r: 08051880 p: 27.107 pid: 132708 b: BOSCH q: 3 st: 1 lt: 1 ean: 4059952535081 sr: BOSCH 2608900418 sr_no_br: 2608900418 sr_no_br_cl: 2608900418 sr_cl: BOSCH2608900418 sr_dash: sold: 1002.959 p_range: KLIUM_PRODUCT_RANGE_196 type: standard act: 1 avo: 1 av: Length 455 mm For material Stone Number of teeth per inch 2 Product Range Bosch Expert n: BOSCH S 2243 HM Expert reciprocating saw blade Hollow Brick - 2608900418 cn: RECIPROCATING SAW BLADE cn2: RECIPROCATING SAW BLADE cn_clear: RECIPROCATINGSAWBLADE d: Product description EXPERT Reciprocating saw blade S2243HM Hollow Brick Carbide Technology for long-term cutting of hollow brick Exceptional durability thanks to Bosch Carbide Technology. Fits all reciprocating saws with S-shank. Advantages Carbide Technology for long-lasting hollow brick sawing - For builders and bricklayers, cutting hollow bricks on site allows for fast and productive work. However, most reciprocating saw blades do not last long in such abrasive mineral materials. With a special carbide saw blade like the EXPERT 'Hollow Brick', masons can cut hollow bricks to size easily, without their blades breaking down. For tasks that conventional bi-metal reciprocating saw blades cannot handle, the Bosch EXPERT 'Hollow Brick' reciprocating saw blade uses Bosch Carbide Technology and is specially designed for cutting hollow bricks. The wide body and thick material provide stability for professionals to make an accurate cut. In the process, the brazed carbide teeth are strong enough to cut bricks all day long. Thanks to the Bosch EXPERT 'Hollow Brick' reciprocating saw blade, the reciprocating saw is fast becoming a favourite tool among bricklayers. Cut bricks to size with Bosch Carbide Technology. Fits all reciprocating saws with S-shank. Long life when cutting in hollow bricksFor tasks that conventional bi-metal reciprocating saw blades cannot handle, the Bosch Expert 'Hollow Brick' reciprocating saw blade uses Bosch Carbide Technology and is specially designed for cutting hollow bricks. The wide body and thick material provide stability for professionals to make an accurate cut. In addition, the brazed carbide teeth are strong enough to cut bricks all day long. Fits all reciprocating saws with S-shank, also called reciprocating saws or demolition saws. ds: dsc: kts: Expert reciprocating saw blade Hollow Brick kpn: S 2243 HM kpn_dash: kpn_clear: S2243HM bkpn: BOSCH S 2243 HM bkpn_clear: BOSCH S2243HM c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Reciprocating saw blade | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch sawing and cutting / Bosch reciprocating saw blade | Home / Our brands / Bosch / Bosch Ranges / Bosch expert sr_no_br_cl_ns: 2608900418 sr_ns: BOSCH2608900418
r: 08051679 p: 34.545 pid: 136248 b: BOSCH q: 4 st: 1 lt: 1 ean: 4059952532332 sr: BOSCH 2608900160 sr_no_br: 2608900160 sr_no_br_cl: 2608900160 sr_cl: BOSCH2608900160 sr_dash: sold: 1001.805 p_range: KLIUM_PRODUCT_RANGE_196 type: standard act: 1 avo: 1 av: Diameter 6 mm Drill bit type Hammer drill bit Overall length 165 mm Shank type SDS-plus Material (drill bit) Carbide tip Number of cutting edges 4 ea Cutting length 100 mm Product Range Bosch Expert n: BOSCH 2608900160 Expert hammer drill SDS-Plus-7X, 10pcs 6x100x165mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description EXPERT Hammer drill bit SDS plus-7X 10pcs 6x100x165mm Lasts up to 3x longer than a Bosch SDS plus-3 drill bit Exceptionally durable drill head with Bosch Carbide Technology. Fits all SDS plus rotary hammers. Advantages Lasts up to 3x longer than a Bosch SDS plus-3 drill bit - Drilling through reinforced concrete is a tough job and it always takes its toll on your drills. Ordinary drills with two cutting edges get stuck in rebar and will eventually break. The carbide head of the EXPERT SDS plus-7X is an advanced design with 4 cutting edges made in one piece of the strongest metal: it does not jam and has no weakness. Thanks to Bosch Carbide Technology and the carbide tip, the EXPERT SDS plus-7X lasts much longer than ordinary hammer drills. It passes through rebar effectively. So there is no need to stop, re-centre or change drills when hitting steel. For construction professionals who regularly drill into concrete and reinforced concrete, for example for fixings and installations, the Bosch EXPERT SDS plus-7X hammer drill offers unparalleled performance, reliability and long life. The EXPERT accessory for SDS plus rotary hammers. Fits all SDS plus rotary hammers. Long service life when drilling in reinforced concreteThanks to Bosch Carbide Technology and the carbide tip, the Expert SDS plus-7X lasts much longer than ordinary hammer drills. It passes through reinforced concrete effectively. So there is no need to stop, re-centre or change drill bits when hitting steel. Fits all SDS plus hammer drills. ds: dsc: kts: Expert hammer drill SDS-Plus-7X, 10pcs 6x100x165mm kpn: 2608900160 kpn_dash: kpn_clear: 2608900160 bkpn: BOSCH 2608900160 bkpn_clear: BOSCH 2608900160 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit | Home / Our brands / Bosch / Bosch Ranges / Bosch expert sr_no_br_cl_ns: 2608900160 sr_ns: BOSCH2608900160
r: 08051994 p: 18.14 pid: 130902 b: BOSCH q: 11 st: 1 lt: 1 ean: 4059952537887 sr: BOSCH 2608900564 sr_no_br: 2608900564 sr_no_br_cl: 2608900564 sr_cl: BOSCH2608900564 sr_dash: sold: 997.7 p_range: KLIUM_PRODUCT_RANGE_196 type: standard act: 1 avo: 1 av: Product Range Bosch Expert n: BOSCH 2608900564 jigsaw blade T 341 HM Expert Fiber Plaster (3 pcs) cn: JIGSAW BLADE cn2: JIGSAW BLADE cn_clear: JIGSAWBLADE d: Product description EXPERT Jigsaw blade T341HM 3pcs Fiber Plaster Carbide Technology for long-life performance Exceptional durability thanks to Bosch Carbide Technology. Fits all jigsaws with a T-shank. Advantages Carbide Technology for long-life performance - Demanding materials require a strong jigsaw blade, but you also need it to cut well. Worn-out saw blades don't get the job done, so longevity and quality go hand in hand with the EXPERT 'Fiber Plaster'. The carbide teeth cut the toughest abrasive materials such as cement fibreboard, plasterboard and fibreglass-reinforced plastics. And because they keep working, they have maximum productivity. The quality and extreme durability of the Bosch EXPERT 'Fiber Plaster' jigsaw blade are achieved with Bosch Carbide Technology. Individual teeth ground from the hardest metal are welded onto the saw blade using advanced manufacturing techniques. The Bosch EXPERT 'Fiber Plaster' jigsaw blade is designed to cut repeatedly in the most abrasive materials. The best choice for professionals who have a tough job to do, such as installing plasterboard, and is available with two length options: the T141HM for maximum control and the longer T341HM for better reach. Fits all jigsaws with a T-shank. Long service life when cutting in abrasive building materialsThe quality and extreme durability of the Bosch Expert 'Fiber Plaster' jigsaw blade are achieved with Bosch Carbide Technology. Individual teeth ground from the hardest metal are welded onto the saw blade using advanced manufacturing techniques. Fits all jigsaws with a T-shank. ds: dsc: kts: jigsaw blade T 341 HM Expert Fiber Plaster (3 pcs) kpn: 2608900564 kpn_dash: kpn_clear: 2608900564 bkpn: BOSCH 2608900564 bkpn_clear: BOSCH 2608900564 c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Jigsaw blade | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch sawing and cutting / Bosch jigsaw blade | Home / Our brands / Bosch / Bosch Ranges / Bosch expert sr_no_br_cl_ns: 2608900564 sr_ns: BOSCH2608900564
r: 02225337 p: 45.289 pid: 127814 b: BOSCH q: 4 st: 1 lt: 1 ean: 3165140648233 sr: BOSCH 2608642498 sr_no_br: 2608642498 sr_no_br_cl: 2608642498 sr_cl: BOSCH2608642498 sr_dash: sold: 996.358 p_range: KLIUM_PRODUCT_RANGE_196 type: standard act: 1 avo: 1 av: Saw blade diameter 250 mm Bore size 30 mm Number of teeth 60 Kerf width 2,4 mm For material Wood Mounting (saw blade/cutter) Round Product Range Bosch Expert n: BOSCH 2608642498 circular saw blade Expert for Wood, 250 x 30 x 2.4 mm, 60T cn: CIRCULAR SAW BLADE cn2: CIRCULAR SAW BLADE cn_clear: CIRCULARSAWBLADE d: Product description Circular saw blade Expert for Wood, 250 x 30 x 2.4 mm, 60T Long lifetime with high cutting performance in wood Expert for Wood circular saw blades have a long lifetime with great cutting performance in wood Extra Hard MicroteQ teeth are manufactured in-house by Bosch from high-strength carbide grit for high durability Advantages Long cutting life - MicroteQ teeth (manufactured in-house) from high-density carbide and the robust tooth shape are ideal for universal use Compatible with cut-off saws and cross-cut saws Depending on the number of teeth, different results can be achieved with all Expert for Wood circular saw blades, which feature an Alternate Top Bevel (ATB) tooth geometry: with a large number of teeth, the blade gives clean cuts, while a low number of teeth delivers solid and efficient cuts. Arbor works with or without reducing rings to fit different sizes. ds: dsc: Scope of delivery Paper / cardboard / corrugated board - packaging, sleeve, with Euro die-cut kts: circular saw blade Expert for Wood, 250 x 30 x 2.4 mm, 60T kpn: 2608642498 kpn_dash: kpn_clear: 2608642498 bkpn: BOSCH 2608642498 bkpn_clear: BOSCH 2608642498 c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Circular saw blade | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch sawing and cutting / Bosch circular saw blade | Home / Our brands / Bosch / Bosch Ranges / Bosch expert sr_no_br_cl_ns: 2608642498 sr_ns: BOSCH2608642498
r: 02784903 p: 52.231 pid: 134340 b: BOSCH q: 0 st: lt: 6 ean: 3165140880930 sr: BOSCH 2608644343 sr_no_br: 2608644343 sr_no_br_cl: 2608644343 sr_cl: BOSCH2608644343 sr_dash: sold: 992.389 p_range: KLIUM_PRODUCT_RANGE_196 type: standard act: 1 avo: 1 av: Saw blade diameter 254 mm Bore size 30 mm Number of teeth 80 Kerf width 2,6 mm For material Wood Mounting (saw blade/cutter) Round Product Range Bosch Expert n: BOSCH 2608644343 circular saw blade Expert for Wood, 254 x 30 x 2.6/1.8 mm, 80T cn: CIRCULAR SAW BLADE cn2: CIRCULAR SAW BLADE cn_clear: CIRCULARSAWBLADE d: Product description Circular saw blade Expert for Wood, 254 x 30 x 2.6/1.8 mm, 80T Long lifetime with high cutting performance in wood Expert for Wood circular saw blades have a long lifetime with great cutting performance in wood Extra Hard MicroteQ teeth are manufactured in-house by Bosch from high-strength carbide grit for high durability Advantages Long cutting life - MicroteQ teeth (manufactured in-house) from high-density carbide and the robust tooth shape are ideal for universal use Compatible with table saws Depending on the number of teeth, different results can be achieved with all Expert for Wood circular saw blades, which feature an ATB (Alternate Top Bevel) tooth geometry: with a large number of teeth, the blade gives clean cuts, while a low number of teeth delivers solid and efficient cuts. Arbor works with or without reducing rings to fit different sizes. ds: dsc: kts: circular saw blade Expert for Wood, 254 x 30 x 2.6/1.8 mm, 80T kpn: 2608644343 kpn_dash: kpn_clear: 2608644343 bkpn: BOSCH 2608644343 bkpn_clear: BOSCH 2608644343 c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Circular saw blade | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch sawing and cutting / Bosch circular saw blade | Home / Our brands / Bosch / Bosch Ranges / Bosch expert sr_no_br_cl_ns: 2608644343 sr_ns: BOSCH2608644343
r: 02224200 p: 26.776 pid: 130620 b: BOSCH q: 2 st: 1 lt: 1 ean: 3165140194808 sr: BOSCH 2608640701 sr_no_br: 2608640701 sr_no_br_cl: 2608640701 sr_cl: BOSCH2608640701 sr_dash: sold: 990.712 p_range: none type: standard act: 1 avo: 1 av: Saw blade diameter 315 mm Bore size 30 mm Number of teeth 20 Kerf width 3,2 mm For material Wood with nails Mounting (saw blade/cutter) Round n: BOSCH 2608640701 circular saw blade Construct Wood, 315 x 30 x 3.2 mm, 20T cn: CIRCULAR SAW BLADE cn2: CIRCULAR SAW BLADE cn_clear: CIRCULARSAWBLADE d: Product description Circular saw blade Construct Wood, 315 x 30 x 3.2 mm, 20T Durable when cutting construction wood with nails and concrete residues Precision ground high-quality carbide teeth make the blade robust for tough applications Expansion slots reduce vibration during use, which reduces noise and reduces heat generation. Advantages Long cutting life - The Construct Wood circular saw blade has a long life when cutting construction timber with nails and concrete remnants. The precision ground high-quality carbide teeth make the blade robust for tough applications. In addition, its expansion slots reduce vibration during use, which reduces noise and reduces heat generation. The base blade is made of dimensionally stable SK5-hardened steel (>40 HRC) which ensures accuracy. Use this saw blade for construction timber with nails and concrete remnants. Compatible with table saws. Construct Wood circular saw blade has a long life when cutting construction wood with nails and concrete remnants Shaft works with or without reducing rings to fit different sizes. ds: dsc: Scope of delivery Paper / cardboard / corrugated board - packaging, sleeve, with Euro die-cut kts: circular saw blade Construct Wood, 315 x 30 x 3.2 mm, 20T kpn: 2608640701 kpn_dash: kpn_clear: 2608640701 bkpn: BOSCH 2608640701 bkpn_clear: BOSCH 2608640701 c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Circular saw blade | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch sawing and cutting / Bosch circular saw blade sr_no_br_cl_ns: 2608640701 sr_ns: BOSCH2608640701
r: 02224012 p: 42.809 pid: 131356 b: BOSCH q: 0 st: lt: 6 ean: 3165140076029 sr: BOSCH 2608632123 sr_no_br: 2608632123 sr_no_br_cl: 2608632123 sr_cl: BOSCH2608632123 sr_dash: sold: 984.607 p_range: none type: standard act: 1 avo: 1 av: n: BOSCH 2608632123 HM TF 350 NHM reciprocating saw blade Special AeratedConcrete (2 pcs) cn: ALLIGATOR SAW BLADE cn2: ALLIGATOR SAW BLADE cn_clear: ALLIGATORSAWBLADE d: Product description 2-piece reciprocating saw blade set HM TF 350 NHM Special AeratedConcrete For efficient and simultaneous sawing with two blades 2-piece TF 300 NHM saw blade set ensures efficient cutting with two blades simultaneously. Intended for cutting in materials up to 360 mm thick. Advantages Two blades that cut simultaneously. - The 2-piece TF 300 NHM saw blade set provides efficient cutting with two blades simultaneously. The blades are designed for cutting in materials up to 360 mm thick. In addition, the tungsten carbide material makes the blades effective when cutting in various materials, such as porous concrete. They fit all Bosch universal tandem saws. Fits all universal tandem saws with TF shank. ds: dsc: Scope of delivery Paper / cardboard / corrugated board - packaging, case, with Euro die-cut kts: HM TF 350 NHM reciprocating saw blade Special AeratedConcrete (2 pcs) kpn: 2608632123 kpn_dash: kpn_clear: 2608632123 bkpn: BOSCH 2608632123 bkpn_clear: BOSCH 2608632123 c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Alligator saw blade | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch sawing and cutting / Bosch alligator saw blade sr_no_br_cl_ns: 2608632123 sr_ns: BOSCH2608632123
r: 02224330 p: 162.644 pid: 130683 b: BOSCH q: 0 st: lt: 8 ean: 3165140206174 sr: BOSCH 2608656034 sr_no_br: 2608656034 sr_no_br_cl: 2608656034 sr_cl: BOSCH2608656034 sr_dash: sold: 975.864 p_range: none type: standard act: 1 avo: 1 av: Length 225 mm For material Wood; Metal Number of teeth per inch 10 Quantiy per pack 100 Thickness 0,9 mm n: BOSCH S 1122 HF reciprocating saw blade Flexible for Wood and Metal (100 pcs) - 2608656034 cn: RECIPROCATING SAW BLADE cn2: RECIPROCATING SAW BLADE cn_clear: RECIPROCATINGSAWBLADE d: Product description Reciprocating saw blade S 1122 HF Flexible for Wood and Metal 100x Flat cuts for pallet repairs S 1122 HF Flexible for Wood and Metal reciprocating saw blade delivers flush cuts in wood and metal Standard material thickness (0.9 mm) with standard length (225 mm) enables flush cutting Advantages Flat cuts - The S 1122 HF Flexible for Wood and Metal reciprocating saw blade delivers flat cuts in wood and metal. The standard material thickness (0.9 mm) with a standard length (225 mm) makes the blade suitable for flush cutting. In addition, the bi-metal blade is combined with a high-carbon steel (HCS) saw blade fitted with high-speed steel (HSS) teeth, making this reciprocating saw blade optimal for pallet repairs. With a medium tooth spacing (2.5 mm), the blade cuts all soft nails and clips as usual in pallet construction. The blade has a standard length of 225 mm, giving a cutting capacity of up to 175 mm. For use with reciprocating saw with 1/2-inch universal shank systems. Fits all reciprocating saws with S-shank. ds: dsc: Scope of delivery Paper / cardboard / corrugated board - packaging, box, without Eurostamping kts: reciprocating saw blade Flexible for Wood and Metal (100 pcs) kpn: S 1122 HF kpn_dash: kpn_clear: S1122HF bkpn: BOSCH S 1122 HF bkpn_clear: BOSCH S1122HF c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Reciprocating saw blade | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch sawing and cutting / Bosch reciprocating saw blade sr_no_br_cl_ns: 2608656034 sr_ns: BOSCH2608656034
r: 08051717 p: 19.793 pid: 136805 b: BOSCH q: 4 st: 1 lt: 1 ean: 4059952532721 sr: BOSCH 2608900198 sr_no_br: 2608900198 sr_no_br_cl: 2608900198 sr_cl: BOSCH2608900198 sr_dash: sold: 969.857 p_range: KLIUM_PRODUCT_RANGE_196 type: standard act: 1 avo: 1 av: Smallest diameter 6 mm Largest diameter 10 mm Drill set type Hammer drill bit set Quantity per set 5 Product Range Bosch Expert n: BOSCH 2608900198 Expert SDS plus-7X hammer drill bit set 6/6/8/10 mm 5-piece cn: DRILL BIT SET cn2: DRILL BIT SET cn_clear: DRILLBITSET d: Product description EXPERT 5-piece set SDS plus-7X, 6; 6; 8; 8; 10 mm in Robustline cassette Lasts up to 3x longer than a Bosch SDS plus-3 drill bit Exceptionally durable drill bit head with Bosch Carbide Technology. Fits all SDS plus rotary hammers. Advantages Lasts up to 3x longer than a Bosch SDS plus-3 drill bit - Drilling through reinforced concrete is a tough job and it always takes its toll on your drills. Ordinary drills with two cutting edges get stuck in rebar and will eventually break. The carbide head of the EXPERT SDS plus-7X is an advanced design with 4 cutting edges made in one piece of the strongest metal: it does not jam and has no weakness. Thanks to Bosch Carbide Technology and the carbide tip, the EXPERT SDS plus-7X lasts much longer than ordinary hammer drills. It passes through rebar effectively. So there is no need to stop, re-centre or change drills when hitting steel. For construction professionals who regularly drill into concrete and reinforced concrete, for example for fixings and installations, the Bosch EXPERT SDS plus-7X hammer drill offers unparalleled performance, reliability and long life. The EXPERT accessory for SDS plus rotary hammers. Fits all SDS plus rotary hammers. Long service life when drilling in reinforced concreteThanks to Bosch Carbide Technology and the carbide tip, the Expert SDS plus-7X lasts much longer than ordinary hammer drills. It passes through reinforced concrete effectively. So there is no need to stop, re-centre or change drill bits when hitting steel. Fits all SDS plus hammer drills. ds: dsc: kts: Expert SDS plus-7X hammer drill bit set 6/6/8/10 mm 5-piece kpn: 2608900198 kpn_dash: kpn_clear: 2608900198 bkpn: BOSCH 2608900198 bkpn_clear: BOSCH 2608900198 c_path: Home / Tools / Machining tools / Sets and kits / Drilling and punching / Drill bit set | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch sets and kits / Bosch drilling and punching / Bosch drill bit set | Home / Our brands / Bosch / Bosch Ranges / Bosch expert sr_no_br_cl_ns: 2608900198 sr_ns: BOSCH2608900198
r: 02220316 p: 159.338 pid: 129189 b: BOSCH q: 0 st: lt: 8 ean: 3165140021975 sr: BOSCH 1618596457 sr_no_br: 1618596457 sr_no_br_cl: 1618596457 sr_cl: BOSCH1618596457 sr_dash: sold: 956.028 p_range: none type: standard act: 1 avo: 1 av: Diameter 55 mm Drill bit type Hammer drill bit - Breakthrough drill bit Overall length 600 mm Shank type SDS-max Material (drill bit) Carbide tip Number of cutting edges 3 ea Cutting length 450 mm n: BOSCH 1618596457 concrete drill bit SDS-Max-9, breakthrough 55 x 450 x 600 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Through drill bit SDS-Max-9, Break Through 55 x 450 x 600 mm Standard drill bit for drilling large and deep holes in concrete Drill bit SDS max-9 Break Through is used as standard when drilling large and deep holes in concrete Vacuum brazed and carbide tip with 3 cutters to break through large pieces of material Advantages Deep holes in concrete - The SDS max-9 Break Through drill bit is used as standard when drilling large and deep holes in concrete. The fine-grained, carbide tip with 3 cutters is vacuum brazed and hardened for fast results and good removal of large pieces of grit. The drill bit's long, tapered shank allows piercing, while the U-shaped design with 2 spirals removes drilling dust well. The drill bit is suitable for piercing with a diameter of 45 to 80 mm in concrete, masonry and limestone for e.g. pulling cables and pipes outside. The drill bit is intended for use on rotary hammers. Note: When drilling through, always use a drill hammer with sufficient power to prevent overloading. Read the operating instructions first. Fits all SDS max rotary hammers. ds: dsc: kts: concrete drill bit SDS-Max-9, breakthrough 55 x 450 x 600 mm kpn: 1618596457 kpn_dash: kpn_clear: 1618596457 bkpn: BOSCH 1618596457 bkpn_clear: BOSCH 1618596457 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 1618596457 sr_ns: BOSCH1618596457
r: 02783965 p: 27.107 pid: 128358 b: BOSCH q: 1 st: 1 lt: 1 ean: 3165140795883 sr: BOSCH 2608644022 sr_no_br: 2608644022 sr_no_br_cl: 2608644022 sr_cl: BOSCH2608644022 sr_dash: sold: 948.745 p_range: KLIUM_PRODUCT_RANGE_196 type: standard act: 1 avo: 1 av: Saw blade diameter 165 mm Bore size 20 mm Number of teeth 24 Kerf width 2,6 mm For material Wood Mounting (saw blade/cutter) Round Product Range Bosch Expert n: BOSCH 2608644022 circular saw blade Expert for Wood, 165 x 20 x 2.6 mm, 24T cn: CIRCULAR SAW BLADE cn2: CIRCULAR SAW BLADE cn_clear: CIRCULARSAWBLADE d: Product description Circular saw blade Expert for Wood, 165 x 20 x 2.6 mm, 24T Long lifetime with high cutting performance in wood Expert for Wood circular saw blades have a long lifetime with great cutting performance in wood Extra Hard MicroteQ teeth are manufactured in-house by Bosch from high-strength carbide grit for high durability Advantages Long cutting life - MicroteQ teeth (manufactured in-house) from high-density carbide and the robust tooth shape are ideal for universal use Compatible with hacksaws and hand saws Depending on the number of teeth, different results can be achieved with all Expert for Wood circular saw blades, which feature an ATB (Alternate Top Bevel) tooth geometry: with a large number of teeth, the blade gives clean cuts, while a low number of teeth delivers solid and efficient cuts. Arbor works with or without reducing rings to fit different sizes. ds: dsc: Scope of delivery Paper / cardboard / corrugated board - packaging, sleeve, with Euro die-cut kts: circular saw blade Expert for Wood, 165 x 20 x 2.6 mm, 24T kpn: 2608644022 kpn_dash: kpn_clear: 2608644022 bkpn: BOSCH 2608644022 bkpn_clear: BOSCH 2608644022 c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Circular saw blade | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch sawing and cutting / Bosch circular saw blade | Home / Our brands / Bosch / Bosch Ranges / Bosch expert sr_no_br_cl_ns: 2608644022 sr_ns: BOSCH2608644022
r: 08051660 p: 85.289 pid: 136575 b: BOSCH q: 0 st: lt: 6 ean: 4059952532141 sr: BOSCH 2608900141 sr_no_br: 2608900141 sr_no_br_cl: 2608900141 sr_cl: BOSCH2608900141 sr_dash: sold: 938.179 p_range: KLIUM_PRODUCT_RANGE_196 type: standard act: 1 avo: 1 av: Diameter 18 mm Drill bit type Hammer drill bit Overall length 1000 mm Shank type SDS-plus Material (drill bit) Carbide tip Number of cutting edges 4 ea Cutting length 950 mm Product Range Bosch Expert n: BOSCH 2608900141 Expert hammer drill SDS-Plus-7X, 18x950x1000mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description EXPERT Hammer drill bit SDS plus-7X 18x950x1000mm Lasts up to 3x longer than a Bosch SDS plus-3 drill bit Exceptionally durable drill head with Bosch Carbide Technology. Fits all SDS plus rotary hammers. Advantages Lasts up to 3x longer than a Bosch SDS plus-3 drill bit - Drilling through reinforced concrete is a tough job and it always takes its toll on your drills. Ordinary drills with two cutting edges get stuck in rebar and will eventually break. The carbide head of the EXPERT SDS plus-7X is an advanced design with 4 cutting edges made in one piece of the strongest metal: it does not jam and has no weakness. Thanks to Bosch Carbide Technology and the carbide tip, the EXPERT SDS plus-7X lasts much longer than ordinary hammer drills. It passes through rebar effectively. So there is no need to stop, re-centre or change drills when hitting steel. For construction professionals who regularly drill into concrete and reinforced concrete, for example for fixings and installations, the Bosch EXPERT SDS plus-7X hammer drill offers unparalleled performance, reliability and long life. The EXPERT accessory for SDS plus rotary hammers. Fits all SDS plus rotary hammers. Long service life when drilling in reinforced concreteThanks to Bosch Carbide Technology and the carbide tip, the Expert SDS plus-7X lasts much longer than ordinary hammer drills. It passes through reinforced concrete effectively. So there is no need to stop, re-centre or change drill bits when hitting steel. Fits all SDS plus hammer drills. ds: dsc: kts: Expert hammer drill SDS-Plus-7X, 18x950x1000mm kpn: 2608900141 kpn_dash: kpn_clear: 2608900141 bkpn: BOSCH 2608900141 bkpn_clear: BOSCH 2608900141 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit | Home / Our brands / Bosch / Bosch Ranges / Bosch expert sr_no_br_cl_ns: 2608900141 sr_ns: BOSCH2608900141
r: 08051708 p: 187.107 pid: 136649 b: BOSCH q: 0 st: lt: 8 ean: 4059952532622 sr: BOSCH 2608900189 sr_no_br: 2608900189 sr_no_br_cl: 2608900189 sr_cl: BOSCH2608900189 sr_dash: sold: 935.535 p_range: KLIUM_PRODUCT_RANGE_196 type: standard act: 1 avo: 1 av: Diameter 12 mm Drill bit type Hammer drill bit Overall length 215 mm Shank type SDS-plus Material (drill bit) Carbide tip Number of cutting edges 4 ea Cutting length 150 mm Product Range Bosch Expert n: BOSCH 2608900189 Expert hammer drill SDS-Plus-7X, 30pcs 12x150x215mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description EXPERT Hammer drill bit SDS plus-7X 30pcs 12x150x215mm Lasts up to 3x longer than a Bosch SDS plus-3 drill bit Exceptionally durable drill head with Bosch Carbide Technology. Fits all SDS plus rotary hammers. Advantages Lasts up to 3x longer than a Bosch SDS plus-3 drill bit - Drilling through reinforced concrete is a tough job and it always takes its toll on your drills. Ordinary drills with two cutting edges get stuck in rebar and will eventually break. The carbide head of the EXPERT SDS plus-7X is an advanced design with 4 cutting edges made in one piece of the strongest metal: it does not jam and has no weakness. Thanks to Bosch Carbide Technology and the carbide tip, the EXPERT SDS plus-7X lasts much longer than ordinary hammer drills. It passes through rebar effectively. So there is no need to stop, re-centre or change drills when hitting steel. For construction professionals who regularly drill into concrete and reinforced concrete, for example for fixings and installations, the Bosch EXPERT SDS plus-7X hammer drill offers unparalleled performance, reliability and long life. The EXPERT accessory for SDS plus rotary hammers. Fits all SDS plus rotary hammers. Long service life when drilling in reinforced concreteThanks to Bosch Carbide Technology and the carbide tip, the Expert SDS plus-7X lasts much longer than ordinary hammer drills. It passes through reinforced concrete effectively. So there is no need to stop, re-centre or change drill bits when hitting steel. Fits all SDS plus hammer drills. ds: dsc: kts: Expert hammer drill SDS-Plus-7X, 30pcs 12x150x215mm kpn: 2608900189 kpn_dash: kpn_clear: 2608900189 bkpn: BOSCH 2608900189 bkpn_clear: BOSCH 2608900189 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit | Home / Our brands / Bosch / Bosch Ranges / Bosch expert sr_no_br_cl_ns: 2608900189 sr_ns: BOSCH2608900189
r: 02221853 p: 9.256 pid: 133195 b: BOSCH q: 5 st: 1 lt: 1 ean: 3165140323666 sr: BOSCH 2608595345 sr_no_br: 2608595345 sr_no_br_cl: 2608595345 sr_cl: BOSCH2608595345 sr_dash: sold: 934.856 p_range: none type: standard act: 1 avo: 1 av: Diameter 3 mm Outer diameter 16 mm n: BOSCH 2608595345 wood spiral drill bit with countersink 3 mm cn: INTERCHANGEABLE COUNTERSINK cn2: INTERCHANGEABLE COUNTERSINK cn_clear: INTERCHANGEABLECOUNTERSINK d: Product description Wood spiral drill bit with countersink 3 x 30 x 60 mm Efficient drilling and countersinking in wood in one step. Drill bit with countersink centre point for efficient drilling, countersinking and deburring in wood - in one step This component on a drill bit with centring tip allows all three of these applications to be carried out in one go Benefits Drilling and countersinking in wood in one - The drill bit with centring tip for countersinking for efficient drilling, countersinking and deburring in wood - in one go. By placing this part on a drill bit with centring tip, all three of these applications can be carried out in one go. The countersink drill bit is suitable for hard and soft wood, laminated and non-laminated chipboard and plywood. Intended for drill stands and drill/screw machines. Made of tool steel, this multipurpose drill bit has a countersink angle of 90 degrees, 5 cutting edges and can also be used as a depth stop. The countersink drill bit comes with a hex spanner, a drill bit with centring point and a push-on countersink. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: wood spiral drill bit with countersink 3 mm kpn: 2608595345 kpn_dash: kpn_clear: 2608595345 bkpn: BOSCH 2608595345 bkpn_clear: BOSCH 2608595345 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Interchangeable countersink | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch interchangeable countersink sr_no_br_cl_ns: 2608595345 sr_ns: BOSCH2608595345
r: 08052111 p: 32.066 pid: 130360 b: BOSCH q: 2 st: 1 lt: 1 ean: 4059952540481 sr: BOSCH 2608900710 sr_no_br: 2608900710 sr_no_br_cl: 2608900710 sr_cl: BOSCH2608900710 sr_dash: sold: 929.914 p_range: KLIUM_PRODUCT_RANGE_196 type: standard act: 1 avo: 1 av: (Disc) diameter 225 mm (Disc) attachment Hook and loop Bore size Perforated No For material Wood; Paint Series M480 Best for Wood and Paint Grit size 150 Product Range Bosch Expert n: BOSCH 2608900710 Expert M480 sanding net Best for Wood and Paint, diameter 225 mm, grit 150 (25 pcs) cn: ABRASIVE DISC cn2: ABRASIVE DISC cn_clear: ABRASIVEDISC d: Product description EXPERT M480 Sanding net Best for Wood and Paint, diameter 225 mm, grit 150, 25x Up to 4x better dust extraction than the C420 abrasive from Bosch Highly efficient dust extraction with Bosch Particle Control. Just put it on with the hook-loop attachment. Advantages Up to 4x better dust extraction than Bosch's C420 sandpaper - Dust is the big drawback when sanding. It clogs up your sandpaper and makes it ineffective. It covers the whole room and everything in your home. That's why we developed Bosch Particle Control technology that takes dust reduction to the next level. Bosch Particle Control ensures that all dust particles are sucked into your hoover or filter. The Bosch EXPERT M480 sanding net is central to this system: particles move right through the open net instead of clogging the surface or polluting the air. This also makes it highly efficient and extremely durable. Less dust while sanding is not easy, but we have found a solution. This Bosch EXPERT M480 sanding net uses our Particle Control technology to keep dust levels to a minimum. Just put it on with the hook-loop attachment. Dust-free sanding of wood, paint and drywallBosch Particle Control ensures that all dust particles are sucked into your hoover or filter. The Bosch Expert M480 sanding net is central to this system: Particles move straight through its open net instead of clogging the surface or polluting the air. This also makes it highly efficient and extremely durable. Just put it on with the hook-loop attachment. ds: dsc: kts: Expert M480 sanding net Best for Wood and Paint, diameter 225 mm, grit 150 (25 pcs) kpn: 2608900710 kpn_dash: kpn_clear: 2608900710 bkpn: BOSCH 2608900710 bkpn_clear: BOSCH 2608900710 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Abrasive disc | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch surface treatment / Bosch sanding, sharpening, polishing and deburring / Bosch abrasive disc | Home / Our brands / Bosch / Bosch Ranges / Bosch expert sr_no_br_cl_ns: 2608900710 sr_ns: BOSCH2608900710
r: 08119833 p: 103.14 pid: 161123 b: BOSCH q: 0 st: lt: 7 ean: 6949509240743 sr: BOSCH 2608594430 sr_no_br: 2608594430 sr_no_br_cl: 2608594430 sr_cl: BOSCH2608594430 sr_dash: sold: 928.26 p_range: none type: standard act: 1 avo: 1 av: Smallest diameter 25 mm Largest diameter 66 mm Quantity per set 11 n: BOSCH 2608594430 PRO Multi Material PC Plus hole saw set 25-86mm 11-piece cn: HOLE SAW SET cn2: HOLE SAW SET cn_clear: HOLESAWSET d: Product description Lasts up to 2x longer than a standard HSS M3 hole saw Long life when drilling holes in various materials Steel with 8% cobalt for durability and great performance ds: dsc: Scope of delivery 8 hole saws: 25; 32; 40; 54; 60; 68; 76; 86 mm 1 x PC Plus adapter Hex 11 mm 2 x pilot drills HSS-G 85 mm kts: PRO Multi Material PC Plus hole saw set 25-86mm 11-piece kpn: 2608594430 kpn_dash: kpn_clear: 2608594430 bkpn: BOSCH 2608594430 bkpn_clear: BOSCH 2608594430 c_path: Home / Tools / Machining tools / Sets and kits / Sawing and cutting / Hole saw set | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch sets and kits / Bosch sawing and cutting / Bosch hole saw set sr_no_br_cl_ns: 2608594430 sr_ns: BOSCH2608594430
r: 02224077 p: 10.082 pid: 129929 b: BOSCH q: 9 st: 1 lt: 1 ean: 3165140393416 sr: BOSCH 2608636431 sr_no_br: 2608636431 sr_no_br_cl: 2608636431 sr_cl: BOSCH2608636431 sr_dash: sold: 907.38 p_range: none type: standard act: 1 avo: 1 av: Length 83 mm Quantity per blister 5 For material Laminate n: BOSCH 2608636431 jigsaw blade T 101 BIF Special for Laminate (5 pack) cn: JIGSAW BLADE cn2: JIGSAW BLADE cn_clear: JIGSAWBLADE d: Product description Jigsaw blade T101 BIF Special for Laminate 5x Smooth cuts in hardwood and abrasive woodworking materials T 101 BIF Special for Laminate jigsaw blade provides smooth, straight cuts in wood Precision-ground teeth with tapered body ensure smooth results Advantages Smooth cuts in hardwood - The T 101 BIF Special for Laminate jigsaw blade offers smooth, straight cuts in wood. Precision ground teeth with tapered body ensure smooth results The fully hardened HSS (high-speed steel) BIM (bi-metal) teeth are attached to a highly elastic HCS (high carbon steel) body that makes the blade suitable for cutting through hard materials, such as laminate flooring. In addition, a pointed type of serration reduces cracks in the material. Equipped with fine tooth spacing (1.7 mm), the blade cuts through various solid wood materials with a thickness of 2 - 30 mm. For use with jigsaws with a T-shank click system. Fits all jigsaws with a T-shank. ds: dsc: Scope of delivery Paper / cardboard / corrugated board - packaging, folding carton, with Euro die-cutting kts: jigsaw blade T 101 BIF Special for Laminate (5 pack) kpn: 2608636431 kpn_dash: kpn_clear: 2608636431 bkpn: BOSCH 2608636431 bkpn_clear: BOSCH 2608636431 c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Jigsaw blade | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch sawing and cutting / Bosch jigsaw blade sr_no_br_cl_ns: 2608636431 sr_ns: BOSCH2608636431
r: 08051632 p: 13.884 pid: 136725 b: BOSCH q: 0 st: lt: 8 ean: 4059952531861 sr: BOSCH 2608900113 sr_no_br: 2608900113 sr_no_br_cl: 2608900113 sr_cl: BOSCH2608900113 sr_dash: sold: 902.46 p_range: KLIUM_PRODUCT_RANGE_196 type: standard act: 1 avo: 1 av: Diameter 12 mm Drill bit type Hammer drill bit Overall length 465 mm Shank type SDS-plus Material (drill bit) Carbide tip Number of cutting edges 4 ea Cutting length 400 mm Product Range Bosch Expert n: BOSCH 2608900113 Expert hammer drill SDS-Plus-7X, 12x400x465mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description EXPERT Hammer drill bit SDS plus-7X 12x400x465mm Lasts up to 3x longer than a Bosch SDS plus-3 drill bit Exceptionally durable drill head with Bosch Carbide Technology. Fits all SDS plus rotary hammers. Benefits Lasts up to 3x longer than a Bosch SDS plus-3 drill bit - Drilling through reinforced concrete is a tough job and it always takes its toll on your drills. Ordinary drills with two cutting edges get stuck in rebar and will eventually break. The carbide head of the EXPERT SDS plus-7X is an advanced design with 4 cutting edges made in one piece of the strongest metal: it does not jam and has no weakness. Thanks to Bosch Carbide Technology and the carbide tip, the EXPERT SDS plus-7X lasts much longer than ordinary hammer drills. It passes through rebar effectively. So there is no need to stop, re-centre or change drills when hitting steel. For construction professionals who regularly drill into concrete and reinforced concrete, for example for fixings and installations, the Bosch EXPERT SDS plus-7X hammer drill offers unparalleled performance, reliability and long life. The EXPERT accessory for SDS plus rotary hammers. Fits all SDS plus rotary hammers. Long service life when drilling in reinforced concreteThanks to Bosch Carbide Technology and the carbide tip, the Expert SDS plus-7X lasts much longer than ordinary hammer drills. It passes through reinforced concrete effectively. So there is no need to stop, re-centre or change drill bits when hitting steel. Fits all SDS plus hammer drills. ds: dsc: kts: Expert hammer drill SDS-Plus-7X, 12x400x465mm kpn: 2608900113 kpn_dash: kpn_clear: 2608900113 bkpn: BOSCH 2608900113 bkpn_clear: BOSCH 2608900113 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit | Home / Our brands / Bosch / Bosch Ranges / Bosch expert sr_no_br_cl_ns: 2608900113 sr_ns: BOSCH2608900113
r: 01049268 p: 13.884 pid: 130363 b: BOSCH q: 5 st: 1 lt: 1 ean: 3165140328012 sr: BOSCH 2608690091 sr_no_br: 2608690091 sr_no_br_cl: 2608690091 sr_cl: BOSCH2608690091 sr_dash: sold: 902.46 p_range: none type: standard act: 1 avo: 1 av: Length 260 mm Chisel type Tile chisel Width 40 mm Shank type SDS-plus n: BOSCH 2608690091 tile chisel SDS-Plus 260 x 40 mm cn: CHISEL cn2: CHISEL cn_clear: CHISEL d: Product description Tile chisel SDS-Plus 260 x 40 mm Smooth and quick removal of wall and floor tiles SDS plus tile chisel offers smooth and fast removal of wall and floor tiles Self-sharpening spade maintains uniform thickness throughout its life for consistently high removal rates Advantages Smooth, fast removal of tiles - The SDS plus tile chisel offers smooth and fast removal of wall and floor tiles. The self-sharpening, flat design and curved cutting edge provide excellent positioning for work in small joints and easy access to the area under tiles for efficient removal without breakage. The chisel is compatible with an SDS plus chisel attachment or can be used directly with SDS plus hammers with a rotation stop. SDS plus tile chisel has a curved cutting edge, is self-sharpening and offers long life with 30% higher material removal than standard chisels. Fits all SDS plus rotary hammers. ds: dsc: Scope of delivery Plastic packaging, hanger, with Euro punching kts: tile chisel SDS-Plus 260 x 40 mm kpn: 2608690091 kpn_dash: kpn_clear: 2608690091 bkpn: BOSCH 2608690091 bkpn_clear: BOSCH 2608690091 c_path: Home / Tools / Machining tools / Surface treatment / Planing and chiseling / Chisel | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch surface treatment / Bosch planing and chiseling / Bosch chisel sr_no_br_cl_ns: 2608690091 sr_ns: BOSCH2608690091
