r: 87051397 p: 2.45 pid: 16314 b: FISCHER q: 0 st: lt: 9 ean: 4048962016789 sr: FISCHER 503138 sr_no_br: 503138 sr_no_br_cl: 503138 sr_cl: FISCHER503138 sr_dash: sold: 245 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 10 mm Overall length 100 mm Safety anchor Yes Drilling diameter 10 mm n: FISCHER FH II 10/50 SK safety anchor with countersunk head electrolytically galvanised - 503138 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The through bolt anchor with countersunk head in cracked concrete. The fischer high-performance anchor FH II SK with countersunk head is a sleeve anchor made of zinc-plated steel. The anchor is set in the time-saving through-type installation. When tightening the anchor, the cone is pulled into the expansion sleeve and expands it against the hole wall. The black plastic ring prevents the anchor from rotating and absorbs the torque slippage. This means that the fixture is pulled towards the anchoring base. The fischer high-performance anchor FH II SK with countersunk head is ideally suited to fix railings, staircases, and ladders in cracked and non-cracked concrete. With countersunk head for assembly that is flush to the surface The international approvals guarantee maximum safety and maximum performance. Also for applications in earthquake regions (seismic C1 and C2) The ideal combination of screw shank and sleeve enables a high transverse load capacity and fewer fixing points The optimised geometry intelligently reduces the setting energy and thus ensures a force-saving assembly The international approvals guarantee maximum safety and the best performance. The European Technical Assessment even cover use in earthquake zones (seismic C1 and C2) The countersunk finished screw head allows for flush-mounted fixing The design between the bolt and the sleeve ensures high shear load-bearing capacity. Thus, fewer fixing points are required The optimised geometry intelligently reduces the energy required for assembly The approval regulates the use of hollow drills Suitable for The FH II is suitable for push-through installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall The black plastic ring prevents rotation when tightening the anchor, and acts as a crumple zone to take the torque slippage so that the fixture is pulled onto the anchor base Available head shapes for flexible design solutions:Countersunk head (type SK), hexagon head (type S), bolt version with nut and washer (type B) and cap nut (type H) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Guard rails Staircases Consoles Steel constructions Ladders Cable trays Machines Gates Façades Gratings ds: dsc: kts: safety anchor with countersunk head electrolytically galvanised kpn: FH II 10/50 SK kpn_dash: kpn_clear: FHII1050SK bkpn: FISCHER FH II 10/50 SK bkpn_clear: FISCHER FHII1050SK c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 503138 sr_ns: FISCHER503138
r: 87993213 p: 3.24 pid: 176395 b: FISCHER q: 100 st: 1 lt: 1 ean: 4006209784167 sr: FISCHER 78416 sr_no_br: 78416 sr_no_br_cl: 78416 sr_cl: FISCHER78416 sr_dash: sold: 243 p_range: none type: standard act: 1 avo: 1 av: n: FISCHER 78416 aerated concrete anchor FTP M8 metal cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The metal anchor for metric screws for aerated concrete. The fischer turbo Aircrete anchor FTP M is a special fixing for fixings in aerated concrete. The metal anchor is inserted into the drill hole in the pre-positioned installation using an Allen key. The spiral external thread cuts a mechanical interlock in the building material. The fischer turbo Aircrete anchor FTP M is ideally suited to securely fix mirror cabinets, radiators, and TV consoles to aerated concrete. No setting tool necessary High retention forces due to interlocking in building materials Convenient assembly: reduced wear and tear Low axial and edge distances due to expansion pressure-free anchoring The Allen key chuck makes it possible to set the FTP M without the need for a special setting tool. This allows for a simple installation The FTP M achieves a very high load-bearing capacity in aerated concrete for increased safety The spiral-shaped outer thread taps itself into the aerated concrete with a positive fit. This means that it can be set without the need for much force The special geometry allows for an almost expansion-force-free anchoring. This allows for small edge and spacing distances, and avoids splitting in the case of plastered surfaces Suitable for The FTP M is suitable for pre-positioned installation The aircrete anchor taps itself into the aircrete with a positive fit during the installation process Suitable for metric screws with diameter 6 to 10 mm For installation with a hexagon socket: Size of the hexagon socket corresponds to screw diameter, e. g. FTP M6 is installed with hexagon socket size 6 For installation with cordless screwdriver: use a low torque and use the correct 6-kt bit FTP EM Building materials Aerated concrete Solid panel made from gypsum Application Pictures Lighting Shelves Mirror cabinets Curtain rails Cable and pipe clips Stand-off installations Radiators TV consoles ds: dsc: kts: aerated concrete anchor FTP M8 metal kpn: 78416 kpn_dash: kpn_clear: 78416 bkpn: FISCHER 78416 bkpn_clear: FISCHER 78416 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 78416 sr_ns: FISCHER78416
r: 02019260 p: 1.18 pid: 9986 b: FISCHER q: 0 st: lt: 8 ean: 4006209902509 sr: FISCHER 90250 sr_no_br: 90250 sr_no_br_cl: 90250 sr_cl: FISCHER90250 sr_dash: sold: 236 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 8 mm Overall length 56 mm Material Steel Surface treatment Zinc plated Safety anchor No Drilling diameter 12 mm n: FISCHER TA M8 S/10 sleeve anchor with bolt electrolytically galvanised - 90250 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The installation-friendly internal thread anchor with screw for fixings in non-cracked concrete. The fischer heavy-duty anchor TA M-S is an internal threaded anchor for pre-positioned installation made of zinc-plated steel. During installation the cone is pulled into the expansion sleeve and expands it against the hole wall. The plastic cover protects the thread from dirt. This ensures that it remains functional. The heavy-duty anchor is ideal for fixing fall protection devices, systems, and machines in non-cracked concrete. Simple assembly due to low setting energy Low axial and edge distances due to uniform load introduction Surface flush installation due to detachable screw connections ETA approval for non-cracked concrete The optimised geometry minimises setting energy and allows for use in extremely narrow spaces. This allows for user-friendly installation The three-part expansion sleeve creates even load distribution, thus allowing small edge and axial spacing. Thus the TA M is extremely flexible The metric internal thread allows to use standard screws or threaded rods for the ideal adaptation to suit the intended use The red plastic cap protects against soiling and thus ensures free-running of the thread Suitable for The TAM is suitable for pre-positioned installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall For correct installation, it must be ensured that the pre-positioned anchor TA M can be supported on the attachment, or that the threaded rod is countered Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steel constructions Handrails Consoles Ladders Cable trays Machines Staircases Gates Façades Stand-off installations ds: dsc: kts: sleeve anchor with bolt electrolytically galvanised kpn: TA M8 S/10 kpn_dash: kpn_clear: TAM8S10 bkpn: FISCHER TA M8 S/10 bkpn_clear: FISCHER TAM8S10 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 90250 sr_ns: FISCHER90250
r: 87980001 p: 1.08 pid: 17148 b: FISCHER q: 0 st: lt: 10 ean: 4006209902479 sr: FISCHER 90247 sr_no_br: 90247 sr_no_br_cl: 90247 sr_cl: FISCHER90247 sr_dash: sold: 216 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 10 mm Drilling diameter 15 mm Overall length 69 mm n: FISCHER TA M10 sleeve anchor zinc-plated - 90247 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The installation-friendly internal thread anchor with low axial spacing and small edge distances for fixings in non-cracked concrete. The fischer heavy-duty anchor TA M is an internal threaded anchor for pre-positioned installation made of zinc-plated steel. During installation the cone is pulled into the expansion sleeve and expands it against the hole wall. The plastic cover protects the thread from dirt. This ensures that it remains functional. The heavy-duty anchor is ideal for fixing fall protection devices, systems, and machines in non-cracked concrete. Simple assembly due to low setting energy Low axial and edge distances due to uniform load introduction Surface flush installation due to detachable screw connections High flexibility due to using conventional screws and threaded rods ETA approval for non-cracked concrete The optimised geometry minimises setting energy and allows for use in extremely narrow spaces. This allows for user-friendly installation The three-part expansion sleeve creates even load distribution, thus allowing small edge and axial spacing. Thus the TA M is extremely flexible The metric internal thread allows to use standard screws or threaded rods for the ideal adaptation to suit the intended use The red plastic cap protects against soiling and thus ensures free-running of the thread Suitable for The TAM is suitable for pre-positioned installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall For correct installation, it must be ensured that the pre-positioned anchor TA M can be supported on the attachment, or that the threaded rod is countered Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steel constructions Handrails Consoles Ladders Cable trays Machines Staircases Gates Façades Stand-off installations ds: dsc: kts: sleeve anchor zinc-plated kpn: TA M10 kpn_dash: kpn_clear: TAM10 bkpn: FISCHER TA M10 bkpn_clear: FISCHER TAM10 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 90247 sr_ns: FISCHER90247
r: 02381020 p: 2.87 pid: 176186 b: FISCHER q: 0 st: lt: 4 ean: 4048962158366 sr: FISCHER 519022 sr_no_br: 519022 sr_no_br_cl: 519022 sr_cl: FISCHER519022 sr_dash: sold: 215.25 p_range: none type: standard act: 1 avo: 1 av: n: FISCHER 519022 aerated concrete anchor FPX-I M8 electrolytically galvanised steel cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The strong internal thread anchor with unique four-way expansion for fixings in aerated concrete. The fischer Aircrete anchor FPX-I is made of zinc-plated steel. After pre-drilling, the FPX-I is only driven in with the hammer. It is not necessary to clean the drill hole. The fischer Aircrete anchor is applied with a hex driver via a cordless screwdriver or via a ratchet. The cone is then pulled into the expansion sleeve. In this case the four wings create an undercut in the drill hole. After expansion, the hex socket is automatically released. The fischer Aircrete anchor FPX-I is ideally suited for fixing suspended ceilings, railings or kitchen cabinets in aerated concrete. The first approved metal anchor for aerated concrete High load capacity: Expanding wings create undercut. This saves on fixing points Simple and power-saving installation without an additional setting tool No rotation of the anchor Automatic setting control ensures maximum safety The FPX-I enables easy tightening via the hexagon wrench using a cordless screwdriver or ratchet and therefore offers top installation comfort The deformation-controlled expansion of the anchor with the hexagon wrench ensures safe, even and gentle installation The unique 4-way expansion of the FPX-I with a square expansion sleeve prevents the rotation of the anchor in the drill hole and ensures high tension and shear loads, which means fewer fixing points The releasing of the hexagonal wrench guarantees an automatical setting control for each installation process The first steel anchor with an ETA-Approval and fire protection certificate for fixings in aerated concrete enables use for safety-relevant fixings, too Suitable for The FPX-I with internal thread is suitable for pre-positioned installation Pre-drilling enables easy hammering in, even in high-strength aerated concrete. There is no need to clean the drill hole When the anchor is tightened with the hexagon wrench, the internal thread sleeve starts to rotate and the cone is pulled into the square expansion sleeve. The aerated concrete is compressed on the four sides and generates an undercut in the drill hole When reached the optimum expansion, the hexagon wrench is released automatically from the anchor Building materials Approved for: Aerated concrete with compressive strength 2 to 7 N/mm² Aerated concrete wall or ceiling boards with compressive strength 3. 3 to 4. 4 N/mm² Planked aerated concrete masonry, e. g. plastered, tiled, papered etc Application Suspended ceilings Cable trays Pipelines Ventilation ducts Guard rails/hand rails TV consoles Kitchen cupboards Stand-off installations ds: dsc: kts: aerated concrete anchor FPX-I M8 electrolytically galvanised steel kpn: 519022 kpn_dash: kpn_clear: 519022 bkpn: FISCHER 519022 bkpn_clear: FISCHER 519022 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 519022 sr_ns: FISCHER519022
r: 02529945 p: 3.29 pid: 176189 b: FISCHER q: 0 st: lt: 8 ean: 4006209436349 sr: FISCHER 43634 sr_no_br: 43634 sr_no_br_cl: 43634 sr_cl: FISCHER43634 sr_dash: sold: 197.4 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 12 mm Drilling diameter 18 mm Overall length 85 mm Material Steel Surface treatment Zinc plated Safety anchor Yes Quantiy per pack 10 n: FISCHER 43634 female threaded anchor FIS E 15 x 85 M12 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The versatile fixing system with internal threaded anchors for masonry. The internal threaded anchor FIS E is suitable for use in combination with injection mortars in masonry and aerated concrete. The female threaded anchor FIS E allows demountable anchoring without protruding parts and thus offers optimum flexibility. The metric female thread allows the use of common metric bolts or threaded rods. Please note the approvals of the respective mortar. Common metric bolts and threaded rods can be used. This reduces cost and complexity. Disassembly straight to the surface possible. The fastening point can be reused. ETA approval for maximum safety. The fischer Internal Thread Anchor FIS E made of galvanised steel is the system component of choice for use in masonry with the fischer Injection Mortar. The internal threaded anchor is applied manually, by means of small turning movements. In solid brick, the injection mortar adheres the internal threaded sleeve to the wall of the drilled hole over its entire surface. In perforated materials, the mortar is pushed through the grid of the anchor sleeve, creating a perfectly fitting joint in the perforated brick. As a result, the load is transferred to the building material. The use of female threaded anchors FIS E enables dismantling of the assembly piece in line with the surface. Applications Temporary and removable fixings Anchoring with Injection Mortar FIS V in masonry and aerated concrete Building materials Approved for: Solid sand-lime brick Perforated sand-lime brick Solid brick Solid block of light concrete Perforated brick Hollow lightweight concrete block Solid brick Aerated concrete blocks Also suitable for: Solid and lightweight concrete blocks Solid pumice stone and other solid building materials ds: dsc: kts: female threaded anchor FIS E 15 x 85 M12 kpn: 43634 kpn_dash: kpn_clear: 43634 bkpn: FISCHER 43634 bkpn_clear: FISCHER 43634 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 43634 sr_ns: FISCHER43634
r: 87051415 p: 1.08 pid: 37437 b: FISCHER q: 0 st: lt: 8 ean: 4006209685242 sr: FISCHER 68524 sr_no_br: 68524 sr_no_br_cl: 68524 sr_cl: FISCHER68524 sr_dash: sold: 194.4 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 8 mm Overall length 90 mm Material Steel Surface treatment Zinc plated Safety anchor No Drilling diameter 10 mm n: FISCHER FSA 10x85/35 S sleeve anchor with hex bolt electrolytically zinc plated - 68524 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The through bolt anchor with hexagonal screw for structural fixings in non-cracked concrete. The fischer sleeve anchor FSA-S is a zinc-plated steel anchor with hexagonal screw for structural fixings. The FSA-S is set in the time-saving through-type installation. When tightening, the cone is pulled into the expansion sleeve and expands it against the hole wall. The recesses act as a crumple zone to take the torque slippage. The fixture is therefore pulled towards the anchoring base. The fischer sleeve anchor FSA-S is ideal for fastening fixings that are not relevant in safety terms such as consoles, handrails, or cable trays. Simple alignment due to optimised anchor geometry, even in narrow spaces Surface flush removal due to detachable screw connection With hexagon screw The optimised geometry minimises setting energy and enables the use in extremely narrow spaces. This allows for user-friendly installation The anchor design makes it possible to use different head shapes for flexible design solutions: Hexagon head (type S), bolt version with nut and washer (type B) The detachable screw connection allows for surface flush removal Suitable for The FSA is suitable for push-through installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall The half-moon shaped recesses act as a crumple zone to take the torque slippage, so that the attachment is pulled onto the anchor base Building materials Suitable for: Concrete C12/15 to C20/25, non-cracked Natural stone with dense structure Application Handrails Consoles Ladders Cable trays Gates Façades Temporary or structural fixings ds: dsc: kts: sleeve anchor with hex bolt electrolytically zinc plated kpn: FSA 10x85/35 S kpn_dash: kpn_clear: FSA10x8535S bkpn: FISCHER FSA 10x85/35 S bkpn_clear: FISCHER FSA10x8535S c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 68524 sr_ns: FISCHER68524
r: 87990167 p: 0.59 pid: 17153 b: FISCHER q: 0 st: lt: 8 ean: 4006209784112 sr: FISCHER 78411 sr_no_br: 78411 sr_no_br_cl: 78411 sr_cl: FISCHER78411 sr_dash: sold: 191.75 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 4 mm Overall length 50 mm Material Plastic Safety anchor No Drilling diameter 8-(10) mm n: FISCHER FTP K 4 aerated concrete anchor nylon - 78411 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The versatile plastic anchor for aerated concrete. The fischer turbo Aircrete anchor FTP K is a special fixing for fixings in Aircrete. The anchor is made out of high-quality nylon and is set in the pre-positioned installation with the setting tool FTP EK after pre-drilling. The spiral external thread cuts a mechanical interlock in the building material. The fischer turbo Aircrete anchor FTP K is ideally suited to securely fix pictures, lights, cable and pipe clamps to aerated concrete. For wood screws and metric screws High retention forces due to interlocking in building materials Convenient assembly: reduced wear and tear due to the setting tool Low axial and edge distances due to expansion pressure-free anchoring The FTP K is suitable for both wood screws and metric screws, and thus offers flexibility in screw choice The spiral-shaped outer thread taps itself into the soft aerated concrete with a positive fit, thus ensuring a secure hold Setting with the FTP EK setting tool requires only a small amount of force. For a convenient installation The special geometry allows for an almost expansion-force-free anchoring. This allows for small edge and spacing distances, and avoids splitting in the case of plastered surfaces Suitable for The FTP K is suitable for pre-positioned installation Set the FTP K with setting tool FTP EK. The aircrete anchor taps itself into the aerated concrete with a positive fit during the installation process Suitable for wood and metric screws with diameter 4 to 10 mm Building materials Aerated concrete Solid panel made from gypsum Application Pictures Lighting Shelves Mirror cabinets Letter boxes Signs Motion detectors Cable and pipe clips Stand-off installations ds: dsc: kts: aerated concrete anchor nylon kpn: FTP K 4 kpn_dash: kpn_clear: FTPK4 bkpn: FISCHER FTP K 4 bkpn_clear: FISCHER FTPK4 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 78411 sr_ns: FISCHER78411
r: 02019387 p: 3.57 pid: 10575 b: FISCHER q: 0 st: lt: 8 ean: 4006209902691 sr: FISCHER 90269 sr_no_br: 90269 sr_no_br_cl: 90269 sr_cl: FISCHER90269 sr_dash: sold: 178.5 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 10 mm Overall length 100 mm Material Steel Surface treatment Zinc plated Safety anchor No Drilling diameter 15 mm n: FISCHER TA M10 T/25 S sleeve anchor push-through assembly zinc plated - 90269 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The installation-friendly push-through anchor for fixings in non-cracked concrete. The fischer heavy-duty anchor TA M-T is a push-through anchor for time-saving through-type installation made of zinc-plated steel. During installation the cone is pulled into the expansion sleeve and expands it against the hole wall. The heavy-duty anchor is ideal for fixing consoles, ladders, and steel constructions in non-cracked concrete. Simple assembly due to low setting energy Low axial and edge distances due to uniform load introduction ETA approval for non-cracked concrete The optimised geometry minimises setting energy and allows for use in extremely narrow spaces. This allows for user-friendly installation The three-part expansion sleeve creates even load distribution, thus allowing small edge and axial spacing. Thus the TA M-T is extremely flexible The detachable screw connection allows for surface flush removal Suitable for The TA M-T is suitable for push-through installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall Building materials Approved for: Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Steel constructions Handrails Consoles Ladders Cable trays Machines Staircases Gates Façades ds: dsc: kts: sleeve anchor push-through assembly zinc plated kpn: TA M10 T/25 S kpn_dash: kpn_clear: TAM10T25S bkpn: FISCHER TA M10 T/25 S bkpn_clear: FISCHER TAM10T25S c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 90269 sr_ns: FISCHER90269
r: 87051416 p: 0.94 pid: 17143 b: FISCHER q: 0 st: lt: 10 ean: 4006209685259 sr: FISCHER 68525 sr_no_br: 68525 sr_no_br_cl: 68525 sr_cl: FISCHER68525 sr_dash: sold: 169.2 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 8 mm Overall length 115 mm Material Steel Surface treatment Zinc plated Safety anchor No Drilling diameter 10 mm n: FISCHER FSA 10x110/60 S sleeve anchor with hex bolt electrolytically zinc plated - 68525 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The through bolt anchor with hexagonal screw for structural fixings in non-cracked concrete. The fischer sleeve anchor FSA-S is a zinc-plated steel anchor with hexagonal screw for structural fixings. The FSA-S is set in the time-saving through-type installation. When tightening, the cone is pulled into the expansion sleeve and expands it against the hole wall. The recesses act as a crumple zone to take the torque slippage. The fixture is therefore pulled towards the anchoring base. The fischer sleeve anchor FSA-S is ideal for fastening fixings that are not relevant in safety terms such as consoles, handrails, or cable trays. Simple alignment due to optimised anchor geometry, even in narrow spaces Surface flush removal due to detachable screw connection With hexagon screw The optimised geometry minimises setting energy and enables the use in extremely narrow spaces. This allows for user-friendly installation The anchor design makes it possible to use different head shapes for flexible design solutions: Hexagon head (type S), bolt version with nut and washer (type B) The detachable screw connection allows for surface flush removal Suitable for The FSA is suitable for push-through installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall The half-moon shaped recesses act as a crumple zone to take the torque slippage, so that the attachment is pulled onto the anchor base Building materials Suitable for: Concrete C12/15 to C20/25, non-cracked Natural stone with dense structure Application Handrails Consoles Ladders Cable trays Gates Façades Temporary or structural fixings ds: dsc: kts: sleeve anchor with hex bolt electrolytically zinc plated kpn: FSA 10x110/60 S kpn_dash: kpn_clear: FSA10x11060S bkpn: FISCHER FSA 10x110/60 S bkpn_clear: FISCHER FSA10x11060S c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 68525 sr_ns: FISCHER68525
r: 87990825 p: 0.94 pid: 17557 b: FISCHER q: 0 st: lt: 8 ean: 4006209484067 sr: FISCHER 48406 sr_no_br: 48406 sr_no_br_cl: 48406 sr_cl: FISCHER48406 sr_dash: sold: 164.5 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 12 mm Drilling diameter 15 mm n: FISCHER EA II M12x50 strike anchor electrolytically galvanised steel - 48406 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The internally threaded anchor with a rim for simple Hammerset installation. The fischer Hammerset anchor EA II is an internal threaded anchor made of zinc-plated steel. The Hammerset anchor is set flush to the surface of the anchoring base using the hammer. With the setting tool EHS Plus or the machine setting tool EMS the sleeve is expanded by driving in the internal rod and expands against the drill hole wall. For correct expansion to take place, no torque must be applied to the screw or the threaded rod. The fischer Hammerset anchor EA II is ideal for fixing sprinkler systems, gratings, and consoles in internal areas with approval. Simple Hammerset installation: no slippage during assembly due to the pronounced edge on the anchor sleeve Use of standard metric screws and threaded rods lowers complexity Power-saving series installation with machine setting tool EA II S-SDS Visual control due to embossing ETA approval for non-cracked concrete and multiple fixings The embossed rim prevents the anchor sleeve from slipping, thus ensuring a trouble-free hammerset installation The metric internal thread means that it is possible to use standard screws or threaded rods for the ideal adaptation to suit the intended use The EMS machine setting tool allows for effortless installation, particularly in the case of series installations The embossing that is applied when expanding with the EHS Plus setting tool offers a simple control of the anchoring and provides increased safety Fixing point at hef 25 mm prevents anchor of falling out of the drill hole before being expanded The black fixing point prevents the anchor from falling out of the drill hole during overhead installation Suitable for The EA II is suitable for pre-positioned installation Position the hammerset anchor in the drill hole and drive in flush to the surface of the anchor base using the hammer The sleeve is then expanded by driving in the internal bolt with the EHS Plus setting tool (alternative: EMS machine setting tool), and expanded against the drill hole wall The setting tools must sit on the rim of the anchor to ensure correct expansion Building materials Approved for: Concrete C20/25 to C50/60, cracked, for the multiple fixings of non-load-bearing systems Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Pipelines and ventilation ducts Sprinkler systems Cable conduits and wires Gratings Steel constructions Machines Consoles Shuttering props ds: dsc: kts: strike anchor electrolytically galvanised steel kpn: EA II M12x50 kpn_dash: kpn_clear: EAIIM12x50 bkpn: FISCHER EA II M12x50 bkpn_clear: FISCHER EAIIM12x50 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 48406 sr_ns: FISCHER48406
r: 87940019 p: 0.41 pid: 17145 b: FISCHER q: 0 st: lt: 1 ean: 4006209482841 sr: FISCHER 48284 sr_no_br: 48284 sr_no_br_cl: 48284 sr_cl: FISCHER48284 sr_dash: sold: 164 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 8 mm Drilling diameter 10 mm n: FISCHER EA II M8x30 weft anchor zinc plated - 48284 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The internally threaded anchor with a rim for simple Hammerset installation. The fischer Hammerset anchor EA II is an internal threaded anchor made of zinc-plated steel. The Hammerset anchor is set flush to the surface of the anchoring base using the hammer. With the setting tool EHS Plus or the machine setting tool EMS the sleeve is expanded by driving in the internal rod and expands against the drill hole wall. For correct expansion to take place, no torque must be applied to the screw or the threaded rod. The fischer Hammerset anchor EA II is ideal for fixing sprinkler systems, gratings, and consoles in internal areas with approval. Simple Hammerset installation: no slippage during assembly due to the pronounced edge on the anchor sleeve Use of standard metric screws and threaded rods lowers complexity Power-saving series installation with machine setting tool EA II S-SDS Visual control due to embossing ETA approval for non-cracked concrete and multiple fixings The embossed rim prevents the anchor sleeve from slipping, thus ensuring a trouble-free hammerset installation The metric internal thread means that it is possible to use standard screws or threaded rods for the ideal adaptation to suit the intended use The EMS machine setting tool allows for effortless installation, particularly in the case of series installations The embossing that is applied when expanding with the EHS Plus setting tool offers a simple control of the anchoring and provides increased safety Fixing point at hef 25 mm prevents anchor of falling out of the drill hole before being expanded The black fixing point prevents the anchor from falling out of the drill hole during overhead installation Suitable for The EA II is suitable for pre-positioned installation Position the hammerset anchor in the drill hole and drive in flush to the surface of the anchor base using the hammer The sleeve is then expanded by driving in the internal bolt with the EHS Plus setting tool (alternative: EMS machine setting tool), and expanded against the drill hole wall The setting tools must sit on the rim of the anchor to ensure correct expansion Building materials Approved for: Concrete C20/25 to C50/60, cracked, for the multiple fixings of non-load-bearing systems Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Pipelines and ventilation ducts Sprinkler systems Cable conduits and wires Gratings Steel constructions Machines Consoles Shuttering props ds: dsc: kts: weft anchor zinc plated kpn: EA II M8x30 kpn_dash: kpn_clear: EAIIM8x30 bkpn: FISCHER EA II M8x30 bkpn_clear: FISCHER EAIIM8x30 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 48284 sr_ns: FISCHER48284
r: 22065400 p: 2.87 pid: 176362 b: FISCHER q: 0 st: lt: 8 ean: 4006209436332 sr: FISCHER 43633 sr_no_br: 43633 sr_no_br_cl: 43633 sr_cl: FISCHER43633 sr_dash: sold: 143.5 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 10 mm Drilling diameter 18 mm Overall length 85 mm Material Steel Surface treatment Zinc plated Safety anchor Yes Quantity per blister 10 n: FISCHER 43633 female threaded anchor FIS E 15 x 85 M10 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The versatile fixing system with internal threaded anchors for masonry. The internal threaded anchor FIS E is suitable for use in combination with injection mortars in masonry and aerated concrete. The female threaded anchor FIS E allows demountable anchoring without protruding parts and thus offers optimum flexibility. The metric female thread allows the use of common metric bolts or threaded rods. Please note the approvals of the respective mortar. Common metric bolts and threaded rods can be used. This reduces cost and complexity. Disassembly straight to the surface possible. The fastening point can be reused. ETA approval for maximum safety. The fischer Internal Thread Anchor FIS E made of galvanised steel is the system component of choice for use in masonry with the fischer Injection Mortar. The internal threaded anchor is applied manually, by means of small turning movements. In solid brick, the injection mortar adheres the internal threaded sleeve to the wall of the drilled hole over its entire surface. In perforated materials, the mortar is pushed through the grid of the anchor sleeve, creating a perfectly fitting joint in the perforated brick. As a result, the load is transferred to the building material. The use of female threaded anchors FIS E enables dismantling of the assembly piece in line with the surface. Applications Temporary and removable fixings Anchoring with Injection Mortar FIS V in masonry and aerated concrete Building materials Approved for: Solid sand-lime brick Perforated sand-lime brick Solid brick Solid block of light concrete Perforated brick Hollow lightweight concrete block Solid brick Aerated concrete blocks Also suitable for: Solid and lightweight concrete blocks Solid pumice stone and other solid building materials ds: dsc: kts: female threaded anchor FIS E 15 x 85 M10 kpn: 43633 kpn_dash: kpn_clear: 43633 bkpn: FISCHER 43633 bkpn_clear: FISCHER 43633 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 43633 sr_ns: FISCHER43633
r: 02019171 p: 1.36 pid: 10568 b: FISCHER q: 0 st: lt: 8 ean: 4006209685099 sr: FISCHER 68509 sr_no_br: 68509 sr_no_br_cl: 68509 sr_cl: FISCHER68509 sr_dash: sold: 136 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 10 mm Overall length 146 mm Material Steel Surface treatment Zinc plated Safety anchor No Drilling diameter 12 mm n: FISCHER FSA 12x130/75 B sleeve anchor with nut electrolytically zinc plated - 68509 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The through bolt anchor with nut and washer for structural fixings in non-cracked concrete. The fischer sleeve anchor FSA-B is a zinc-plated steel anchor with nut and washer for structural fixings made of zinc-plated steel. The FSA-B is set in the time-saving through-type installation. When tightening, the cone is pulled into the expansion sleeve and expands it against the hole wall. The recesses act as a crumple zone to take the torque slippage. The fixture is therefore pulled towards the anchoring base. The fischer sleeve anchor FSA-B is ideal for fastening fixings that are not relevant in safety terms such as ladders, gates, and temporary fixings in non-cracked concrete. Simple alignment due to optimised anchor geometry, even in narrow spaces Surface flush removal due to detachable screw connection With nut and washer The optimised geometry minimises setting energy and enables the use in extremely narrow spaces. This allows for user-friendly installation The anchor design makes it possible to use different head shapes for flexible design solutions: Hexagon head (type S), bolt version with nut and washer (type B) The detachable screw connection allows for surface flush removal Suitable for The FSA is suitable for push-through installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall The half-moon shaped recesses act as a crumple zone to take the torque slippage, so that the attachment is pulled onto the anchor base Building materials Suitable for: Concrete C12/15 to C20/25, non-cracked Natural stone with dense structure Application Handrails Consoles Ladders Cable trays Gates Façades Temporary or structural fixings ds: dsc: kts: sleeve anchor with nut electrolytically zinc plated kpn: FSA 12x130/75 B kpn_dash: kpn_clear: FSA12x13075B bkpn: FISCHER FSA 12x130/75 B bkpn_clear: FISCHER FSA12x13075B c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 68509 sr_ns: FISCHER68509
r: 02779424 p: 2.35 pid: 20734 b: FISCHER q: 0 st: lt: 8 ean: 4048962244823 sr: FISCHER 535854 sr_no_br: 535854 sr_no_br_cl: 535854 sr_cl: FISCHER535854 sr_dash: sold: 117.5 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 10 mm Overall length 76 mm Safety anchor No Drilling diameter 15 mm n: FISCHER FH II 15/65-M10 channel plate anchor zinc-plated - 535854 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description Economisch systeem, de bout kan tot vijf maal herbruikt worden Geen uitstekende ankerdelen na demontage van het anker. Dit heeft een hogere veiligheid op de bouwplaats en tijdbesparing tot gevolg Gangbare zeskantbout welke ook wordt gebruikt voor andere applicaties, hierdoor hoeft er niet van montagegereedschap te worden gewisseld Grote onderlegring voor een betere krachtenafdracht Suitable for Ankerbout bestaande uit een bout (staalkwaliteit 8. 8) en vervangingsset (onderlegring, nylon ring, kreukelzone, spreidhulsen onderconus) Uitstekend Suitable for tijdelijke bevestiging van betonwanden middels schoren, maar ook voor permanente Application Na demontage blijven de onderconus en spreidhuls achter in het boorgat, deze onderdelen kunnen tezamen met de spreidhuls, nylon ring en onderlegring nabesteld worden Kleinste afmeting tevens Suitable for de bevestiging van F-beugels in kanaalplaatvloeren Building materials Suitable for: Cavity floor slabs C40/50 Application Diagonal props Panels made of concrete ds: dsc: kts: channel plate anchor zinc-plated kpn: FH II 15/65-M10 kpn_dash: FH II 15/65 kpn_clear: FHII1565M10 bkpn: FISCHER FH II 15/65-M10 bkpn_clear: FISCHER FHII1565M10 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 535854 sr_ns: FISCHER535854
r: 87051396 p: 2.23 pid: 17141 b: FISCHER q: 0 st: lt: 8 ean: 4048962016772 sr: FISCHER 503137 sr_no_br: 503137 sr_no_br_cl: 503137 sr_cl: FISCHER503137 sr_dash: sold: 111.5 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 10 mm Overall length 75 mm Safety anchor Yes Drilling diameter 10 mm n: FISCHER FH II 10/25 SK safety anchor with countersunk head electrolytically galvanised - 503137 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The through bolt anchor with countersunk head in cracked concrete. The fischer high-performance anchor FH II SK with countersunk head is a sleeve anchor made of zinc-plated steel. The anchor is set in the time-saving through-type installation. When tightening the anchor, the cone is pulled into the expansion sleeve and expands it against the hole wall. The black plastic ring prevents the anchor from rotating and absorbs the torque slippage. This means that the fixture is pulled towards the anchoring base. The fischer high-performance anchor FH II SK with countersunk head is ideally suited to fix railings, staircases, and ladders in cracked and non-cracked concrete. With countersunk head for assembly that is flush to the surface The international approvals guarantee maximum safety and maximum performance. Also for applications in earthquake regions (seismic C1 and C2) The ideal combination of screw shank and sleeve enables a high transverse load capacity and fewer fixing points The optimised geometry intelligently reduces the setting energy and thus ensures a force-saving assembly The international approvals guarantee maximum safety and the best performance. The European Technical Assessment even cover use in earthquake zones (seismic C1 and C2) The countersunk finished screw head allows for flush-mounted fixing The design between the bolt and the sleeve ensures high shear load-bearing capacity. Thus, fewer fixing points are required The optimised geometry intelligently reduces the energy required for assembly The approval regulates the use of hollow drills Suitable for The FH II is suitable for push-through installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall The black plastic ring prevents rotation when tightening the anchor, and acts as a crumple zone to take the torque slippage so that the fixture is pulled onto the anchor base Available head shapes for flexible design solutions:Countersunk head (type SK), hexagon head (type S), bolt version with nut and washer (type B) and cap nut (type H) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Guard rails Staircases Consoles Steel constructions Ladders Cable trays Machines Gates Façades Gratings ds: dsc: kts: safety anchor with countersunk head electrolytically galvanised kpn: FH II 10/25 SK kpn_dash: kpn_clear: FHII1025SK bkpn: FISCHER FH II 10/25 SK bkpn_clear: FISCHER FHII1025SK c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 503137 sr_ns: FISCHER503137
r: 02019405 p: 0.54 pid: 11060 b: FISCHER q: 0 st: lt: 5 ean: 4006209483237 sr: FISCHER 48323 sr_no_br: 48323 sr_no_br_cl: 48323 sr_cl: FISCHER48323 sr_dash: sold: 108 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 8 mm Drilling diameter 10 mm n: FISCHER EA II M8x40 weft anchor zinc plated - 48323 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The internally threaded anchor with a rim for simple Hammerset installation. The fischer Hammerset anchor EA II is an internal threaded anchor made of zinc-plated steel. The Hammerset anchor is set flush to the surface of the anchoring base using the hammer. With the setting tool EHS Plus or the machine setting tool EMS the sleeve is expanded by driving in the internal rod and expands against the drill hole wall. For correct expansion to take place, no torque must be applied to the screw or the threaded rod. The fischer Hammerset anchor EA II is ideal for fixing sprinkler systems, gratings, and consoles in internal areas with approval. Simple Hammerset installation: no slippage during assembly due to the pronounced edge on the anchor sleeve Use of standard metric screws and threaded rods lowers complexity Power-saving series installation with machine setting tool EA II S-SDS Visual control due to embossing ETA approval for non-cracked concrete and multiple fixings The embossed rim prevents the anchor sleeve from slipping, thus ensuring a trouble-free hammerset installation The metric internal thread means that it is possible to use standard screws or threaded rods for the ideal adaptation to suit the intended use The EMS machine setting tool allows for effortless installation, particularly in the case of series installations The embossing that is applied when expanding with the EHS Plus setting tool offers a simple control of the anchoring and provides increased safety Fixing point at hef 25 mm prevents anchor of falling out of the drill hole before being expanded The black fixing point prevents the anchor from falling out of the drill hole during overhead installation Suitable for The EA II is suitable for pre-positioned installation Position the hammerset anchor in the drill hole and drive in flush to the surface of the anchor base using the hammer The sleeve is then expanded by driving in the internal bolt with the EHS Plus setting tool (alternative: EMS machine setting tool), and expanded against the drill hole wall The setting tools must sit on the rim of the anchor to ensure correct expansion Building materials Approved for: Concrete C20/25 to C50/60, cracked, for the multiple fixings of non-load-bearing systems Concrete C20/25 to C50/60, non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Pipelines and ventilation ducts Sprinkler systems Cable conduits and wires Gratings Steel constructions Machines Consoles Shuttering props ds: dsc: kts: weft anchor zinc plated kpn: EA II M8x40 kpn_dash: kpn_clear: EAIIM8x40 bkpn: FISCHER EA II M8x40 bkpn_clear: FISCHER EAIIM8x40 c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 48323 sr_ns: FISCHER48323
r: 87051395 p: 2.09 pid: 16046 b: FISCHER q: 0 st: lt: 8 ean: 4048962016765 sr: FISCHER 503136 sr_no_br: 503136 sr_no_br_cl: 503136 sr_cl: FISCHER503136 sr_dash: sold: 104.5 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 10 mm Overall length 65 mm Safety anchor Yes Drilling diameter 10 mm n: FISCHER FH II 10/15 SK safety anchor with countersunk head electrolytically galvanised - 503136 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The through bolt anchor with countersunk head in cracked concrete. The fischer high-performance anchor FH II SK with countersunk head is a sleeve anchor made of zinc-plated steel. The anchor is set in the time-saving through-type installation. When tightening the anchor, the cone is pulled into the expansion sleeve and expands it against the hole wall. The black plastic ring prevents the anchor from rotating and absorbs the torque slippage. This means that the fixture is pulled towards the anchoring base. The fischer high-performance anchor FH II SK with countersunk head is ideally suited to fix railings, staircases, and ladders in cracked and non-cracked concrete. With countersunk head for assembly that is flush to the surface The international approvals guarantee maximum safety and maximum performance. Also for applications in earthquake regions (seismic C1 and C2) The ideal combination of screw shank and sleeve enables a high transverse load capacity and fewer fixing points The optimised geometry intelligently reduces the setting energy and thus ensures a force-saving assembly The international approvals guarantee maximum safety and the best performance. The European Technical Assessment even cover use in earthquake zones (seismic C1 and C2) The countersunk finished screw head allows for flush-mounted fixing The design between the bolt and the sleeve ensures high shear load-bearing capacity. Thus, fewer fixing points are required The optimised geometry intelligently reduces the energy required for assembly The approval regulates the use of hollow drills Suitable for The FH II is suitable for push-through installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall The black plastic ring prevents rotation when tightening the anchor, and acts as a crumple zone to take the torque slippage so that the fixture is pulled onto the anchor base Available head shapes for flexible design solutions:Countersunk head (type SK), hexagon head (type S), bolt version with nut and washer (type B) and cap nut (type H) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Also suitable for: Concrete C12/15 Natural stone with dense structure Application Guard rails Staircases Consoles Steel constructions Ladders Cable trays Machines Gates Façades Gratings ds: dsc: kts: safety anchor with countersunk head electrolytically galvanised kpn: FH II 10/15 SK kpn_dash: kpn_clear: FHII1015SK bkpn: FISCHER FH II 10/15 SK bkpn_clear: FISCHER FHII1015SK c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 503136 sr_ns: FISCHER503136
r: 87051413 p: 0.73 pid: 16320 b: FISCHER q: 0 st: lt: 8 ean: 4006209685228 sr: FISCHER 68522 sr_no_br: 68522 sr_no_br_cl: 68522 sr_cl: FISCHER68522 sr_dash: sold: 73 p_range: none type: standard act: 1 avo: 1 av: Wire dimension 6 mm Overall length 114 mm Material Steel Surface treatment Zinc plated Safety anchor No Drilling diameter 8 mm n: FISCHER FSA 8x110/65 S sleeve anchor with hex bolt electrolytically zinc plated - 68522 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The through bolt anchor with hexagonal screw for structural fixings in non-cracked concrete. The fischer sleeve anchor FSA-S is a zinc-plated steel anchor with hexagonal screw for structural fixings. The FSA-S is set in the time-saving through-type installation. When tightening, the cone is pulled into the expansion sleeve and expands it against the hole wall. The recesses act as a crumple zone to take the torque slippage. The fixture is therefore pulled towards the anchoring base. The fischer sleeve anchor FSA-S is ideal for fastening fixings that are not relevant in safety terms such as consoles, handrails, or cable trays. Simple alignment due to optimised anchor geometry, even in narrow spaces Surface flush removal due to detachable screw connection With hexagon screw The optimised geometry minimises setting energy and enables the use in extremely narrow spaces. This allows for user-friendly installation The anchor design makes it possible to use different head shapes for flexible design solutions: Hexagon head (type S), bolt version with nut and washer (type B) The detachable screw connection allows for surface flush removal Suitable for The FSA is suitable for push-through installation When applying the torque, the cone is pulled into the expansion sleeve and expands it against the drill hole wall The half-moon shaped recesses act as a crumple zone to take the torque slippage, so that the attachment is pulled onto the anchor base Building materials Suitable for: Concrete C12/15 to C20/25, non-cracked Natural stone with dense structure Application Handrails Consoles Ladders Cable trays Gates Façades Temporary or structural fixings ds: dsc: kts: sleeve anchor with hex bolt electrolytically zinc plated kpn: FSA 8x110/65 S kpn_dash: kpn_clear: FSA8x11065S bkpn: FISCHER FSA 8x110/65 S bkpn_clear: FISCHER FSA8x11065S c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 68522 sr_ns: FISCHER68522
r: 02019630 p: 0.43 pid: 95633 b: FISCHER q: 0 st: lt: 8 ean: 4006209901618 sr: FISCHER 90161 sr_no_br: 90161 sr_no_br_cl: 90161 sr_cl: FISCHER90161 sr_dash: sold: 64.5 p_range: none type: standard act: 1 avo: 1 av: n: FISCHER EA M10 N impact anchor - 90161 cn: ANCHOR SLEEVE cn2: ANCHOR SLEEVE cn_clear: ANCHORSLEEVE d: Product description The cost-effective hammerset anchor without approval for multiple fixings in non-structural systems The fischer hammerset anchor EA N is an internal thread anchor made from zinc-plated and stainless steel. The hammerset anchor is ideal for the multiple fixation of non-structural systems that do not require approved anchorage. The assembly of the internal thread anchor is extremely cost-effective thanks to the low embedment depth, fast hammerset installation, and direction-controlled screwing process. The EA N is mounted with the hammer flush to the base material. With the setting tool EA-ST, the sleeve is expanded and braced against the drill hole wall through the driving in of the internal pin. No torque should be applied to the screw to enable correct expansion. Simple hammerset installation The metric internal thread allows for the use of standard screws or threaded rods for ideal adaptation in line with the intended use The hand setting tool EA-ST facilitates fast installation Simple hammerset installation The metric internal thread allows for the use of standard screws or threaded rods for ideal adaptation in line with the intended use The hand setting tool EA-ST facilitates fast installation Suitable for The EA N is suitable for pre-positioned installation Position the hammerset anchor in the drill hole and drive in flush to the surface of the base material using the hammer The setting tool EA-ST is then used to expand the sleeve against the drill hole wall by driving in the internal pin The setting tools must sit on the edge of the anchor to ensure correct expansion Building materials Concrete C12/15, non-cracked Concrete C20/25, non-cracked Application Pipelines Cable trays Consoles ds: dsc: kts: impact anchor kpn: EA M10 N kpn_dash: kpn_clear: EAM10N bkpn: FISCHER EA M10 N bkpn_clear: FISCHER EAM10N c_path: Home / Fasteners and machine components / Fasteners / Anchoring / Anchor sleeve | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer anchoring / Fischer anchor sleeve sr_no_br_cl_ns: 90161 sr_ns: FISCHER90161
