r: 57991775 p: 19.14 pid: 36207 b: PFERD q: 0 st: lt: 15 ean: 4007220153215 sr: PFERD 43201003 sr_no_br: 43201003 sr_no_br_cl: 43201003 sr_cl: PFERD43201003 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 30 mm Connection type (machine) Shank Material (brush filament) Stainless steel Wire thickness 0,5 mm Twisted No Height 70 mm Connection size (machine) 6 mm n: PFERD PBU 3029/6 INOX 0,50 brush unturned Ø 30 mm pin-Ø 6 mm stainless steel wire-Ø 0.50 - 43201003 cn: BRUSCH APPLICATOR cn2: BRUSCH APPLICATOR cn_clear: BRUSCHAPPLICATOR d: Product description PFERD End brush crimped PBU dia. 30 mm shank dia. 6 mm stainless steel wire dia. 0.50 Characteristics Suitable for light brushing such as deburring, cleaning and derusting End brush with plastic-covered brush body In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Optimal access to hard-to-reach areas such as drilled holes and cavities as the filament spreads out upon rotation. The plastic covering prevents the risk of corrosion. Very good corrosion resistance. Creates fine surfaces. ds: dsc: kts: brush unturned Ø 30 mm pin-Ø 6 mm stainless steel wire-Ø 0.50 kpn: PBU 3029/6 INOX 0,50 kpn_dash: kpn_clear: PBU30296INOX050 bkpn: PFERD PBU 3029/6 INOX 0,50 bkpn_clear: PFERD PBU30296INOX050 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Detail brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd detail brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43201003 sr_ns: PFERD43201003
r: 57991776 p: 19.14 pid: 36212 b: PFERD q: 0 st: lt: 15 ean: 4007220530955 sr: PFERD 43201007 sr_no_br: 43201007 sr_no_br_cl: 43201007 sr_cl: PFERD43201007 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 30 mm Connection type (machine) Shank Material (brush filament) Stainless steel Wire thickness 0,2 mm Twisted No Height 70 mm Connection size (machine) 6 mm n: PFERD PBU 3029/6 INOX 0,20 brush unturned Ø 30 mm pin-Ø 6 mm stainless steel wire-Ø 0.20 - 43201007 cn: BRUSCH APPLICATOR cn2: BRUSCH APPLICATOR cn_clear: BRUSCHAPPLICATOR d: Product description PFERD End brush crimped PBU dia. 30 mm shank dia. 6 mm stainless steel wire dia. 0.20 Characteristics Suitable for light brushing such as deburring, cleaning and derusting End brush with plastic-covered brush body In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Optimal access to hard-to-reach areas such as drilled holes and cavities as the filament spreads out upon rotation. The plastic covering prevents the risk of corrosion. Very good corrosion resistance. Creates fine surfaces. ds: dsc: kts: brush unturned Ø 30 mm pin-Ø 6 mm stainless steel wire-Ø 0.20 kpn: PBU 3029/6 INOX 0,20 kpn_dash: kpn_clear: PBU30296INOX020 bkpn: PFERD PBU 3029/6 INOX 0,20 bkpn_clear: PFERD PBU30296INOX020 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Detail brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd detail brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43201007 sr_ns: PFERD43201007
r: 08077725 p: 18.61 pid: 34519 b: PFERD q: 0 st: lt: 8 ean: 4007220579107 sr: PFERD 43210003 sr_no_br: 43210003 sr_no_br_cl: 43210003 sr_cl: PFERD43210003 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 50 mm Connection type (machine) Shank Material (brush filament) Stainless steel Wire thickness 0,3 mm Twisted No Height 75 mm Connection size (machine) 6 mm n: PFERD TBU 5010/6 INOX 0,30 cup brush unturned Ø 50 mm pin-Ø 6 mm stainless steel wire-Ø 0.30 - 43210003 cn: BRUSCH APPLICATOR cn2: BRUSCH APPLICATOR cn_clear: BRUSCHAPPLICATOR d: Product description PFERD Cup brush crimped TBU dia. 50 mm shank dia. 6 mm stainless steel wire dia. 0.30 (10) Characteristics Generally suitable for cleaning, derusting and smoothing, as well as removal of corrosion and paint Particularly suitable for brushing on large, flat and easily accessible surfaces due to face-down use with the entire brush face applied to the workpiece In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Cup brush with plastic-covered brush body Advantages: Low risk of contaminating the workpiece. Highly flexible, enabling optimal adjustment to the workpiece contour. Very good corrosion resistance. Creates fine surfaces. ds: dsc: kts: cup brush unturned Ø 50 mm pin-Ø 6 mm stainless steel wire-Ø 0.30 kpn: TBU 5010/6 INOX 0,30 kpn_dash: kpn_clear: TBU50106INOX030 bkpn: PFERD TBU 5010/6 INOX 0,30 bkpn_clear: PFERD TBU50106INOX030 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Detail brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd detail brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43210003 sr_ns: PFERD43210003
r: 08077639 p: 18.48 pid: 34141 b: PFERD q: 0 st: lt: 8 ean: 4007220220696 sr: PFERD 43204004 sr_no_br: 43204004 sr_no_br_cl: 43204004 sr_cl: PFERD43204004 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 10 mm Connection type (machine) Shank Material (brush filament) Silicon carbide Wire thickness 0,9 mm Twisted No Height 65 mm Connection size (machine) 6 mm n: PFERD PBU 1010/6 SiC 180 0,90 brush unturned Ø 10 mm pin-Ø 6 mm SiC filament wire-Ø 0.90 grit 180 - 43204004 cn: BRUSCH APPLICATOR cn2: BRUSCH APPLICATOR cn_clear: BRUSCHAPPLICATOR d: Product description PFERD End brush crimped PBU dia. 10 mm shank dia. 6 mm SiC filament dia. 0.90 grit 180 Characteristics Suitable for light brushing such as deburring, cleaning and derusting Brushes with silicon carbide (SiC) are particularly well suited to deburring work and surface improvement Plastic filament withstands temperatures up to 220 °C Advantages: Optimal access to hard-to-reach areas such as drilled holes and cavities as the filament spreads out upon rotation. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. ds: dsc: kts: brush unturned Ø 10 mm pin-Ø 6 mm SiC filament wire-Ø 0.90 grit 180 kpn: PBU 1010/6 SiC 180 0,90 kpn_dash: kpn_clear: PBU10106SiC180090 bkpn: PFERD PBU 1010/6 SiC 180 0,90 bkpn_clear: PFERD PBU10106SiC180090 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Detail brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd detail brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43204004 sr_ns: PFERD43204004
r: 08077644 p: 16.25 pid: 35317 b: PFERD q: 0 st: lt: 8 ean: 4007220598030 sr: PFERD 43204109 sr_no_br: 43204109 sr_no_br_cl: 43204109 sr_cl: PFERD43204109 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 13 mm Connection type (machine) Shank Material (brush filament) Stainless steel Wire thickness 0,15 mm Twisted No Height 65 mm Connection size (machine) 6 mm n: PFERD PBU 1312/6 INOX 0,15 brush unturned Ø 13 mm pin-Ø 6 mm stainless steel wire-Ø 0.15 - 43204109 cn: BRUSCH APPLICATOR cn2: BRUSCH APPLICATOR cn_clear: BRUSCHAPPLICATOR d: Product description PFERD End brush crimped PBU dia. 13 mm shank dia. 6 mm stainless steel wire dia. 0.15 Characteristics Suitable for light brushing such as deburring, cleaning and derusting End brush with plastic-covered brush body In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Optimal access to hard-to-reach areas such as drilled holes and cavities as the filament spreads out upon rotation. The plastic covering prevents the risk of corrosion. Very good corrosion resistance. Creates fine surfaces. ds: dsc: kts: brush unturned Ø 13 mm pin-Ø 6 mm stainless steel wire-Ø 0.15 kpn: PBU 1312/6 INOX 0,15 kpn_dash: kpn_clear: PBU13126INOX015 bkpn: PFERD PBU 1312/6 INOX 0,15 bkpn_clear: PFERD PBU13126INOX015 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Detail brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd detail brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43204109 sr_ns: PFERD43204109
r: 08077696 p: 15.8 pid: 35075 b: PFERD q: 0 st: lt: 8 ean: 4007220531037 sr: PFERD 43213004 sr_no_br: 43213004 sr_no_br_cl: 43213004 sr_cl: PFERD43213004 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 20 mm Connection type (machine) Shank Material (brush filament) Stainless steel Wire thickness 0,2 mm Twisted No Height 70 mm Connection size (machine) 6 mm n: PFERD PBUR 2022/6 INOX 0,20 brush with support ring unturned Ø 20 mm pin-Ø 6 mm stainless steel wire-Ø 0.20 - 43213004 cn: BRUSCH APPLICATOR cn2: BRUSCH APPLICATOR cn_clear: BRUSCHAPPLICATOR d: Product description PFERD End brush with bridle crimped PBUR dia. 20 mm shank dia. 6 mm stainless steel wire dia. 0.20 Characteristics Suitable for light brushing such as deburring, cleaning and derusting End brush with plastic-covered brush body In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. The bridle prevents the wires spreading out sideways. The bridle enables the spreading out and flexibility of the brush filament to be strictly controlled. Optimal access to hard-to-reach areas such as recesses and drilled holes. The plastic covering prevents the risk of corrosion. If the filament has worn away down to the bridle, it can be removed from the bridle for further use. This does not affect the brushing behaviour. Very good corrosion resistance. Creates fine surfaces. ds: dsc: kts: brush with support ring unturned Ø 20 mm pin-Ø 6 mm stainless steel wire-Ø 0.20 kpn: PBUR 2022/6 INOX 0,20 kpn_dash: kpn_clear: PBUR20226INOX020 bkpn: PFERD PBUR 2022/6 INOX 0,20 bkpn_clear: PFERD PBUR20226INOX020 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Detail brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd detail brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43213004 sr_ns: PFERD43213004
r: 57991774 p: 15.5 pid: 36944 b: PFERD q: 0 st: lt: 8 ean: 4007220598054 sr: PFERD 43202011 sr_no_br: 43202011 sr_no_br_cl: 43202011 sr_cl: PFERD43202011 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 20 mm Connection type (machine) Shank Material (brush filament) Stainless steel Wire thickness 0,15 mm Twisted No Height 70 mm Connection size (machine) 6 mm n: PFERD PBU 2022/6 INOX 0,15 brush unturned Ø 20 mm pin-Ø 6 mm stainless steel wire-Ø 0.15 - 43202011 cn: BRUSCH APPLICATOR cn2: BRUSCH APPLICATOR cn_clear: BRUSCHAPPLICATOR d: Product description PFERD End brush crimped PBU dia. 20 mm shank dia. 6 mm stainless steel wire dia. 0.15 Characteristics Suitable for light brushing such as deburring, cleaning and derusting End brush with plastic-covered brush body In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Optimal access to hard-to-reach areas such as drilled holes and cavities as the filament spreads out upon rotation. The plastic covering prevents the risk of corrosion. Very good corrosion resistance. Creates fine surfaces. ds: dsc: kts: brush unturned Ø 20 mm pin-Ø 6 mm stainless steel wire-Ø 0.15 kpn: PBU 2022/6 INOX 0,15 kpn_dash: kpn_clear: PBU20226INOX015 bkpn: PFERD PBU 2022/6 INOX 0,15 bkpn_clear: PFERD PBU20226INOX015 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Detail brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd detail brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43202011 sr_ns: PFERD43202011
r: 08077747 p: 15.21 pid: 34531 b: PFERD q: 0 st: lt: 8 ean: 4007220033067 sr: PFERD 43200354 sr_no_br: 43200354 sr_no_br_cl: 43200354 sr_cl: PFERD43200354 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 5 mm Connection type (machine) Shank Material (brush filament) Silicon carbide Wire thickness 0,55 mm Twisted No Height 45 mm Connection size (machine) 3 mm n: PFERD PBU 0505/3 SiC 320 0,55 miniature brush brush Ø 5 mm shank Ø 3 mm SiC filament wire Ø 0.55 mm grit 320 - 43200354 cn: BRUSCH APPLICATOR cn2: BRUSCH APPLICATOR cn_clear: BRUSCHAPPLICATOR d: Product description PFERD Miniature end brush PBU dia. 5 mm shank dia. 3 mm SiC filament dia. 0.55 mm grit 320 Characteristics Suitable for light brushing such as deburring, cleaning and polishing PFERD offers a wide range of miniature brushes for precision work These can be used on flexible shaft drives, micro motors or electric grinders Brushes with silicon carbide (SiC) are particularly well suited to deburring work and surface improvement Plastic filament withstands temperatures up to 220 °C Advantages: Maximum precision and efficiency in work on delicate workpieces. Optimal access to hard-to-reach areas such as drilled holes and cavities as the filament spreads out upon rotation. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. ds: dsc: kts: miniature brush brush Ø 5 mm shank Ø 3 mm SiC filament wire Ø 0.55 mm grit 320 kpn: PBU 0505/3 SiC 320 0,55 kpn_dash: kpn_clear: PBU05053SiC320055 bkpn: PFERD PBU 0505/3 SiC 320 0,55 bkpn_clear: PFERD PBU05053SiC320055 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Detail brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd detail brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43200354 sr_ns: PFERD43200354
r: 08077739 p: 15.21 pid: 34287 b: PFERD q: 0 st: lt: 8 ean: 4007220033050 sr: PFERD 43200361 sr_no_br: 43200361 sr_no_br_cl: 43200361 sr_cl: PFERD43200361 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 5 mm Connection type (machine) Shank Material (brush filament) Plastic Wire thickness 0,5 mm Twisted No Height 45 mm Connection size (machine) 3 mm n: PFERD PBU 0505/3 AO 320 0,50 miniature brush brush Ø 5 mm shank Ø 3 mm aluminium oxide filament wire Ø 0.50 mm grit 320 - 43200361 cn: BRUSCH APPLICATOR cn2: BRUSCH APPLICATOR cn_clear: BRUSCHAPPLICATOR d: Product description PFERD Miniature end brush PBU dia. 5 mm shank dia. 3 mm aluminium oxide filament dia. 0.50 mm grit 320 Characteristics Suitable for light brushing such as deburring, cleaning and polishing PFERD offers a wide range of miniature brushes for precision work These can be used on flexible shaft drives, micro motors or electric grinders Brushes with aluminium oxide (AO) are less sharp-edged and aggressive compared with SiC They are primarily suitable for polishing and smoothing finishes on soft metals Plastic filament withstands temperatures up to 220 °C Advantages: Maximum precision and efficiency in work on delicate workpieces. Optimal access to hard-to-reach areas such as drilled holes and cavities as the filament spreads out upon rotation. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. ds: dsc: kts: miniature brush brush Ø 5 mm shank Ø 3 mm aluminium oxide filament wire Ø 0.50 mm grit 320 kpn: PBU 0505/3 AO 320 0,50 kpn_dash: kpn_clear: PBU05053AO320050 bkpn: PFERD PBU 0505/3 AO 320 0,50 bkpn_clear: PFERD PBU05053AO320050 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Detail brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd detail brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43200361 sr_ns: PFERD43200361
r: 08077728 p: 15.21 pid: 35105 b: PFERD q: 0 st: lt: 8 ean: 4007220032947 sr: PFERD 43200311 sr_no_br: 43200311 sr_no_br_cl: 43200311 sr_cl: PFERD43200311 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 5 mm Connection type (machine) Shank Material (brush filament) Plastic Wire thickness 0,5 mm Twisted No Height 45 mm Connection size (machine) 2,34 mm n: PFERD PBU 0505/2,34 AO 320 0,50 miniature brush brush Ø 5 mm shank-Ø 2.34 mm aluminium oxide filament wire-Ø 0.50 mm grit 320 - 43200311 cn: BRUSCH APPLICATOR cn2: BRUSCH APPLICATOR cn_clear: BRUSCHAPPLICATOR d: Product description PFERD Miniature end brush PBU dia. 5 mm shank dia. 2.34 mm aluminium oxide filament dia. 0.50 mm grit 320 Characteristics Suitable for light brushing such as deburring, cleaning and polishing PFERD offers a wide range of miniature brushes for precision work These can be used on flexible shaft drives, micro motors or electric grinders Brushes with aluminium oxide (AO) are less sharp-edged and aggressive compared with SiC They are primarily suitable for polishing and smoothing finishes on soft metals Plastic filament withstands temperatures up to 220 °C Advantages: Maximum precision and efficiency in work on delicate workpieces. Optimal access to hard-to-reach areas such as drilled holes and cavities as the filament spreads out upon rotation. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. ds: dsc: kts: miniature brush brush Ø 5 mm shank-Ø 2.34 mm aluminium oxide filament wire-Ø 0.50 mm grit 320 kpn: PBU 0505/2,34 AO 320 0,50 kpn_dash: kpn_clear: PBU0505234AO320050 bkpn: PFERD PBU 0505/2,34 AO 320 0,50 bkpn_clear: PFERD PBU0505234AO320050 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Detail brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd detail brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43200311 sr_ns: PFERD43200311
r: 08077748 p: 15.21 pid: 34305 b: PFERD q: 0 st: lt: 8 ean: 4007220033074 sr: PFERD 43200355 sr_no_br: 43200355 sr_no_br_cl: 43200355 sr_cl: PFERD43200355 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 5 mm Connection type (machine) Shank Material (brush filament) Silicon carbide Wire thickness 0,25 mm Twisted No Height 45 mm Connection size (machine) 3 mm n: PFERD PBU 0505/3 SiC 800 0,25 miniature brush brush Ø 5 mm shank Ø 3 mm SiC filament wire Ø 0.25 grit 800 - 43200355 cn: BRUSCH APPLICATOR cn2: BRUSCH APPLICATOR cn_clear: BRUSCHAPPLICATOR d: Product description PFERD Miniature end brush PBU dia. 5 mm shank dia. 3 mm SiC filament dia. 0.25 grit 800 Characteristics Suitable for light brushing such as deburring, cleaning and polishing PFERD offers a wide range of miniature brushes for precision work These can be used on flexible shaft drives, micro motors or electric grinders Brushes with silicon carbide (SiC) are particularly well suited to deburring work and surface improvement Plastic filament withstands temperatures up to 220 °C Advantages: Maximum precision and efficiency in work on delicate workpieces. Optimal access to hard-to-reach areas such as drilled holes and cavities as the filament spreads out upon rotation. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. ds: dsc: kts: miniature brush brush Ø 5 mm shank Ø 3 mm SiC filament wire Ø 0.25 grit 800 kpn: PBU 0505/3 SiC 800 0,25 kpn_dash: kpn_clear: PBU05053SiC800025 bkpn: PFERD PBU 0505/3 SiC 800 0,25 bkpn_clear: PFERD PBU05053SiC800025 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Detail brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd detail brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43200355 sr_ns: PFERD43200355
r: 08077740 p: 15.21 pid: 34292 b: PFERD q: 0 st: lt: 8 ean: 4007220033043 sr: PFERD 43200360 sr_no_br: 43200360 sr_no_br_cl: 43200360 sr_cl: PFERD43200360 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 5 mm Connection type (machine) Shank Material (brush filament) Plastic Wire thickness 0,3 mm Twisted No Height 45 mm Connection size (machine) 3 mm n: PFERD PBU 0505/3 AO 600 0,30 miniature brush brush Ø 5 mm shank Ø 3 mm aluminium oxide filament wire Ø 0.30 grit 600 - 43200360 cn: BRUSCH APPLICATOR cn2: BRUSCH APPLICATOR cn_clear: BRUSCHAPPLICATOR d: Product description PFERD Miniature end brush PBU dia. 5 mm shank dia. 3 mm aluminium oxide filament dia. 0.30 grit 600 Characteristics Suitable for light brushing such as deburring, cleaning and polishing PFERD offers a wide range of miniature brushes for precision work These can be used on flexible shaft drives, micro motors or electric grinders Brushes with aluminium oxide (AO) are less sharp-edged and aggressive compared with SiC They are primarily suitable for polishing and smoothing finishes on soft metals Plastic filament withstands temperatures up to 220 °C Advantages: Maximum precision and efficiency in work on delicate workpieces. Optimal access to hard-to-reach areas such as drilled holes and cavities as the filament spreads out upon rotation. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. ds: dsc: kts: miniature brush brush Ø 5 mm shank Ø 3 mm aluminium oxide filament wire Ø 0.30 grit 600 kpn: PBU 0505/3 AO 600 0,30 kpn_dash: kpn_clear: PBU05053AO600030 bkpn: PFERD PBU 0505/3 AO 600 0,30 bkpn_clear: PFERD PBU05053AO600030 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Detail brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd detail brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43200360 sr_ns: PFERD43200360
r: 08077729 p: 15.21 pid: 34271 b: PFERD q: 0 st: lt: 8 ean: 4007220032930 sr: PFERD 43200310 sr_no_br: 43200310 sr_no_br_cl: 43200310 sr_cl: PFERD43200310 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 5 mm Connection type (machine) Shank Material (brush filament) Plastic Wire thickness 0,3 mm Twisted No Height 45 mm Connection size (machine) 2,34 mm n: PFERD PBU 0505/2,34 AO 600 0,30 miniature brush brush Ø 5 mm shank-Ø 2.34 mm aluminium oxide filament wire-Ø 0.30 grit 600 - 43200310 cn: BRUSCH APPLICATOR cn2: BRUSCH APPLICATOR cn_clear: BRUSCHAPPLICATOR d: Product description PFERD Miniature end brush PBU dia. 5 mm shank dia. 2.34 mm aluminium oxide filament dia. 0.30 grit 600 Characteristics Suitable for light brushing such as deburring, cleaning and polishing PFERD offers a wide range of miniature brushes for precision work These can be used on flexible shaft drives, micro motors or electric grinders Brushes with aluminium oxide (AO) are less sharp-edged and aggressive compared with SiC They are primarily suitable for polishing and smoothing finishes on soft metals Plastic filament withstands temperatures up to 220 °C Advantages: Maximum precision and efficiency in work on delicate workpieces. Optimal access to hard-to-reach areas such as drilled holes and cavities as the filament spreads out upon rotation. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. ds: dsc: kts: miniature brush brush Ø 5 mm shank-Ø 2.34 mm aluminium oxide filament wire-Ø 0.30 grit 600 kpn: PBU 0505/2,34 AO 600 0,30 kpn_dash: kpn_clear: PBU0505234AO600030 bkpn: PFERD PBU 0505/2,34 AO 600 0,30 bkpn_clear: PFERD PBU0505234AO600030 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Detail brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd detail brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43200310 sr_ns: PFERD43200310
r: 08077736 p: 15.21 pid: 36864 b: PFERD q: 0 st: lt: 8 ean: 4007220032961 sr: PFERD 43200305 sr_no_br: 43200305 sr_no_br_cl: 43200305 sr_cl: PFERD43200305 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 5 mm Connection type (machine) Shank Material (brush filament) Silicon carbide Wire thickness 0,25 mm Twisted No Height 45 mm Connection size (machine) 2,34 mm n: PFERD PBU 0505/2,34 SiC 800 0,25 miniature brush brush Ø 5 mm shank-Ø 2.34 mm SiC filament wire-Ø 0.25 grit 800 - 43200305 cn: BRUSCH APPLICATOR cn2: BRUSCH APPLICATOR cn_clear: BRUSCHAPPLICATOR d: Product description PFERD Miniature end brush PBU dia. 5 mm shank dia. 2.34 mm SiC filament dia. 0.25 grit 800 Characteristics Suitable for light brushing such as deburring, cleaning and polishing PFERD offers a wide range of miniature brushes for precision work These can be used on flexible shaft drives, micro motors or electric grinders Brushes with silicon carbide (SiC) are particularly well suited to deburring work and surface improvement Plastic filament withstands temperatures up to 220 °C Advantages: Maximum precision and efficiency in work on delicate workpieces. Optimal access to hard-to-reach areas such as drilled holes and cavities as the filament spreads out upon rotation. Abrasive grains are embedded in flexible plastic filaments, which means that the filament works on the sides as well as at the tip. ds: dsc: kts: miniature brush brush Ø 5 mm shank-Ø 2.34 mm SiC filament wire-Ø 0.25 grit 800 kpn: PBU 0505/2,34 SiC 800 0,25 kpn_dash: kpn_clear: PBU0505234SiC800025 bkpn: PFERD PBU 0505/2,34 SiC 800 0,25 bkpn_clear: PFERD PBU0505234SiC800025 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Detail brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd detail brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43200305 sr_ns: PFERD43200305
r: 08077643 p: 14.77 pid: 34145 b: PFERD q: 0 st: lt: 8 ean: 4007220807002 sr: PFERD 43218011 sr_no_br: 43218011 sr_no_br_cl: 43218011 sr_cl: PFERD43218011 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 12 mm Connection type (machine) Shank Material (brush filament) Steel wire Wire thickness 0,2 mm Twisted Yes Height 71 mm Connection size (machine) 6 mm n: PFERD PBGS 1210/6 ST 0,20 singletwist brush twisted Ø12 mm pin-Ø6 mm steel wire-Ø0.20 - 43218011 cn: BRUSCH APPLICATOR cn2: BRUSCH APPLICATOR cn_clear: BRUSCHAPPLICATOR d: Product description PFERD SINGLETWIST end brush knotted PBGS dia. 12 mm shank dia. 6 mm steel wire dia. 0.20 Characteristics Particularly flexible single-knot brush for special applications Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Advantages: Optimal access to hard-to-reach areas such as inside corners, as the knot is less likely to unravel. Long tool life through use of PFERD special wire. ds: dsc: kts: singletwist brush twisted Ø12 mm pin-Ø6 mm steel wire-Ø0.20 kpn: PBGS 1210/6 ST 0,20 kpn_dash: kpn_clear: PBGS12106ST020 bkpn: PFERD PBGS 1210/6 ST 0,20 bkpn_clear: PFERD PBGS12106ST020 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Detail brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd detail brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43218011 sr_ns: PFERD43218011
r: 08136930 p: 14.5 pid: 179896 b: MILWAUKEE q: 0 st: lt: 8 ean: 4058546644406 sr: MILWAUKEE 4932501724 sr_no_br: 4932501724 sr_no_br_cl: 4932501724 sr_cl: MILWAUKEE4932501724 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 30 mm Connection type (machine) Shank Material (brush filament) Steel wire Wire thickness 0,3 mm Height 68 mm Connection size (machine) 6 mm n: MILWAUKEE 4932501724 end brush S6 30x25x68mm steel crimped 0.3mm (3 pcs) cn: BRUSCH APPLICATOR cn2: BRUSCH APPLICATOR cn_clear: BRUSCHAPPLICATOR d: Product description End brushes with crimped wire are used for light brushing such as cleaning corners, holes and moulds and for removing paint and rubber residues. Best access to hard to reach areas such as drilled holes and cavities because the wires spread out / flare during rotation. Ideal wire distribution for smooth, low vibration running. Tight design for a longer life. Suitable for straight grinders with max RPM between 18,000 - 20,000. ds: MILWAUKEE® Work Hard, Play Hard promotion Receive a FREE radio or speaker ! Promotion valid from March 1 to May 31, 2026. Spend at least €449 excl. VAT on MILWAUKEE® products and receive a free radio or speaker. How does it work? Spend a minimum of €449 excl. VAT on MILWAUKEE® products in March, April or May. Register your purchase via the official promotion page . Registration is possible until June 14, 2026 . The invoice date must be between 01.03.2026 and 31.05.2026 . After approval of your registration, you will receive the radio or speaker within 30 days , shipped directly by Milwaukee. Maximum of 1 radio or speaker per customer per month . Please note: You can only submit one invoice per registration; combining invoices is not possible. Which radio or speaker can you receive? Free M12 SPEJSG2-0 (4933498433) with purchases from €449 excl. VAT. Free M18 SPEJSG2-0 (4933493530) with purchases from €749 excl. VAT. Free M18 RADDAB+ G2-0 (4933492344) with purchases from €1,049 excl. VAT. Free M18 RC-0 (4933446639) with purchases from €1,399 excl. VAT. Free M18 PRCDAB+-0 (4933472112) with purchases from €1,799 excl. VAT. dsc: kts: end brush S6 30x25x68mm steel crimped 0.3mm (3 pcs) kpn: 4932501724 kpn_dash: kpn_clear: 4932501724 bkpn: MILWAUKEE 4932501724 bkpn_clear: MILWAUKEE 4932501724 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Detail brush | Home / Promotions / Promotions / Brand promotions / Milwaukee promotions / Milwaukee work hard, play hard 2026 | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Detail brush | Home / Our brands / Milwaukee / Milwaukee tools / Milwaukee machining tools / Milwaukee surface treatment / Milwaukee sanding, sharpening, polishing and deburring / Milwaukee detail brush sr_no_br_cl_ns: 4932501724 sr_ns: MILWAUKEE4932501724
r: 08136929 p: 14.5 pid: 179876 b: MILWAUKEE q: 0 st: lt: 8 ean: 4058546644390 sr: MILWAUKEE 4932501723 sr_no_br: 4932501723 sr_no_br_cl: 4932501723 sr_cl: MILWAUKEE4932501723 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 22 mm Connection type (machine) Shank Material (brush filament) Stainless steel Wire thickness 0,3 mm Height 68 mm Connection size (machine) 6 mm n: MILWAUKEE 4932501723 end brush S6 22x25x68mm stainless steel crimped 0.3mm (3 pcs) cn: BRUSCH APPLICATOR cn2: BRUSCH APPLICATOR cn_clear: BRUSCHAPPLICATOR d: Product description End brushes with crimped wire are used for light brushing such as cleaning corners, holes and moulds and for removing paint and rubber residues. Best access to hard to reach areas such as drilled holes and cavities because the wires spread out / flare during rotation. Ideal wire distribution for smooth, low vibration running. Tight design for a longer life. Suitable for straight grinders with max RPM between 18,000 - 20,000. ds: MILWAUKEE® Work Hard, Play Hard promotion Receive a FREE radio or speaker ! Promotion valid from March 1 to May 31, 2026. Spend at least €449 excl. VAT on MILWAUKEE® products and receive a free radio or speaker. How does it work? Spend a minimum of €449 excl. VAT on MILWAUKEE® products in March, April or May. Register your purchase via the official promotion page . Registration is possible until June 14, 2026 . The invoice date must be between 01.03.2026 and 31.05.2026 . After approval of your registration, you will receive the radio or speaker within 30 days , shipped directly by Milwaukee. Maximum of 1 radio or speaker per customer per month . Please note: You can only submit one invoice per registration; combining invoices is not possible. Which radio or speaker can you receive? Free M12 SPEJSG2-0 (4933498433) with purchases from €449 excl. VAT. Free M18 SPEJSG2-0 (4933493530) with purchases from €749 excl. VAT. Free M18 RADDAB+ G2-0 (4933492344) with purchases from €1,049 excl. VAT. Free M18 RC-0 (4933446639) with purchases from €1,399 excl. VAT. Free M18 PRCDAB+-0 (4933472112) with purchases from €1,799 excl. VAT. dsc: kts: end brush S6 22x25x68mm stainless steel crimped 0.3mm (3 pcs) kpn: 4932501723 kpn_dash: kpn_clear: 4932501723 bkpn: MILWAUKEE 4932501723 bkpn_clear: MILWAUKEE 4932501723 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Detail brush | Home / Promotions / Promotions / Brand promotions / Milwaukee promotions / Milwaukee work hard, play hard 2026 | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Detail brush | Home / Our brands / Milwaukee / Milwaukee tools / Milwaukee machining tools / Milwaukee surface treatment / Milwaukee sanding, sharpening, polishing and deburring / Milwaukee detail brush sr_no_br_cl_ns: 4932501723 sr_ns: MILWAUKEE4932501723
r: 08077711 p: 14.49 pid: 35084 b: PFERD q: 0 st: lt: 10 ean: 4007220531006 sr: PFERD 43214001 sr_no_br: 43214001 sr_no_br_cl: 43214001 sr_cl: PFERD43214001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 25 mm Connection type (machine) Shank Material (brush filament) Steel wire Wire thickness 0,2 mm Twisted No Height 70 mm Connection size (machine) 6 mm n: PFERD PBUR 2530/6 ST 0,20 brush with support ring unturned Ø 25 mm pin-Ø 6 mm steel wire-Ø 0.20 - 43214001 cn: BRUSCH APPLICATOR cn2: BRUSCH APPLICATOR cn_clear: BRUSCHAPPLICATOR d: Product description PFERD End brush with bridle crimped PBUR dia. 25 mm shank dia. 6 mm steel wire dia. 0.20 Characteristics Suitable for light brushing such as deburring, cleaning and derusting Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Advantages: The bridle prevents the wires spreading out sideways. The bridle enables the spreading out and flexibility of the brush filament to be strictly controlled. Optimal access to hard-to-reach areas such as recesses and drilled holes. If the filament has worn away down to the bridle, it can be removed from the bridle for further use. This does not affect the brushing behaviour. Long tool life through use of PFERD special wire. Creates fine surfaces. ds: dsc: kts: brush with support ring unturned Ø 25 mm pin-Ø 6 mm steel wire-Ø 0.20 kpn: PBUR 2530/6 ST 0,20 kpn_dash: kpn_clear: PBUR25306ST020 bkpn: PFERD PBUR 2530/6 ST 0,20 bkpn_clear: PFERD PBUR25306ST020 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Detail brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd detail brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43214001 sr_ns: PFERD43214001
r: 04023425 p: 13.99 pid: 38484 b: PFERD q: 0 st: lt: 8 ean: 4007220153352 sr: PFERD 43211001 sr_no_br: 43211001 sr_no_br_cl: 43211001 sr_cl: PFERD43211001 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 60 mm Connection type (machine) Shank Material (brush filament) Steel wire Wire thickness 0,3 mm Twisted No Height 85 mm Connection size (machine) 6 mm n: PFERD TBU 6015/6 ST 0,30 cup brush unturned Ø 60 mm pin-Ø 6 mm steel wire-Ø 0.30 - 43211001 cn: BRUSCH APPLICATOR cn2: BRUSCH APPLICATOR cn_clear: BRUSCHAPPLICATOR d: Product description PFERD Cup brush crimped TBU dia. 60 mm shank dia. 6 mm steel wire dia. 0.30 Characteristics Generally suitable for cleaning, derusting and smoothing, as well as removal of corrosion and paint Particularly suitable for brushing on large, flat and easily accessible surfaces due to face-down use with the entire brush face applied to the workpiece Cup brush with plastic-covered brush body Steel wire is the most common filament material Brushes with steel wire as the filament material are especially well-suited to work on surfaces and deburring PFERD special wire has high tensile strength and bending fatigue strength This ensures that the wire wears down in the optimal way, as well as a long tool life, even in extreme brushing applications Steel wire withstands temperatures up to 300 °C Advantages: Highly flexible, enabling optimal adjustment to the workpiece contour. Long tool life through use of PFERD special wire. Creates fine surfaces. ds: dsc: kts: cup brush unturned Ø 60 mm pin-Ø 6 mm steel wire-Ø 0.30 kpn: TBU 6015/6 ST 0,30 kpn_dash: kpn_clear: TBU60156ST030 bkpn: PFERD TBU 6015/6 ST 0,30 bkpn_clear: PFERD TBU60156ST030 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Detail brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd detail brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43211001 sr_ns: PFERD43211001
r: 08077762 p: 13.92 pid: 35392 b: PFERD q: 0 st: lt: 8 ean: 4007220894552 sr: PFERD 43704015 sr_no_br: 43704015 sr_no_br_cl: 43704015 sr_cl: PFERD43704015 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Brush diameter 20 mm Connection type (machine) Shank Material (brush filament) Stainless steel Wire thickness 0,2 mm Twisted No Height 70 mm Connection size (machine) 6 mm n: PFERD POS PBU 2022/6 INOX 0,20 brush unturned Ø 20 mm pin-Ø 6 mm stainless steel wire-Ø 0.20 - 43704015 cn: BRUSCH APPLICATOR cn2: BRUSCH APPLICATOR cn_clear: BRUSCHAPPLICATOR d: Product description PFERD POS end brush crimped PBU dia. 20 mm shank dia. 6 mm stainless steel wire dia. 0.20 Characteristics Suitable for light brushing such as deburring, cleaning and derusting End brush with plastic-covered brush body In order to fulfil the particular requirements for working with stainless steel (INOX), PFERD uses wire quality 1,4310 (V2A) for all INOX brushes Practical experience from industry has shown that this offers very good corrosion resistance with an optimum tool life All PFERD brushes with INOX filaments are colour-coded in blue and are suitable for use on all stainless steels (INOX), such as V4A The wire quality 1,4310 tends to become ferromagnetic in the case of cold working; i E It can be attracted using magnets ;The reason for this is a change in the microstructure caused by deformation ( e.g. during the wire drawing process) This does not have any impact on the quality and corrosion resistance of the INOX filament The filament is still resistant to corrosion Stainless steel wire (INOX) withstands temperatures up to 450 °C Advantages: The brush is degreased and does not leave any oil residue on the workpiece. Optimal access to hard-to-reach areas such as drilled holes and cavities as the filament spreads out upon rotation. The plastic covering prevents the risk of corrosion. Very good corrosion resistance. Creates fine surfaces. ds: dsc: kts: brush unturned Ø 20 mm pin-Ø 6 mm stainless steel wire-Ø 0.20 kpn: POS PBU 2022/6 INOX 0,20 kpn_dash: kpn_clear: POSPBU20226INOX020 bkpn: PFERD POS PBU 2022/6 INOX 0,20 bkpn_clear: PFERD POSPBU20226INOX020 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Detail brush | Home / Our brands / Pferd / Pferd tools / Pferd machining tools / Pferd surface treatment / Pferd sanding, sharpening, polishing and deburring / Pferd detail brush | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Detail brush sr_no_br_cl_ns: 43704015 sr_ns: PFERD43704015
