r: 02890458 p: 3.83 pid: 176042 b: FISCHER q: 0 st: lt: 8 ean: 4048962181029 sr: FISCHER 522727 sr_no_br: 522727 sr_no_br_cl: 522727 sr_cl: FISCHER522727 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Length (Wall plug) 230 mm Drill hole depth - mm Material (wall plug) Polyamide (Nylon®) Wall plug type Hammer-in plug With screw Yes Application General type (screw head) T40; HEX 13 mm Drilling diameter 10 mm n: FISCHER 522727 construction plug SXRL 10 x 230 FUS hexagon head cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The versatile with multiple anchorage depth The fischer frame fixing SXRL FUS is approved along with the fischer hexagon head screw with moulded washer and integrated bit holder TX40 for multiple fixings of non-load-bearing systems in masonry, concrete, and aerated concrete. The two expansion zones in the fixing induce forces equally into perforated masonry, these combine to form a long expansion element in aerated concrete and solid building material. The frame fixing with the safety screw made out of zinc-plated steel is suitable for fixings of façade, ceiling and roof substructures made of metal. ETA assessment with excellent load values: Safe multiple fixings of non-structural systems in concrete and masonry The long expansion element with three anchorage depths makes the SXRL versatile Loads are applied evenly to the building material thanks to the fixing geometry. This means that the fillets are not destroyed in the case of thin-walled building materials Simple to assemble: Ribs prevent plug rotation during installation The long expansion element with multiple anchorage depths of 50, 70 or 90 mm for SXRL 8 and SXRL 10 and 70 or 90 mm for SXRL 14 makes the SXRL an extremely versatile product Through the special geometry of the plug, the retention forces are evenly distributed in the drill hole The approval for single-point fixing in cracked concrete makes the SXRL the designated specialist in concrete particularly for tasks such as the installation of awning roofs and outdoor railings compared to steel anchors When it is to be set deep, the longer ribs prevent the plug from turning during installation The SXRL 14 is additionally approved for applications that are subject to pressure and may be used for façade structures that are installed without wall bracket with a spacing The SXRL with effective lengths up to 240 mm provides the right plug for every application Suitable for The SXRL is suitable for push-through installation In perforated brick masonry a force transmission that protects the substrate is guaranteed through the two expansion zones. The porous block fillets are not crushed by the second expansion zone an therefore serves to transmit the force In aerated concrete and solid building materials, the two expansion zones combine to form one long expansion element, thus providing for a uniform and flat distribution of the load into the substrate Countersunk head screws are recommended for fixing timber constructions. For metal constructions, plug with wide sleeve rim and hexagon head screws with moulded washer Building materials Approved for: Vertically perforated brick Aerated concrete Hollow blocks made from lightweight concrete Perforated sand-lime brick Thermal insulation blocks Solid block made from lightweight and normal weight concrete Solid brick Solid sand-lime brick Concrete >= C12/15 Also suitable for: Natural stone with dense structure Solid panel made from gypsum Application Façade, ceiling and roof substructures made of wood and metal Facade substructures under compression load (e. g. distance installation without a wall bracket) Windows Gates and doors Wardrobes Kitchen hanging cabinets Squared timbers Beams TV consoles Wall covering Metal brackets Metal supports Cable ducts Cable trays ds: dsc: kts: construction plug SXRL 10 x 230 FUS hexagon head kpn: 522727 kpn_dash: kpn_clear: 522727 bkpn: FISCHER 522727 bkpn_clear: FISCHER 522727 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 522727 sr_ns: FISCHER522727
r: 08134133 p: 3.69 pid: 176394 b: FISCHER q: 0 st: lt: 8 ean: sr: FISCHER 542801 sr_no_br: 542801 sr_no_br_cl: 542801 sr_cl: FISCHER542801 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Drilling diameter 12 mm Length (Wall plug) 60 mm Drill hole depth - mm Material (wall plug) Plastic Wall plug type Cavity wall plug With screw Yes With collar No Application General n: FISCHER 542801 Hollow wall plug DuoTec 12 (2 pcs) cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The assembly-friendly solution for heavy loads in sheet metal. A combination of two material components for more power. The flange sleeve reinforces the drill hole and enables significantly higher transverse forces. The curved handle enables obstacle detection before starting assembly. The flexible screw fastening allows the use of screws and hooks with different thread shapes. The fibreglass-reinforced plastic and metal insert (fischer DuoTec 12) ensure the absorption of high tensile and transverse forces in all types of board material. The soft, grey nylon contact side distributes the load over the entire panel surface, thus minimising any weakening of the load-bearing building material. Common borehole diameters and a short rocker element ensure easy mounting even in small or insulated hollow spaces. The white flange sleeve with locking function ensures fast and secure mounting of the plug in the drilled hole. With scale on the band (fischer DuoTec 12) for determining the required screw length (scale value + 20 mm). The unique action and the geometry of the fischer DuoTec's plug allow for extremely heavy loads for rocker plugs. This reduces the number of fasteners in multiple fastenings and maximises safety. As part of the DuoLine, the DuoTec consists of two plastic components. The red and hard component of the plug's sleeve enables the uniform distribution of the load, while the grey and white prevent damage to the surface of the board during fastening and thus a load reduction. In applications in board materials, which have a hollow space behind them, the DuoTec is applied as a tumbling plug. In solid building materials, the plug can also be used as a spreader plug. Applications Suspended kitchen cabinets Wall cabinets Bookshelves Wardrobes Handrails Paintings Mirrors Lamps Heavy hanging baskets Building materials Suitable for: Plasterboard Gypsum fibreboard Wooden panels (e.g. OSB, chipboard, MDF, etc.) Steel plate Plastic sheets Concrete hollow brick Also suitable for: Solid materials such as concrete and wood ds: dsc: kts: Hollow wall plug DuoTec 12 (2 pcs) kpn: 542801 kpn_dash: kpn_clear: 542801 bkpn: FISCHER 542801 bkpn_clear: FISCHER 542801 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 542801 sr_ns: FISCHER542801
r: 02630048 p: 3.57 pid: 176195 b: FISCHER q: 0 st: lt: 6 ean: 4048962180817 sr: FISCHER 522706 sr_no_br: 522706 sr_no_br_cl: 522706 sr_cl: FISCHER522706 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Length (Wall plug) 230 mm Drill hole depth 240 mm Material (wall plug) Polyamide (Nylon®) Wall plug type Hammer-in plug With screw Yes Application General type (screw head) T40 Drilling diameter 10 mm n: FISCHER 522706 construction plug SXRL 10 x 230 T countersunk head cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The versatile with multiple anchorage depth The fischer frame fixing SXRL-T is approved along with the fischer countersunk head screw with TX40 drive for multiple fixings of non-load-bearing systems in masonry, concrete, and aerated concrete. The two expansion zones in the fixing induce forces equally into perforated masonry, these combine to form a long expansion element in aerated concrete and solid building material. The frame fixing with the safety screw made out of zinc-plated steel is suitable for fixings in internal areas such as windows, coat racks, wall cupboards, or TV consoles. ETA assessment with excellent load values: Safe multiple fixings of non-structural systems in concrete and masonry The long expansion element with three anchorage depths makes the SXRL versatile Loads are applied evenly to the building material thanks to the fixing geometry. This means that the fillets are not destroyed in the case of thin-walled building materials Simple to assemble: Ribs prevent plug rotation during installation The long expansion element with multiple anchorage depths of 50, 70 and 90 mm for SXRL 8 and SXRL 10 and 70 and 90 mm for SXRL 14 makes the SXRL an extremely versatile product Through the special geometry of the plug, the retention forces are evenly distributed in the drill hole The approval for single-point fixing in cracked concrete makes the SXRL the designated specialist in concrete particularly for tasks such as the installation of awning roofs and outdoor railings compared to steel anchors When it is to be set deep, the longer ribs prevent the plug from turning during installation The SXRL 14 is additionally approved for applications that are subject to pressure and may be used for façade structures that are installed without wall bracket with a spacing The SXRL with effective lengths up to 290 mm provides the right plug for every application Suitable for The SXRL is suitable for push-through installation In perforated brick masonry a force transmission that protects the substrate is guaranteed through the two expansion zones. The porous block fillets are not crushed by the second expansion zone an therefore serves to transmit the force In aerated concrete and solid building materials, the two expansion zones combine to form one long expansion element, thus providing for a uniform and flat distribution of the load into the substrate Countersunk head screws are recommended for fixing timber constructions. For metal constructions, plug with wide sleeve rim and hexagon head screws with moulded washer Building materials Approved for: Vertically perforated brick Aerated concrete Hollow blocks made from lightweight concrete Perforated sand-lime brick Thermal insulation blocks Solid block made from lightweight and normal weight concrete Solid brick Solid sand-lime brick Concrete >= C12/15 Also suitable for: Natural stone with dense structure Solid panel made from gypsum Application Façade, ceiling and roof substructures made of wood and metal Facade substructures under compression load (e. g. distance installation without a wall bracket) Windows Gates and doors Wardrobes Kitchen hanging cabinets Squared timbers Beams TV consoles Wall covering Metal brackets Metal supports Cable ducts Cable trays ds: dsc: kts: construction plug SXRL 10 x 230 T countersunk head kpn: 522706 kpn_dash: kpn_clear: 522706 bkpn: FISCHER 522706 bkpn_clear: FISCHER 522706 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 522706 sr_ns: FISCHER522706
r: 08134128 p: 3.32 pid: 176361 b: FISCHER q: 0 st: lt: 8 ean: sr: FISCHER 537264 sr_no_br: 537264 sr_no_br_cl: 537264 sr_cl: FISCHER537264 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Drilling diameter 10 mm Length (Wall plug) 50 mm Drill hole depth - mm Material (wall plug) Plastic Wall plug type Cavity wall plug With screw Yes With collar Yes Application General n: FISCHER 537264 Hollow wall plug DuoTec 10 RH with round hook (2 pcs) cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description User-friendly nylon hollow wall plug for high loads in all sheet material types Combination of two material components for improved performance. Equipped with matching round hook. The recessed sleeve reinforces the drill hole and allows significantly higher transverse loads. Curved pull band allows detection of obstacles behind the plate before mounting. Flexible screw mounting allows the use of screws and hooks with different thread shapes. Glass fibre-reinforced plastics and a metal skeleton insert ensure high tensile and transverse loads in all sheet material types. The grey, soft nylon contact surface distributes the load over the panel surface, preventing weakening of the supporting building material. Standard borehole diameters and a compact tilt anchor ensure easy installation in narrow cavities, even in the presence of insulation. The white recessed sleeve with click function allows quick and safe pre-installation in the drilled hole. Equipped with a length indicator on the tension band for determining the required screw length (scale value + 20 mm). Thanks to the unique operation and geometry of the toggle, the DuoTec, as a gravity plug, can take exceptionally high loads. In applications with multiple fastening points, this allows the number of fasteners required to be reduced while maximising safety. As part of the DUO line, the DuoTec consists of two plastic components: the red, hard part of the plug sleeve ensures even load distribution. The grey, soft part prevents damage to the plate surface by the attachment and thus reduces the point load. The DuoTec is installed as a gravity plug in sheet material, but is also suitable as a spreading plug in solid building materials. Applications Suspended kitchen cupboards Living room cabinets Shelves Cloakroom cabinets Handrails Photos Mirrors Lamps Heavy hanging baskets Building materials Suitable for: Plasterboard Gypsum fibreboard Wooden panels, such as OSB boards, chipboard, MDF boards Steel plates Plastic boards Hollow concrete blocks Also works in: Solid materials, such as concrete and wood ds: dsc: Scope of delivery (per purchase of 5) 2x DuoTec 10 2x Round hook 5.0x 84 kts: Hollow wall plug DuoTec 10 RH with round hook (2 pcs) kpn: 537264 kpn_dash: kpn_clear: 537264 bkpn: FISCHER 537264 bkpn_clear: FISCHER 537264 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 537264 sr_ns: FISCHER537264
r: 08134130 p: 2.9 pid: 176402 b: FISCHER q: 0 st: lt: 8 ean: 4048962267440 sr: FISCHER 539027 sr_no_br: 539027 sr_no_br_cl: 539027 sr_cl: FISCHER539027 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Drilling diameter 10 mm Length (Wall plug) 50 mm Drill hole depth - mm Material (wall plug) Plastic Wall plug type Cavity wall plug With screw Yes With collar Yes Application General n: FISCHER 539027 Hollow wall plug DuoTec 10 S PH with round head screw (2 pcs) cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The assembly-friendly solution for heavy loads in sheet metal. A combination of two material components for more power. The flange sleeve reinforces the drill hole and enables significantly higher transverse forces. The curved handle enables obstacle detection before starting assembly. The flexible screw fastening allows the use of screws and hooks with different thread shapes. The fibreglass-reinforced plastic and metal insert ensure the absorption of high tensile and transverse forces in all types of sheet material. The soft, grey nylon contact side distributes the load over the entire sheet surface, minimising any weakening of the supporting building material. Common borehole diameters and a short rocker element ensure easy installation even in small or insulated hollow spaces. The white flange sleeve with locking function ensures fast and secure mounting of the plug in the drilled hole. With scale on the band for determining the required screw length (scale value + 20 mm). The unique functioning and the geometry of the fischer DuoTec plug allow for extremely heavy loads for rocker plugs. This reduces the number of fasteners in multiple fastenings and maximises safety. As part of the DuoLine, the DuoTec consists of two plastic components. The red and hard component of the plug's sleeve enables the uniform distribution of the load, while the grey and white prevent damage to the surface of the board during fastening and thus a load reduction. In applications in board materials, which have a hollow space behind them, the DuoTec is applied as a tumbling plug. In solid building materials, the plug can also be used as a spreader plug. Applications Suspended kitchen cabinets Wall cabinets Bookshelves Wardrobes Handrails Paintings Mirrors Lamps Heavy hanging baskets Building materials Suitable for: Plasterboard Gypsum fibreboard Wooden panels (e.g. OSB, chipboard, MDF, etc.) Steel plate Plastic sheets Concrete hollow brick Also suitable for: Solid materials such as concrete and wood ds: dsc: Scope of delivery 2x DuoTec 10 2x screw with cylinder head 5.0x 60 kts: Hollow wall plug DuoTec 10 S PH with round head screw (2 pcs) kpn: 539027 kpn_dash: kpn_clear: 539027 bkpn: FISCHER 539027 bkpn_clear: FISCHER 539027 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 539027 sr_ns: FISCHER539027
r: 02678256 p: 2.81 pid: 176204 b: FISCHER q: 0 st: lt: 6 ean: 4006209786635 sr: FISCHER 78663 sr_no_br: 78663 sr_no_br_cl: 78663 sr_cl: FISCHER78663 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Length (Wall plug) 43 mm Drill hole depth 50 mm Material (wall plug) Brass Wall plug type Brass plug With screw No With collar No Application Concrete type (screw head) Drilling diameter 20 mm n: FISCHER 78663 brass plug MS 16 x 43 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The brass expansion fixing with metric thread. The fischer brass fixing MS is an expansion plug made of brass for holding a metric thread. The special fixing is set in the pre-positioned installation. When driving in the screw or the threaded rod the brass fixing expands and anchors itself in the drill hole. Above all, the fischer brass fixing MS is suitable for fixing shelves, flow heaters, and aggregates in solid building materials. Fast installation due to compact design No rotation due to non-slip surface structure Flexibility due to using conventional screws and threaded rods Surface flush removal possible The compact design of the brass fixing reduces the amount of drilling required, helping to ensure a fast installation The special surface structure of the MS prevents the fixing from rotating in the drill hole. This provides increased installation safety The internal thread allows for the use of standard metric screws or threaded rods, and for surface flush removal and reuse of the fixing point. This provides great flexibility Suitable for The MS brass fixing is suitable for pre-positioned and push-through installation Turning in the metric screw causes the front part of the brass fixing to expand, thus securely anchoring it in the substrate Calculating screw length for flush fixing installation: Fixing length + fixture thickness = min. screw length Suitable for metric screws and threaded bolts The brass fixing may have to be expanded slightly before installation by turning in the threaded screw Building materials Concrete Solid sand-lime brick Natural stone with dense structure Solid brick Application Cellar shelves Substructures made of wood and metal Boilers Aggregates Control boxes Curtain rails ds: dsc: kts: brass plug MS 16 x 43 kpn: 78663 kpn_dash: kpn_clear: 78663 bkpn: FISCHER 78663 bkpn_clear: FISCHER 78663 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 78663 sr_ns: FISCHER78663
r: 02890457 p: 2.68 pid: 176046 b: FISCHER q: 0 st: lt: 8 ean: 4048962181012 sr: FISCHER 522726 sr_no_br: 522726 sr_no_br_cl: 522726 sr_cl: FISCHER522726 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Length (Wall plug) 200 mm Drill hole depth - mm Material (wall plug) Polyamide (Nylon®) Wall plug type Hammer-in plug With screw Yes Application General type (screw head) T40; HEX 13 mm Drilling diameter 10 mm n: FISCHER 522726 construction plug SXRL 10 x 200 FUS hexagonal head cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The versatile with multiple anchorage depth The fischer frame fixing SXRL FUS is approved along with the fischer hexagon head screw with moulded washer and integrated bit holder TX40 for multiple fixings of non-load-bearing systems in masonry, concrete, and aerated concrete. The two expansion zones in the fixing induce forces equally into perforated masonry, these combine to form a long expansion element in aerated concrete and solid building material. The frame fixing with the safety screw made out of zinc-plated steel is suitable for fixings of façade, ceiling and roof substructures made of metal. ETA assessment with excellent load values: Safe multiple fixings of non-structural systems in concrete and masonry The long expansion element with three anchorage depths makes the SXRL versatile Loads are applied evenly to the building material thanks to the fixing geometry. This means that the fillets are not destroyed in the case of thin-walled building materials Simple to assemble: Ribs prevent plug rotation during installation The long expansion element with multiple anchorage depths of 50, 70 or 90 mm for SXRL 8 and SXRL 10 and 70 or 90 mm for SXRL 14 makes the SXRL an extremely versatile product Through the special geometry of the plug, the retention forces are evenly distributed in the drill hole The approval for single-point fixing in cracked concrete makes the SXRL the designated specialist in concrete particularly for tasks such as the installation of awning roofs and outdoor railings compared to steel anchors When it is to be set deep, the longer ribs prevent the plug from turning during installation The SXRL 14 is additionally approved for applications that are subject to pressure and may be used for façade structures that are installed without wall bracket with a spacing The SXRL with effective lengths up to 240 mm provides the right plug for every application Suitable for The SXRL is suitable for push-through installation In perforated brick masonry a force transmission that protects the substrate is guaranteed through the two expansion zones. The porous block fillets are not crushed by the second expansion zone an therefore serves to transmit the force In aerated concrete and solid building materials, the two expansion zones combine to form one long expansion element, thus providing for a uniform and flat distribution of the load into the substrate Countersunk head screws are recommended for fixing timber constructions. For metal constructions, plug with wide sleeve rim and hexagon head screws with moulded washer Building materials Approved for: Vertically perforated brick Aerated concrete Hollow blocks made from lightweight concrete Perforated sand-lime brick Thermal insulation blocks Solid block made from lightweight and normal weight concrete Solid brick Solid sand-lime brick Concrete >= C12/15 Also suitable for: Natural stone with dense structure Solid panel made from gypsum Application Façade, ceiling and roof substructures made of wood and metal Facade substructures under compression load (e. g. distance installation without a wall bracket) Windows Gates and doors Wardrobes Kitchen hanging cabinets Squared timbers Beams TV consoles Wall covering Metal brackets Metal supports Cable ducts Cable trays ds: dsc: kts: construction plug SXRL 10 x 200 FUS hexagonal head kpn: 522726 kpn_dash: kpn_clear: 522726 bkpn: FISCHER 522726 bkpn_clear: FISCHER 522726 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 522726 sr_ns: FISCHER522726
r: 08134127 p: 2.62 pid: 176379 b: FISCHER q: 0 st: lt: 8 ean: sr: FISCHER 537263 sr_no_br: 537263 sr_no_br_cl: 537263 sr_cl: FISCHER537263 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Drilling diameter 10 mm Length (Wall plug) 50 mm Drill hole depth - mm Material (wall plug) Plastic Wall plug type Cavity wall plug With screw Yes With collar Yes Application General n: FISCHER 537263 Hollow wall plug DuoTec 10 S with screw (2 pcs) cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The assembly-friendly solution for heavy loads in sheet metal. A combination of two material components for more power. The flange sleeve reinforces the drill hole and enables significantly higher transverse forces. The curved handle enables obstacle detection before starting assembly. The flexible screw fastening allows the use of screws and hooks with different thread shapes. The fibreglass-reinforced plastic and metal insert ensure the absorption of high tensile and transverse forces in all types of sheet material. The soft, grey nylon contact side distributes the load over the entire sheet surface, minimising any weakening of the supporting building material. Common borehole diameters and a short rocker element ensure easy installation even in small or insulated hollow spaces. The white flange sleeve with locking function ensures fast and secure mounting of the plug in the drilled hole. With scale on the band for determining the required screw length (scale value + 20 mm). The unique functioning and geometry of the dowel allow extremely heavy loads for rocker plugs. This reduces the number of fasteners in multiple fastenings and maximises safety. As part of the DuoLine, the DuoTec consists of two plastic components. The red and hard component of the plug's sleeve enables the uniform distribution of the load, while the grey and white prevent damage to the surface of the board during fastening and thus a load reduction. In applications in board materials, which have a hollow space behind them, the DuoTec is applied as a tumbling plug. In solid building materials, the plug can also be used as a spreader plug. Applications Suspended kitchen cabinets Wall cabinets Bookshelves Wardrobes Handrails Paintings Mirrors Lamps Heavy hanging baskets Building materials Suitable for: Plasterboard Gypsum fibreboard Wooden panels (e.g. OSB, chipboard, MDF, etc.) Steel plate Plastic sheets Concrete hollow brick Also suitable for: Solid materials such as concrete and wood ds: dsc: Scope of delivery (per purchase of 5) 2x DuoTec hollow wall plug 2x screw 5x 60 kts: Hollow wall plug DuoTec 10 S with screw (2 pcs) kpn: 537263 kpn_dash: kpn_clear: 537263 bkpn: FISCHER 537263 bkpn_clear: FISCHER 537263 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 537263 sr_ns: FISCHER537263
r: 02890431 p: 2.5 pid: 176032 b: FISCHER q: 0 st: lt: 8 ean: 4048962180800 sr: FISCHER 522705 sr_no_br: 522705 sr_no_br_cl: 522705 sr_cl: FISCHER522705 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Length (Wall plug) 180 mm Drill hole depth - mm Material (wall plug) Polyamide (Nylon®) Wall plug type Hammer-in plug With screw Yes Application General type (screw head) T40 Drilling diameter 10 mm n: FISCHER 522705 construction plug SXRL 10 x 200 T countersunk head cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The versatile with multiple anchorage depth The fischer frame fixing SXRL-T is approved along with the fischer countersunk head screw with TX40 drive for multiple fixings of non-load-bearing systems in masonry, concrete, and aerated concrete. The two expansion zones in the fixing induce forces equally into perforated masonry, these combine to form a long expansion element in aerated concrete and solid building material. The frame fixing with the safety screw made out of zinc-plated steel is suitable for fixings in internal areas such as windows, coat racks, wall cupboards, or TV consoles. ETA assessment with excellent load values: Safe multiple fixings of non-structural systems in concrete and masonry The long expansion element with three anchorage depths makes the SXRL versatile Loads are applied evenly to the building material thanks to the fixing geometry. This means that the fillets are not destroyed in the case of thin-walled building materials Simple to assemble: Ribs prevent plug rotation during installation The long expansion element with multiple anchorage depths of 50, 70 and 90 mm for SXRL 8 and SXRL 10 and 70 and 90 mm for SXRL 14 makes the SXRL an extremely versatile product Through the special geometry of the plug, the retention forces are evenly distributed in the drill hole The approval for single-point fixing in cracked concrete makes the SXRL the designated specialist in concrete particularly for tasks such as the installation of awning roofs and outdoor railings compared to steel anchors When it is to be set deep, the longer ribs prevent the plug from turning during installation The SXRL 14 is additionally approved for applications that are subject to pressure and may be used for façade structures that are installed without wall bracket with a spacing The SXRL with effective lengths up to 290 mm provides the right plug for every application Suitable for The SXRL is suitable for push-through installation In perforated brick masonry a force transmission that protects the substrate is guaranteed through the two expansion zones. The porous block fillets are not crushed by the second expansion zone an therefore serves to transmit the force In aerated concrete and solid building materials, the two expansion zones combine to form one long expansion element, thus providing for a uniform and flat distribution of the load into the substrate Countersunk head screws are recommended for fixing timber constructions. For metal constructions, plug with wide sleeve rim and hexagon head screws with moulded washer Building materials Approved for: Vertically perforated brick Aerated concrete Hollow blocks made from lightweight concrete Perforated sand-lime brick Thermal insulation blocks Solid block made from lightweight and normal weight concrete Solid brick Solid sand-lime brick Concrete >= C12/15 Also suitable for: Natural stone with dense structure Solid panel made from gypsum Application Façade, ceiling and roof substructures made of wood and metal Facade substructures under compression load (e. g. distance installation without a wall bracket) Windows Gates and doors Wardrobes Kitchen hanging cabinets Squared timbers Beams TV consoles Wall covering Metal brackets Metal supports Cable ducts Cable trays ds: dsc: kts: construction plug SXRL 10 x 200 T countersunk head kpn: 522705 kpn_dash: kpn_clear: 522705 bkpn: FISCHER 522705 bkpn_clear: FISCHER 522705 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 522705 sr_ns: FISCHER522705
r: 08134126 p: 2.42 pid: 176391 b: FISCHER q: 0 st: lt: 8 ean: sr: FISCHER 537262 sr_no_br: 537262 sr_no_br_cl: 537262 sr_cl: FISCHER537262 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Drilling diameter 10 mm Length (Wall plug) 50 mm Drill hole depth - mm Material (wall plug) Plastic Wall plug type Cavity wall plug With screw Yes With collar Yes Application General n: FISCHER 537262 Hollow wall plug DuoTec 10 (2 pcs) cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The assembly-friendly solution for heavy loads in sheet metal. A combination of two material components for more power. The flange sleeve reinforces the drill hole and enables significantly higher transverse forces. The curved handle enables obstacle detection before starting assembly. The flexible screw fastening allows the use of screws and hooks with different thread shapes. The fibreglass-reinforced plastic and metal insert ensure the absorption of high tensile and transverse forces in all types of sheet material. The soft, grey nylon contact side distributes the load over the entire sheet surface, minimising any weakening of the supporting building material. Common borehole diameters and a short rocker element ensure easy installation even in small or insulated hollow spaces. The white flange sleeve with locking function ensures fast and secure mounting of the plug in the drilled hole. With scale on the band for determining the required screw length (scale value + 20 mm). The unique functioning and geometry of the dowel allow extremely heavy loads for rocker plugs. This reduces the number of fasteners in multiple fastenings and maximises safety. As part of the DuoLine, the DuoTec consists of two plastic components. The red and hard component of the plug's sleeve enables the uniform distribution of the load, while the grey and white prevent damage to the surface of the board during fastening and thus a load reduction. In applications in board materials, which have a hollow space behind them, the DuoTec is applied as a tumbling plug. In solid building materials, the plug can also be used as a spreader plug. Applications Suspended kitchen cabinets Wall cabinets Bookshelves Wardrobes Handrails Paintings Mirrors Lamps Heavy hanging baskets Building materials Suitable for: Plasterboard Gypsum fibreboard Wooden panels (e.g. OSB, chipboard, MDF, etc.) Steel plate Plastic sheets Concrete hollow brick Also suitable for: Solid materials such as concrete and wood ds: dsc: kts: Hollow wall plug DuoTec 10 (2 pcs) kpn: 537262 kpn_dash: kpn_clear: 537262 bkpn: FISCHER 537262 bkpn_clear: FISCHER 537262 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 537262 sr_ns: FISCHER537262
r: 02824749 p: 2.08 pid: 176014 b: FISCHER q: 0 st: lt: 8 ean: 4048962293357 sr: FISCHER 541909 sr_no_br: 541909 sr_no_br_cl: 541909 sr_cl: FISCHER541909 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Length 180 mm n: FISCHER 541909 tension sleeve FNH 8 x 180 cn: NAIL SLEEVE cn2: NAIL SLEEVE cn_clear: NAILSLEEVE d: Product description The user-friendly spring sleeve for light fixings in solid building materials. The fischer nail sleeve FNH is a user-friendly spring sleeve made out of corrosion-resistant steel. The nail sleeve is driven into the through-type installation in a time-saving manner with the hammer, and expands along its whole length in the drill hole. This allows timber and metal sub-constructions, metal profiles, and squared timbers to be fixed in solid building materials in a cost-effective manner in interior areas and temporarily in external areas. Knock in with the hammer - finished Fixing without screws and plugs. This saves time and lowers costs No plugs or screws are required for the one-piece nail sleeve. This guarantees a simple and easy installation The geometry of the nail sleeve makes it easy to push it into the drill hole. This saves time and money Suitable for The FNH nail sleeve is suitable for push-through installation The nail sleeve is hammered in and expands its entire length in the hole FNH is suitable for interior applications and for temporary external fixings Building materials Concrete Solid sand-lime brick Natural stone with dense structure Solid brick Application Squared timbers Substructures made of wood and metal Metal profiles ds: dsc: kts: tension sleeve FNH 8 x 180 kpn: 541909 kpn_dash: kpn_clear: 541909 bkpn: FISCHER 541909 bkpn_clear: FISCHER 541909 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Clamping sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer clamping sleeve sr_no_br_cl_ns: 541909 sr_ns: FISCHER541909
r: 02316677 p: 1.92 pid: 21656 b: FISCHER q: 0 st: lt: 8 ean: 4006209801796 sr: FISCHER 80179 sr_no_br: 80179 sr_no_br_cl: 80179 sr_cl: FISCHER80179 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Length (Wall plug) 130 mm Drill hole depth - mm Material (wall plug) Polyamide (Nylon®) Wall plug type Toggle plug With screw No Application Construction board type (screw head) Drilling diameter 20 mm n: FISCHER 80179 KDH 8 tumbler plug cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The cavity fixing with hook and wide transition beams for different board thicknesses. With the fischer toggle fixing KD components such as lights can be fixed in gypsum plasterboard and gypsum fibreboard, chipboard, and hollow ceilings made of brick and concrete. The toggle fixing is inserted into the drill hole in the pre-positioned installation and flips open independently when behind the board. This does not require a special installation tool and allows for a fast, convenient installation. High load capacity due to good load distribution on the transition beams High flexibility due to a long thread. Use with various panel thicknesses and attachment thicknesses No installation tool necessary With hook Universal fixing for fastenings in a wide range of drywall and hollow wall materials When the metal crosspiece is pushed. through the drill hole, pull it firmly against the inner wall cavity by tugging the plastic pull ring on the outer wall Afterwards cut the plastic legs off and fasten the fixture with e. g. a screw or screw in a hook or an eyebolt according to your demands Suitable for pre-positioned installation Suitable for The gravity and spring toggle are suitable for pre-positioned installation When placed in the drill hole, the bearing elements of the gravity and spring toggle independently swing open behind the board No special installation tool required. For a fast and convenient installation The KM10 is specially suited to fixing wash basins and urinals into installation and cavity walls Building materials Gypsum plasterboard and gypsum fibreboards Cavity floor slabs made from bricks and concrete Chipboard Plywood Application Pictures Lighting Light shelves Towel rails Mirror cabinets Light cabinets Cable and pipe clips ds: dsc: kts: KDH 8 tumbler plug kpn: 80179 kpn_dash: kpn_clear: 80179 bkpn: FISCHER 80179 bkpn_clear: FISCHER 80179 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 80179 sr_ns: FISCHER80179
r: 02890456 p: 1.89 pid: 176037 b: FISCHER q: 0 st: lt: 8 ean: 4048962181005 sr: FISCHER 522725 sr_no_br: 522725 sr_no_br_cl: 522725 sr_cl: FISCHER522725 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Length (Wall plug) 180 mm Drill hole depth - mm Material (wall plug) Polyamide (Nylon®) Wall plug type Hammer-in plug With screw Yes Application General type (screw head) T40; HEX 13 mm Drilling diameter 10 mm n: FISCHER 522725 construction plug SXRL 10 x 180 FUS hexagonal head cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The versatile with multiple anchorage depth The fischer frame fixing SXRL FUS is approved along with the fischer hexagon head screw with moulded washer and integrated bit holder TX40 for multiple fixings of non-load-bearing systems in masonry, concrete, and aerated concrete. The two expansion zones in the fixing induce forces equally into perforated masonry, these combine to form a long expansion element in aerated concrete and solid building material. The frame fixing with the safety screw made out of zinc-plated steel is suitable for fixings of façade, ceiling and roof substructures made of metal. ETA assessment with excellent load values: Safe multiple fixings of non-structural systems in concrete and masonry The long expansion element with three anchorage depths makes the SXRL versatile Loads are applied evenly to the building material thanks to the fixing geometry. This means that the fillets are not destroyed in the case of thin-walled building materials Simple to assemble: Ribs prevent plug rotation during installation The long expansion element with multiple anchorage depths of 50, 70 or 90 mm for SXRL 8 and SXRL 10 and 70 or 90 mm for SXRL 14 makes the SXRL an extremely versatile product Through the special geometry of the plug, the retention forces are evenly distributed in the drill hole The approval for single-point fixing in cracked concrete makes the SXRL the designated specialist in concrete particularly for tasks such as the installation of awning roofs and outdoor railings compared to steel anchors When it is to be set deep, the longer ribs prevent the plug from turning during installation The SXRL 14 is additionally approved for applications that are subject to pressure and may be used for façade structures that are installed without wall bracket with a spacing The SXRL with effective lengths up to 240 mm provides the right plug for every application Suitable for The SXRL is suitable for push-through installation In perforated brick masonry a force transmission that protects the substrate is guaranteed through the two expansion zones. The porous block fillets are not crushed by the second expansion zone an therefore serves to transmit the force In aerated concrete and solid building materials, the two expansion zones combine to form one long expansion element, thus providing for a uniform and flat distribution of the load into the substrate Countersunk head screws are recommended for fixing timber constructions. For metal constructions, plug with wide sleeve rim and hexagon head screws with moulded washer Building materials Approved for: Vertically perforated brick Aerated concrete Hollow blocks made from lightweight concrete Perforated sand-lime brick Thermal insulation blocks Solid block made from lightweight and normal weight concrete Solid brick Solid sand-lime brick Concrete >= C12/15 Also suitable for: Natural stone with dense structure Solid panel made from gypsum Application Façade, ceiling and roof substructures made of wood and metal Facade substructures under compression load (e. g. distance installation without a wall bracket) Windows Gates and doors Wardrobes Kitchen hanging cabinets Squared timbers Beams TV consoles Wall covering Metal brackets Metal supports Cable ducts Cable trays ds: dsc: kts: construction plug SXRL 10 x 180 FUS hexagonal head kpn: 522725 kpn_dash: kpn_clear: 522725 bkpn: FISCHER 522725 bkpn_clear: FISCHER 522725 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 522725 sr_ns: FISCHER522725
r: 02890430 p: 1.73 pid: 176027 b: FISCHER q: 0 st: lt: 8 ean: 4048962180794 sr: FISCHER 522704 sr_no_br: 522704 sr_no_br_cl: 522704 sr_cl: FISCHER522704 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Length (Wall plug) 160 mm Drill hole depth - mm Material (wall plug) Polyamide (Nylon®) Wall plug type Hammer-in plug With screw Yes Application General type (screw head) T40 Drilling diameter 10 mm n: FISCHER 522704 construction plug SXRL 10 x 180 T countersunk head cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The versatile with multiple anchorage depth The fischer frame fixing SXRL-T is approved along with the fischer countersunk head screw with TX40 drive for multiple fixings of non-load-bearing systems in masonry, concrete, and aerated concrete. The two expansion zones in the fixing induce forces equally into perforated masonry, these combine to form a long expansion element in aerated concrete and solid building material. The frame fixing with the safety screw made out of zinc-plated steel is suitable for fixings in internal areas such as windows, coat racks, wall cupboards, or TV consoles. ETA assessment with excellent load values: Safe multiple fixings of non-structural systems in concrete and masonry The long expansion element with three anchorage depths makes the SXRL versatile Loads are applied evenly to the building material thanks to the fixing geometry. This means that the fillets are not destroyed in the case of thin-walled building materials Simple to assemble: Ribs prevent plug rotation during installation The long expansion element with multiple anchorage depths of 50, 70 and 90 mm for SXRL 8 and SXRL 10 and 70 and 90 mm for SXRL 14 makes the SXRL an extremely versatile product Through the special geometry of the plug, the retention forces are evenly distributed in the drill hole The approval for single-point fixing in cracked concrete makes the SXRL the designated specialist in concrete particularly for tasks such as the installation of awning roofs and outdoor railings compared to steel anchors When it is to be set deep, the longer ribs prevent the plug from turning during installation The SXRL 14 is additionally approved for applications that are subject to pressure and may be used for façade structures that are installed without wall bracket with a spacing The SXRL with effective lengths up to 290 mm provides the right plug for every application Suitable for The SXRL is suitable for push-through installation In perforated brick masonry a force transmission that protects the substrate is guaranteed through the two expansion zones. The porous block fillets are not crushed by the second expansion zone an therefore serves to transmit the force In aerated concrete and solid building materials, the two expansion zones combine to form one long expansion element, thus providing for a uniform and flat distribution of the load into the substrate Countersunk head screws are recommended for fixing timber constructions. For metal constructions, plug with wide sleeve rim and hexagon head screws with moulded washer Building materials Approved for: Vertically perforated brick Aerated concrete Hollow blocks made from lightweight concrete Perforated sand-lime brick Thermal insulation blocks Solid block made from lightweight and normal weight concrete Solid brick Solid sand-lime brick Concrete >= C12/15 Also suitable for: Natural stone with dense structure Solid panel made from gypsum Application Façade, ceiling and roof substructures made of wood and metal Facade substructures under compression load (e. g. distance installation without a wall bracket) Windows Gates and doors Wardrobes Kitchen hanging cabinets Squared timbers Beams TV consoles Wall covering Metal brackets Metal supports Cable ducts Cable trays ds: dsc: kts: construction plug SXRL 10 x 180 T countersunk head kpn: 522704 kpn_dash: kpn_clear: 522704 bkpn: FISCHER 522704 bkpn_clear: FISCHER 522704 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 522704 sr_ns: FISCHER522704
r: 02890455 p: 1.62 pid: 176041 b: FISCHER q: 0 st: lt: 8 ean: 4048962180985 sr: FISCHER 522724 sr_no_br: 522724 sr_no_br_cl: 522724 sr_cl: FISCHER522724 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Length (Wall plug) 160 mm Drill hole depth - mm Material (wall plug) Polyamide (Nylon®) Wall plug type Hammer-in plug With screw Yes Application General type (screw head) T40; HEX 13 mm Drilling diameter 10 mm n: FISCHER 522724 construction plug SXRL 10 x 160 FUS hexagonal head cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The versatile with multiple anchorage depth The fischer frame fixing SXRL FUS is approved along with the fischer hexagon head screw with moulded washer and integrated bit holder TX40 for multiple fixings of non-load-bearing systems in masonry, concrete, and aerated concrete. The two expansion zones in the fixing induce forces equally into perforated masonry, these combine to form a long expansion element in aerated concrete and solid building material. The frame fixing with the safety screw made out of zinc-plated steel is suitable for fixings of façade, ceiling and roof substructures made of metal. ETA assessment with excellent load values: Safe multiple fixings of non-structural systems in concrete and masonry The long expansion element with three anchorage depths makes the SXRL versatile Loads are applied evenly to the building material thanks to the fixing geometry. This means that the fillets are not destroyed in the case of thin-walled building materials Simple to assemble: Ribs prevent plug rotation during installation The long expansion element with multiple anchorage depths of 50, 70 or 90 mm for SXRL 8 and SXRL 10 and 70 or 90 mm for SXRL 14 makes the SXRL an extremely versatile product Through the special geometry of the plug, the retention forces are evenly distributed in the drill hole The approval for single-point fixing in cracked concrete makes the SXRL the designated specialist in concrete particularly for tasks such as the installation of awning roofs and outdoor railings compared to steel anchors When it is to be set deep, the longer ribs prevent the plug from turning during installation The SXRL 14 is additionally approved for applications that are subject to pressure and may be used for façade structures that are installed without wall bracket with a spacing The SXRL with effective lengths up to 240 mm provides the right plug for every application Suitable for The SXRL is suitable for push-through installation In perforated brick masonry a force transmission that protects the substrate is guaranteed through the two expansion zones. The porous block fillets are not crushed by the second expansion zone an therefore serves to transmit the force In aerated concrete and solid building materials, the two expansion zones combine to form one long expansion element, thus providing for a uniform and flat distribution of the load into the substrate Countersunk head screws are recommended for fixing timber constructions. For metal constructions, plug with wide sleeve rim and hexagon head screws with moulded washer Building materials Approved for: Vertically perforated brick Aerated concrete Hollow blocks made from lightweight concrete Perforated sand-lime brick Thermal insulation blocks Solid block made from lightweight and normal weight concrete Solid brick Solid sand-lime brick Concrete >= C12/15 Also suitable for: Natural stone with dense structure Solid panel made from gypsum Application Façade, ceiling and roof substructures made of wood and metal Facade substructures under compression load (e. g. distance installation without a wall bracket) Windows Gates and doors Wardrobes Kitchen hanging cabinets Squared timbers Beams TV consoles Wall covering Metal brackets Metal supports Cable ducts Cable trays ds: dsc: kts: construction plug SXRL 10 x 160 FUS hexagonal head kpn: 522724 kpn_dash: kpn_clear: 522724 bkpn: FISCHER 522724 bkpn_clear: FISCHER 522724 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 522724 sr_ns: FISCHER522724
r: 03297791 p: 1.56 pid: 176157 b: FISCHER q: 0 st: lt: 6 ean: 4048962262261 sr: FISCHER 538259 sr_no_br: 538259 sr_no_br_cl: 538259 sr_cl: FISCHER538259 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm With screw Yes Drilling diameter 14 mm Application General Wall plug type Universal plug Material (wall plug) PA6 - Polyamide 6 (Nylon® 6) Drill hole depth 100 mm Length (Wall plug) 70 mm n: FISCHER 538259 DuoPower 14x70 with hexagonal screw cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The duo of power and intelligence The fischer DuoPower offers very good hold values as a result of its 2 components: Depending on the building material, the grey components made from high quality nylon automatically activates the optimum product function (expansion, folding, knotting) for the best hold. The expansion wings of the red component support the secure expansion and offer additional security to the grey component. Easy screwing-in of the screw and correct "tightening" to close. No over-tightening of the screw. The preshaped edge on the plug head prevents the plug from slipping into the drill hole. The screws provided are optimally suited to the fischer expansion plug DuoPower. Combination of two material components for more performance Secure functions for solid (expansion) and hollow and panel building materials (folding/knotting) Easy installation: narrow edge of the plug prevents it from falling deeper into the drill hole Best possible feedback from the anchor - you can feel that the anchor is sitting perfectly With the appropriate screw for a perfect hold Two component materials for top load values and intelligent functioning depending on the substrate Great feedback (feel-good factor) of the plug. You can feel exactly, when the plug is installed perfectly The narrow plug rim prevents slipping into the drill hole The serrated anti-rotation feature prevents rotation in the drill hole during installation The greater anchorage depth of the DuoPower 6 x 50, 8 x 65 and 10 x 80 means that the plug is especially suited to fixings in hollow building materials, aerated concrete and to bridge plaster Suitable for The DuoPower is suitable for pre-positioned and push-through installation The red expansion wings support the safe expansion and offer additional safety for the grey component The duo of two different materials and its multiple functional abilities (expanding, folding, and knotting) extend the range of applications to additional materials with top loads The required screw length is given by the plug length + fixture thickness + 1x the screw diameter Suitable for wood and chipboard screws, as well as stud screws In the case of fixing boards, the threadless part of the screw must not be longer than the fixture Building materials Concrete Solid brick Solid sand-lime brick Aerated concrete Vertically perforated brick Perforated sand-lime brick Plasterboard Gypsum plasterboard and gypsum fibreboards Hollow blocks made from lightweight concrete Cavity floor slabs made from bricks and concrete or similar Natural stone Chipboard Solid panel made from gypsum Solid brick made from lightweight concrete Application TV consoles Lighting Shelves Mirror cabinets Letter boxes Pictures Fixing blinds Curtain rails Wash basin fixings Plumbing and heating fixings Bath and toilet installations Wall cabinets Range hood ds: dsc: Scope of delivery (per purchase of 8) 8x DuoPower 14x 70 8x Hexagon screw 10.0x 95 kts: DuoPower 14x70 with hexagonal screw kpn: 538259 kpn_dash: kpn_clear: 538259 bkpn: FISCHER 538259 bkpn_clear: FISCHER 538259 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 538259 sr_ns: FISCHER538259
r: 02890454 p: 1.41 pid: 176031 b: FISCHER q: 0 st: lt: 8 ean: 4048962180978 sr: FISCHER 522723 sr_no_br: 522723 sr_no_br_cl: 522723 sr_cl: FISCHER522723 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Length (Wall plug) 140 mm Drill hole depth - mm Material (wall plug) Polyamide (Nylon®) Wall plug type Hammer-in plug With screw Yes Application General type (screw head) T40; HEX 13 mm Drilling diameter 10 mm n: FISCHER 522723 construction plug SXRL 10 x 140 FUS hexagonal head cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The versatile with multiple anchorage depth The fischer frame fixing SXRL FUS is approved along with the fischer hexagon head screw with moulded washer and integrated bit holder TX40 for multiple fixings of non-load-bearing systems in masonry, concrete, and aerated concrete. The two expansion zones in the fixing induce forces equally into perforated masonry, these combine to form a long expansion element in aerated concrete and solid building material. The frame fixing with the safety screw made out of zinc-plated steel is suitable for fixings of façade, ceiling and roof substructures made of metal. ETA assessment with excellent load values: Safe multiple fixings of non-structural systems in concrete and masonry The long expansion element with three anchorage depths makes the SXRL versatile Loads are applied evenly to the building material thanks to the fixing geometry. This means that the fillets are not destroyed in the case of thin-walled building materials Simple to assemble: Ribs prevent plug rotation during installation The long expansion element with multiple anchorage depths of 50, 70 or 90 mm for SXRL 8 and SXRL 10 and 70 or 90 mm for SXRL 14 makes the SXRL an extremely versatile product Through the special geometry of the plug, the retention forces are evenly distributed in the drill hole The approval for single-point fixing in cracked concrete makes the SXRL the designated specialist in concrete particularly for tasks such as the installation of awning roofs and outdoor railings compared to steel anchors When it is to be set deep, the longer ribs prevent the plug from turning during installation The SXRL 14 is additionally approved for applications that are subject to pressure and may be used for façade structures that are installed without wall bracket with a spacing The SXRL with effective lengths up to 240 mm provides the right plug for every application Suitable for The SXRL is suitable for push-through installation In perforated brick masonry a force transmission that protects the substrate is guaranteed through the two expansion zones. The porous block fillets are not crushed by the second expansion zone an therefore serves to transmit the force In aerated concrete and solid building materials, the two expansion zones combine to form one long expansion element, thus providing for a uniform and flat distribution of the load into the substrate Countersunk head screws are recommended for fixing timber constructions. For metal constructions, plug with wide sleeve rim and hexagon head screws with moulded washer Building materials Approved for: Vertically perforated brick Aerated concrete Hollow blocks made from lightweight concrete Perforated sand-lime brick Thermal insulation blocks Solid block made from lightweight and normal weight concrete Solid brick Solid sand-lime brick Concrete >= C12/15 Also suitable for: Natural stone with dense structure Solid panel made from gypsum Application Façade, ceiling and roof substructures made of wood and metal Facade substructures under compression load (e. g. distance installation without a wall bracket) Windows Gates and doors Wardrobes Kitchen hanging cabinets Squared timbers Beams TV consoles Wall covering Metal brackets Metal supports Cable ducts Cable trays ds: dsc: kts: construction plug SXRL 10 x 140 FUS hexagonal head kpn: 522723 kpn_dash: kpn_clear: 522723 bkpn: FISCHER 522723 bkpn_clear: FISCHER 522723 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 522723 sr_ns: FISCHER522723
r: 02890428 p: 1.35 pid: 176022 b: FISCHER q: 0 st: lt: 10 ean: 4048962180787 sr: FISCHER 522703 sr_no_br: 522703 sr_no_br_cl: 522703 sr_cl: FISCHER522703 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Length (Wall plug) 140 mm Drill hole depth - mm Material (wall plug) Polyamide (Nylon®) Wall plug type Hammer-in plug With screw Yes Application General type (screw head) T40 Drilling diameter 10 mm n: FISCHER 522703 construction plug SXRL 10 x 160 T countersunk head cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The versatile with multiple anchorage depth The fischer frame fixing SXRL-T is approved along with the fischer countersunk head screw with TX40 drive for multiple fixings of non-load-bearing systems in masonry, concrete, and aerated concrete. The two expansion zones in the fixing induce forces equally into perforated masonry, these combine to form a long expansion element in aerated concrete and solid building material. The frame fixing with the safety screw made out of zinc-plated steel is suitable for fixings in internal areas such as windows, coat racks, wall cupboards, or TV consoles. ETA assessment with excellent load values: Safe multiple fixings of non-structural systems in concrete and masonry The long expansion element with three anchorage depths makes the SXRL versatile Loads are applied evenly to the building material thanks to the fixing geometry. This means that the fillets are not destroyed in the case of thin-walled building materials Simple to assemble: Ribs prevent plug rotation during installation The long expansion element with multiple anchorage depths of 50, 70 and 90 mm for SXRL 8 and SXRL 10 and 70 and 90 mm for SXRL 14 makes the SXRL an extremely versatile product Through the special geometry of the plug, the retention forces are evenly distributed in the drill hole The approval for single-point fixing in cracked concrete makes the SXRL the designated specialist in concrete particularly for tasks such as the installation of awning roofs and outdoor railings compared to steel anchors When it is to be set deep, the longer ribs prevent the plug from turning during installation The SXRL 14 is additionally approved for applications that are subject to pressure and may be used for façade structures that are installed without wall bracket with a spacing The SXRL with effective lengths up to 290 mm provides the right plug for every application Suitable for The SXRL is suitable for push-through installation In perforated brick masonry a force transmission that protects the substrate is guaranteed through the two expansion zones. The porous block fillets are not crushed by the second expansion zone an therefore serves to transmit the force In aerated concrete and solid building materials, the two expansion zones combine to form one long expansion element, thus providing for a uniform and flat distribution of the load into the substrate Countersunk head screws are recommended for fixing timber constructions. For metal constructions, plug with wide sleeve rim and hexagon head screws with moulded washer Building materials Approved for: Vertically perforated brick Aerated concrete Hollow blocks made from lightweight concrete Perforated sand-lime brick Thermal insulation blocks Solid block made from lightweight and normal weight concrete Solid brick Solid sand-lime brick Concrete >= C12/15 Also suitable for: Natural stone with dense structure Solid panel made from gypsum Application Façade, ceiling and roof substructures made of wood and metal Facade substructures under compression load (e. g. distance installation without a wall bracket) Windows Gates and doors Wardrobes Kitchen hanging cabinets Squared timbers Beams TV consoles Wall covering Metal brackets Metal supports Cable ducts Cable trays ds: dsc: kts: construction plug SXRL 10 x 160 T countersunk head kpn: 522703 kpn_dash: kpn_clear: 522703 bkpn: FISCHER 522703 bkpn_clear: FISCHER 522703 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 522703 sr_ns: FISCHER522703
r: 08134131 p: 1.32 pid: 176380 b: FISCHER q: 80 st: 1 lt: 1 ean: 4048962298871 sr: FISCHER 542590 sr_no_br: 542590 sr_no_br_cl: 542590 sr_cl: FISCHER542590 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Drilling diameter 12 mm Length (Wall plug) 60 mm Drill hole depth - mm Material (wall plug) Plastic Wall plug type Cavity wall plug With screw Yes With collar No Application General n: FISCHER 542590 Hollow wall plug DuoTec 12 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The assembly-friendly solution for heavy loads in sheet metal. A combination of two material components for more power. The flange sleeve reinforces the drill hole and enables significantly higher transverse forces. The curved handle enables obstacle detection before starting assembly. The flexible screw fastening allows the use of screws and hooks with different thread shapes. The fibreglass-reinforced plastic and metal insert (fischer DuoTec 12) ensure the absorption of high tensile and transverse forces in all types of board material. The soft, grey nylon contact side distributes the load over the entire panel surface, thereby minimising any weakening of the load-bearing building material. Common borehole diameters and a short rocker element ensure easy installation even in small or insulated hollow spaces. The white flange sleeve with locking function ensures fast and secure mounting of the plug in the drilled hole. With scale on the band (fischer DuoTec 12) for determining the required screw length (scale value + 20 mm). The unique functioning and the geometry of the fischer DuoTec's plug allow for extremely heavy loads for rocker plugs. This reduces the number of fasteners in multiple fastenings and maximises safety. As part of the DuoLine, the DuoTec consists of two plastic components. The red and hard component of the plug's sleeve enables the uniform distribution of the load, while the grey and white prevent damage to the surface of the board during fastening and thus a load reduction. In applications in board materials, which have a hollow space behind them, the DuoTec is applied as a tumbling plug. In solid building materials, the plug can also be used as a spreader plug. Applications Suspended kitchen cabinets Wall cabinets Bookshelves Wardrobes Handrails Paintings Mirrors Lamps Heavy hanging baskets Building materials Suitable for: Plasterboard Gypsum fibreboard Wooden panels (e.g. OSB, chipboard, MDF, etc.) Steel plate Plastic sheets Concrete hollow brick Also suitable for: Solid materials such as concrete and wood ds: dsc: kts: Hollow wall plug DuoTec 12 kpn: 542590 kpn_dash: kpn_clear: 542590 bkpn: FISCHER 542590 bkpn_clear: FISCHER 542590 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 542590 sr_ns: FISCHER542590
r: 02890453 p: 1.16 pid: 176038 b: FISCHER q: 0 st: lt: 8 ean: 4048962180961 sr: FISCHER 522721 sr_no_br: 522721 sr_no_br_cl: 522721 sr_cl: FISCHER522721 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Length (Wall plug) 120 mm Drill hole depth - mm Material (wall plug) Polyamide (Nylon®) Wall plug type Hammer-in plug With screw Yes Application General type (screw head) T40; HEX 13 mm Drilling diameter 10 mm n: FISCHER 522721 construction plug SXRL 10 x 120 FUS hexagonal head cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The versatile with multiple anchorage depth The fischer frame fixing SXRL FUS is approved along with the fischer hexagon head screw with moulded washer and integrated bit holder TX40 for multiple fixings of non-load-bearing systems in masonry, concrete, and aerated concrete. The two expansion zones in the fixing induce forces equally into perforated masonry, these combine to form a long expansion element in aerated concrete and solid building material. The frame fixing with the safety screw made out of zinc-plated steel is suitable for fixings of façade, ceiling and roof substructures made of metal. ETA assessment with excellent load values: Safe multiple fixings of non-structural systems in concrete and masonry The long expansion element with three anchorage depths makes the SXRL versatile Loads are applied evenly to the building material thanks to the fixing geometry. This means that the fillets are not destroyed in the case of thin-walled building materials Simple to assemble: Ribs prevent plug rotation during installation The long expansion element with multiple anchorage depths of 50, 70 or 90 mm for SXRL 8 and SXRL 10 and 70 or 90 mm for SXRL 14 makes the SXRL an extremely versatile product Through the special geometry of the plug, the retention forces are evenly distributed in the drill hole The approval for single-point fixing in cracked concrete makes the SXRL the designated specialist in concrete particularly for tasks such as the installation of awning roofs and outdoor railings compared to steel anchors When it is to be set deep, the longer ribs prevent the plug from turning during installation The SXRL 14 is additionally approved for applications that are subject to pressure and may be used for façade structures that are installed without wall bracket with a spacing The SXRL with effective lengths up to 240 mm provides the right plug for every application Suitable for The SXRL is suitable for push-through installation In perforated brick masonry a force transmission that protects the substrate is guaranteed through the two expansion zones. The porous block fillets are not crushed by the second expansion zone an therefore serves to transmit the force In aerated concrete and solid building materials, the two expansion zones combine to form one long expansion element, thus providing for a uniform and flat distribution of the load into the substrate Countersunk head screws are recommended for fixing timber constructions. For metal constructions, plug with wide sleeve rim and hexagon head screws with moulded washer Building materials Approved for: Vertically perforated brick Aerated concrete Hollow blocks made from lightweight concrete Perforated sand-lime brick Thermal insulation blocks Solid block made from lightweight and normal weight concrete Solid brick Solid sand-lime brick Concrete >= C12/15 Also suitable for: Natural stone with dense structure Solid panel made from gypsum Application Façade, ceiling and roof substructures made of wood and metal Facade substructures under compression load (e. g. distance installation without a wall bracket) Windows Gates and doors Wardrobes Kitchen hanging cabinets Squared timbers Beams TV consoles Wall covering Metal brackets Metal supports Cable ducts Cable trays ds: dsc: kts: construction plug SXRL 10 x 120 FUS hexagonal head kpn: 522721 kpn_dash: kpn_clear: 522721 bkpn: FISCHER 522721 bkpn_clear: FISCHER 522721 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 522721 sr_ns: FISCHER522721
