065894 sr_ns: FLUKE5065894
r: 03045039 p: 639.892 pid: 72946 b: FLUKE q: 0 st: lt: 8 ean: 0095969493802 sr: FLUKE 3448783 sr_no_br: 3448783 sr_no_br_cl: 3448783 sr_cl: FLUKE3448783 sr_dash: sold: 639.892 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature Yes Digital Yes Battery size 9V Low battery message Yes Automatic shut-off Yes With current clamp No Diode test Yes Max. current AC/DC 10 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 10000 µF Max. frequency 200 kHz Max. resistance 50 MOhm n: FLUKE 87V/IMSK service combination set industrial multimeter - 3448783 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product Description Fluke-87V multimeter features True-RMS accuracy and advanced features for desired results The Fluke-i400 AC 400A current clamp turns the 87V into a current meter Includes special accessories such as temperature measuring probe, test leads and crocodile clips This combination set was created based on the Fluke 87V, the world's most widely used industrial digital multimeter, combined with the i400 AC current clamp. Together, they provide the resolution and accuracy to efficiently troubleshoot any electrical system. The set includes special accessories that allow you to be even more productive and brings savings of more than 15% compared to the individual prices of all accessories. Plus, you'll be working with the most trusted tools in the world. The Fluke-87V multimeter features True-RMS accuracy and advanced features for the results you want True-RMS accuracy with manual and automatic range setting, display hold, auto hold and min/max recording Efficiently troubleshoot motor drives, factory automation, power distribution and electromechanical equipment, even in high noise, high current and altitude locations. A low-pass filter supports accurate frequency measurements on VFDs and records ultra-short interruptions of up to 250 µs. Lifetime warranty by a brand you trust. The Fluke-i400 AC 400A current clamp turns the 87V into a current meter Current clamp provides accurate current measurements up to 400A AC without interrupting electrical circuits Enables safe measurement according to industry safety standards. Special accessories such as temperature measuring probe, measuring leads and crocodile clips The 80BK-A DMM temperature measuring probe can be connected to the voltage terminals of the 87V, allowing temperature measurements from -40 °C to 260 °C (-40 °F to 500 °F). TL75 measurement leads and AC175 crocodile clips complete this versatile set. Main safety features The meter's safety specification CAT III 1000 V, CAT IV 600 V ensures that you can do your job safely. Resistant to spikes of over 8000 V. Input Alert gives an audible warning if inputs are misused. ds: dsc: Scope of delivery Fluke 87V industrial multimeter Fluke i400 400 A AC current clamp 80BK-A DMM temperature measuring probe TL75 Hard Point measuring lead set AC175 Alligator clip set with screw thread kts: service combination set industrial multimeter kpn: 87V/IMSK kpn_dash: kpn_clear: 87VIMSK bkpn: FLUKE 87V/IMSK bkpn_clear: FLUKE 87VIMSK c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 3448783 sr_ns: FLUKE3448783
r: 03388755 p: 119.178 pid: 178052 b: FLUKE q: 0 st: lt: 4 ean: 0095969624213 sr: FLUKE 6101428 sr_no_br: 6101428 sr_no_br_cl: 6101428 sr_cl: FLUKE6101428 sr_dash: sold: 595.89 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 600 V Measurement temperature No Digital Yes Battery size AAA Low battery message Yes Automatic shut-off Yes With current clamp Yes Diode test No Max. current AC/DC 400 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity No Measurement frequency No Measurement resistance No Current measurement Yes Measurement voltage Yes n: FLUKE 302+ digital current clamp - 6101428 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description Compact digital current clamp, flexible and easy to use For everyday applications where True RMS accuracy is not required Small enough to fit in a work bag, robust enough to withstand daily use Measures alternating current up to 400 A Large 30 mm jaw High accuracy of 1.8% Illuminated display Recommended for universal measurements Safety specification CAT II 1000 V, 10 A CAT IV 600 V, CAT III 1000 V only with protective cover Meets safety specification CAT IV 300 V/CAT III 600 V Two-year warranty ds: dsc: Scope of delivery TL75 Hard Point measuring lead set 1.22m with PVC insulation and angled insulated banana plugs kts: digital current clamp kpn: 302+ kpn_dash: kpn_clear: 302 bkpn: FLUKE 302+ bkpn_clear: FLUKE 302 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 6101428 sr_ns: FLUKE6101428
r: 02951010 p: 548.983 pid: 71951 b: FLUKE q: 0 st: lt: 8 ean: 0095969586726 sr: FLUKE 3947847 sr_no_br: 3947847 sr_no_br_cl: 3947847 sr_cl: FLUKE3947847 sr_dash: sold: 548.983 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 1000 V Measurement temperature No Digital Yes Battery size 9V Low battery message Yes Automatic shut-off Yes With current clamp No Diode test Yes Max. current AC/DC 10 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 10000 µF Max. frequency 200 kHz Max. resistance 50 MOhm n: FLUKE 83 V digital multimeter for industrial use - 3947847 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description: Accuracy and diagnostic features for optimum industrial productivity The new Fluke 83 V has enhanced measurement and troubleshooting functions, higher resolution and greater accuracy for troubleshooting even more faults in motor drives, business automation, power distribution devices and electromechanical equipment. The 80 Series V shares many similarities with the classic 80 Series, but offers more troubleshooting capabilities, even greater safety, even more ease of use and better protection against impacts. The new 80 Series V has been independently tested and complies with the 2nd edition of ANSI/ISA S82.01 and EN61010-1 CAT IV 600 V/CAT III 1000 V. The instruments can withstand impulses in excess of 8,000 V and reduce the risks posed by power surges and spikes. Key features Optional magnetic hanging clip for easy installation and reading while leaving your hands free for other tasks. With its large-digit display and bright backlight with two levels of illumination, the 80 Series V is significantly easier to read than older models. Electrical safety All inputs are protected in accordance with the 2nd edition of ANSI/ISA S82.01 and EN61010-1 CAT IV 600 V and CAT III, 1000 V. The instruments can withstand impulses in excess of 8,000 V and reduce the risks associated with power surges and spikes. ds: dsc: Scope of delivery TL75 measuring leads AC175 crocodile clips Holster 9 V battery (fitted) kts: digital multimeter for industrial use kpn: 83 V kpn_dash: kpn_clear: 83V bkpn: FLUKE 83 V bkpn_clear: FLUKE 83V c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 3947847 sr_ns: FLUKE3947847
r: 08106973 p: 523.694 pid: 158654 b: FLUKE q: 0 st: lt: 8 ean: 0095969973960 sr: FLUKE 5195045 sr_no_br: 5195045 sr_no_br_cl: 5195045 sr_cl: FLUKE5195045 sr_dash: sold: 523.694 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 600 V Measurement temperature No Digital Yes Battery size 9V Low battery message Yes Automatic shut-off Yes With current clamp No Diode test Yes Max. current AC/DC 10 A Measurement Lo-Z Yes Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 10000 µF Max. frequency 100 kHz Max. resistance 40 MOhm n: FLUKE IB117K/EUR digital multimeter 117 + VDE hand tool set 8-piece in roll-up carrying case - 5195045 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description Designed by electricians. Manufactured by Fluke Compact True-rms meter for commercial applications. The Fluke 117 is the ideal meter for high-demand buildings such as commercial buildings, hospitals and schools. The 117 has a non-contact voltage detection feature for faster work. Key features VoltAlert technology for non-contact voltage detection AutoVolt automatic selection of AC/DC voltage Low input impedance: helps prevent erroneous readings due to phantom voltage Large display with white LED backlight for use in dimly lit environments True-rms for accurate measurements at non-linear loads Measures 20 A (momentary up to 30 seconds, 10 A continuous) Resistance, continuity, frequency and capacitance Provides Min/Max/Average for recording signal fluctuations Compact ergonomic design for one-handed operation. Suitable for the optional magnetic suspension system (ToolPak) for hands-free use Safety specification CAT III 600 V ds: dsc: Scope of delivery 117 multimeter for electricians ISLS3 insulated slotted screwdriver 3/32, 3" ISLS5 insulated slotted screwdriver 5/32, 4" ISLS8 insulated slotted screwdriver 1/4, 5" IPHS1 insulated Philips screwdriver #1, 3" IPHS2 insulated Philips screwdriver no. 2, 4" INLP8 insulated tip pliers with side cutting edge and gripping zones INDC8 insulated high leverage side cutters in heavy-duty design INCP8 heavy-duty insulated combination pliers RUP8 roll-up carrying case kts: digital multimeter 117 + VDE hand tool set 8-piece in roll-up carrying case kpn: IB117K/EUR kpn_dash: kpn_clear: IB117KEUR bkpn: FLUKE IB117K/EUR bkpn_clear: FLUKE IB117KEUR c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 5195045 sr_ns: FLUKE5195045
r: 03388507 p: 152.236 pid: 178051 b: FLUKE q: 0 st: lt: 10 ean: 0195112151549 sr: FLUKE 6101437 sr_no_br: 6101437 sr_no_br_cl: 6101437 sr_cl: FLUKE6101437 sr_dash: sold: 456.708 p_range: none type: standard act: 1 avo: 1 av: Max. voltage AC/DC 600 V Measurement temperature No Digital Yes Battery size AAA Low battery message Yes Automatic shut-off Yes With current clamp No Diode test Yes Max. current AC/DC 10 A Measurement Lo-Z No Continuity test Yes Measurement of noise No Measurement of electrical capacity Yes Measurement frequency Yes Measurement resistance Yes Current measurement Yes Measurement voltage Yes Max. electrical capacity 1000 µF Max. frequency 100 kHz Max. resistance 40 MOhm n: FLUKE 107 digital pocket multimeter - 6101437 cn: MULTIMETER cn2: MULTIMETER cn_clear: MULTIMETER d: Product description Compact, easy-to-use palm-sized digital multimeter Small enough to fit in a breast pocket, but rugged enough to withstand daily use, including a 1 metre drop test For everyday applications where True RMS accuracy is not required Comfortable grip, weighs only 200 g and is easy to carry Safety specification CAT III 600 V Current and voltage measurements Measures resistance and continuity to check for broken wires Data Hold and backlit display for safe and fast operation Key functions AC and DC voltage Alternating and direct current Resistance Capacitance Diode Frequency and duty cycle ds: dsc: Scope of delivery 107 palm-sized digital multimeter 1 pair TL75 measuring leads 2 AAA alkaline batteries SmartStrap intelligent magnetic, multifunctional carrying strap kts: digital pocket multimeter kpn: 107 kpn_dash: kpn_clear: 107 bkpn: FLUKE 107 bkpn_clear: FLUKE 107 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Multimeter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke multimeter sr_no_br_cl_ns: 6101437 sr_ns: FLUKE6101437
r: 08107003 p: 354.502 pid: 166180 b: FLUKE q: 0 st: lt: 7 ean: 0095969786652 sr: FLUKE 4637005 sr_no_br: 4637005 sr_no_br_cl: 4637005 sr_cl: FLUKE4637005 sr_dash: sold: 354.502 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE T150/PRV240 voltage and continuity tester + electrical tester - 4637005 cn: VOLTAGE TESTER cn2: VOLTAGE TESTER cn_clear: VOLTAGETESTER d: Product description T150 Two-pole voltage and continuity tester With large, easy-to-use keys, a bright backlight and clear audible and tactile indicators designed for any work situation Resistance measurements up to 1999 Ohm Display Hold (frozen display) Improved ergonomic design for easy use (even with gloves on) and with a quick, safe cap for the measuring pins Product description PRV240 Reduces the risk of shock and arcing by checking measuring instruments for performance without entering a potentially hazardous electrical environment Generates both stationary AC and DC voltage - generates 240 V DC/AC Compatible with both high and low impedance multimeters as well as current clamps and electrical testers ds: dsc: Scope of delivery T150 voltage and continuity tester with illuminated LCD and additional resistance measurement PRV240 electrical tester TPAK magnetic suspension strap kts: voltage and continuity tester + electrical tester kpn: T150/PRV240 kpn_dash: kpn_clear: T150PRV240 bkpn: FLUKE T150/PRV240 bkpn_clear: FLUKE T150PRV240 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Voltage tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke voltage tester sr_no_br_cl_ns: 4637005 sr_ns: FLUKE4637005
r: 02958394 p: 172.897 pid: 72237 b: FLUKE q: 0 st: lt: 10 ean: 0095969723572 sr: FLUKE 4459442 sr_no_br: 4459442 sr_no_br_cl: 4459442 sr_cl: FLUKE4459442 sr_dash: sold: 345.794 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE FLK-a3002 FC Wireless AC/DC power module - 4459442 cn: VOLTAGE TESTER cn2: VOLTAGE TESTER cn_clear: VOLTAGETESTER d: Key features: The Fluke a3002 FC wireless AC/DC current clamp module is designed for use with the i410 or i1010 AC/DC current clamps (not included with this module). The a3002 FC AC/DC current module wirelessly transmits readings to other Fluke Connect-enabled main units, as shown below: Fluke 3000 FC DMM Fluke Ti200/300/400 thermal imager PC via optional pc3000 FC adapter Fluke Connect Mobile App Some of the Key Features: of the Fluke a3002 FC: Measurement up to 400 A AC or 400 A DC with the i410 (sold separately) Measurement up to 600 A AC or 1000 A DC with the i1010 (sold separately) Use as a stand-alone meter or as part of the system Log function to record and store up to 65,000 measured values Product description: All the facts, right on site. The Fluke A3002 FC wireless AC power module is part of a series of wireless measurement tools that allow you to share data using the Fluke Connect app with ShareLive video call function. Fluke Connect wireless measuring instruments ensure that instruments and not your body are near live electrical distributors. It's simple. Connect the A3002 FC current module, or one of the other Fluke Connect remote modules, and read results at a safe distance on the Fluke Connect wireless multimeter or a portable computer. The Fluke Connect measuring instruments can send measurement data to your smartphone, so you can store readings on it and share them with your team on site, anytime, anywhere. Detect intermittent electrical faults without getting stuck Timing is all-important when trying to detect an intermittent problem, and the hard part is that the problem doesn't always occur when you have connected your meter. We've solved that problem with Fluke Connect - leave your remote modules plugged in to log readings and leave the site to tackle other problems. You can then download the data for further analysis. Work safely near electrical distributors with less personal protective equipment Personal protective equipment can save your life, but they are bulky, hot and difficult to work in. With Fluke Connect, there is no need to work in front of live open distribution panels or moving/hazardous machinery. Imagine having access to live readings without being exposed to the live distribution panel. It is simple. Simply de-energise the electrical cabinet, open the distribution panel while wearing personal protective equipment and connect one or more A3002 FC modules. Close the cabinet, turn the power back on and let the Fluke Connect system do its job, while reducing the risk of arc discharge by staying away from dangerous measurement situations. Faster and cheaper 3-phase testing If your electrical cabinet is de-energised, attach a Fluke Connect current clamp to each phase. Close the cabinet, switch the power back on and read the measured values. What previously took hours in total and required expensive equipment can be done in minutes with an affordable Fluke Connect wireless system. Perform 3-phase measurements in 1/3 the time. Add your laptop and go from logging immediately to analysis and diagnosis. You can solve problems faster by seeing live measurements from multiple measurement points on a single screen. With the A3002 FC current modules, the following is possible: Make 3-phase measurements in 1/3 the time of previous methods. Send data to your laptop and move immediately from logging to analysis and diagnosis. Log data over an extended period of time to monitor hourly, shift or week-long changes in circuit load. Using the Fluke Connect wireless USB adapter to collect logged data from remote modules by walking past an operating module and downloading logged data. Perform analyses with your PC and share results using Fluke Cloud storage and the ShareLive video call function. View data or graphs to get input from team members. ds: dsc: Scope of delivery True-RMS AC/DC power module Magnetic suspension strap kts: Wireless AC/DC power module kpn: FLK-a3002 FC kpn_dash: FLK kpn_clear: FLKa3002FC bkpn: FLUKE FLK-a3002 FC bkpn_clear: FLUKE FLKa3002FC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Voltage tester | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke voltage tester sr_no_br_cl_ns: 4459442 sr_ns: FLUKE4459442
r: 02909141 p: 267.938 pid: 73186 b: FLUKE q: 0 st: lt: 10 ean: 0095969692045 sr: FLUKE 4401588 sr_no_br: 4401588 sr_no_br_cl: 4401588 sr_cl: FLUKE4401588 sr_dash: sold: 267.938 p_range: none type: standard act: 1 avo: 1 av: Max. current AC/DC 400 A n: FLUKE A3000 FC wireless AC current clamp module - 4401588 cn: CLAMP METER cn2: CLAMP METER cn_clear: CLAMPMETER d: Product description: The Fluke a3000 FC wireless AC current clamp module is a fully functional True-RMS current clamp that wirelessly transmits readings to other Fluke Connect-enabled main units, as shown below: Fluke 3000 FC DMM Fluke Ti200/300/400 infrared camera PC via optional pc3000 FC adapter Fluke Connect Mobile App The Fluke a3000 FC wireless AC current clamp module has all the necessary functions and features for easy troubleshooting when testing and measuring: True-RMS AC current clamp Measurement of up to 400 A AC Use as a stand-alone meter or as part of the system Log function for recording and storing up to 65,000 measured values Inrush current function Product description: Viewing. Saving. Sharing. All the facts, right on site. The Fluke a3000 FC wireless AC current clamp module is part of a series of wireless measurement tools that allow you to share data using the Fluke Connect app with ShareLive video call function. Fluke Connect wireless measuring instruments ensure that instruments and not your body are near live electrical dividers. It's simple. Connect the a3000 FC current clamp module, or any of the other Fluke Connect remote modules, and read results at a safe distance on the Fluke Connect wireless multimeter or a portable computer. The Fluke Connect measuring instruments can send measurement data to your smartphone, so you can store readings on it and share them with your team on site, anytime, anywhere. Detect intermittent electrical faults without getting stuck Timing is all-important when you are trying to detect an intermittent problem, and the hard part is that the problem doesn't always occur when you have connected your meter. We've solved that problem with Fluke Connect - leave your remote modules plugged in to log readings and leave the site to tackle other problems. You can then download the data for further analysis. Work safely near electrical distributors with less personal protective equipment Personal protective equipment can save your life, but they are bulky, hot and difficult to work in. With Fluke Connect, there is no need to work in front of live open distribution panels or moving/hazardous machinery. Imagine having access to live readings without being exposed to the live distribution panel. It is simple. Simply de-energise the electrical cabinet, open the distribution panel while wearing personal protective equipment and connect one or more a3000 FC modules. Close the cabinet, turn the power back on and let the Fluke Connect system do its job, while reducing the risk of arc discharge by staying away from dangerous measurement situations. Faster and cheaper 3-phase testing If your electrical cabinet is de-energised, attach a Fluke Connect current clamp to each phase. Close the cabinet, re-energise and read the readings. What previously took hours in total and required expensive equipment can be done in minutes with an affordable Fluke Connect wireless system. Take 3-phase measurements in 1/3 the time. Add your laptop and go from logging straight to analysis and diagnostics. You can solve problems faster by seeing live readings from multiple measurement points on a single screen. With the a3000 FC current clamp modules, the following is possible: Take 3-phase measurements in 1/3 the time of previous methods. Send data to your laptop and move immediately from logging to analysis and diagnosis. Log data over an extended period of time to monitor hourly, shift or week-long changes in circuit loads. Using the Fluke Connect wireless USB adapter to collect logged data from remote modules by walking past an operating module and downloading logged data. Perform analyses with your PC and share results using Fluke Cloud storage and the ShareLive video call function. View data or graphs to get input from team members. ds: dsc: kts: wireless AC current clamp module kpn: A3000 FC kpn_dash: kpn_clear: A3000FC bkpn: FLUKE A3000 FC bkpn_clear: FLUKE A3000FC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Clamp meter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke clamp meter sr_no_br_cl_ns: 4401588 sr_ns: FLUKE4401588
r: 08106940 p: 29713.664 pid: 166159 b: FLUKE q: 0 st: lt: 8 ean: 0095969348249 sr: FLUKE 2637634 sr_no_br: 2637634 sr_no_br_cl: 2637634 sr_cl: FLUKE2637634 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1760 TR INTL three-phase power quality recorder, topas - 2637634 cn: POWER QUALITY ANALYSER cn2: POWER QUALITY ANALYSER cn_clear: POWERQUALITYANALYSER d: Product description Fully Class A compliant: perform tests in accordance with the strict international standard IEC 61000-4-30 Class A GPS time synchronisation: Accurately correlate data with events or data sets from other instruments Flexible and fully configurable thresholds and scaling factors: Allows the user to pinpoint specific problems by defining very detailed fault detection and recording criteria. Uninterrupted power supply (40 minutes): Never miss important events - additionally records the beginning and end of interruptions to identify the cause Registration waveforms of 10 MHz, 6000 Vpk: Delivers a detailed image of even the shortest event 2 GB data memory: Detailed, simultaneous recording of multiple power parameters for long periods of time Includes comprehensive software: Provides trend graphs to analyse the actual cause, and for statistical summaries, reporting and real-time data monitoring when used online Connect and ready: Quick to install with automatic sensor detection. The sensors are powered by the instrument. So you do not need batteries. Robust design for the field: insulated housing and a solid-state design without rotating components allow reliable testing in almost all conditions ds: dsc: Scope of delivery Internal Flash memory 2 GB PQ Analyze software on CD-ROM Ethernet cable for network connection (1) Crosslink Ethernet cable for direct connection to PC (1) Power supply cable (1) Operating manuals Carrying case Fast transient analysis up to 10 MHz kts: three-phase power quality recorder, topas kpn: 1760 TR INTL kpn_dash: kpn_clear: 1760TRINTL bkpn: FLUKE 1760 TR INTL bkpn_clear: FLUKE 1760TRINTL c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Power quality analyser | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke power quality analyser sr_no_br_cl_ns: 2637634 sr_ns: FLUKE2637634
r: 08106941 p: 23774.49 pid: 74194 b: FLUKE q: 0 st: lt: 8 ean: 0095969348232 sr: FLUKE 2637629 sr_no_br: 2637629 sr_no_br_cl: 2637629 sr_cl: FLUKE2637629 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1760TR Basic Topas three-phase power quality recorder with 8 input channels - 2637629 cn: POWER QUALITY ANALYSER cn2: POWER QUALITY ANALYSER cn_clear: POWERQUALITYANALYSER d: Product description Fully Class A compliant: perform tests in accordance with the strict international standard IEC 61000-4-30 Class A GPS time synchronisation: Accurately correlate data with events or data sets from other instruments Flexible and fully configurable thresholds and scaling factors: Allows the user to pinpoint specific problems by defining very detailed fault detection and recording criteria. Uninterrupted power supply (40 minutes): Never miss important events - additionally records the beginning and end of interruptions to identify the cause Registration waveforms of 10 MHz, 6000 Vpk: Delivers a detailed image of even the shortest event 2 GB data memory: Detailed, simultaneous recording of multiple power parameters for long periods of time Includes comprehensive software: Provides trend graphs to analyse the actual cause, and for statistical summaries, reporting and real-time data monitoring when used online Connect and ready: Quick to install with automatic sensor detection. The sensors are powered by the instrument. So you do not need batteries. Robust field design: Insulated housing and a solid-state design without rotating components allow reliable testing in almost all conditions Meets Class A requirements for the most demanding mains power test The Fluke 1760 three-phase Power Quality Recorder is fully compliant with IEC 61000-4-30 Class A, for advanced power quality analysis and consistent compliance testing. Designed for analysis of utility and industrial power distribution systems, in medium- and high-voltage networks, this power quality tester offers the flexibility to customise thresholds, algorithms and measurement settings. The Fluke 1760 power quality recorder records the most comprehensive details on user-selected parameters. Applications Comprehensive fault analysis - Perform rapid transient analysis and determine the actual cause of equipment failures, to prevent them in the future and for predictive maintenance. Fast transient analysis with a measurement range of6000 V allows recording of very short impulses, e.g. lightning strikes. Class A service quality compliance - Validating incoming mains power quality at the service input. Because the Fluke 1760 is Class A compliant, verification results are absolutely reliable. Correlate events at multiple locations - Using GPS time synchronisation, users can quickly determine where a fault first occurred, inside or outside the plant. Galvanic isolation and DC coupling - Allows complete measurements to be made on disparate power systems. For example, locating problems in UPS systems by simultaneously measuring battery voltage and delivered power. Assess mains power quality and power loads - Assess basic mains power quality to validate compatibility with critical systems before installation, and check electrical system capacity before adding loads. ds: dsc: Scope of delivery Internal Flash memory 2 GB PQ Analyze software on CD-ROM Ethernet cable for network connection (1) Crosslink Ethernet cable for direct connection to PC (1) Power supply cable (1) Operating manuals Carrying case Fast transient analysis up to 10 MHz kts: Topas three-phase power quality recorder with 8 input channels kpn: 1760TR Basic kpn_dash: kpn_clear: 1760TRBasic bkpn: FLUKE 1760TR Basic bkpn_clear: FLUKE 1760TRBasic c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Power quality analyser | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke power quality analyser sr_no_br_cl_ns: 2637629 sr_ns: FLUKE2637629
r: 08106939 p: 17349.49 pid: 74192 b: FLUKE q: 0 st: lt: 8 ean: 0095969346092 sr: FLUKE 2630732 sr_no_br: 2630732 sr_no_br_cl: 2630732 sr_cl: FLUKE2630732 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1760 Basic three-phase Power Quality Recorder with 8 input channels - 2630732 cn: POWER QUALITY ANALYSER cn2: POWER QUALITY ANALYSER cn_clear: POWERQUALITYANALYSER d: Product description Fully Class A compliant: perform tests in accordance with the strict international standard IEC 61000-4-30 Class A GPS time synchronisation: Accurately correlate data with events or data sets from other instruments Flexible and fully configurable thresholds and scale factors: Allows the user to pinpoint specific problems by defining very detailed fault detection and recording criteria. Uninterrupted power supply (40 minutes): Never miss important events - additionally records the beginning and end of interruptions to identify the cause Registration waveforms of 10 MHz, 6000 Vpk: Delivers a detailed image of even the shortest event 2 GB data memory: Detailed, simultaneous recording of multiple power parameters for long periods of time Includes comprehensive software: Provides trend graphs to analyse the actual cause, and for statistical summaries, reporting and real-time data monitoring when used online Connect and ready: Quick to install with automatic sensor detection. The sensors are powered by the instrument. So you do not need batteries. Robust field design: Insulated housing and a solid-state design without rotating components allow reliable testing in almost all conditions Meets Class A requirements for the most demanding mains power test The Fluke 1760 three-phase Power Quality Recorder is fully compliant with IEC 61000-4-30 Class A, for advanced power quality analysis and consistent compliance testing. Designed for analysis of utility and industrial power distribution systems, in medium- and high-voltage networks, this power quality tester offers the flexibility to customise thresholds, algorithms and measurement settings. The Fluke 1760 power quality recorder records the most comprehensive details on user-selected parameters. Applications Comprehensive fault analysis - Perform rapid transient analysis and determine the actual cause of equipment failures, to prevent them in the future and for predictive maintenance. Fast transient analysis with a measurement range of6000 V allows recording of very short impulses, e.g. lightning strikes. Class A service quality compliance - Validating incoming mains power quality at the service input. Because the Fluke 1760 is Class A compliant, verification results are absolutely reliable. Correlate events at multiple locations - Using GPS time synchronisation, users can quickly determine where a fault first occurred, inside or outside the plant. Galvanic isolation and DC coupling - Allows complete measurements to be made on disparate power systems. For example, locating problems in UPS systems by simultaneously measuring battery voltage and delivered power. Assess mains power quality and power loads - Assess basic mains power quality to validate compatibility with critical systems before installation, and check electrical system capacity before adding loads. ds: dsc: Scope of delivery Internal Flash memory 2 GB PQ Analyze software on CD-ROM Ethernet cable for network connection (1) Crosslink Ethernet cable for direct connection to PC (1) Power supply cable (1) Operating manuals Carrying case kts: three-phase Power Quality Recorder with 8 input channels kpn: 1760 Basic kpn_dash: kpn_clear: 1760Basic bkpn: FLUKE 1760 Basic bkpn_clear: FLUKE 1760Basic c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Power quality analyser | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke power quality analyser sr_no_br_cl_ns: 2630732 sr_ns: FLUKE2630732
r: 08121734 p: 16208.099 pid: 166256 b: FLUKE q: 0 st: lt: 8 ean: 0195112123652 sr: FLUKE 5596830 sr_no_br: 5596830 sr_no_br_cl: 5596830 sr_cl: FLUKE5596830 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 1777/FPC three-phase power quality analyser with 3 years Premium Care in roller case - 5596830 cn: POWER QUALITY ANALYSER cn2: POWER QUALITY ANALYSER cn_clear: POWERQUALITYANALYSER d: Product description Automatically measures parameters for power and power quality Mains power quality status at a glance for faster fault finding Easily display data on V/A/Hz, power, drops, rises and harmonics Record fast transients of up to 8 kV Power supply directly from measurement circuit without a power cord ds: dsc: Scope of delivery 1777 Power Quality Analyzer I17XX-FLEX1500 24 iFLEX 1500A 24 IN (2.0 M) current clamps 17XX voltage measuring lead with flat cable 3-phase+N AC285 black alligator clip AC285 green alligator clip Black 1m USB-C cable Power cord FLK-17XX-TL 0.18M measuring lead set Green measuring lead MP1-3R/1B magnetic probe set 174X-HANGER magnetic suspension kit 177X-4204 WIFI/BLE module Cable marking kit (for voltage and current) 174X-MA-C8 wall outlet adapter 1777 HARDCASE rolling case kts: three-phase power quality analyser with 3 years Premium Care in roller case kpn: 1777/FPC kpn_dash: kpn_clear: 1777FPC bkpn: FLUKE 1777/FPC bkpn_clear: FLUKE 1777FPC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Power quality analyser | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke power quality analyser sr_no_br_cl_ns: 5596830 sr_ns: FLUKE5596830
r: 08122534 p: 15973.884 pid: 166247 b: FLUKE q: 0 st: lt: 8 ean: 0195112030912 sr: FLUKE 5300483 sr_no_br: 5300483 sr_no_br_cl: 5300483 sr_cl: FLUKE5300483 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Max. pressure 69 bar n: FLUKE 729 PRO 7M automatic pressure calibrator (-0.9 to 70 bar) - 5300483 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description Automatic pressure build-up and control up to 1000 psi Interchangeable pressure control modules Reaches high pressure set points quickly, so you get more done Built-in test template, easy one-button documented calibration HART communication Pressure leakage tests Automatic pressure fine-tuning, automatic pressure stabilisation Powerful Li-ion battery Extended measuring range with 750P series pressure modules Temperature measurements with 720RTD thermocouple Bright two/three colour graphical display Robust and portable design with 3-year warranty as standard ds: dsc: Scope of delivery Automatic pressure calibrator 729 Pro AC-DC converter Power cord Rechargeable Li-ion battery Tape measure lead set AC280 Sure Grip Hook Set (red and black) Alligator clips (red and black) One set of TP220 measuring pens (red and black) USB communication cable: Type-A for PC to mini-B for the device (1 m) Flexible hose (diameter 2 mm, length 1.5 m) Fitting: 1/8" NPT female thread x 1/4" NPT female thread Fitting: 1/8" NPT male thread x 1/4" NPT male thread 13 Fitting: 1/8 inch NPT female x M20 female thread 14 Fitting: 1/4 inch BSP female thread x 1/8 inch NPT female thread PTFE tape Pressure measuring module (PMM) Hose for draining condensed water generated in the product. Diameter 1/8 inch, length 0.3 m Adjustable strap with quick connector for hanging the product Safety information Traceable calibration report with data kts: automatic pressure calibrator (-0.9 to 70 bar) kpn: 729 PRO 7M kpn_dash: kpn_clear: 729PRO7M bkpn: FLUKE 729 PRO 7M bkpn_clear: FLUKE 729PRO7M c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 5300483 sr_ns: FLUKE5300483
r: 08106993 p: 15582.479 pid: 158663 b: FLUKE q: 0 st: lt: 8 ean: 0195112123997 sr: FLUKE 5600010 sr_no_br: 5600010 sr_no_br_cl: 5600010 sr_cl: FLUKE5600010 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE PVA-1500HE2 Solmetric PV Analyser HR IV Curve Tracer - 5600010 cn: SOLAR ENERGY METER cn2: SOLAR ENERGY METER cn_clear: SOLARENERGYMETER d: Product description Measures and displays I-V curves up to 1500 V and 30 A, also on high-efficiency modules Advanced built-in PV model provides instant monitoring of PV performance Sweep-to-sweep delay of 9 seconds to measure 3.5 MW within 1 hour Uninterrupted measurements even in hot environments Automates data management, analysis and reporting Database of more than 70,000 modules with automatic updates Wireless interfaces for faster installation, safer working environment and freedom of movement during PV troubleshooting Ready for on-site firmware update ds: dsc: Scope of delivery PVA-1500 V device SolSensor and current clamp Measurement cable with alligator clips MC4 disconnector Chargers 2x thermocouples and self-adhesive discs Cleaning agent for sensor Transport case (included with the PVA-1500HE2) Available for free download: PVA application and data analysis tool kts: Solmetric PV Analyser HR IV Curve Tracer kpn: PVA-1500HE2 kpn_dash: PVA kpn_clear: PVA1500HE2 bkpn: FLUKE PVA-1500HE2 bkpn_clear: FLUKE PVA1500HE2 c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Solar energy meter | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke solar energy meter sr_no_br_cl_ns: 5600010 sr_ns: FLUKE5600010
r: 02951958 p: 14790.14 pid: 72701 b: FLUKE q: 0 st: lt: 8 ean: 0095969840323 sr: FLUKE 4856894 sr_no_br: 4856894 sr_no_br_cl: 4856894 sr_cl: FLUKE4856894 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 729 150G FC automatic pressure calibrator (10 bar) - 4856894 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: The Fluke 729 automatic pressure calibrator was designed specifically with process engineers in mind. This pressure calibrator simplifies the pressure calibration process and provides faster, more accurate test results. Technicians know that calibrating pressure can be a time-consuming task, but the 729 makes it easier than ever: with an electric pump that automatically builds and regulates pressure in one easy-to-use, rugged, portable package. The 729 is the ideal portable pressure calibrator, on which you simply type in a desired pressure value after which the calibrator automatically pumps until the desired set point is reached. Then the internal fine adjustment automatically stabilises the pressure to the requested value. The Fluke 729 can also automatically test multiple pressure measurement points and automatically document the results. Calibration is as simple as typing in the initial and final pressure, the number of measurement points and the tolerance level. The 729 does the rest. Built-in HART communication capabilities allow adjustment of mA settings of HART transmitters, light HART configurations and tuning to applied 0% and 100% values. Upload and manage documented calibration results with the DPCTrack2 calibration management software, making it easy to manage your instruments, create scheduled checks and reports, and manage calibration data. With a choice of three ranges, namely 30 psi (2 bar, 200 kPa), 150 psi (10 bar, 1 MPa) and 300 psi (20 bar, 2 MPa), the Fluke 729 automatic pressure calibrators are designed to perform when and where you need them. Key features: Automatic pressure build-up and control up to 300 psi Easy process documentation with built-in test templates Automatic internal pressure fine-tuning Measure, generate and simulate signals from 4 to 20 mA 24V loop power supply for powering transmitters for tests Clear two/three-channel colour graphic display HART communication for testing smart HART transmitters Built-in leak test for checking test fixtures for leakage Rugged portable design with standard 3-year warranty Compatibility with the Fluke Connect app Temperature measurements with optional 720RTD thermocouple V DC measurement for testing transmitters with outputs from 1 V DC to 5 V DC Compatible with 700-series and 750-series pressure modules Uploading of documented test results to DPCTrack2 calibration management software Innovative semi-rigid carrying case specially designed for on-site work Automatic pressure generation and control up to 300 psi (20 bar, 2MPa) Enter a pressure and the 729 automatically pumps until the desired pressure is reached. Enter a test template and the 729 will automatically pump and document a multi-point pressure calibration test. Easy documentation of calibration using defined templates for transmitters and switches. Type in the start and end pressures and number of measurement points. The 729 does the rest by documenting the applied pressure, measured mA values and % error for each measurement point. The bright colour graphic display warns in red of test results that are out of tolerance. Automatic internal pressure fine-tuning helps compensate for small leaks in hoses and test settings. There is then no need to turn a fine regulator to compensate for leaks, eliminating the need for manual pumping and manual fine-tuning of test set-ups. HART communication allows adjustment of the mA output signal, of applied values and of the pressure zero point of HART pressure transmitters. You can perform light configuration tasks such as changing a transmitter tag, measurement units and range setting. Other supported HART tasks include setting fixed mA output signals for troubleshooting, reading equipment configuration and variables, and reading equipment diagnostic data. Measure mA signals on transmitter outputs, generate and simulate mA signals for testing I/Ps and other mA loop devices. andIncludes a 24V loop power supply for testing and powering transmitters during individual tests while the transmitters are disconnected from the control system. Rugged portable designWith [26] Fluke Connect compatibility lets a user perform remote monitoring tasks using the Fluke Connect mobile app, as well as manage and store pressure measurements and log events. Share measurements using ShareLive video calls and emails. Temperature measurements with optional 720RTD thermocouple to perform transfer calibrations. Pressure measurements with old 700-series and new 750-series pressure modules when different pressure measurement ranges or resolutions are desired. Support in different languages:: select a language in the instrument configuration programme. HART communication commands are limited to English, according to HART equipment descriptors and protocol. Semi-rigid carrying case is specially designed for on-site work, to store test hoses, fittings, test leads and small hand tools for on-site pressure calibrations. ds: dsc: kts: FC automatic pressure calibrator (10 bar) kpn: 729 150G kpn_dash: kpn_clear: 729150G bkpn: FLUKE 729 150G bkpn_clear: FLUKE 729150G c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4856894 sr_ns: FLUKE4856894
r: 08122533 p: 14568.925 pid: 166269 b: FLUKE q: 0 st: lt: 8 ean: 0195112030905 sr: FLUKE 5300476 sr_no_br: 5300476 sr_no_br_cl: 5300476 sr_cl: FLUKE5300476 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Max. pressure 42 bar n: FLUKE 729 PRO 4M automatic pressure calibrator (-0.9 to 40 bar) - 5300476 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description Automatic pressure build-up and control up to 600 psi Interchangeable pressure control modules Reaches high pressure set points quickly, so you get more done Built-in test template, easy one-button documented calibration HART communication Pressure leakage tests Automatic pressure fine-tuning, automatic pressure stabilisation Powerful Li-ion battery Extended measuring range with 750P series pressure modules Temperature measurements with 720RTD thermocouple Bright two/three colour graphical display Robust and portable design with 3-year warranty as standard ds: dsc: Scope of delivery Automatic pressure calibrator 729 Pro AC-DC converter Power cord Rechargeable Li-ion battery Tape measure lead set AC280 Sure Grip Hook Set (red and black) Alligator clips (red and black) One set of TP220 measuring pens (red and black) USB communication cable: Type-A for PC to mini-B for the device (1 m) Flexible hose (diameter 2 mm, length 1.5 m) Fitting: 1/8" NPT female thread x 1/4" NPT female thread Fitting: 1/8" NPT male thread x 1/4" NPT male thread 13 Fitting: 1/8 inch NPT female thread x M20 female thread 14 Fitting: 1/4 inch BSP female thread x 1/8 inch NPT female thread PTFE tape Pressure measuring module (PMM) Hose for draining condensed water generated in the product. Diameter 1/8 inch, length 0.3 m Adjustable strap with quick connector for hanging the product Safety information Traceable calibration report with data kts: automatic pressure calibrator (-0.9 to 40 bar) kpn: 729 PRO 4M kpn_dash: kpn_clear: 729PRO4M bkpn: FLUKE 729 PRO 4M bkpn_clear: FLUKE 729PRO4M c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 5300476 sr_ns: FLUKE5300476
r: 02952060 p: 14331.628 pid: 73431 b: FLUKE q: 0 st: lt: 8 ean: 0095969840408 sr: FLUKE 4856976 sr_no_br: 4856976 sr_no_br_cl: 4856976 sr_cl: FLUKE4856976 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 729 300G automatic pressure calibrator (20 bar) - 4856976 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: The Fluke 729 automatic pressure calibrator was designed specifically with process engineers in mind. This pressure calibrator simplifies the pressure calibration process and provides faster, more accurate test results. Technicians know that calibrating pressure can be a time-consuming task, but the 729 makes it easier than ever: with an electric pump that automatically builds and regulates pressure in one easy-to-use, rugged, portable package. The 729 is the ideal portable pressure calibrator, on which you simply type in a desired pressure value after which the calibrator automatically pumps until the desired set point is reached. Then the internal fine adjustment automatically stabilises the pressure to the requested value. The Fluke 729 can also automatically test multiple pressure measurement points and automatically document the results. Calibration is as simple as typing in the initial and final pressure, the number of measurement points and the tolerance level. The 729 does the rest. Built-in HART communication capabilities allow adjustment of mA settings of HART transmitters, light HART configurations and tuning to applied 0% and 100% values. Upload and manage documented calibration results with the DPCTrack2 calibration management software, making it easy to manage your instruments, create scheduled checks and reports, and manage calibration data. With a choice of three ranges, namely 30 psi (2 bar, 200 kPa), 150 psi (10 bar, 1 MPa) and 300 psi (20 bar, 2 MPa), the Fluke 729 automatic pressure calibrators are designed to perform when and where you need them. Key features: Automatic pressure build-up and control up to 300 psi Easy process documentation with built-in test templates Automatic internal pressure fine-tuning Measure, generate and simulate signals from 4 to 20 mA 24V loop power supply for powering transmitters for tests Clear two/three-channel colour graphic display HART communication for testing smart HART transmitters Built-in leak test for checking test fixtures for leakage Rugged portable design with standard 3-year warranty Compatibility with the Fluke Connect app Temperature measurements with optional 720RTD thermocouple V DC measurement for testing transmitters with outputs from 1 V DC to 5 V DC Compatible with 700-series and 750-series pressure modules Uploading of documented test results to DPCTrack2 calibration management software Innovative semi-rigid carrying case specially designed for on-site work Automatic pressure generation and control up to 300 psi (20 bar, 2MPa) Enter a pressure and the 729 automatically pumps until the desired pressure is reached. Enter a test template and the 729 will automatically pump and document a multi-point pressure calibration test. Easy documentation of calibration using defined templates for transmitters and switches. Type in the start and end pressures and number of measurement points. The 729 does the rest by documenting the applied pressure, measured mA values and % error for each measurement point. The bright colour graphic display warns in red of test results that are out of tolerance. Automatic internal pressure fine-tuning helps compensate for small leaks in hoses and test settings. There is then no need to turn a fine regulator to compensate for leaks, eliminating the need for manual pumping and manual fine-tuning of test set-ups. HART communication allows adjustment of the mA output signal, of applied values and of the pressure zero point of HART pressure transmitters. You can perform light configuration tasks such as changing a transmitter tag, measurement units and range setting. Other supported HART tasks include setting fixed mA output signals for troubleshooting, reading equipment configuration and variables, and reading equipment diagnostic data. Measure mA signals on transmitter outputs, generate and simulate mA signals for testing I/Ps and other mA loop devices. andIncludes a 24V loop power supply for testing and powering transmitters during individual tests while the transmitters are disconnected from the control system. Rugged portable designWith [26] Fluke Connect compatibility lets a user perform remote monitoring tasks using the Fluke Connect mobile app, as well as manage and store pressure measurements and log events. Share measurements using ShareLive video calls and emails. Temperature measurements with optional 720RTD thermocouple to perform transfer calibrations. Pressure measurements with old 700-series and new 750-series pressure modules when different pressure measurement ranges or resolutions are desired. Support in different languages:: select a language in the instrument configuration programme. HART communication commands are limited to English, according to HART equipment descriptors and protocol. Semi-rigid carrying case is specially designed for on-site work, to store test hoses, fittings, test leads and small hand tools for on-site pressure calibrations. ds: dsc: kts: automatic pressure calibrator (20 bar) kpn: 729 300G kpn_dash: kpn_clear: 729300G bkpn: FLUKE 729 300G bkpn_clear: FLUKE 729300G c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4856976 sr_ns: FLUKE4856976
r: 02952062 p: 13858.074 pid: 71215 b: FLUKE q: 0 st: lt: 8 ean: 0095969840422 sr: FLUKE 4856990 sr_no_br: 4856990 sr_no_br_cl: 4856990 sr_cl: FLUKE4856990 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 729 30G automatic pressure calibrator (2 bar) - 4856990 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: The Fluke 729 automatic pressure calibrator was designed specifically with process engineers in mind. This pressure calibrator simplifies the pressure calibration process and provides faster, more accurate test results. Technicians know that calibrating pressure can be a time-consuming task, but the 729 makes it easier than ever: with an electric pump that automatically builds and regulates pressure in one easy-to-use, rugged, portable package. The 729 is the ideal portable pressure calibrator, on which you simply type in a desired pressure value after which the calibrator automatically pumps until the desired set point is reached. Then the internal fine adjustment automatically stabilises the pressure to the requested value. The Fluke 729 can also automatically test multiple pressure measurement points and automatically document the results. Calibration is as simple as typing in the initial and final pressure, the number of measurement points and the tolerance level. The 729 does the rest. Built-in HART communication capabilities allow adjustment of mA settings of HART transmitters, light HART configurations and tuning to applied 0% and 100% values. Upload and manage documented calibration results with the DPCTrack2 calibration management software, making it easy to manage your instruments, create scheduled checks and reports, and manage calibration data. With a choice of three ranges, namely 30 psi (2 bar, 200 kPa), 150 psi (10 bar, 1 MPa) and 300 psi (20 bar, 2 MPa), the Fluke 729 automatic pressure calibrators are designed to perform when and where you need them. Key features: Automatic pressure build-up and control up to 300 psi Easy process documentation with built-in test templates Automatic internal pressure fine-tuning Measure, generate and simulate signals from 4 to 20 mA 24V loop power supply for powering transmitters for tests Clear two/three-channel colour graphic display HART communication for testing smart HART transmitters Built-in leak test for checking test fixtures for leakage Rugged portable design with standard 3-year warranty Compatibility with the Fluke Connect app Temperature measurements with optional 720RTD thermocouple V DC measurement for testing transmitters with outputs from 1 V DC to 5 V DC Compatible with 700-series and 750-series pressure modules Uploading of documented test results to DPCTrack2 calibration management software Innovative semi-rigid carrying case specially designed for on-site work Automatic pressure generation and control up to 300 psi (20 bar, 2MPa) Enter a pressure and the 729 automatically pumps until the desired pressure is reached. Enter a test template and the 729 will automatically pump and document a multi-point pressure calibration test. Easy documentation of calibration using defined templates for transmitters and switches. Type in the start and end pressures and number of measurement points. The 729 does the rest by documenting the applied pressure, measured mA values and % error for each measurement point. The bright colour graphic display warns in red of test results that are out of tolerance. Automatic internal pressure fine-tuning helps compensate for small leaks in hoses and test settings. There is then no need to turn a fine regulator to compensate for leaks, eliminating the need for manual pumping and manual fine-tuning of test set-ups. HART communication allows adjustment of the mA output signal, of applied values and of the pressure zero point of HART pressure transmitters. You can perform light configuration tasks such as changing a transmitter tag, measurement units and range setting. Other supported HART tasks include setting fixed mA output signals for troubleshooting, reading equipment configuration and variables, and reading equipment diagnostic data. Measure mA signals on transmitter outputs, generate and simulate mA signals for testing I/Ps and other mA loop devices. andIncludes a 24V loop power supply for testing and powering transmitters during individual tests while the transmitters are disconnected from the control system. Rugged portable designWith [26] Fluke Connect compatibility lets a user perform remote monitoring tasks using the Fluke Connect mobile app, as well as manage and store pressure measurements and log events. Share measurements using ShareLive video calls and emails. Temperature measurements with optional 720RTD thermocouple to perform transfer calibrations. Pressure measurements with old 700-series and new 750-series pressure modules when different pressure measurement ranges or resolutions are desired. Support in different languages:: select a language in the instrument configuration programme. HART communication commands are limited to English, according to HART equipment descriptors and protocol. Semi-rigid carrying case is specially designed for on-site work, to store test hoses, fittings, test leads and small hand tools for on-site pressure calibrations. ds: dsc: kts: automatic pressure calibrator (2 bar) kpn: 729 30G kpn_dash: kpn_clear: 72930G bkpn: FLUKE 729 30G bkpn_clear: FLUKE 72930G c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4856990 sr_ns: FLUKE4856990
r: 02952061 p: 13598.57 pid: 72721 b: FLUKE q: 0 st: lt: 8 ean: 0095969840415 sr: FLUKE 4856983 sr_no_br: 4856983 sr_no_br_cl: 4856983 sr_cl: FLUKE4856983 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: FLUKE 729 150G FC automatic pressure calibrator (10 bar) - 4856983 cn: PRESSURE CALIBRATOR cn2: PRESSURE CALIBRATOR cn_clear: PRESSURECALIBRATOR d: Product description: The Fluke 729 automatic pressure calibrator was designed specifically with process engineers in mind. This pressure calibrator simplifies the pressure calibration process and provides faster, more accurate test results. Technicians know that calibrating pressure can be a time-consuming task, but the 729 makes it easier than ever: with an electric pump that automatically builds and regulates pressure in one easy-to-use, rugged, portable package. The 729 is the ideal portable pressure calibrator, on which you simply type in a desired pressure value after which the calibrator automatically pumps until the desired set point is reached. Then the internal fine adjustment automatically stabilises the pressure to the requested value. The Fluke 729 can also automatically test multiple pressure measurement points and automatically document the results. Calibration is as simple as typing in the initial and final pressure, the number of measurement points and the tolerance level. The 729 does the rest. Built-in HART communication capabilities allow adjustment of mA settings of HART transmitters, light HART configurations and tuning to applied 0% and 100% values. Upload and manage documented calibration results with the DPCTrack2 calibration management software, making it easy to manage your instruments, create scheduled checks and reports, and manage calibration data. With a choice of three ranges, namely 30 psi (2 bar, 200 kPa), 150 psi (10 bar, 1 MPa) and 300 psi (20 bar, 2 MPa), the Fluke 729 automatic pressure calibrators are designed to perform when and where you need them. Key features: Automatic pressure build-up and control up to 300 psi Easy process documentation with built-in test templates Automatic internal pressure fine-tuning Measure, generate and simulate signals from 4 to 20 mA 24V loop power supply for powering transmitters for tests Clear two/three-channel colour graphic display HART communication for testing smart HART transmitters Built-in leak test for checking test fixtures for leakage Rugged portable design with standard 3-year warranty Compatibility with the Fluke Connect app Temperature measurements with optional 720RTD thermocouple V DC measurement for testing transmitters with outputs from 1 V DC to 5 V DC Compatible with 700-series and 750-series pressure modules Uploading of documented test results to DPCTrack2 calibration management software Innovative semi-rigid carrying case specially designed for on-site work Automatic pressure generation and control up to 300 psi (20 bar, 2MPa) Enter a pressure and the 729 automatically pumps until the desired pressure is reached. Enter a test template and the 729 will automatically pump and document a multi-point pressure calibration test. Easy documentation of calibration using defined templates for transmitters and switches. Type in the starting and ending pressures and number of measurement points. The 729 does the rest by documenting the applied pressure, measured mA values and % error for each measurement point. The bright colour graphic display warns in red of test results that are out of tolerance. Automatic internal pressure fine-tuning helps compensate for small leaks in hoses and test settings. There is then no need to turn a fine regulator to compensate for leaks, eliminating the need for manual pumping and manual fine-tuning of test set-ups. HART communication allows adjustment of the mA output signal, of applied values and of the pressure zero point of HART pressure transmitters. You can perform light configuration tasks such as changing a transmitter tag, measurement units and range setting. Other supported HART tasks include setting fixed mA output signals for troubleshooting, reading equipment configuration and variables, and reading equipment diagnostic data. Measure mA signals on transmitter outputs, generate and simulate mA signals for testing I/Ps and other mA loop devices. andIncludes a 24V loop power supply for testing and powering transmitters during individual tests while the transmitters are disconnected from the control system. Rugged portable designWith [26] Fluke Connect compatibility lets a user perform remote monitoring tasks using the Fluke Connect mobile app, as well as manage and store pressure measurements and log events. Share measurements using ShareLive video calls and emails. Temperature measurements with optional 720RTD thermocouple to perform transfer calibrations. Pressure measurements with old 700-series and new 750-series pressure modules when different pressure measurement ranges or resolutions are desired. Support in different languages:: select a language in the instrument configuration programme. HART communication commands are limited to English, according to HART equipment descriptors and protocol. Semi-rigid carrying case is specially designed for on-site work, to store test hoses, fittings, test leads and small hand tools for on-site pressure calibrations. ds: dsc: kts: automatic pressure calibrator (10 bar) kpn: 729 150G FC kpn_dash: kpn_clear: 729150GFC bkpn: FLUKE 729 150G FC bkpn_clear: FLUKE 729150GFC c_path: Home / Tools / Measuring and inspection technique / Digital measuring and inspection instruments / Digital measuring instruments / Pressure calibrator | Home / Our brands / Fluke / Fluke tools / Fluke measuring and inspection technique / Fluke digital measuring and inspection instruments / Fluke digital measuring instruments / Fluke pressure calibrator sr_no_br_cl_ns: 4856983 sr_ns: FLUKE4856983
