Fein tap collets, centring pins and adapters for QuickIN and QuickIN MAX
Fein tap collets and adapters connect the cutting tool to the machine: collets for tapping, standard collets, centring pins and adapter sleeves that keep the tool centred and firmly held. A large part of the range is made for the QuickIN and QuickIN MAX interface.
Choose a tapping collet by the shank diameter and the square of the tap: sizes run from Ø 4.5 mm with a 3.4 mm square to Ø 11 mm with a 9 mm square. Standard collets come with a 30 mm insertion depth, with collar or with round collar, in Ø 6 mm and 1/4". Central pins of Ø 6.35 mm are available in lengths of 82 and 100 mm, next to centres for core drills. A hole saw adapter drills large holes in metal up to 40 mm through the QuickIN interface. An adapter sleeve for Morse taper MC 4 to MC 3 and a 125 mm dismantling wedge for drill chucks up to B 12 complete the range.
First check which interface the machine has, then pick the collet to match the size of the tool. These parts belong to the Fein machining tools, the range for drilling, cutting and finishing metal.
- Max. clamping capacity: 9 mm
- Max. clamping capacity: 6 mm
- Max. clamping capacity: 10 mm
- Max. clamping capacity: 11 mm
- Diameter: 6,35 mm
- Length: 100 mm
- Max. clamping capacity: 6 mm
- Max. clamping capacity: 1/4 inch
- Shank size: MK4
- Shank type: Morse taper - external
- Tool holder size: MK3
- Diameter: 6,35 mm
- Length: 82 mm
- Length: 85 mm
- Shank size: MK3
- Shank type: Morse taper - external
- Tool holder size: MK3
- Length: 100 mm