r: 02962434 p: 0.69 pid: 176124 b: FISCHER q: 0 st: lt: 8 ean: 4048962276893 sr: FISCHER 540116 sr_no_br: 540116 sr_no_br_cl: 540116 sr_cl: FISCHER540116 sr_dash: sold: 414 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Length (Wall plug) 120 mm Drill hole depth - mm Material (wall plug) Polyamide (Nylon®) Wall plug type Hammer-in plug With screw Yes Application General type (screw head) T30 Drilling diameter 8 mm n: FISCHER 540116 construction plug SXRL 8 x 120 T countersunk head cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The versatile with multiple anchorage depth The fischer frame fixing SXRL with up to three anchorage depths is approved for multiple fixings of non-structural systems in concrete, masonry and aerated concrete with the fischer countersunk screw. The SXRL 10 has also an approval for single-point fixing in concrete and the SXRL 14 for the stand for the stand-off installation of façades under a compression load. In perforated brick masonry, the two expansion zones of the plug apply force evenly; in aerated concrete and solid building materials, they unite to form one long expansion element. This ensures excellent load values. The extensive assortment with diameters of 8, 10 and 14 mm and anchor lengths of up to 360 mm enable diverse applications. The SXRL with the countersunk head screw is particularly recommended for fixing wood constructions. ETA assessment with excellent load values: Safe multiple fixings of non-structural systems in concrete and masonry The long expansion element with three anchorage depths makes the SXRL versatile Loads are applied evenly to the building material thanks to the fixing geometry. This means that the fillets are not destroyed in the case of thin-walled building materials Simple to assemble: Ribs prevent plug rotation during installation The long expansion element with multiple anchorage depths of 50, 70 and 90 mm for SXRL 8 and SXRL 10 and 70 and 90 mm for SXRL 14 makes the SXRL an extremely versatile product Through the special geometry of the plug, the retention forces are evenly distributed in the drill hole The approval for single-point fixing in cracked concrete makes the SXRL the designated specialist in concrete particularly for tasks such as the installation of awning roofs and outdoor railings compared to steel anchors When it is to be set deep, the longer ribs prevent the plug from turning during installation The SXRL 14 is additionally approved for applications that are subject to pressure and may be used for façade structures that are installed without wall bracket with a spacing The SXRL with effective lengths up to 290 mm provides the right plug for every application Suitable for The SXRL is suitable for push-through installation In perforated brick masonry a force transmission that protects the substrate is guaranteed through the two expansion zones. The porous block fillets are not crushed by the second expansion zone an therefore serves to transmit the force In aerated concrete and solid building materials, the two expansion zones combine to form one long expansion element, thus providing for a uniform and flat distribution of the load into the substrate Countersunk head screws are recommended for fixing timber constructions. For metal constructions, plug with wide sleeve rim and hexagon head screws with moulded washer Building materials Approved for: Vertically perforated brick Aerated concrete Hollow blocks made from lightweight concrete Perforated sand-lime brick Thermal insulation blocks Solid block made from lightweight and normal weight concrete Solid brick Solid sand-lime brick Concrete >= C12/15 Also suitable for: Natural stone with dense structure Solid panel made from gypsum Application Façade, ceiling and roof substructures made of wood and metal Facade substructures under compression load (e. g. distance installation without a wall bracket) Windows Gates and doors Wardrobes Kitchen hanging cabinets Squared timbers Beams TV consoles Wall covering Metal brackets Metal supports Cable ducts Cable trays ds: dsc: kts: construction plug SXRL 8 x 120 T countersunk head kpn: 540116 kpn_dash: kpn_clear: 540116 bkpn: FISCHER 540116 bkpn_clear: FISCHER 540116 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 540116 sr_ns: FISCHER540116
r: 87030020 p: 1.46 pid: 75132 b: FISCHER q: 0 st: lt: 4 ean: 4006209504932 sr: FISCHER 50493 sr_no_br: 50493 sr_no_br_cl: 50493 sr_cl: FISCHER50493 sr_dash: sold: 408.8 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm With screw No Drilling diameter 14 mm type (screw head) Application Aerated concrete Wall plug type Universal plug Material (wall plug) Polyamide (Nylon®) Drill hole depth 90 mm Length (Wall plug) 75 mm n: FISCHER 50493 aerated concrete plug GB 14 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The special plug for different fixings in aerated concrete. The fischer Aircrete anchor GB 14 is a special anchor for different fixings in aerated concrete. The GB, made from high-quality nylon, is hammered in rotary mode after pre-drilling. The characteristic outer ribs ensure an interlocking connection between the building material and anchor. The fischer Aircrete anchor GB is ideal for fixing façade and roof constructions as well as railings in aerated concrete. Building Authority approval for safety-relevant applications Optimum pressure distribution and high load-bearing capacity. Spiral outer ribs cut a positive fit in the aerated concrete No setting tool necessary: simply hammer in using the hammer Approved with the fischer safety screw The general building approval guarantees approved safety for use in safety-relevant applications The spiral-shaped outer ribs cut a positive fit in the soft building material, thus ensuring the best pressure distribution and load-bearing capacity Can be applied with a hammer - there is no need for special tools, thus saving time and money for the installation The GB can also be used safely outside (e. g. in façade installation) when combined with the approved fischer safety screw in A4 Suitable for The GB is suitable for pre-positioned installation The spiral-shaped outer ribs ensure a positive fit connection between the building material and anchor The required screw length is given by: Anchor length + fixture thickness + 1 x screw diameter The GB 10 must be used with fischer safety screws to fulfil the approval and to achieve the maximum load-bearing capacity Use rotary drilling to create the drill hole Can be used in unplastered aerated concrete Building materials Approved for (GB 10) resp. suitable for (GB 8 and GB 14): Aerated concrete >= PB2, PP2 Also suitable for: Aerated concrete and ceiling panels of compressive strength >= 3. 3 Application Light cable trays Pipelines Guard rails Façade and roof constructions made of wood and metal Light canopy brackets Letter boxes Trellis ds: dsc: kts: aerated concrete plug GB 14 kpn: 50493 kpn_dash: kpn_clear: 50493 bkpn: FISCHER 50493 bkpn_clear: FISCHER 50493 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 50493 sr_ns: FISCHER50493
r: 87990771 p: 0.25 pid: 75960 b: FISCHER q: 0 st: lt: 1 ean: 4006209778715 sr: FISCHER 77871 sr_no_br: 77871 sr_no_br_cl: 77871 sr_cl: FISCHER77871 sr_dash: sold: 387.5 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Length (Wall plug) 60 mm Drill hole depth 75 mm Material (wall plug) PA6 - Polyamide 6 (Nylon® 6) Wall plug type Universal plug With screw No With collar No Application General type (screw head) Drilling diameter 10 mm n: FISCHER 77871 universal plug UX 10 x 60 without collar cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The nylon plug for all building materials. The fischer universal plug UX is a plastic plug made from high-quality nylon. The universal plug expands in solid building materials and knots in hollow and panel building materials for maximum hold. This makes the fischer UX always the right choice - even if the for unknown building materials. The edge prevents it from slipping deeper during installation. In the version without edge, and larger anchorage depths, the fischer universal plug UX is suitable for push-through installation. The fischer universal plug UX is recommended, for example, for fixing lighting, curtain rails, lightweight cupboards and skirting. The fixing sets with screws, eye screws and hooks provide the optimum solution for almost all applications. Plug holds in all building materials Plug expands in solid building materials Maximum hold in solid and hollow building materials due to knotting Optimum screw guidance due to slanting connection bridges Installation safety due to anti-rotation lock The universal operating principle (knotting or expanding) allows for use in all solid, hollow and board building materials. Thus the UX is the correct choice for unknown base materials The UX's angled connection ridges allow for optimum screw guidance. Serrated anti-rotation locks prevent rotation in the drill hole. This guarantees the greatest possible installation safety Fixing sets with screws, eye screws and hooks provide the right solution for all applications Suitable for The UX with rim is suitable for pre-positioned installation; the UX without rim is suitable for push-through installation Turning in the screw causes the UX to expand in the solid building material and to knot within the cavity The required screw length is given by the plug length + fixture thickness + 1 x screw diameter Suitable for wood and chipboard screws, as well as stud screws In the case of board building materials, the threadless part of the screw must not be longer than the fixture, and the UX with rim is to be used The edge distance must be at least one plug length Building materials Concrete Gypsum plasterboard and gypsum fibreboards Vertically perforated brick Hollow blocks made from lightweight concrete Cavity floor slabs made from bricks and concrete Perforated sand-lime brick Solid sand-lime brick Natural stone Aerated concrete Chipboard Solid panel made from gypsum Solid brick made from lightweight concrete Solid brick Application Pictures Lighting Skirting Light cabinets Towel rails Mirror cabinets Curtain rails Wash basin fixings TV consoles Plumbing and heating fixings ds: dsc: kts: universal plug UX 10 x 60 without collar kpn: 77871 kpn_dash: kpn_clear: 77871 bkpn: FISCHER 77871 bkpn_clear: FISCHER 77871 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 77871 sr_ns: FISCHER77871
r: 02062357 p: 0.84 pid: 20598 b: FISCHER q: 0 st: lt: 8 ean: 4006209503485 sr: FISCHER 50348 sr_no_br: 50348 sr_no_br_cl: 50348 sr_cl: FISCHER50348 sr_dash: sold: 378 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm With screw Yes Drilling diameter 10 mm Application General With collar Yes type (screw head) PZ3 Wall plug type Hammer-in plug Material (wall plug) Polyamide (Nylon®) Drill hole depth - mm Length (Wall plug) 160 mm n: FISCHER 50348 nail plug N 10 x 160/110 S with countersunk head cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The hammer-in plug for simple, fast and economic installation. The fischer Hammerfix N-S with countersunk head consists of a high-quality nylon plug and a zinc-plated nail screw. These are already pre-fitted for quick assembly. The Hammerfix is led through the component in the time-saving through-type installation. When driving in the nail screw, the fixing sleeve expands and anchors itself securely in the building material. The fischer Hammerfix N-S with countersunk head is ideal for fixing timber constructions in all building materials in internal areas. Fast Hammerset installation saves time: ideal for series installation Simple and secure installation: Integrated hammer-in stop prevents premature anchor spreading Subsequent dismantling of the nail screw with a cross-slot recess is possible With countersunk head The rapid hammerset installation reduces the amount of time required and allows for an economic series installation The integrated hammer-in stop prevents the plug from expanding prematurely (jamming), thus enabling a problem-free installation Together with the cross-slot recess, the thread of the nail screw allows the screw to be removed, thus allowing for subsequent dismantling The wide range of diameters and usage lengths provides the correct plug for every fixing Suitable for Suitable for push-through installation When hammered in, the nail screw causes the plug to expand in two directions, thus providing a secure anchoring in the building material Countersunk head plugs are recommended for the installation of timber constructions; in the case of metal constructions, use flat-head plugs, and use pan-head plugs for long holes Building materials Concrete Solid sand-lime brick Building brick Natural stone Solid brick made from lightweight concrete Aerated concrete Solid panel made from gypsum Application Substructures made of wood Wall connection or plaster profiles Cable and pipe clips Perforated tapes ds: dsc: kts: nail plug N 10 x 160/110 S with countersunk head kpn: 50348 kpn_dash: kpn_clear: 50348 bkpn: FISCHER 50348 bkpn_clear: FISCHER 50348 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 50348 sr_ns: FISCHER50348
r: 02062339 p: 0.117 pid: 21235 b: FISCHER q: 350 st: 1 lt: 1 ean: 4006209503539 sr: FISCHER 50353 sr_no_br: 50353 sr_no_br_cl: 50353 sr_cl: FISCHER50353 sr_dash: sold: 304.2 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm With screw Yes Drilling diameter 6 mm Application General With collar Yes type (screw head) PZ2 Wall plug type Hammer-in plug Material (wall plug) Polyamide (Nylon®) Drill hole depth - mm Length (Wall plug) 80 mm n: FISCHER 50353 nail plug N 6 x 80/50 S with countersunk head cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The hammer-in plug for simple, fast and economic installation. The fischer Hammerfix N-S with countersunk head consists of a high-quality nylon plug and a zinc-plated nail screw. These are already pre-fitted for quick assembly. The Hammerfix is led through the component in the time-saving through-type installation. When driving in the nail screw, the fixing sleeve expands and anchors itself securely in the building material. The fischer Hammerfix N-S with countersunk head is ideal for fixing timber constructions in all building materials in internal areas. Fast Hammerset installation saves time: ideal for series installation Simple and secure installation: Integrated hammer-in stop prevents premature anchor spreading Subsequent dismantling of the nail screw with a cross-slot recess is possible With countersunk head The rapid hammerset installation reduces the amount of time required and allows for an economic series installation The integrated hammer-in stop prevents the plug from expanding prematurely (jamming), thus enabling a problem-free installation Together with the cross-slot recess, the thread of the nail screw allows the screw to be removed, thus allowing for subsequent dismantling The wide range of diameters and usage lengths provides the correct plug for every fixing Suitable for Suitable for push-through installation When hammered in, the nail screw causes the plug to expand in two directions, thus providing a secure anchoring in the building material Countersunk head plugs are recommended for the installation of timber constructions; in the case of metal constructions, use flat-head plugs, and use pan-head plugs for long holes Building materials Concrete Solid sand-lime brick Building brick Natural stone Solid brick made from lightweight concrete Aerated concrete Solid panel made from gypsum Application Substructures made of wood Wall connection or plaster profiles Cable and pipe clips Perforated tapes ds: dsc: kts: nail plug N 6 x 80/50 S with countersunk head kpn: 50353 kpn_dash: kpn_clear: 50353 bkpn: FISCHER 50353 bkpn_clear: FISCHER 50353 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 50353 sr_ns: FISCHER50353
r: 02824742 p: 0.26 pid: 176008 b: FISCHER q: 100 st: 1 lt: 1 ean: 4048962293326 sr: FISCHER 541906 sr_no_br: 541906 sr_no_br_cl: 541906 sr_cl: FISCHER541906 sr_dash: sold: 273 p_range: none type: standard act: 1 avo: 1 av: Length 110 mm n: FISCHER 541906 tension sleeve FNH 8 x 110 cn: NAIL SLEEVE cn2: NAIL SLEEVE cn_clear: NAILSLEEVE d: Product description The user-friendly spring sleeve for light fixings in solid building materials. The fischer nail sleeve FNH is a user-friendly spring sleeve made out of corrosion-resistant steel. The nail sleeve is driven into the through-type installation in a time-saving manner with the hammer, and expands along its whole length in the drill hole. This allows timber and metal sub-constructions, metal profiles, and squared timbers to be fixed in solid building materials in a cost-effective manner in interior areas and temporarily in external areas. Knock in with the hammer - finished Fixing without screws and plugs. This saves time and lowers costs No plugs or screws are required for the one-piece nail sleeve. This guarantees a simple and easy installation The geometry of the nail sleeve makes it easy to push it into the drill hole. This saves time and money Suitable for The FNH nail sleeve is suitable for push-through installation The nail sleeve is hammered in and expands its entire length in the hole FNH is suitable for interior applications and for temporary external fixings Building materials Concrete Solid sand-lime brick Natural stone with dense structure Solid brick Application Squared timbers Substructures made of wood and metal Metal profiles ds: dsc: kts: tension sleeve FNH 8 x 110 kpn: 541906 kpn_dash: kpn_clear: 541906 bkpn: FISCHER 541906 bkpn_clear: FISCHER 541906 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Clamping sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer clamping sleeve sr_no_br_cl_ns: 541906 sr_ns: FISCHER541906
r: 03297797 p: 0.104 pid: 176166 b: FISCHER q: 3250 st: 1 lt: 1 ean: 4048962239867 sr: FISCHER 535456 sr_no_br: 535456 sr_no_br_cl: 535456 sr_cl: FISCHER535456 sr_dash: sold: 270.4 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm With screw No Drilling diameter 10 mm type (screw head) Application General Wall plug type Universal plug Material (wall plug) PA6 - Polyamide 6 (Nylon® 6) Drill hole depth 60 mm Length (Wall plug) 50 mm n: FISCHER 535456 DuoPower 10x50 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The duo of power and intelligence The fischer DuoPower offers very good hold values as a result of its 2 components: Depending on the building material, the grey components made from high quality nylon automatically activates the optimum product function (expansion, folding, knotting) for the best hold. The expansion wings of the red component support the secure expansion and offer additional security to the grey component. Easy screwing-in of the screw and correct "tightening" to close. No over-tightening of the screw. The preshaped edge on the plug head prevents the plug from slipping into the drill hole. Combination of two material components for more performance Secure functions for solid (expansion) and hollow and panel building materials (folding/knotting) Easy installation: narrow edge of the plug prevents it from falling deeper into the drill hole Best possible feedback from the anchor - you can feel that the anchor is sitting perfectly Two component materials for top load values and intelligent functioning depending on the substrate Great feedback (feel-good factor) of the plug. You can feel exactly, when the plug is installed perfectly The narrow plug rim prevents slipping into the drill hole The serrated anti-rotation feature prevents rotation in the drill hole during installation The greater anchorage depth of the DuoPower 6 x 50, 8 x 65 and 10 x 80 means that the plug is especially suited to fixings in hollow building materials, aerated concrete and to bridge plaster Suitable for The DuoPower is suitable for pre-positioned and push-through installation The red expansion wings support the safe expansion and offer additional safety for the grey component The duo of two different materials and its multiple functional abilities (expanding, folding, and knotting) extend the range of applications to additional materials with top loads The required screw length is given by the plug length + fixture thickness + 1x the screw diameter Suitable for wood and chipboard screws, as well as stud screws In the case of fixing boards, the threadless part of the screw must not be longer than the fixture Building materials Concrete Solid brick Solid sand-lime brick Aerated concrete Vertically perforated brick Perforated sand-lime brick Plasterboard Gypsum plasterboard and gypsum fibreboards Hollow blocks made from lightweight concrete Cavity floor slabs made from bricks and concrete or similar Natural stone Chipboard Solid panel made from gypsum Solid brick made from lightweight concrete Application TV consoles Lighting Shelves Mirror cabinets Letter boxes Pictures Fixing blinds Curtain rails Wash basin fixings Plumbing and heating fixings Bath and toilet installations Wall cabinets Range hood ds: dsc: Scope of delivery (per purchase of 50) 50x DuoPower 10x 50 kts: DuoPower 10x50 kpn: 535456 kpn_dash: kpn_clear: 535456 bkpn: FISCHER 535456 bkpn_clear: FISCHER 535456 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 535456 sr_ns: FISCHER535456
r: 02062343 p: 0.31 pid: 21989 b: FISCHER q: 0 st: lt: 6 ean: 4006209503591 sr: FISCHER 50359 sr_no_br: 50359 sr_no_br_cl: 50359 sr_cl: FISCHER50359 sr_dash: sold: 263.5 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm With screw Yes Drilling diameter 8 mm Application General With collar Yes type (screw head) PZ3 Wall plug type Hammer-in plug Material (wall plug) Polyamide (Nylon®) Drill hole depth - mm Length (Wall plug) 120 mm n: FISCHER 50359 nail plug N 8 x 120/80 S with countersunk head cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The hammer-in plug for simple, fast and economic installation. The fischer Hammerfix N-S with countersunk head consists of a high-quality nylon plug and a zinc-plated nail screw. These are already pre-fitted for quick assembly. The Hammerfix is led through the component in the time-saving through-type installation. When driving in the nail screw, the fixing sleeve expands and anchors itself securely in the building material. The fischer Hammerfix N-S with countersunk head is ideal for fixing timber constructions in all building materials in internal areas. Fast Hammerset installation saves time: ideal for series installation Simple and secure installation: Integrated hammer-in stop prevents premature anchor spreading Subsequent dismantling of the nail screw with a cross-slot recess is possible With countersunk head The rapid hammerset installation reduces the amount of time required and allows for an economic series installation The integrated hammer-in stop prevents the plug from expanding prematurely (jamming), thus enabling a problem-free installation Together with the cross-slot recess, the thread of the nail screw allows the screw to be removed, thus allowing for subsequent dismantling The wide range of diameters and usage lengths provides the correct plug for every fixing Suitable for Suitable for push-through installation When hammered in, the nail screw causes the plug to expand in two directions, thus providing a secure anchoring in the building material Countersunk head plugs are recommended for the installation of timber constructions; in the case of metal constructions, use flat-head plugs, and use pan-head plugs for long holes Building materials Concrete Solid sand-lime brick Building brick Natural stone Solid brick made from lightweight concrete Aerated concrete Solid panel made from gypsum Application Substructures made of wood Wall connection or plaster profiles Cable and pipe clips Perforated tapes ds: dsc: kts: nail plug N 8 x 120/80 S with countersunk head kpn: 50359 kpn_dash: kpn_clear: 50359 bkpn: FISCHER 50359 bkpn_clear: FISCHER 50359 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 50359 sr_ns: FISCHER50359
r: 03297777 p: 0.26 pid: 176147 b: FISCHER q: 100 st: 1 lt: 1 ean: 4048962262193 sr: FISCHER 538252 sr_no_br: 538252 sr_no_br_cl: 538252 sr_cl: FISCHER538252 sr_dash: sold: 253.5 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm With screw No Drilling diameter 10 mm type (screw head) Application General Wall plug type Universal plug Material (wall plug) PA6 - Polyamide 6 (Nylon® 6) Drill hole depth 100 mm Length (Wall plug) 80 mm n: FISCHER 538252 DuoPower 10x80 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The duo of power and intelligence The fischer DuoPower offers very good hold values as a result of its 2 components: Depending on the building material, the grey components made from high quality nylon automatically activates the optimum product function (expansion, folding, knotting) for the best hold. The expansion wings of the red component support the secure expansion and offer additional security to the grey component. Easy screwing-in of the screw and correct "tightening" to close. No over-tightening of the screw. The preshaped edge on the plug head prevents the plug from slipping into the drill hole. Combination of two material components for more performance Secure functions for solid (expansion) and hollow and panel building materials (folding/knotting) Easy installation: narrow edge of the plug prevents it from falling deeper into the drill hole Best possible feedback from the anchor - you can feel that the anchor is sitting perfectly Two component materials for top load values and intelligent functioning depending on the substrate Great feedback (feel-good factor) of the plug. You can feel exactly, when the plug is installed perfectly The narrow plug rim prevents slipping into the drill hole The serrated anti-rotation feature prevents rotation in the drill hole during installation The greater anchorage depth of the DuoPower 6 x 50, 8 x 65 and 10 x 80 means that the plug is especially suited to fixings in hollow building materials, aerated concrete and to bridge plaster Suitable for The DuoPower is suitable for pre-positioned and push-through installation The red expansion wings support the safe expansion and offer additional safety for the grey component The duo of two different materials and its multiple functional abilities (expanding, folding, and knotting) extend the range of applications to additional materials with top loads The required screw length is given by the plug length + fixture thickness + 1x the screw diameter Suitable for wood and chipboard screws, as well as stud screws In the case of fixing boards, the threadless part of the screw must not be longer than the fixture Building materials Concrete Solid brick Solid sand-lime brick Aerated concrete Vertically perforated brick Perforated sand-lime brick Plasterboard Gypsum plasterboard and gypsum fibreboards Hollow blocks made from lightweight concrete Cavity floor slabs made from bricks and concrete or similar Natural stone Chipboard Solid panel made from gypsum Solid brick made from lightweight concrete Application TV consoles Lighting Shelves Mirror cabinets Letter boxes Pictures Fixing blinds Curtain rails Wash basin fixings Plumbing and heating fixings Bath and toilet installations Wall cabinets Range hood ds: dsc: Scope of delivery (per purchase of 25) 25x DuoPower 10x 80 kts: DuoPower 10x80 kpn: 538252 kpn_dash: kpn_clear: 538252 bkpn: FISCHER 538252 bkpn_clear: FISCHER 538252 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 538252 sr_ns: FISCHER538252
r: 87030008 p: 0.31 pid: 75646 b: FISCHER q: 80 st: 1 lt: 1 ean: 4006209501146 sr: FISCHER 50114 sr_no_br: 50114 sr_no_br_cl: 50114 sr_cl: FISCHER50114 sr_dash: sold: 229.4 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Length (Wall plug) 75 mm Drill hole depth 90 mm Material (wall plug) PA6 - Polyamide 6 (Nylon® 6) Wall plug type Universal plug With screw No Application General type (screw head) Drilling diameter 14 mm n: FISCHER 50114 plug S 14 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The installation-friendly nylon plug with 2-way expansion. The fischer expansion plug S is the original and the proven classic millions of times for decades. The plastic fixing is made entirely from high-quality nylon. As a result, the plug is particularly robust during installation and guarantees permanent security. As the plug only expands in two directions, it is possible to direct the expansion forces so that they run parallel to the edge of the building material by turning the plug. This prevents the building material from spalling due to fixings close to the edge. Wood or chipboard screws can be used to fix the object. The fischer expansion plug S is ideal for fixing in concrete and solid masonry. The rimless plug is suitable for pre-positioned and push-through installation Simple insertion due to the ease of pushing in the plug The anti-rotation lock prevents rotation in the drill hole. This guarantees a high degree of safety during installation The rimless plug sleeve allows for the plug to be set as deep as required below the plaster to the bearing substrate to achieve the maximum load-bearing capacity As the plug only expands in two directions, it is possible to direct the expansion forces so that they run parallel to the edge of the building material by turning the plug. This allows for smaller edge distances The slimline plug geometry makes it easy to push the plug into the drill hole. For a fast and simple installation The anti-rotation lock prevents the plug rotating in the drill hole, thus guaranteeing a high level of installation safety Suitable for The expansion plug S is suitable for pre-positioned and push-through installation When turning in the screw, the expansion plug S expands in two directions, thus providing a secure anchoring in the building material The required screw length is given by the plug length + plaster and/or insulation material thickness + fixture thickness + 1 x screw diameter Suitable for wood and chipboard screws The edge distance must be at least one plug length For installations close to the edge, turn the plug so that the expansion force acts parallel to the edge Building materials Concrete Solid sand-lime brick Natural stone with dense structure Solid brick made from lightweight concrete Solid brick Application Pictures Lighting Skirting Light shelves Mirror cabinets Letter boxes Motion detectors Information boards Curtain rails Electrical installations ds: dsc: kts: plug S 14 kpn: 50114 kpn_dash: kpn_clear: 50114 bkpn: FISCHER 50114 bkpn_clear: FISCHER 50114 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 50114 sr_ns: FISCHER50114
r: 02890685 p: 18.677 pid: 176074 b: FISCHER q: 4 st: 1 lt: 1 ean: 4048962245639 sr: FISCHER 535973 sr_no_br: 535973 sr_no_br_cl: 535973 sr_cl: FISCHER535973 sr_dash: sold: 186.77 p_range: none type: standard act: 1 avo: 1 av: n: FISCHER 535973 Red-Box DuoPower plug set (280 pcs.) cn: WALL PLUG ASSORTMENT cn2: WALL PLUG ASSORTMENT cn_clear: WALLPLUGASSORTMENT d: Product description The Duo of power and intelligence The Red-Box, made from high-quality and impact-proof plastic, is ideal for workshop and construction site. The transparent lid provides an overview at a glance. The fischer Red-Box closes securely and can be refilled with plugs. The fischer Red-Box DuoPower contains presorted 30 DuoPower 5 x 25, 140 DuoPower 6 x 30, 80 DuoPower 8 x 40 as well as 30 DuoPower 10 x 50. No searching: most important diameters are pre-sorted Transparent cover: Overview at a glance High-quality assortment box for refilling ds: dsc: Scope of delivery 30x DuoPower 5x25 140x DuoPower 6x30 80x DuoPower 8x40 30x DuoPower 10x50 kts: Red-Box DuoPower plug set (280 pcs.) kpn: 535973 kpn_dash: kpn_clear: 535973 bkpn: FISCHER 535973 bkpn_clear: FISCHER 535973 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug assortment | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug assortment sr_no_br_cl_ns: 535973 sr_ns: FISCHER535973
r: 03308130 p: 0.03 pid: 176236 b: FISCHER q: 21600 st: 1 lt: 1 ean: 4048962480825 sr: FISCHER 568006 sr_no_br: 568006 sr_no_br_cl: 568006 sr_cl: FISCHER568006 sr_dash: sold: 177 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm With screw No Drilling diameter 6 mm type (screw head) Application General Wall plug type Universal plug Material (wall plug) PA6 - Polyamide 6 (Nylon® 6) Drill hole depth - mm Length (Wall plug) 30 mm n: FISCHER 568006 plug SX Plus 6 x 30 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The specialist for solid building materials. Thanks to its 4-way expansion, the fischer SX Plus expansion plug is the specialist for solid building materials such as concrete, sand-lime brick and masonry. The special fixing blades ensure pre-fixation of the screw, which means that it does not have to be additionally held in place for overhead applications. This screw fixation allows the user a flexible and comfortable setting process. The flexibel plug edge also prevents the plug from slipping deeper into the drill hole for secure installation. The high-quality nylon material guarantees a permanently secure hold in a wide range of solid and perforated building materials. 4-Way expansion for high load values Fixing blades for screw fixation and flexible mounting Installation of the plug possible with little effort Plug edge prevents slipping deeper into the drill hole Noticeable tightening torque prevents overtightening of the screw The 4-way expansion ensures optimum force transmission into the building material and guarantees high holding values in solid and perforated building materials The special fixing wings ensure pre-fixation of the screw, leaving both of the user's hands free during the setting process The expansion-free plug neck prevents the creation of expansion forces on the material surface whilst screwing in the screw. This helps to prevent damage to tiles and plaster The special shape of the plug makes it easy to insert into the drill hole with just a few hammer blows The pronounced edge of the plug prevents it from slipping deeper into the drill hole and enables secure installation Due to the noticeable tightening torque, the user automatically recognizes when the screw is properly installed and thus prevents overtightening of the screw Suitable for The SX Plus is suitable for pre-positioned and push-through installation When the plug is inserted, the fixing wings fold inwards. This locks the screw in place when it is inserted into the plug and prevents it from falling out, which is particularly helpful in overhead applications When the screw is tightened, the SX Plus expands in four directions and thus anchors itself securely in the building material The anti-rotation lock prevents the plug from twisting and allows for easy installation Suitable for wood and chipboard screws, as well as stud screws The required screw length is given by the plug length + fixture thickness + the screw diameter Building materials Concrete Solid brick Solid sand-lime brick Aerated concrete Vertically perforated brick Perforated sand-lime brick Solid stone of leightweight concrete Hollow block of leightweight concrete Natural stone Hollow brick & concrete ceilings Solid gypsum boards Application Lamps Wardrobes Motion detectors Skirting boards Light wall shelves Mirror cabinets Mailboxes TV consoles Trellis Folding shutters Fire detector ds: dsc: Scope of delivery (per purchase of 100) 100x SX Plus 6x 30 kts: plug SX Plus 6 x 30 kpn: 568006 kpn_dash: kpn_clear: 568006 bkpn: FISCHER 568006 bkpn_clear: FISCHER 568006 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 568006 sr_ns: FISCHER568006
r: 03297778 p: 0.166 pid: 176133 b: FISCHER q: 1150 st: 1 lt: 1 ean: 4048962262209 sr: FISCHER 538253 sr_no_br: 538253 sr_no_br_cl: 538253 sr_cl: FISCHER538253 sr_dash: sold: 170.15 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm With screw No Drilling diameter 12 mm type (screw head) Application General Wall plug type Universal plug Material (wall plug) PA6 - Polyamide 6 (Nylon® 6) Drill hole depth 90 mm Length (Wall plug) 60 mm n: FISCHER 538253 DuoPower 12x60 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The duo of power and intelligence The fischer DuoPower offers very good hold values as a result of its 2 components: Depending on the building material, the grey components made from high quality nylon automatically activates the optimum product function (expansion, folding, knotting) for the best hold. The expansion wings of the red component support the secure expansion and offer additional security to the grey component. Easy screwing-in of the screw and correct "tightening" to close. No over-tightening of the screw. The preshaped edge on the plug head prevents the plug from slipping into the drill hole. Combination of two material components for more performance Secure functions for solid (expansion) and hollow and panel building materials (folding/knotting) Easy installation: narrow edge of the plug prevents it from falling deeper into the drill hole Best possible feedback from the anchor - you can feel that the anchor is sitting perfectly Two component materials for top load values and intelligent functioning depending on the substrate Great feedback (feel-good factor) of the plug. You can feel exactly, when the plug is installed perfectly The narrow plug rim prevents slipping into the drill hole The serrated anti-rotation feature prevents rotation in the drill hole during installation The greater anchorage depth of the DuoPower 6 x 50, 8 x 65 and 10 x 80 means that the plug is especially suited to fixings in hollow building materials, aerated concrete and to bridge plaster Suitable for The DuoPower is suitable for pre-positioned and push-through installation The red expansion wings support the safe expansion and offer additional safety for the grey component The duo of two different materials and its multiple functional abilities (expanding, folding, and knotting) extend the range of applications to additional materials with top loads The required screw length is given by the plug length + fixture thickness + 1x the screw diameter Suitable for wood and chipboard screws, as well as stud screws In the case of fixing boards, the threadless part of the screw must not be longer than the fixture Building materials Concrete Solid brick Solid sand-lime brick Aerated concrete Vertically perforated brick Perforated sand-lime brick Plasterboard Gypsum plasterboard and gypsum fibreboards Hollow blocks made from lightweight concrete Cavity floor slabs made from bricks and concrete or similar Natural stone Chipboard Solid panel made from gypsum Solid brick made from lightweight concrete Application TV consoles Lighting Shelves Mirror cabinets Letter boxes Pictures Fixing blinds Curtain rails Wash basin fixings Plumbing and heating fixings Bath and toilet installations Wall cabinets Range hood ds: dsc: Scope of delivery (per purchase of 25) 25x DuoPower 12x 60 kts: DuoPower 12x60 kpn: 538253 kpn_dash: kpn_clear: 538253 bkpn: FISCHER 538253 bkpn_clear: FISCHER 538253 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 538253 sr_ns: FISCHER538253
r: 03297782 p: 0.36 pid: 176181 b: FISCHER q: 0 st: lt: 5 ean: 4048962262223 sr: FISCHER 538255 sr_no_br: 538255 sr_no_br_cl: 538255 sr_cl: FISCHER538255 sr_dash: sold: 126 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm With screw Yes Drilling diameter 6 mm Application General type (screw head) PZ2 Wall plug type Universal plug Material (wall plug) PA6 - Polyamide 6 (Nylon® 6) Drill hole depth 65 mm Length (Wall plug) 50 mm n: FISCHER 538255 DuoPower 6x50 with screw cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The duo of power and intelligence The fischer DuoPower offers very good hold values as a result of its 2 components: Depending on the building material, the grey components made from high quality nylon automatically activates the optimum product function (expansion, folding, knotting) for the best hold. The expansion wings of the red component support the secure expansion and offer additional security to the grey component. Easy screwing-in of the screw and correct "tightening" to close. No over-tightening of the screw. The preshaped edge on the plug head prevents the plug from slipping into the drill hole. The screws provided are optimally suited to the fischer expansion plug DuoPower. Combination of two material components for more performance Secure functions for solid (expansion) and hollow and panel building materials (folding/knotting) Easy installation: narrow edge of the plug prevents it from falling deeper into the drill hole Best possible feedback from the anchor - you can feel that the anchor is sitting perfectly With the appropriate screw for a perfect hold Two component materials for top load values and intelligent functioning depending on the substrate Great feedback (feel-good factor) of the plug. You can feel exactly, when the plug is installed perfectly The narrow plug rim prevents slipping into the drill hole The serrated anti-rotation feature prevents rotation in the drill hole during installation The greater anchorage depth of the DuoPower 6 x 50, 8 x 65 and 10 x 80 means that the plug is especially suited to fixings in hollow building materials, aerated concrete and to bridge plaster Suitable for The DuoPower is suitable for pre-positioned and push-through installation The red expansion wings support the safe expansion and offer additional safety for the grey component The duo of two different materials and its multiple functional abilities (expanding, folding, and knotting) extend the range of applications to additional materials with top loads The required screw length is given by the plug length + fixture thickness + 1x the screw diameter Suitable for wood and chipboard screws, as well as stud screws In the case of fixing boards, the threadless part of the screw must not be longer than the fixture Building materials Concrete Solid brick Solid sand-lime brick Aerated concrete Vertically perforated brick Perforated sand-lime brick Plasterboard Gypsum plasterboard and gypsum fibreboards Hollow blocks made from lightweight concrete Cavity floor slabs made from bricks and concrete or similar Natural stone Chipboard Solid panel made from gypsum Solid brick made from lightweight concrete Application TV consoles Lighting Shelves Mirror cabinets Letter boxes Pictures Fixing blinds Curtain rails Wash basin fixings Plumbing and heating fixings Bath and toilet installations Wall cabinets Range hood ds: dsc: Scope of delivery (per purchase of 50) 50x DuoPower 6x 50 50x countersunk screw 4.5x 60 kts: DuoPower 6x50 with screw kpn: 538255 kpn_dash: kpn_clear: 538255 bkpn: FISCHER 538255 bkpn_clear: FISCHER 538255 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 538255 sr_ns: FISCHER538255
r: 03308133 p: 0.042 pid: 176202 b: FISCHER q: 8600 st: 1 lt: 1 ean: 4048962480832 sr: FISCHER 568008 sr_no_br: 568008 sr_no_br_cl: 568008 sr_cl: FISCHER568008 sr_dash: sold: 121.8 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm With screw No Drilling diameter 8 mm type (screw head) With collar Yes Application General Wall plug type Universal plug Material (wall plug) PA6 - Polyamide 6 (Nylon® 6) Drill hole depth 50 mm Length (Wall plug) 40 mm n: FISCHER 568008 plug SX Plus 8 x 40 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The specialist for solid building materials. Thanks to its 4-way expansion, the fischer SX Plus expansion plug is the specialist for solid building materials such as concrete, sand-lime brick and masonry. The special fixing blades ensure pre-fixation of the screw, which means that it does not have to be additionally held in place for overhead applications. This screw fixation allows the user a flexible and comfortable setting process. The flexibel plug edge also prevents the plug from slipping deeper into the drill hole for secure installation. The high-quality nylon material guarantees a permanently secure hold in a wide range of solid and perforated building materials. 4-Way expansion for high load values Fixing blades for screw fixation and flexible mounting Installation of the plug possible with little effort Plug edge prevents slipping deeper into the drill hole Noticeable tightening torque prevents overtightening of the screw The 4-way expansion ensures optimum force transmission into the building material and guarantees high holding values in solid and perforated building materials The special fixing wings ensure pre-fixation of the screw, leaving both of the user's hands free during the setting process The expansion-free plug neck prevents the creation of expansion forces on the material surface whilst screwing in the screw. This helps to prevent damage to tiles and plaster The special shape of the plug makes it easy to insert into the drill hole with just a few hammer blows The pronounced edge of the plug prevents it from slipping deeper into the drill hole and enables secure installation Due to the noticeable tightening torque, the user automatically recognizes when the screw is properly installed and thus prevents overtightening of the screw Suitable for The SX Plus is suitable for pre-positioned and push-through installation When the plug is inserted, the fixing wings fold inwards. This locks the screw in place when it is inserted into the plug and prevents it from falling out, which is particularly helpful in overhead applications When the screw is tightened, the SX Plus expands in four directions and thus anchors itself securely in the building material The anti-rotation lock prevents the plug from twisting and allows for easy installation Suitable for wood and chipboard screws, as well as stud screws The required screw length is given by the plug length + fixture thickness + the screw diameter Building materials Concrete Solid brick Solid sand-lime brick Aerated concrete Vertically perforated brick Perforated sand-lime brick Solid stone of leightweight concrete Hollow block of leightweight concrete Natural stone Hollow brick & concrete ceilings Solid gypsum boards Application Lamps Wardrobes Motion detectors Skirting boards Light wall shelves Mirror cabinets Mailboxes TV consoles Trellis Folding shutters Fire detector ds: dsc: Scope of delivery (per purchase of 100) 100x SX Plus 8x 40 kts: plug SX Plus 8 x 40 kpn: 568008 kpn_dash: kpn_clear: 568008 bkpn: FISCHER 568008 bkpn_clear: FISCHER 568008 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 568008 sr_ns: FISCHER568008
r: 02062356 p: 0.59 pid: 21819 b: FISCHER q: 0 st: lt: 5 ean: 4006209503478 sr: FISCHER 50347 sr_no_br: 50347 sr_no_br_cl: 50347 sr_cl: FISCHER50347 sr_dash: sold: 118 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm With screw Yes Drilling diameter 10 mm Application General With collar Yes type (screw head) PZ3 Wall plug type Hammer-in plug Material (wall plug) Polyamide (Nylon®) Drill hole depth - mm Length (Wall plug) 135 mm n: FISCHER 50347 nail plug N 10 x 135/85 S with countersunk head cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The hammer-in plug for simple, fast and economic installation. The fischer Hammerfix N-S with countersunk head consists of a high-quality nylon plug and a zinc-plated nail screw. These are already pre-fitted for quick assembly. The Hammerfix is led through the component in the time-saving through-type installation. When driving in the nail screw, the fixing sleeve expands and anchors itself securely in the building material. The fischer Hammerfix N-S with countersunk head is ideal for fixing timber constructions in all building materials in internal areas. Fast Hammerset installation saves time: ideal for series installation Simple and secure installation: Integrated hammer-in stop prevents premature anchor spreading Subsequent dismantling of the nail screw with a cross-slot recess is possible With countersunk head The rapid hammerset installation reduces the amount of time required and allows for an economic series installation The integrated hammer-in stop prevents the plug from expanding prematurely (jamming), thus enabling a problem-free installation Together with the cross-slot recess, the thread of the nail screw allows the screw to be removed, thus allowing for subsequent dismantling The wide range of diameters and usage lengths provides the correct plug for every fixing Suitable for Suitable for push-through installation When hammered in, the nail screw causes the plug to expand in two directions, thus providing a secure anchoring in the building material Countersunk head plugs are recommended for the installation of timber constructions; in the case of metal constructions, use flat-head plugs, and use pan-head plugs for long holes Building materials Concrete Solid sand-lime brick Building brick Natural stone Solid brick made from lightweight concrete Aerated concrete Solid panel made from gypsum Application Substructures made of wood Wall connection or plaster profiles Cable and pipe clips Perforated tapes ds: dsc: kts: nail plug N 10 x 135/85 S with countersunk head kpn: 50347 kpn_dash: kpn_clear: 50347 bkpn: FISCHER 50347 bkpn_clear: FISCHER 50347 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 50347 sr_ns: FISCHER50347
r: 87990680 p: 0.59 pid: 75949 b: FISCHER q: 0 st: lt: 5 ean: 4048962164893 sr: FISCHER 519777 sr_no_br: 519777 sr_no_br_cl: 519777 sr_cl: FISCHER519777 sr_dash: sold: 118 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm With screw Yes Drilling diameter 12 mm Application Construction board Wall plug type Cavity wall plug Material (wall plug) Polyamide (Nylon®) Drill hole depth 45 mm Length (Wall plug) 37 mm n: FISCHER 519777 Metal hollow wall plug HM 6 x 37 S with metric screw cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The versatile metal cavity fixing with metric screw. The fischer cavity metal anchor HM-S is a versatile cavity fixing with a metric screw for all panel building materials. The fixing is set with the fischer installation pliers HM-Z 1 in the pre-positioned installation. The fixing is pulled in the cavity against the board building material with the pliers. In this case, the expanding arms swing open and press onto the reverse side of the board. Alternatively, assembly can be carried out either with a screwdriver or a cordless screwdriver. The cavity metal anchor HM-S is suitable for fixing lights, towel rails, and curtain rails. Removal and installation of the attachment can be repeated without reducing load-carrying properties. This increases flexibility High load capacity due to the large supporting surface provided by the expansion arms Turning lock for convenient assembly: Claws on the edge of the fixing secure the fixing in board building material Suitable for pre-positioned installation Complete with metric screw Due to the extensive range, the HM is suitable for board building materials with a thickness of 3-50 mm and thus suitable for a number of different applications The metric internal thread allows the attachment to be removed and refitted several times, thus offering the best possible flexibility The HM's expanding arms ensure a large supporting surface, thus allowing a high load-bearing capacity The claws around the edge of the fixing penetrate the board building material, preventing the fixing from rotating, thus ensuring a secure installation Suitable for The metal cavity fixing HM is suitable for pre-positioned installation The fixing should be selected based on the thickness of the board building material, to allow the very best expansion in the cavity During installation, the expanding arms swing open and press onto the reverse side of the board The HM can be installed using installation pliers. If using a battery operated screwdriver or screwdriver for installation, the pre-assembled screws must be removed first. When screwing in and expanding the fixing, the attachment, or a max. 6 mm plate, needs to be used as a turning stop Building materials Gypsum plasterboard and gypsum fibreboards Cavity floor slabs Light building boards made of wood wool Chipboard Plywood boards Application Pictures Lighting Light shelves Towel rails Mirror cabinets Curtain rails Sub-structures ds: dsc: kts: Metal hollow wall plug HM 6 x 37 S with metric screw kpn: 519777 kpn_dash: kpn_clear: 519777 bkpn: FISCHER 519777 bkpn_clear: FISCHER 519777 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 519777 sr_ns: FISCHER519777
r: 03347520 p: 11.38 pid: 176248 b: FISCHER q: 8 st: 1 lt: 1 ean: 4048962442359 sr: FISCHER 562207 sr_no_br: 562207 sr_no_br_cl: 562207 sr_cl: FISCHER562207 sr_dash: sold: 113.8 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Drilling diameter 10 mm Length (Wall plug) 80 mm Drill hole depth 100 mm Wall plug type Hammer-in plug With screw Yes With collar Yes Application Concrete type (screw head) T40 n: FISCHER 562207 construction plug DuoXpand 10 x 120 T countersunk head cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The Xpert in all substrates Thanks to the clever combination of material and design, the plug bites into all substrates, guaranteeing universal applicability. The special blade geometry carefully moulds itself to the respective building material. This prevents breaks in porous substrates and allows anchoring close to the edge. The base made of high-quality nylon guarantees very strong fastening, at the same time the flexible red slats ensure optimum dispersion in the material. The European Technical Certification (ETA) for multiple anchoring of non-load-bearing systems guarantees safety in all substrates. The DuoXpand construction plug with double anchorage depth is certified for multiple anchoring of non-load-bearing systems in concrete, masonry and aerated concrete. Thanks to the special geometry and the use of different plastics, the plug adapts perfectly to the substrate. The range covers diameters 8 mm and 10 mm and lengths up to 230 mm. The DuoXpand with hexagonal head is very suitable for fixing metal attachments in masonry or concrete. Applications Wooden and metal facade and roof elements Window frames Fences Wardrobes Kitchen cupboards Timber TV brackets Cladding Metal brackets Metal supports Cable trays Cable trays Building materials Certified for: Concrete >= C12/15 Solid brick Solid sand-lime brick Solid concrete blocks of lightweight concrete and normal concrete Perforated clay brick Perforated sand-lime brick Lightweight concrete hollow blocks Aerated concrete Also suitable for: High-density natural stone Gypsum blocks ds: dsc: Scope of delivery (per purchase of 10) 10x construction plug DuoXpand 10x 120 T kts: construction plug DuoXpand 10 x 120 T countersunk head kpn: 562207 kpn_dash: kpn_clear: 562207 bkpn: FISCHER 562207 bkpn_clear: FISCHER 562207 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 562207 sr_ns: FISCHER562207
r: 02907496 p: 0.36 pid: 176103 b: FISCHER q: 0 st: lt: 6 ean: 4048962265910 sr: FISCHER 538746 sr_no_br: 538746 sr_no_br_cl: 538746 sr_cl: FISCHER538746 sr_dash: sold: 108 p_range: none type: standard act: 1 avo: 1 av: Material Polypropylene For Mounting rail Color Black n: FISCHER 538746 cover cap AK 17 cn: COVER CAP cn2: COVER CAP cn_clear: COVERCAP d: Product description The cover cap for flush protection that matches the FLS profile sizes The fischer cover cap AK forms the closure at the ends of the channel FLS and the cantilever arm ALK. The cover cap protects against injuries and finishes the profile off optically. The cover cap AK is offered in black polypropylene to complement the three profile sizes of the mounting rails FLS. For profile 17/1. 0 Colour: Black Suitable for channel FLS 17, FLS 30 and FLS 37 and cantilever arms ALK Application Closing for channel FLS and cantilever arms ALK ds: dsc: kts: cover cap AK 17 kpn: 538746 kpn_dash: kpn_clear: 538746 bkpn: FISCHER 538746 bkpn_clear: FISCHER 538746 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Cover cap | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer cover cap sr_no_br_cl_ns: 538746 sr_ns: FISCHER538746
r: 87030002 p: 0.019 pid: 74013 b: FISCHER q: 1100 st: 1 lt: 1 ean: 4006209501054 sr: FISCHER 50105 sr_no_br: 50105 sr_no_br_cl: 50105 sr_cl: FISCHER50105 sr_dash: sold: 102.6 p_range: none type: standard act: 1 avo: 1 av: Diameter (wall plug) - mm Drilling diameter 5 mm Max. screw diameter 4 mm type (screw head) Application General With screw No Wall plug type Universal plug Material (wall plug) PA6 - Polyamide 6 (Nylon® 6) Drill hole depth 35 mm Length (Wall plug) 25 mm n: FISCHER 50105 plug S 5 cn: WALL PLUG cn2: WALL PLUG cn_clear: WALLPLUG d: Product description The installation-friendly nylon plug with 2-way expansion. The fischer expansion plug S is the original and the proven classic millions of times for decades. The plastic fixing is made entirely from high-quality nylon. As a result, the plug is particularly robust during installation and guarantees permanent security. As the plug only expands in two directions, it is possible to direct the expansion forces so that they run parallel to the edge of the building material by turning the plug. This prevents the building material from spalling due to fixings close to the edge. Wood or chipboard screws can be used to fix the object. The fischer expansion plug S is ideal for fixing in concrete and solid masonry. The rimless plug is suitable for pre-positioned and push-through installation Simple insertion due to the ease of pushing in the plug The anti-rotation lock prevents rotation in the drill hole. This guarantees a high degree of safety during installation The rimless plug sleeve allows for the plug to be set as deep as required below the plaster to the bearing substrate to achieve the maximum load-bearing capacity As the plug only expands in two directions, it is possible to direct the expansion forces so that they run parallel to the edge of the building material by turning the plug. This allows for smaller edge distances The slimline plug geometry makes it easy to push the plug into the drill hole. For a fast and simple installation The anti-rotation lock prevents the plug rotating in the drill hole, thus guaranteeing a high level of installation safety Suitable for The expansion plug S is suitable for pre-positioned and push-through installation When turning in the screw, the expansion plug S expands in two directions, thus providing a secure anchoring in the building material The required screw length is given by the plug length + plaster and/or insulation material thickness + fixture thickness + 1 x screw diameter Suitable for wood and chipboard screws The edge distance must be at least one plug length For installations close to the edge, turn the plug so that the expansion force acts parallel to the edge Building materials Concrete Solid sand-lime brick Natural stone with dense structure Solid brick made from lightweight concrete Solid brick Application Pictures Lighting Skirting Light shelves Mirror cabinets Letter boxes Motion detectors Information boards Curtain rails Electrical installations ds: dsc: kts: plug S 5 kpn: 50105 kpn_dash: kpn_clear: 50105 bkpn: FISCHER 50105 bkpn_clear: FISCHER 50105 c_path: Home / Fasteners and machine components / Fasteners / Plugs and covers / Wall plug | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer plugs and covers / Fischer wall plug sr_no_br_cl_ns: 50105 sr_ns: FISCHER50105
