r: 03299002 p: 117.19 pid: 176171 b: FISCHER q: 0 st: lt: 6 ean: 4048962452617 sr: FISCHER 563283 sr_no_br: 563283 sr_no_br_cl: 563283 sr_cl: FISCHER563283 sr_dash: sold: 468.76 p_range: none type: standard act: 1 avo: 1 av: Net volume 300 ml Principal hazard property GHS07 Harmful or irritant Flash point > 100 °C ADR class 9 UN number UN3077 ADR packing group III Conseils de prudence (P) P101; P102; P280 H-statements H317; H319; H400; H410 Hazard class GHS07 Harmful or irritant; GHS09 Environmental hazard Physical state Solid n: FISCHER 563283 injection mortar FIS V Plus 300 T HWK small in crate (10 pcs) cn: INJECTION MORTAR cn2: INJECTION MORTAR cn_clear: INJECTIONMORTAR d: Product description The powerful universal mortar for concrete and masonry. The fischer high-performance mortar FIS V Plus is the universal all-rounder for the highest requirements. The styrene-free vinyl ester hybrid mortar with its numerous fixing elements is approved for fixations in cracked and non-cracked concrete as well as in masonry. However, the injection mortar is also used with the approved system components for rebar connections, the fischer remedial wall tie VBS 8, the fischer weather facing wall tie FWS II, and the stand-off installation system TherMax. The variant FIS VS Plus Low Speed enables an extended processing time at higher processing temperatures or a greater drill hole depth. The shorter hardening time of the variant FIS VW Plus High Speed enables swift work progress even at low temperatures. ETA approval for post-installed rebar connections Injection mortar system with approval for all relevant building materials Maximum load absorption for much greater security Approved service life of 100 years Application in water-filled boreholes The FIS V Plus injection mortar has numerous system approvals, such as in cracked and non-cracked concrete, masonry and for special applications The ETA assessment for a service life of 100 years offers permanent safety for all applications The approved use in water-filled drill holes enables a wide range of applications, even under harsh environmental conditions FIS VW Plus High Speed has a significantly shorter hardening time than FIS V Plus, which ensures swift work progress even at low temperatures The FIS VS Plus Low Speed has an extended processing time that prevents the premature hardening of the mortar at higher temperatures. It is ideally suited to large drill hole depths The extensive range of accessories is ideally suited to the FIS V Plus injection mortar family, increases the great flexibility of the system and thus allows for a broad range of applications Suitable for FIS V Plus is a 2-component injection mortar based on a vinyl ester hybrid concept Resin and hardener are stored in two separate chambers and are not mixed and activated until extrusion through the static mixer The mortar is extruded bubble free from the drill hole base The mortar bonds the entire surface of the anchor with the drill hole wall and seals the drill hole The injection cartridges are quick and easy to use with the fischer dispensers Partially used cartridges can be reused by changing the static mixer Building materials Approved for anchorings in: Concrete C20/25 to C50/60, cracked and non-cracked Hollow blocks made from lightweight concrete Hollow blocks made from concrete Vertically perforated brick Perforated sand-lime brick Solid sand-lime brick Aerated concrete Solid brick Approved for: Rebar connections Remedial wall tie VBS 8 Weather facing reconstruction system FWS II Stand-off installation TherMax Application Steelwork constructions Timber constructions Guard rails Façades Staircases Steel brackets Machines Masts Awnings Canopies Gates Consoles Pipelines Gratings Satellite antennas ds: dsc: Scope of delivery 10 Cartridges 300ml 20x FIS MR Plus mixing nozzles kts: injection mortar FIS V Plus 300 T HWK small in crate (10 pcs) kpn: 563283 kpn_dash: kpn_clear: 563283 bkpn: FISCHER 563283 bkpn_clear: FISCHER 563283 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Injection mortar | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer injection mortar sr_no_br_cl_ns: 563283 sr_ns: FISCHER563283
r: 87051104 p: 0.54 pid: 74414 b: FISCHER q: 0 st: lt: 1 ean: 4006209406649 sr: FISCHER 40664 sr_no_br: 40664 sr_no_br_cl: 40664 sr_cl: FISCHER40664 sr_dash: sold: 459 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 8 mm Effective length 10/20 mm Overall length 71 mm Material (bolt) Steel Surface treatment (bolt) Zinc plated Thread designation M8 n: FISCHER 40664 rapid-action anchor FBN II 8/10 electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description The cost-efficient fixing for flexible use in non-cracked concrete The fischer bolt anchor FBN II is a steel anchor for cost-effective fixations in non-cracked concrete. Thanks to its long thread and the two anchorage depths, the fischer bolt anchor FBN II is particularly flexible. In addition to pre-positioned and push-through installation, the bolt anchor is suitable for stand-off installation. In the stainless steel design, the bolt anchor is suitable for façade sub-structures, cantilevers and ladders outside. The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment Suitable for The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut) When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall The head embossing offers a simple control of the anchoring In the case of series installation, we recommend using the FABS bolt anchor setting tool Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steel constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades ds: dsc: kts: rapid-action anchor FBN II 8/10 electrolytically galvanised steel kpn: 40664 kpn_dash: kpn_clear: 40664 bkpn: FISCHER 40664 bkpn_clear: FISCHER 40664 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 40664 sr_ns: FISCHER40664
r: 87051120 p: 1.16 pid: 76266 b: FISCHER q: 0 st: lt: 1 ean: 4006209452646 sr: FISCHER 45264 sr_no_br: 45264 sr_no_br_cl: 45264 sr_cl: FISCHER45264 sr_dash: sold: 440.8 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 12 mm Effective length 50/65 mm Overall length 146 mm Material (bolt) Steel Surface treatment (bolt) Zinc plated Thread designation M12 n: FISCHER 45264 rapid-action anchor FBN II 12/50 electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description The cost-efficient fixing for flexible use in non-cracked concrete The fischer bolt anchor FBN II is a steel anchor for cost-effective fixations in non-cracked concrete. Thanks to its long thread and the two anchorage depths, the fischer bolt anchor FBN II is particularly flexible. In addition to pre-positioned and push-through installation, the bolt anchor is suitable for stand-off installation. In the stainless steel design, the bolt anchor is suitable for façade sub-structures, cantilevers and ladders outside. The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment Suitable for The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut) When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall The head embossing offers a simple control of the anchoring In the case of series installation, we recommend using the FABS bolt anchor setting tool Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steel constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades ds: dsc: kts: rapid-action anchor FBN II 12/50 electrolytically galvanised steel kpn: 45264 kpn_dash: kpn_clear: 45264 bkpn: FISCHER 45264 bkpn_clear: FISCHER 45264 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 45264 sr_ns: FISCHER45264
r: 87051111 p: 0.87 pid: 75716 b: FISCHER q: 150 st: 1 lt: 1 ean: 4006209408513 sr: FISCHER 40851 sr_no_br: 40851 sr_no_br_cl: 40851 sr_cl: FISCHER40851 sr_dash: sold: 435 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 10 mm Effective length 20/30 mm Overall length 96 mm Material (bolt) Steel Surface treatment (bolt) Zinc plated Thread designation M10 n: FISCHER 40851 rapid-action anchor FBN II 10/20 electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description The cost-efficient fixing for flexible use in non-cracked concrete The fischer bolt anchor FBN II is a steel anchor for cost-effective fixations in non-cracked concrete. Thanks to its long thread and the two anchorage depths, the fischer bolt anchor FBN II is particularly flexible. In addition to pre-positioned and push-through installation, the bolt anchor is suitable for stand-off installation. In the stainless steel design, the bolt anchor is suitable for façade sub-structures, cantilevers and ladders outside. The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment Suitable for The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut) When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall The head embossing offers a simple control of the anchoring In the case of series installation, we recommend using the FABS bolt anchor setting tool Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steel constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades ds: dsc: kts: rapid-action anchor FBN II 10/20 electrolytically galvanised steel kpn: 40851 kpn_dash: kpn_clear: 40851 bkpn: FISCHER 40851 bkpn_clear: FISCHER 40851 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 40851 sr_ns: FISCHER40851
r: 02316710 p: 0.051 pid: 20234 b: FISCHER q: 600 st: 1 lt: 1 ean: 4006209798157 sr: FISCHER 79815 sr_no_br: 79815 sr_no_br_cl: 79815 sr_cl: FISCHER79815 sr_dash: sold: 428.4 p_range: none type: standard act: 1 avo: 1 av: Length 18 mm n: FISCHER 79815 drive-in nail ED 18 cn: DROP-IN ANCHOR cn2: DROP-IN ANCHOR cn_clear: DROPINANCHOR d: Product description Fixing in concrete without pre-drilling. The fischer conduit clips and fischer perforated tapes are knocked into concrete without pre-drilling with the fischer impact nail ED. For assembly, the fischer impact nail is inserted into the setting tool SZE. During the setting process, the retaining ring fixes the nail. The impact nail sits firmly in concrete after a few taps of the hammer. Quick and easy impact installation without pre-drilling in concrete Safe hammering due to impact protection on the setting tool SZE The stable impact nail ED can be set in concrete with the impact nail setting tool SZE without pre-drilling. This allows for a fast installation The setting tool SZE impact protection provides the best protection for your hand, thus ensuring a safe installation Suitable for The impact nail ED is set in the setting tool SZE The bracket in the setting tool holds the nail securely in place during the installation procedure Pre-positioning of the element to be fixed The nail can be hammered through the fixing element directly into the concrete Building materials Concrete Application Conduit clips such as BSM, BSMD, BSMZ Perforated band such as LBK, LBV ds: dsc: kts: drive-in nail ED 18 kpn: 79815 kpn_dash: kpn_clear: 79815 bkpn: FISCHER 79815 bkpn_clear: FISCHER 79815 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Drop-in anchor | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer drop-in anchor sr_no_br_cl_ns: 79815 sr_ns: FISCHER79815
r: 87051158 p: 7.83 pid: 74280 b: FISCHER q: 50 st: 1 lt: 1 ean: 4006209521922 sr: FISCHER 52192 sr_no_br: 52192 sr_no_br_cl: 52192 sr_cl: FISCHER52192 sr_dash: sold: 391.5 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 16 mm Effective length 250/265 mm Overall length 370 mm Material (bolt) Steel Surface treatment (bolt) Zinc plated Thread designation M16 n: FISCHER 52192 fastening anchor FBN II 16/250 GS with large washer ev cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description The cost-efficient fixing with large washer for flexible use in non-cracked concrete. The fischer bolt anchor FBN II with large washer is a steel anchor for cost-effective fixings in non-cracked concrete. Due to the long thread and the two anchorage depths, the fischer bolt anchor FBN II can be used in a particularly flexible manner. The bolt anchor is also suitable for stand-off installation as well as pre-positioned and in push-through installation. The steel anchor, made of zinc-plated steel and with a large pre-mounted washer, is recommended for fixing bearing beams and sills, as well as other timber constructions. The large washer increases the size of the supporting surface. For the fixing of timber constructions Pre-assembled washer saves time during installation The FBN II achieves maximum load-bearing capacity with standard anchorage depth. This means: fewer fixing points and smaller anchor plates If the reduced anchorage depth is used, then this lowers the drill hole depth and simplifies installation Component tolerances are balanced out with the long thread. In addition, FBN II is also suitable for stand-off installations. This increases flexibility The larger washer included with the FBN II GS creates a large supporting surface and, as such, allows for use in wood construction The pre-fitted washer ensures a fast assembly The standard anchorage depth achieves the maximum load-bearing capacities. This means that fewer fixing points and smaller anchor plates are required The anchor is also ideal for large fixture thicknesses The long thread balances component tolerances and stand-off installations, and thus increases flexibility Fewer hammer blows and the minimal torque slippage allow for a noticeably simpler assembly The drive-in pin protects the threaded screw from damage, and as such ensures a faster installation and dismantling of the fixture Suitable for The FBN II GS is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut) When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall The head embossing offers a simple control of the anchoring In the case of series installation, we recommend using the FABS bolt anchor setting tool Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Anchor plates with slotted holes Façade sub-structures with slotted holes Timber constructions Tension anchor Anchoring of wooden beams ds: dsc: kts: fastening anchor FBN II 16/250 GS with large washer ev kpn: 52192 kpn_dash: kpn_clear: 52192 bkpn: FISCHER 52192 bkpn_clear: FISCHER 52192 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 52192 sr_ns: FISCHER52192
r: 02020542 p: 9.55 pid: 16159 b: FISCHER q: 0 st: lt: 8 ean: 4006209976326 sr: FISCHER 97632 sr_no_br: 97632 sr_no_br_cl: 97632 sr_cl: FISCHER97632 sr_dash: sold: 382 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 10 mm Anchoring depth 60 mm Width across flats 17 mm Effective length 40 mm Drill hole depth 75 mm Drilling diameter 10 mm n: FISCHER 97632 highbond anchor FHB II-A S M10 x 60/40 stainless steel A4 cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The best performance in cracked concrete with the least installation effort - even outdoors. The fischer Highbond rod anchor FHB II-A S A4 is produced from stainless steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that, for example, façades, railings, and steel constructions are securely installed within external areas. Reduces anchorage depth, lowers expense when drilling and installing. This saves costs Through-type installations without additional aids. This saves time Optimised for low axial and edge distances in cracked concrete No drill hole cleaning is required when using a resin capsule. This saves time ETA approval for cracked concrete The reduced anchorage depth of the FHB II-A S minimises the drilling and installation effort. In addition using the combination with FHB II-P/-PF capsule no drill hole cleaning is required. Thus allowing for an especially economical and time-saving fixing With the anchor rod FHB II-A S, the drill bit diameter is the same as the thread diameter. This allows for push-through installation without any tools and reduces the amount of mortar required The cone shape of the anchor rod FHB II-A S is optimised for small axial and edge distances in cracked concrete, as well as thin concrete members. As a result, it is suitable for a wide range of applications The anchor rod FHB II-A S is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application Suitable for The FHB II-A S is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation With the FHB II-A S, the drill bit diameter is the same as the thread diameter, similar to with an anchor bolt The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art. -No. 62420 Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Suitable for: Guard rails Façades Staircases Steel brackets Masts Rash protection Steelwork constructions Timber constructions Ideal for: Push-through installation ds: dsc: kts: highbond anchor FHB II-A S M10 x 60/40 stainless steel A4 kpn: 97632 kpn_dash: kpn_clear: 97632 bkpn: FISCHER 97632 bkpn_clear: FISCHER 97632 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 97632 sr_ns: FISCHER97632
r: 02137347 p: 5.81 pid: 21108 b: FISCHER q: 0 st: lt: 8 ean: 4048962087482 sr: FISCHER 507565 sr_no_br: 507565 sr_no_br_cl: 507565 sr_cl: FISCHER507565 sr_dash: sold: 348.6 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 12 mm Effective length 30/45 mm Overall length 126 mm Material (bolt) Stainless steel A4 Thread designation M12 n: FISCHER 507565 rapid-action anchor FBN II 12/30 stainless steel R cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description The cost-efficient fixing for flexible use in non-cracked concrete The fischer bolt anchor FBN II is a steel anchor for cost-effective fixations in non-cracked concrete. Thanks to its long thread and the two anchorage depths, the fischer bolt anchor FBN II is particularly flexible. In addition to pre-positioned and push-through installation, the bolt anchor is suitable for stand-off installation. In the stainless steel design, the bolt anchor is suitable for façade sub-structures, cantilevers and ladders outside. The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment Suitable for The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut) When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall The head embossing offers a simple control of the anchoring In the case of series installation, we recommend using the FABS bolt anchor setting tool Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steel constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades ds: dsc: kts: rapid-action anchor FBN II 12/30 stainless steel R kpn: 507565 kpn_dash: kpn_clear: 507565 bkpn: FISCHER 507565 bkpn_clear: FISCHER 507565 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 507565 sr_ns: FISCHER507565
r: 03294160 p: 1.13 pid: 176179 b: FISCHER q: 75 st: 1 lt: 1 ean: 4048962462050 sr: FISCHER 564580 sr_no_br: 564580 sr_no_br_cl: 564580 sr_cl: FISCHER564580 sr_dash: sold: 339 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 10 mm Effective length 20 mm Overall length 105 mm Material (bolt) Steel Surface treatment (bolt) Electrogalvanised Thread designation M10 n: FISCHER 564580 Piercing anchor FAZ II Plus 10/20 EV electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description For highest demands. Powerful and flexible The fischer bolt anchor FAZ II Plus is the steel anchor for the highest demands with high tensile strengths and a wide range of applications. Heavy loads can be secured in cracked concrete using the steel anchor. The FAZ II Plus is easier and faster to set due to the elimination of drill hole cleaning (M8-M24). The tried-and-tested expansion clip safely introduces the loads into the concrete and enables an immediately loadable, high load-bearing capacity even with dynamic applications. For example, the steel anchor is ideal for the anchoring of railings, cable trays, consoles and for dynamic loads such as lifting platforms, conveyor belts and pumps. Quick and easier assembly without the need for drill hole cleaning (M8-M24) Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24 The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire An external independent assessment confirms the service life of anchorages up to 120 years. Thus, the FAZ II Plus outlasts a whole century and is perfectly suited for large, long-lasting construction projects (M10-M16) The FAZ II Plus allows the absorption of high seismic loads of performance category C1 and C2 for diameters M10-M24 with and without the use of the filling disc FFD at installation The variable anchorage depths allow a millimetre-accurate adjustment to the loads The first bolt anchor M6 with ETA evaluation option 1 ensures a safe and approved anchorage Suitable for The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall The anchor is set in line with the approval once the preset installation torque is achieved In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools In case of seismic demands, the annular gap can be filled using the filling disc FFD For dynamic loads, an additional "dynamic set" is used, which is filled with injection mortar (compressive strength >= 50 N/mm² e. g. : FIS V Plus, FIS EM Plus, FIS HB or FIS SB) after installation Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 (classification available) Concrete C80/95 (classification available) Steel fiber concrete (classification available) Solid sand-lime brick (classification available) Application Steel constructions Guard rails Consoles Tunnels Lifts Lifting platforms Conveyor belts Pumps Ladders Cable trays Machines Staircases Façades Timber constructions ds: dsc: kts: Piercing anchor FAZ II Plus 10/20 EV electrolytically galvanised steel kpn: 564580 kpn_dash: kpn_clear: 564580 bkpn: FISCHER 564580 bkpn_clear: FISCHER 564580 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 564580 sr_ns: FISCHER564580
r: 87051113 p: 0.94 pid: 76262 b: FISCHER q: 320 st: 1 lt: 1 ean: 4006209408551 sr: FISCHER 40855 sr_no_br: 40855 sr_no_br_cl: 40855 sr_cl: FISCHER40855 sr_dash: sold: 338.4 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 10 mm Effective length 50/60 mm Overall length 126 mm Material (bolt) Steel Surface treatment (bolt) Zinc plated Thread designation M10 n: FISCHER 40855 rapid-action anchor FBN II 10/50 electrolytically galvanised steel cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description The cost-efficient fixing for flexible use in non-cracked concrete The fischer bolt anchor FBN II is a steel anchor for cost-effective fixations in non-cracked concrete. Thanks to its long thread and the two anchorage depths, the fischer bolt anchor FBN II is particularly flexible. In addition to pre-positioned and push-through installation, the bolt anchor is suitable for stand-off installation. In the stainless steel design, the bolt anchor is suitable for façade sub-structures, cantilevers and ladders outside. The standard anchorage depth achieves the maximum load-bearing capacities. Thus fewer fixing points and smaller anchor plates are required The reduced anchorage depth reduces the drill hole depth. This minimises the amount of time needed for installation whilst increasing flexibility The long thread balances component tolerances and allows for stand-off installations, thus increasing flexibility Few hammer blows and the minimal torque slippage allow for a noticeably simpler installation The drive-in pin protects the thread from damage, and thus ensures a faster installation and dismantling of the attachment Suitable for The FBN II is suitable for pre-positioned and push-through installation; also suitable for stand-off installation under certain conditions Prior to installation, place the hexagon nut in the optimal position (the drive-in pin projects by approx. 3 mm out of the hexagon nut) When applying the torque, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall The head embossing offers a simple control of the anchoring In the case of series installation, we recommend using the FABS bolt anchor setting tool Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steel constructions Guard rails Consoles Ladders Cable trays Machines Staircases Gates Façades ds: dsc: kts: rapid-action anchor FBN II 10/50 electrolytically galvanised steel kpn: 40855 kpn_dash: kpn_clear: 40855 bkpn: FISCHER 40855 bkpn_clear: FISCHER 40855 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 40855 sr_ns: FISCHER40855
r: 02020569 p: 8.01 pid: 17494 b: FISCHER q: 0 st: lt: 8 ean: 4006209972991 sr: FISCHER 97299 sr_no_br: 97299 sr_no_br_cl: 97299 sr_cl: FISCHER97299 sr_dash: sold: 320.4 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 8 mm Anchoring depth 60 mm Width across flats 13 mm Effective length 30 mm Drill hole depth 75 mm Drilling diameter 10 mm n: FISCHER 97299 highbond anchor FHB II-A L M8 x 60/30 stainless steel A4 cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The best performance in cracked concrete for maximum tension loads - even outdoors. The fischer Highbond rod anchor FHB II-A L is produced from stainless steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that, for example, façades, silos, and heavy steel constructions are securely installed within external areas. Maximum load values due to large anchorage depth. This means fewer fixing points and smaller anchor plates are required Optimised anchor rod for the highest tensile loads Optimised for low axial and edge distances in cracked concrete No drill hole cleaning is required when using a resin capsule. This saves time ETA approval for cracked concrete The large anchorage depth of the anchor rod FHB II-A L allows the system to achieve maximum load values. Thus fewer fixing points and smaller anchor plates are required The cone shape of the FHB II-A L anchor rods has been specially optimised for high tensile loads. As a result, the best performance in cracked concrete is achieved The FHB II-A L anchor rod is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application No drill hole cleaning is required, if the FHB II-A L anchor rod is used in combination with the FHB II-P/-PF capsule. This saves precious installation time When using the FHB II-A L in combination with the injection mortar FIS HB, push-through installation with annular gap filling is possible without the use of any further tools Suitable for The FHB II-A L is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation When using FHB II-A L in push-through installation, the annular gap is to be filled with the injection mortar FIS HB The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall The styrene-free vinyl ester mortar fully seals the drill hole When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art. -No. 62420 Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Guard rails Façades Staircases Steel brackets Machines Silo installations Masts Rash protection Steelwork constructions Timber constructions ds: dsc: kts: highbond anchor FHB II-A L M8 x 60/30 stainless steel A4 kpn: 97299 kpn_dash: kpn_clear: 97299 bkpn: FISCHER 97299 bkpn_clear: FISCHER 97299 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 97299 sr_ns: FISCHER97299
r: 02019117 p: 1.23 pid: 10849 b: FISCHER q: 0 st: lt: 10 ean: 4006209685273 sr: FISCHER 68527 sr_no_br: 68527 sr_no_br_cl: 68527 sr_cl: FISCHER68527 sr_dash: sold: 319.8 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 10 mm Overall length 91 mm Material Steel Surface treatment Zinc plated Safety anchor No Drilling diameter 12 mm n: FISCHER FSA 12x85/25 S sleeve anchor with hex bolt electrolytically zinc plated - 68527 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The through bolt anchor with hexagonal screw for structural fixings in non-cracked concrete. The fischer sleeve anchor FSA-S is a zinc-plated steel anchor with hexagonal screw for structural fixings. The FSA-S is set in the time-saving through-type installation. When tightening, the cone is pulled into the expansion sleeve and expands it against the hole wall. The recesses act as a crumple zone to take the torque slippage. The fixture is therefore pulled towards the anchoring base. The fischer sleeve anchor FSA-S is ideal for fastening fixings that are not relevant in safety terms such as consoles, handrails, or cable trays. Simple alignment due to optimised anchor geometry, even in narrow spaces Surface flush removal due to detachable screw connection With hexagon screw The optimised geometry minimises setting energy and enables the use in extremely narrow spaces. This allows for user-friendly installation The anchor design makes it possible to use different head shapes for flexible design solutions: Hexagon head (type S), bolt version with nut and washer (type B) The detachable screw connection allows for surface flush removal Suitable for The FSA is suitable for push-through installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall The half-moon shaped recesses act as a crumple zone to take the torque slippage, so that the attachment is pulled onto the anchor base Building materials Suitable for: Concrete C12/15 to C20/25, non-cracked Natural stone with dense structure Application Handrails Consoles Ladders Cable trays Gates Façades Temporary or structural fixings ds: dsc: kts: sleeve anchor with hex bolt electrolytically zinc plated kpn: FSA 12x85/25 S kpn_dash: kpn_clear: FSA12x8525S bkpn: FISCHER FSA 12x85/25 S bkpn_clear: FISCHER FSA12x8525S c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 68527 sr_ns: FISCHER68527
r: 87992305 p: 0.89 pid: 16057 b: FISCHER q: 0 st: lt: 8 ean: 4006209902462 sr: FISCHER 90246 sr_no_br: 90246 sr_no_br_cl: 90246 sr_cl: FISCHER90246 sr_dash: sold: 311.5 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 8 mm Drilling diameter 12 mm Overall length 56 mm n: FISCHER TA M8 sleeve anchor zinc-plated - 90246 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The installation-friendly internal thread anchor with low axial spacing and small edge distances for fixings in non-cracked concrete. The fischer heavy-duty anchor TA M is an internal threaded anchor for pre-positioned installation made of zinc-plated steel. During installation the cone is pulled into the expansion sleeve and expands it against the hole wall. The plastic cover protects the thread from dirt. This ensures that it remains functional. The heavy-duty anchor is ideal for fixing fall protection devices, systems, and machines in non-cracked concrete. Simple assembly due to low setting energy Low axial and edge distances due to uniform load introduction Surface flush installation due to detachable screw connections High flexibility due to using conventional screws and threaded rods ETA approval for non-cracked concrete The optimised geometry minimises setting energy and allows for use in extremely narrow spaces. This allows for user-friendly installation The three-part expansion sleeve creates even load distribution, thus allowing small edge and axial spacing. Thus the TA M is extremely flexible The metric internal thread allows to use standard screws or threaded rods for the ideal adaptation to suit the intended use The red plastic cap protects against soiling and thus ensures free-running of the thread Suitable for The TAM is suitable for pre-positioned installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall For correct installation, it must be ensured that the pre-positioned anchor TA M can be supported on the attachment, or that the threaded rod is countered Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steel constructions Handrails Consoles Ladders Cable trays Machines Staircases Gates Façades Stand-off installations ds: dsc: kts: sleeve anchor zinc-plated kpn: TA M8 kpn_dash: kpn_clear: TAM8 bkpn: FISCHER TA M8 bkpn_clear: FISCHER TAM8 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 90246 sr_ns: FISCHER90246
r: 02020157 p: 20.495 pid: 10647 b: FISCHER q: 0 st: lt: 8 ean: 4006209505571 sr: FISCHER 50557 sr_no_br: 50557 sr_no_br_cl: 50557 sr_cl: FISCHER50557 sr_dash: sold: 307.425 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 20 mm Drilling diameter 30 mm Overall length 110 mm n: FISCHER SL M20 sleeve anchor electrolytically galvanised steel - 50557 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The classical steel anchor for all metrical screws. The fischer heavy-duty anchor SL M is a sleeve anchor with internal thread made of zinc-plated steel. When tightening the screw, the cone is pulled into the expansion sleeve and expands it against the hole wall. The SL M is suitable for stand-off installation and for pre-positioned installation. The fischer heavy-duty anchor SL M is ideal for cost-effective fixing of machines or consoles in internal areas. High flexibility: Internal thread is suitable for screws and threaded bolts with metric thread Repeated loosening and installing of the component for adjustment is possible Surface flush removal possible Plastic cap on cone protects internal thread from drilling dust. This ensures that the thread remains functional The optimised geometry minimises setting energy and allows for use in extremely narrow spaces. This allows for user-friendly installation The three-part expansion sleeve creates even load distribution, thus allowing small edge and axial spacing. Thus the TA M is extremely flexible The metric internal thread allows to use standard screws or threaded rods for the ideal adaptation to suit the intended use The red plastic cap protects against soiling and thus ensures free-running of the thread Suitable for The SL M is suitable for pre-positioned installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall For correct installation, it must be ensured that the pre-positioned anchor SL M can be supported on the attachment, or that the threaded rod is countered Building materials Concrete C20/25 to C50/60, non-cracked Concrete C12/15 Natural stone with dense structure Application Steel constructions Handrails Consoles Ladders Cable trays Machines Staircases Gates Façades Stand-off installations ds: dsc: kts: sleeve anchor electrolytically galvanised steel kpn: SL M20 kpn_dash: kpn_clear: SLM20 bkpn: FISCHER SL M20 bkpn_clear: FISCHER SLM20 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 50557 sr_ns: FISCHER50557
r: 02019415 p: 1.01 pid: 11064 b: FISCHER q: 0 st: lt: 4 ean: 4006209484074 sr: FISCHER 48407 sr_no_br: 48407 sr_no_br_cl: 48407 sr_cl: FISCHER48407 sr_dash: sold: 303 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 12 mm Drilling diameter 16 mm n: FISCHER EA II M12x50 D impact anchor for diamond core drills - 48407 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The internally threaded anchor with approval for installing diamond drills and saws. The fischer Hammerset anchor EA II M 12 D is an internal threaded anchor made of zinc-plated steel. The Hammerset anchor is set flush to the surface of the anchoring base using the hammer. With the setting tool EAW H Plus the sleeve is expanded by driving in the internal rod and expands against the drill hole wall. For correct expansion to take place, no torque must be applied to the screw or the threaded rod. The fischer zinc-plated Hammerset anchor EA II M 12 D is ideal for installing diamond drills and saws. Simple Hammerset installation: no slippage during assembly due to the pronounced edge on the anchor sleeve Use of standard metric screws and threaded rods lowers complexity ETA approval for non-cracked concrete The embossed rim prevents the anchor sleeve from slipping, thus ensuring a trouble-free hammerset installation The metric internal thread means that it is possible to use standard screws or threaded rods for the ideal adaptation to suit the intended use The EMS machine setting tool allows for effortless installation, particularly in the case of series installations The embossing that is applied when expanding with the EHS Plus setting tool offers a simple control of the anchoring and provides increased safety Fixing point at hef 25 mm prevents anchor of falling out of the drill hole before being expanded The black fixing point prevents the anchor from falling out of the drill hole during overhead installation Suitable for The EA II is suitable for pre-positioned installation Position the hammerset anchor in the drill hole and drive in flush to the surface of the anchor base using the hammer The sleeve is then expanded by driving in the internal bolt with the EHS Plus setting tool (alternative: EMS machine setting tool), and expanded against the drill hole wall The setting tools must sit on the rim of the anchor to ensure correct expansion Use the special EA II M12 x 50 D / EA M 12 x 50 N D with thicker sleeve for fixing diamond and core drilling devices Building materials Approved for: Concrete C20/25 to C50/60, cracked, for the multiple fixings of non-load-bearing systems Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Pipelines and ventilation ducts Sprinkler systems Cable conduits and wires Gratings Steel constructions Machines Consoles Shuttering props Diamond and core drilling devices ds: dsc: kts: impact anchor for diamond core drills kpn: EA II M12x50 D kpn_dash: kpn_clear: EAIIM12x50D bkpn: FISCHER EA II M12x50 D bkpn_clear: FISCHER EAIIM12x50D c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 48407 sr_ns: FISCHER48407
r: 06511415 p: 4.46 pid: 176223 b: FISCHER q: 0 st: lt: 8 ean: 4006209502655 sr: FISCHER 50265 sr_no_br: 50265 sr_no_br_cl: 50265 sr_cl: FISCHER50265 sr_dash: sold: 267.6 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 12 mm Drilling diameter 14 mm Length 160 mm Material Stainless steel Width across flats 19 mm n: FISCHER 50265 anchor rod RG M12 x 160 R stainless steel cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The fischer anchor rod with roof point and external hexagonal socket for both injection mortars and glass capsules In combination with the various mortar patterns or injection mortars approved for anchoring in cracked and uncracked concrete, solid stone masonry, porous stone masonry and aerated concrete. Threaded rods with chamfered edge and 6-sided for easy mounting with pre-portioned glass capsule. Stainless steel for outdoor use. The wide range from M8 to M30 makes the RGM very widely applicable, offering great flexibility. The many types of approved steel for RG M allows the use all corrosion resistance classes and offers the greatest possible safety in applications. Please note the approvals of the respective glass capsules or injection mortars. The RG M anchor rod is made of stainless steel. The anchor rod is a system accessory for the various mortar cartridges or injection mortars. For individual fixings, the use of the pre-portioned mortar cartridges is particularly efficient. When mounting with the mortar cartridge, the RG M anchor rod is inserted using a rotary-tapping hammer. During installation, the mortar cartridge is broken, mixed and the mortar mass activated. During installation with the injection mortar, the anchor rod is manually pushed into the borehole by means of slight twisting movements. The system is particularly suitable for efficient fixing of machinery, steel structures and support legs outdoors. Applications Anchors with Chemical Capsule RSB and RSB mini Anchors with chemical capsule RM II Anchors with injection mortars FIS SB, FIS EM Plus, FIS V and FIS V Plus Building materials In connection with fischer glass capsules approved or suitable for cracked and uncracked concrete. In connection with various fischer injection mortars approved or suitable for different building materials. ds: dsc: kts: anchor rod RG M12 x 160 R stainless steel kpn: 50265 kpn_dash: kpn_clear: 50265 bkpn: FISCHER 50265 bkpn_clear: FISCHER 50265 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 50265 sr_ns: FISCHER50265
r: 02019262 p: 1.76 pid: 10860 b: FISCHER q: 0 st: lt: 6 ean: 4006209902516 sr: FISCHER 90251 sr_no_br: 90251 sr_no_br_cl: 90251 sr_cl: FISCHER90251 sr_dash: sold: 264 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 10 mm Overall length 69 mm Material Steel Surface treatment Zinc plated Safety anchor No Drilling diameter 15 mm n: FISCHER TA M10 S/20 sleeve anchor with bolt electrolytically galvanised - 90251 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The installation-friendly internal thread anchor with screw for fixings in non-cracked concrete. The fischer heavy-duty anchor TA M-S is an internal threaded anchor for pre-positioned installation made of zinc-plated steel. During installation the cone is pulled into the expansion sleeve and expands it against the hole wall. The plastic cover protects the thread from dirt. This ensures that it remains functional. The heavy-duty anchor is ideal for fixing fall protection devices, systems, and machines in non-cracked concrete. Simple assembly due to low setting energy Low axial and edge distances due to uniform load introduction Surface flush installation due to detachable screw connections ETA approval for non-cracked concrete The optimised geometry minimises setting energy and allows for use in extremely narrow spaces. This allows for user-friendly installation The three-part expansion sleeve creates even load distribution, thus allowing small edge and axial spacing. Thus the TA M is extremely flexible The metric internal thread allows to use standard screws or threaded rods for the ideal adaptation to suit the intended use The red plastic cap protects against soiling and thus ensures free-running of the thread Suitable for The TAM is suitable for pre-positioned installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall For correct installation, it must be ensured that the pre-positioned anchor TA M can be supported on the attachment, or that the threaded rod is countered Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steel constructions Handrails Consoles Ladders Cable trays Machines Staircases Gates Façades Stand-off installations ds: dsc: kts: sleeve anchor with bolt electrolytically galvanised kpn: TA M10 S/20 kpn_dash: kpn_clear: TAM10S20 bkpn: FISCHER TA M10 S/20 bkpn_clear: FISCHER TAM10S20 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 90251 sr_ns: FISCHER90251
r: 02020178 p: 4.37 pid: 17186 b: FISCHER q: 0 st: lt: 10 ean: 4006209970737 sr: FISCHER 97073 sr_no_br: 97073 sr_no_br_cl: 97073 sr_cl: FISCHER97073 sr_dash: sold: 262.2 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 10 mm Anchoring depth 60 mm Width across flats 17 mm Effective length 20 mm Drill hole depth 75 mm Drilling diameter 10 mm n: FISCHER 97073 highbond anchor FHB II-A S M10 x 60/20 ev cn: ANCHOR ROD cn2: ANCHOR ROD cn_clear: ANCHORROD d: Product description The best performance in cracked concrete with the least installation effort. The fischer Highbond rod anchor FHB II-A S is produced from zinc-plated steel. The torque-controlled composite anchor can be processed with the Highbond special mortar FIS HB or the mortar cartridges FHB II-P and FHB II-PF HIGH SPEED. When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall. Using the fischer Highbond system FHB II means that railings, machines and heavy steel constructions are securely installed within internal areas. Reduces anchorage depth, lowers expense when drilling and installing. This saves costs Through-type installations without additional aids. This saves time Optimised for low axial and edge distances in cracked concrete No drill hole cleaning is required when using a resin capsule. This saves time ETA approval for cracked concrete The reduced anchorage depth of the FHB II-A S minimises the drilling and installation effort. In addition using the combination with FHB II-P/-PF capsule no drill hole cleaning is required. Thus allowing for an especially economical and time-saving fixing With the anchor rod FHB II-A S, the drill bit diameter is the same as the thread diameter. This allows for push-through installation without any tools and reduces the amount of mortar required The cone shape of the anchor rod FHB II-A S is optimised for small axial and edge distances in cracked concrete, as well as thin concrete members. As a result, it is suitable for a wide range of applications The anchor rod FHB II-A S is approved for use both with capsules and with injection mortar. This guarantees maximum flexibility in the application Suitable for The FHB II-A S is a bonded anchor with torque-controlled expansion for pre-positioned and push-through installation With the FHB II-A S, the drill bit diameter is the same as the thread diameter, similar to with an anchor bolt The anchor rod can be set either with injection mortar FIS HB or with the capsule FHB II-P / FHB II-PF HIGH SPEED, and is fully bonded in the drill hole When tightening the hexagon nut, the anchor rod cones are pulled into the mortar shell, which expands against the drill hole wall When using the resin capsule, set the anchor rod through rotating and hitting motions with a hammer drill. Use the RA-SDS setting tool, Art. -No. 62420 Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Application Suitable for: Guard rails Façades Staircases Steel brackets Masts Rash protection Steelwork constructions Timber constructions Ideal for: Push-through installation ds: dsc: kts: highbond anchor FHB II-A S M10 x 60/20 ev kpn: 97073 kpn_dash: kpn_clear: 97073 bkpn: FISCHER 97073 bkpn_clear: FISCHER 97073 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor rod | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor rod sr_no_br_cl_ns: 97073 sr_ns: FISCHER97073
r: 02020027 p: 23.305 pid: 17178 b: FISCHER q: 0 st: lt: 8 ean: 4006209906804 sr: FISCHER 90680 sr_no_br: 90680 sr_no_br_cl: 90680 sr_cl: FISCHER90680 sr_dash: sold: 256.355 p_range: none type: standard act: 1 avo: 1 av: Drilling diameter 16 mm Effective length 50 mm Overall length 200 mm n: FISCHER 90680 diamond core drill fastener FDBB 16/50 set cn: ANCHOR BOLT cn2: ANCHOR BOLT cn_clear: ANCHORBOLT d: Product description The reusable fixing system for diamond drills and saws. The fischer fixing set for diamond drills FDBB is suitable for temporary fixing of diamond and core drilling devices as well as diamond saws. The fixing set consists of a reusable spindle bolt with nut and washer. The detachable screw connection between the expansion element and spindle allows for simple dismantling and ensures that the spindle bolt can be reused. The expansion element remains in the drill hole when dismantling the spindle bolt. The spindle bolt is once again completed with an expansion element and can be reused. Detachable screw connection so the fastener can be reused Pre-positioned installation and push-through installation Active controlled expansion behaviour for high levels of safety Robust, reusable spindle bolt The detachable screw connection between the expansion element and spindle enables simple dismantling and ensures that the spindle bolt can be reused The robust, reusable spindle bolt guarantees a long life span The active principle of the anchor bolt enables an active controlled expansion, thus offering a high level of safety The large steel cross-section provides high shear load-bearing capability and, as such, high security for the jerky stoppage of the drill bit Suitable for The FDBB is suitable for pre-positioned and push-through installation An expansion element must be added to the spindle bolt before installation Use a hammer to drive the FDBB through the base plate of the drilling device into the drill hole When the nut is tightened, the cone bolt is pulled into the expansion clip and expands it against the drill hole wall The expansion element remains in the drill hole when dismantling the spindle bolt. The spindle bolt is once again completed with an expansion element and can be reused Building materials Suitable for: Concrete C12/15 to C50/60, non-cracked Natural stone with dense structure Application Diamond and core drilling devices Diamond saws ds: dsc: Scope of delivery 1 Spreading element 16 SE 1 Spindle bolt 16/50/160 1 Washer 1 Nut kts: diamond core drill fastener FDBB 16/50 set kpn: 90680 kpn_dash: kpn_clear: 90680 bkpn: FISCHER 90680 bkpn_clear: FISCHER 90680 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor bolt | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor bolt sr_no_br_cl_ns: 90680 sr_ns: FISCHER90680
r: 02019256 p: 1.02 pid: 10618 b: FISCHER q: 0 st: lt: 8 ean: 4006209902493 sr: FISCHER 90249 sr_no_br: 90249 sr_no_br_cl: 90249 sr_cl: FISCHER90249 sr_dash: sold: 255 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 6 mm Overall length 49 mm Material Steel Surface treatment Zinc plated Safety anchor No Drilling diameter 10 mm n: FISCHER TA M6 S/10 sleeve anchor with bolt electrolytically galvanised - 90249 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The installation-friendly internal thread anchor with screw for fixings in non-cracked concrete. The fischer heavy-duty anchor TA M-S is an internal threaded anchor for pre-positioned installation made of zinc-plated steel. During installation the cone is pulled into the expansion sleeve and expands it against the hole wall. The plastic cover protects the thread from dirt. This ensures that it remains functional. The heavy-duty anchor is ideal for fixing fall protection devices, systems, and machines in non-cracked concrete. Simple assembly due to low setting energy Low axial and edge distances due to uniform load introduction Surface flush installation due to detachable screw connections ETA approval for non-cracked concrete The optimised geometry minimises setting energy and allows for use in extremely narrow spaces. This allows for user-friendly installation The three-part expansion sleeve creates even load distribution, thus allowing small edge and axial spacing. Thus the TA M is extremely flexible The metric internal thread allows to use standard screws or threaded rods for the ideal adaptation to suit the intended use The red plastic cap protects against soiling and thus ensures free-running of the thread Suitable for The TAM is suitable for pre-positioned installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall For correct installation, it must be ensured that the pre-positioned anchor TA M can be supported on the attachment, or that the threaded rod is countered Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steel constructions Handrails Consoles Ladders Cable trays Machines Staircases Gates Façades Stand-off installations ds: dsc: kts: sleeve anchor with bolt electrolytically galvanised kpn: TA M6 S/10 kpn_dash: kpn_clear: TAM6S10 bkpn: FISCHER TA M6 S/10 bkpn_clear: FISCHER TAM6S10 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 90249 sr_ns: FISCHER90249
