r: 02221780 p: 145.413 pid: 134467 b: BOSCH q: 0 st: lt: 8 ean: 3165140565585 sr: BOSCH 2608586774 sr_no_br: 2608586774 sr_no_br_cl: 2608586774 sr_cl: BOSCH2608586774 sr_dash: sold: 1454.13 p_range: none type: standard act: 1 avo: 1 av: Diameter 22 mm Drill bit type Hammer drill bit Overall length 1320 mm Shank size 18 mm Shank type SDS-max Material (drill bit) Carbide tip Number of cutting edges 4 ea Cutting length 1200 mm n: BOSCH 2608586774 hammer drill SDS-Max-7, 22 x 1200 x 1320 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Hammer drill bit SDS-Max-7, 22 x 1200 x 1320 mm Highest drilling speeds Drill bit SDS max-7 is ideally suited to high-speed drilling Solid carbide S cutter and curved side cutters allow drilling at very high speeds Advantages Highest drilling speeds - The SDS max-7 drill bit is ideally suited for drilling at high speeds. The solid carbide S-mill and curved side cutters enable drilling at very high speeds. The version with spirals for virtually vibration-free drilling ensures the best power transfer and enables faster drilling. This drill bit is suitable for drilling in concrete and reinforced concrete, limestone and masonry. This drill fits rotary hammers with an SDS max holder. The wear indicator shows whether the diameter of the hole is within tolerance, which is necessary to accurately set the metal anchor. The quality mark of the PGM Masonry Drill Bit Association Board on this drill bit guarantees that it is within close tolerances, drills very accurately and does not slip while drilling fixing holes. Fits all SDS max rotary hammers. ds: dsc: kts: hammer drill SDS-Max-7, 22 x 1200 x 1320 mm kpn: 2608586774 kpn_dash: kpn_clear: 2608586774 bkpn: BOSCH 2608586774 bkpn_clear: BOSCH 2608586774 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608586774 sr_ns: BOSCH2608586774
r: 08051879 p: 22.148 pid: 155359 b: BOSCH q: 13 st: 1 lt: 1 ean: 4059952535074 sr: BOSCH 2608900417 sr_no_br: 2608900417 sr_no_br_cl: 2608900417 sr_cl: BOSCH2608900417 sr_dash: sold: 1439.62 p_range: KLIUM_PRODUCT_RANGE_196 type: standard act: 1 avo: 1 av: Length 300 mm For material Stone Number of teeth per inch 2 Product Range Bosch Expert n: BOSCH S 1243 HM Expert reciprocating saw blade Hollow Brick - 2608900417 cn: RECIPROCATING SAW BLADE cn2: RECIPROCATING SAW BLADE cn_clear: RECIPROCATINGSAWBLADE d: Product description EXPERT Reciprocating saw blade S1243HM Hollow Brick Carbide Technology for long-term cutting of hollow brick Exceptional durability thanks to Bosch Carbide Technology. Fits all reciprocating saws with S-shank. Advantages Carbide Technology for long-lasting hollow brick sawing - For builders and bricklayers, cutting hollow bricks on site allows for fast and productive work. However, most reciprocating saw blades do not last long in such abrasive mineral materials. With a special carbide saw blade like the EXPERT 'Hollow Brick', masons can cut hollow bricks to size easily, without their blades breaking down. For tasks that conventional bi-metal reciprocating saw blades cannot handle, the Bosch EXPERT 'Hollow Brick' reciprocating saw blade uses Bosch Carbide Technology and is specially designed for cutting hollow bricks. The wide body and thick material provide stability for professionals to make an accurate cut. In the process, the brazed carbide teeth are strong enough to cut bricks all day long. Thanks to the Bosch EXPERT 'Hollow Brick' reciprocating saw blade, the reciprocating saw is fast becoming a favourite tool among bricklayers. Cut bricks to size with Bosch Carbide Technology. Fits all reciprocating saws with S-shank. Long life when cutting in hollow bricksFor tasks that conventional bi-metal reciprocating saw blades cannot handle, the Bosch Expert 'Hollow Brick' reciprocating saw blade uses Bosch Carbide Technology and is specially designed for cutting hollow bricks. The wide body and thick material provide stability for professionals to make an accurate cut. In addition, the brazed carbide teeth are strong enough to cut bricks all day long. Fits all reciprocating saws with S-shank, also called reciprocating saws or demolition saws. ds: dsc: kts: Expert reciprocating saw blade Hollow Brick kpn: S 1243 HM kpn_dash: kpn_clear: S1243HM bkpn: BOSCH S 1243 HM bkpn_clear: BOSCH S1243HM c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Reciprocating saw blade | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch sawing and cutting / Bosch reciprocating saw blade | Home / Our brands / Bosch / Bosch Ranges / Bosch expert sr_no_br_cl_ns: 2608900417 sr_ns: BOSCH2608900417
r: 02225325 p: 19.669 pid: 127729 b: BOSCH q: 0 st: lt: 5 ean: 3165140599306 sr: BOSCH 2608587169 sr_no_br: 2608587169 sr_no_br_cl: 2608587169 sr_cl: BOSCH2608587169 sr_dash: sold: 1435.837 p_range: none type: standard act: 1 avo: 1 av: Smallest diameter 4 mm Largest diameter 10 mm Drill set type Glass and tile drill bit set Quantity per set 5 n: BOSCH 2608587169 tile drill bit set CYL-9 SoftCeramic 5-piece cn: DRILL BIT SET cn2: DRILL BIT SET cn_clear: DRILLBITSET d: Product description 5-piece tile drill bit set CYL-9 SoftCeramic 4; 5; 6; 8; 10 mm Standard for drilling into tiles CYL-9 SoftCeramic tile drill bit is the standard drill bit for drilling in tiles Dry drilling without lubrication for convenient use Advantages Standard for drilling into tiles - The CYL-9 SoftCeramic tile drill bit is the standard drill bit for drilling into tiles. Dry drilling without lubrication is possible, making drilling with this drill bit effortless and comfortable. The drill has 1 single spiral and is especially suitable for drilling in soft to medium-hard tiles. This drill fits corded or cordless drills with a cylinder shank system. Drill without impact at low speeds. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: tile drill bit set CYL-9 SoftCeramic 5-piece kpn: 2608587169 kpn_dash: kpn_clear: 2608587169 bkpn: BOSCH 2608587169 bkpn_clear: BOSCH 2608587169 c_path: Home / Tools / Machining tools / Sets and kits / Drilling and punching / Drill bit set | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch sets and kits / Bosch drilling and punching / Bosch drill bit set sr_no_br_cl_ns: 2608587169 sr_ns: BOSCH2608587169
r: 02224819 p: 5.95 pid: 130294 b: BOSCH q: 16 st: 1 lt: 1 ean: 3165140599221 sr: BOSCH 2608587161 sr_no_br: 2608587161 sr_no_br_cl: 2608587161 sr_cl: BOSCH2608587161 sr_dash: sold: 1422.05 p_range: none type: standard act: 1 avo: 1 av: Diameter 6 mm Cutting length 80 mm Drill bit type Tile drill bit Overall length 80 mm Shank size 6 mm Shank type Cylindrical Material (drill bit) Carbide tip Number of cutting edges 2 ea n: BOSCH 2608587161 CYL-9 SoftCeramic tile drill bit, 6 x 80 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Tile drill bit CYL-9 SoftCeramic, 6 x 80 mm Standard for drilling into tiles CYL-9 SoftCeramic tile drill bit is the standard drill bit for drilling into tiles Dry drilling without lubrication for easy use Advantages Standard for drilling into tiles - The CYL-9 SoftCeramic tile drill bit is the standard drill bit for drilling into tiles. Dry drilling without lubrication is possible, making drilling with this drill bit effortless and comfortable. The drill has 1 single spiral and is especially suitable for drilling in soft to medium-hard tiles. This drill fits corded or cordless drills with a cylinder shaft system. Drill without impact at low speeds. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: CYL-9 SoftCeramic tile drill bit, 6 x 80 mm kpn: 2608587161 kpn_dash: kpn_clear: 2608587161 bkpn: BOSCH 2608587161 bkpn_clear: BOSCH 2608587161 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608587161 sr_ns: BOSCH2608587161
r: 02784875 p: 94.049 pid: 133939 b: BOSCH q: 0 st: lt: 12 ean: 3165140881005 sr: BOSCH 2608644350 sr_no_br: 2608644350 sr_no_br_cl: 2608644350 sr_cl: BOSCH2608644350 sr_dash: sold: 1410.735 p_range: KLIUM_PRODUCT_RANGE_196 type: standard act: 1 avo: 1 av: Saw blade diameter 254 mm Bore size 30 mm Number of teeth 6 Kerf width 2,4 mm For material Cement-bonded boards Mounting (saw blade/cutter) Round Product Range Bosch Expert n: BOSCH 2608644350 circular saw blade Expert for Fiber Cement, 254 x 30 x 2.4 mm, 6T cn: CIRCULAR SAW BLADE cn2: CIRCULAR SAW BLADE cn_clear: CIRCULARSAWBLADE d: Product description Circular saw blade Expert for Fibre Cement, 254 x 30 x 2.4 mm, 6T Extremely durable in fibre cement Expert for Fibre Cement circular saw blade is extremely durable when cutting fibre cement PCD (polycrystalline diamond) teeth give long service life Advantages Extremely durable - The Expert for Fibre Cement circular saw blade is extremely durable when cutting fibre cement. The blade features PCD (polycrystalline-diamond) teeth which gives a long service life. Performance is further supported by the ProteQtion coating, which prevents corrosion and delivers reliable cuts with reduced friction. In addition, the blade is specially designed with vibration-damping slots for effortless cutting, significantly reduced noise and significantly reduced vibration. Compatible with crosscut and mitre saws. The Expert for Fibre Cement circular saw blade features TCG (Triple Chip Ground) teeth for great strength and long life. Arbor works with or without reducing rings to fit different sizes. ds: dsc: kts: circular saw blade Expert for Fiber Cement, 254 x 30 x 2.4 mm, 6T kpn: 2608644350 kpn_dash: kpn_clear: 2608644350 bkpn: BOSCH 2608644350 bkpn_clear: BOSCH 2608644350 c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Circular saw blade | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch sawing and cutting / Bosch circular saw blade | Home / Our brands / Bosch / Bosch Ranges / Bosch expert sr_no_br_cl_ns: 2608644350 sr_ns: BOSCH2608644350
r: 02789985 p: 46.942 pid: 134089 b: BOSCH q: 0 st: lt: 6 ean: 3165140689816 sr: BOSCH 2608587017 sr_no_br: 2608587017 sr_no_br_cl: 2608587017 sr_cl: BOSCH2608587017 sr_dash: sold: 1408.26 p_range: none type: standard act: 1 avo: 1 av: Smallest diameter 1 mm Largest diameter 13 mm Drill set type Metal drilling set Quantity per set 25 n: BOSCH 2608587017 metal drill bit set Mini X-Line ProBox HSS-G, DIN 338, 135° 1-13 mm in plastic case 25-piece cn: DRILL BIT SET cn2: DRILL BIT SET cn_clear: DRILLBITSET d: Product description 25-piece metal drill bit set ProBox HSS-G, DIN 338, 135° 1-13 mm Drilling with maximum precision HSS spiral drill bit offers full-drill functionality for standard use on metal Self-centring, split 135-degree tip combines active cutting action with perfect centring without drift Advantages Maximum precision - The HSS spiral drill ground provides maximum precision when drilling into metal. The self-centring 135-degree split point combines active cutting action with perfect centring without running, delivering maximum precision. The split tip makes pre-punching or pre-drilling up to 10 mm unnecessary. This precision ground HSS (High-Speed Steel) drill bit offers up to 40% higher drilling speed and up to 50% lower feed pressure than standard ground HSS drills with chisel edges. This drill bit is designed for drilling holes in alloyed and unalloyed steel, cast steel, cast iron, sintered iron, temper cast iron, non-ferrous metals and hard plastics. The drill has a cylindrical shank (drill bit and shank have the same diameter) and is intended for use in drill stands and drill/screw machines. The HSS spiral drill ground is produced in accordance with DIN 338. The drill bit is type N (groove angle) with a tip of 135 degrees and a diameter tolerance of h8. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: metal drill bit set Mini X-Line ProBox HSS-G, DIN 338, 135° 1-13 mm in plastic case 25-piece kpn: 2608587017 kpn_dash: kpn_clear: 2608587017 bkpn: BOSCH 2608587017 bkpn_clear: BOSCH 2608587017 c_path: Home / Tools / Machining tools / Sets and kits / Drilling and punching / Drill bit set | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch sets and kits / Bosch drilling and punching / Bosch drill bit set sr_no_br_cl_ns: 2608587017 sr_ns: BOSCH2608587017
r: 02784542 p: 37.851 pid: 133901 b: BOSCH q: 1 st: 1 lt: 1 ean: 3165140796453 sr: BOSCH 2608644079 sr_no_br: 2608644079 sr_no_br_cl: 2608644079 sr_cl: BOSCH2608644079 sr_dash: sold: 1400.487 p_range: KLIUM_PRODUCT_RANGE_196 type: standard act: 1 avo: 1 av: Saw blade diameter 216 mm Bore size 30 mm Number of teeth 40 Kerf width 2,4 mm For material Wood Mounting (saw blade/cutter) Round Product Range Bosch Expert n: BOSCH 2608644079 circular saw blade Expert for Wood, 216 x 30 x 2.4 mm, 40T cn: CIRCULAR SAW BLADE cn2: CIRCULAR SAW BLADE cn_clear: CIRCULARSAWBLADE d: Product description Circular saw blade Expert for Wood, 216 x 30 x 2.4 mm, 40T Long lifetime with high cutting performance in wood Expert for Wood circular saw blades have a long lifetime with great cutting performance in wood Extra Hard MicroteQ teeth are manufactured in-house by Bosch from high-strength carbide grit for high durability Advantages Long cutting life - MicroteQ teeth (manufactured in-house) from high-density carbide and the robust tooth shape are ideal for universal use Compatible with cut-off saws and cross-cut saws Depending on the number of teeth, different results can be achieved with all Expert for Wood circular saw blades, which feature an Alternate Top Bevel (ATB) tooth geometry: with a large number of teeth, the blade gives clean cuts, while a low number of teeth delivers solid and efficient cuts. Arbor works with or without reducing rings to fit different sizes. ds: dsc: Scope of delivery Paper / cardboard / corrugated board - packaging, sleeve, with Euro die-cut kts: circular saw blade Expert for Wood, 216 x 30 x 2.4 mm, 40T kpn: 2608644079 kpn_dash: kpn_clear: 2608644079 bkpn: BOSCH 2608644079 bkpn_clear: BOSCH 2608644079 c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Circular saw blade | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch sawing and cutting / Bosch circular saw blade | Home / Our brands / Bosch / Bosch Ranges / Bosch expert sr_no_br_cl_ns: 2608644079 sr_ns: BOSCH2608644079
r: 02791434 p: 173.388 pid: 136972 b: BOSCH q: 0 st: lt: 8 ean: 3165140625081 sr: BOSCH 2608587007 sr_no_br: 2608587007 sr_no_br_cl: 2608587007 sr_cl: BOSCH2608587007 sr_dash: sold: 1387.104 p_range: none type: standard act: 1 avo: 1 av: Smallest diameter 38 mm Largest diameter 150 mm Drill set type Diamond drill bit set Quantity per set 5 n: BOSCH 2608587007 diamond core set for dry drilling 1/2" 127 x 150 mm 5-piece cn: DRILL BIT SET cn2: DRILL BIT SET cn_clear: DRILLBITSET d: Product description 5-piece diamond core set for dry drilling 1/2" 38; 52; 65; 117; 127 x 150 x 7 mm Reliable drilling in masonry Standard for Universal diamond drill core set for dry use offers reliable drilling in masonry Segments are laser-welded to ensure durability Advantages Reliable drilling in masonry - The Standard for Universal dry-use diamond drilling crown offers reliable drilling in masonry. The segments are laser-welded to ensure durability and allow dry drilling in masonry for junction boxes, wall sockets, plumbing pipes and so on. This diamond dry drilling crown is designed for building materials such as limestone, brick and masonry. It is suitable for use with diamond drilling tools. Suitable for 1/2-inch threaded diamond drill bits. ds: dsc: Scope of delivery Unpacked, without Euro punching kts: diamond core set for dry drilling 1/2" 127 x 150 mm 5-piece kpn: 2608587007 kpn_dash: kpn_clear: 2608587007 bkpn: BOSCH 2608587007 bkpn_clear: BOSCH 2608587007 c_path: Home / Tools / Machining tools / Sets and kits / Drilling and punching / Drill bit set | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch sets and kits / Bosch drilling and punching / Bosch drill bit set sr_no_br_cl_ns: 2608587007 sr_ns: BOSCH2608587007
r: 08051634 p: 62.644 pid: 138250 b: BOSCH q: 3 st: 1 lt: 1 ean: 4059952531885 sr: BOSCH 2608900115 sr_no_br: 2608900115 sr_no_br_cl: 2608900115 sr_cl: BOSCH2608900115 sr_dash: sold: 1378.168 p_range: KLIUM_PRODUCT_RANGE_196 type: standard act: 1 avo: 1 av: Diameter 12 mm Drill bit type Hammer drill bit Overall length 1000 mm Shank type SDS-plus Material (drill bit) Carbide tip Number of cutting edges 4 ea Cutting length 950 mm Product Range Bosch Expert n: BOSCH 2608900115 Expert hammer drill SDS-Plus-7X, 12x950x1000mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description EXPERT Hammer drill bit SDS plus-7X 12x950x1000mm Lasts up to 3x longer than a Bosch SDS plus-3 drill bit Exceptionally durable drill head with Bosch Carbide Technology. Fits all SDS plus rotary hammers. Advantages Lasts up to 3x longer than a Bosch SDS plus-3 drill bit - Drilling through reinforced concrete is a tough job and it always takes its toll on your drills. Ordinary drills with two cutting edges get stuck in rebar and will eventually break. The carbide head of the EXPERT SDS plus-7X is an advanced design with 4 cutting edges made in one piece of the strongest metal: it does not jam and has no weakness. Thanks to Bosch Carbide Technology and the carbide tip, the EXPERT SDS plus-7X lasts much longer than ordinary hammer drills. It passes through rebar effectively. So there is no need to stop, re-centre or change drills when hitting steel. For construction professionals who regularly drill into concrete and reinforced concrete, for example for fixings and installations, the Bosch EXPERT SDS plus-7X hammer drill offers unparalleled performance, reliability and long life. The EXPERT accessory for SDS plus rotary hammers. Fits all SDS plus rotary hammers. Long service life when drilling in reinforced concreteThanks to Bosch Carbide Technology and the carbide tip, the Expert SDS plus-7X lasts much longer than ordinary hammer drills. It passes through reinforced concrete effectively. So there is no need to stop, re-centre or change drill bits when hitting steel. Fits all SDS plus hammer drills. ds: dsc: kts: Expert hammer drill SDS-Plus-7X, 12x950x1000mm kpn: 2608900115 kpn_dash: kpn_clear: 2608900115 bkpn: BOSCH 2608900115 bkpn_clear: BOSCH 2608900115 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit | Home / Our brands / Bosch / Bosch Ranges / Bosch expert sr_no_br_cl_ns: 2608900115 sr_ns: BOSCH2608900115
r: 02963721 p: 9.752 pid: 134111 b: BOSCH q: 0 st: lt: 6 ean: 3165140933834 sr: BOSCH 2608615166 sr_no_br: 2608615166 sr_no_br_cl: 2608615166 sr_cl: BOSCH2608615166 sr_dash: sold: 1345.776 p_range: KLIUM_PRODUCT_RANGE_199 type: standard act: 1 avo: 1 av: (Disc) diameter 125 mm Connection size (disc) 22,2 mm Connection type (disc) X-Lock Disc application Cutting For material Brick Thickness 2 mm Product Range Bosch X-lock n: BOSCH 2608615166 X-LOCK diamond wheel Standard for Universal 125 x 22.23 x 2.0 x 10 mm cn: DIAMOND CUTTING DISC cn2: DIAMOND CUTTING DISC cn_clear: DIAMONDCUTTINGDISC d: Product description X-LOCK Diamond disc Standard for Universal 125 x 22,23 x 2,0 x 10 mm Reliable cutting of general building materials X-LOCK Standard for Universal diamond cutting disc cuts reliably through general building materials Optimised diamond matrix ensures guaranteed good results thanks to high quality standards Advantages Reliable cutting - The X-LOCK Standard for Universal diamond cutting disc cuts reliably through general building materials. The improved diamond matrix is guaranteed to perform well thanks to high quality standards. The Bosch Competence Centre for diamond in Switzerland guarantees these standards by ensuring the same high quality every time. X-LOCK cut-off wheels also fit standard angle grinders. Tool-free X-LOCK system for changing cut-off wheels quickly and easily. Snap it on with X-LOCK: the fastest accessory exchange system on the market. Also fits nut and threaded angle grinders. ds: dsc: kts: X-LOCK diamond wheel Standard for Universal 125 x 22.23 x 2.0 x 10 mm kpn: 2608615166 kpn_dash: kpn_clear: 2608615166 bkpn: BOSCH 2608615166 bkpn_clear: BOSCH 2608615166 c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Diamond cutting disc | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch sawing and cutting / Bosch diamond cutting disc | Home / Our brands / Bosch / Bosch Ranges / Bosch x-lock sr_no_br_cl_ns: 2608615166 sr_ns: BOSCH2608615166
r: 02220354 p: 56.033 pid: 130579 b: BOSCH q: 0 st: lt: 6 ean: 3165140029414 sr: BOSCH 1618661000 sr_no_br: 1618661000 sr_no_br_cl: 1618661000 sr_cl: BOSCH1618661000 sr_dash: sold: 1344.792 p_range: none type: standard act: 1 avo: 1 av: Length 400 mm Chisel type Spade chisel Width 80 mm Shank size 28 mm Shank type Hex n: BOSCH 1618661000 spade chisel, hexagonal head, 28 x 400 x 80 mm cn: CHISEL cn2: CHISEL cn_clear: CHISEL d: Product description Spade chisel hexagonal head, 28 x 400 x 80 mm Standard chiselling in concrete and brick for various demolition applications Spade chisel offers standard chiselling for various demolition applications in concrete and brick The chisel has a wide cutting edge and offers high material removal in masonry and mortar Advantages Various demolition applications - The spade chisel offers standard chiselling for various demolition applications in concrete and brick. The chisel has a wide cutting edge and offers high material removal in masonry and mortar. The tool is also designed for adjustment work of asphalt, masonry and concrete. The chisel is compatible with a 28 mm hex shank system for hammers. With 28 mm hex shank for breaker hammers. ds: dsc: Scope of delivery Unpacked, without Euro punching kts: spade chisel, hexagonal head, 28 x 400 x 80 mm kpn: 1618661000 kpn_dash: kpn_clear: 1618661000 bkpn: BOSCH 1618661000 bkpn_clear: BOSCH 1618661000 c_path: Home / Tools / Machining tools / Surface treatment / Planing and chiseling / Chisel | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch surface treatment / Bosch planing and chiseling / Bosch chisel sr_no_br_cl_ns: 1618661000 sr_ns: BOSCH1618661000
r: 02221808 p: 268.429 pid: 133158 b: BOSCH q: 0 st: lt: 8 ean: 3165140565875 sr: BOSCH 2608586805 sr_no_br: 2608586805 sr_no_br_cl: 2608586805 sr_cl: BOSCH2608586805 sr_dash: sold: 1342.145 p_range: none type: standard act: 1 avo: 1 av: Diameter 40 mm Drill bit type Hammer drill bit Overall length 1320 mm Shank size 18 mm Shank type SDS-max Material (drill bit) Carbide tip Number of cutting edges 4 ea Cutting length 1200 mm n: BOSCH 2608586805 hammer drill SDS-Max-7, 40 x 1200 x 1320 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Hammer drill bit SDS-Max-7, 40 x 1200 x 1320 mm Highest drilling speeds Drill bit SDS max-7 is ideally suited to high-speed drilling Solid carbide S cutter and curved side cutters allow drilling at very high speeds Advantages Highest drilling speeds - The SDS max-7 drill bit is ideally suited for drilling at high speeds. The solid carbide S-mill and curved side cutters enable drilling at very high speeds. The version with spirals for virtually vibration-free drilling ensures the best power transfer and enables faster drilling. This drill bit is suitable for drilling in concrete and reinforced concrete, limestone and masonry. This drill fits rotary hammers with an SDS max holder. The wear indicator shows whether the diameter of the hole is within tolerance, which is necessary to accurately set the metal anchor. The quality mark of the PGM Masonry Drill Bit Association Board on this drill bit guarantees that it is within close tolerances, drills very accurately and does not slip while drilling fixing holes. Fits all SDS max rotary hammers. ds: dsc: kts: hammer drill SDS-Max-7, 40 x 1200 x 1320 mm kpn: 2608586805 kpn_dash: kpn_clear: 2608586805 bkpn: BOSCH 2608586805 bkpn_clear: BOSCH 2608586805 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608586805 sr_ns: BOSCH2608586805
r: 02225406 p: 57.685 pid: 127777 b: BOSCH q: 0 st: lt: 4 ean: 3165140033435 sr: BOSCH 1618598159 sr_no_br: 1618598159 sr_no_br_cl: 1618598159 sr_cl: BOSCH1618598159 sr_dash: sold: 1326.755 p_range: none type: standard act: 1 avo: 1 av: Shank type SDS-max Tool holder size Tool holder type SDS-plus Thread type (tool holder) n: BOSCH 1618598159 drill chuck for drills SDS-Max SDS-Plus cn: ARBOR cn2: ARBOR cn_clear: ARBOR d: Product description Drill chuck for drills SDS-max, SDS-Plus From SDS max to SDS plus Drill bit adapter for rotary hammers converts from an SDS max shank to SDS plus drill bits Benefits From SDS max to SDS plus - The drill adapter for rotary hammers converts from an SDS max shank to SDS plus drills. Fits all SDS plus rotary hammers. ds: dsc: Scope of delivery Plastic packaging, hanger, with Euro punching kts: drill chuck for drills SDS-Max SDS-Plus kpn: 1618598159 kpn_dash: kpn_clear: 1618598159 bkpn: BOSCH 1618598159 bkpn_clear: BOSCH 1618598159 c_path: Home / Tools / Machining tools / Accessories and spare parts / Arbor | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch accessories and spare parts / Bosch arbor sr_no_br_cl_ns: 1618598159 sr_ns: BOSCH1618598159
r: 02963688 p: 1.33 pid: 132642 b: BOSCH q: 95 st: 1 lt: 1 ean: 3165140947442 sr: BOSCH 2608619254 sr_no_br: 2608619254 sr_no_br_cl: 2608619254 sr_cl: BOSCH2608619254 sr_dash: sold: 1308.72 p_range: KLIUM_PRODUCT_RANGE_196 type: standard act: 1 avo: 1 av: (Disc) diameter 125 mm Connection size (disc) 22,2 mm Connection type (disc) X-Lock For material Metal Shape (cutting disc) Flat Thickness 1,6 mm Product Range Bosch Expert n: BOSCH 2608619254 X-LOCK grinding disc straight Expert for Metal 125x1.6x22.23mm cn: CUTTING DISC cn2: CUTTING DISC cn_clear: CUTTINGDISC d: Product description X-LOCK Grinding Disc Expert for Metal 125x1.6x22.23mm, straight Fast grinding in metal X-LOCK Expert for Metal cutting disc passes powerfully through metal with maximum safety High-quality disc made of aluminium oxide with advanced phenolic resin that performs well even in the toughest jobs Advantages Works fast and powerful - The X-LOCK Expert for Metal cut-off wheel powerfully cuts through metal with maximum safety. The disc is made of high-quality aluminium oxide with advanced phenolic resin, which delivers good results in even the most demanding applications. In addition, a precisely manufactured mesh of fibreglass makes grinding significantly more stable, durable and safe. Cut-off wheels from Bosch meet the highest safety requirements, such as EN 12413, FEPA and oSa. X-LOCK cut-off wheels also fit standard angle grinders. Tool-free X-LOCK system for changing cut-off wheels quickly and conveniently. Snap it on with X-LOCK: the fastest accessory exchange system on the market. Also fits nut and threaded angle grinders. ds: dsc: kts: X-LOCK grinding disc straight Expert for Metal 125x1.6x22.23mm kpn: 2608619254 kpn_dash: kpn_clear: 2608619254 bkpn: BOSCH 2608619254 bkpn_clear: BOSCH 2608619254 c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Cutting disc | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch sawing and cutting / Bosch cutting disc | Home / Our brands / Bosch / Bosch Ranges / Bosch expert sr_no_br_cl_ns: 2608619254 sr_ns: BOSCH2608619254
r: 08051674 p: 48.429 pid: 136596 b: BOSCH q: 3 st: 1 lt: 1 ean: 4059952532288 sr: BOSCH 2608900155 sr_no_br: 2608900155 sr_no_br_cl: 2608900155 sr_cl: BOSCH2608900155 sr_dash: sold: 1307.583 p_range: KLIUM_PRODUCT_RANGE_196 type: standard act: 1 avo: 1 av: Diameter 30 mm Drill bit type Hammer drill bit Overall length 450 mm Shank type SDS-plus Material (drill bit) Carbide tip Number of cutting edges 4 ea Cutting length 400 mm Product Range Bosch Expert n: BOSCH 2608900155 Expert hammer drill SDS-Plus-7X, 30x400x450mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description EXPERT Hammer drill bit SDS plus-7X 30x400x450mm Lasts up to 3x longer than a Bosch SDS plus-3 drill bit Exceptionally durable drill head with Bosch Carbide Technology. Fits all SDS plus rotary hammers. Advantages Lasts up to 3x longer than a Bosch SDS plus-3 drill bit - Drilling through reinforced concrete is a tough job and it always takes its toll on your drills. Ordinary drills with two cutting edges get stuck in rebar and will eventually break. The carbide head of the EXPERT SDS plus-7X is an advanced design with 4 cutting edges made in one piece of the strongest metal: it does not jam and has no weakness. Thanks to Bosch Carbide Technology and the carbide tip, the EXPERT SDS plus-7X lasts much longer than ordinary hammer drills. It passes through rebar effectively. So there is no need to stop, re-centre or change drills when hitting steel. For construction professionals who regularly drill into concrete and reinforced concrete, for example for fixings and installations, the Bosch EXPERT SDS plus-7X hammer drill offers unparalleled performance, reliability and long life. The EXPERT accessory for SDS plus rotary hammers. Fits all SDS plus rotary hammers. Long service life when drilling in reinforced concreteThanks to Bosch Carbide Technology and the carbide tip, the Expert SDS plus-7X lasts much longer than ordinary hammer drills. It passes through reinforced concrete effectively. So there is no need to stop, re-centre or change drill bits when hitting steel. Fits all SDS plus hammer drills. ds: dsc: kts: Expert hammer drill SDS-Plus-7X, 30x400x450mm kpn: 2608900155 kpn_dash: kpn_clear: 2608900155 bkpn: BOSCH 2608900155 bkpn_clear: BOSCH 2608900155 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit | Home / Our brands / Bosch / Bosch Ranges / Bosch expert sr_no_br_cl_ns: 2608900155 sr_ns: BOSCH2608900155
r: 47992516 p: 11.404 pid: 155551 b: BOSCH q: 9 st: 1 lt: 1 ean: 3165140093521 sr: BOSCH 2608656016 sr_no_br: 2608656016 sr_no_br_cl: 2608656016 sr_cl: BOSCH2608656016 sr_dash: sold: 1288.652 p_range: none type: standard act: 1 avo: 1 av: Length 150 mm For material Wood; Metal Number of teeth per inch 10 Quantity per blister 5 Thickness 0,9 mm n: BOSCH S 922 HF reciprocating saw blade Flexible for Wood and Metal (5 pcs) - 2608656016 cn: RECIPROCATING SAW BLADE cn2: RECIPROCATING SAW BLADE cn_clear: RECIPROCATINGSAWBLADE d: Product description Reciprocating saw blade S 922 HF Flexible for Wood and Metal 5x Cutting in wood with nails, mild steel, non-ferrous metals S 922 HF Flexible for Wood and Metal reciprocating saw blade cuts in wood and metal Milled and set teeth for cuts without special requirements Advantages Cutting in wood and metal - the S 922 HF Flexible for Wood and Metal reciprocating saw blade cuts in wood and metal. The milled and set teeth make the blade ideal for cutting without special requirements. Moreover, the BIM (bi-metal) blade is optimised for cutting soft nails, mild steel and non-ferrous metal components embedded in wood. The standard length (150 mm) gives a cutting capacity of up to 100 mm. Equipped with 1/2-inch universal shank. Fits all reciprocating saws with S-shank. ds: dsc: Scope of delivery Paper / cardboard / corrugated board - packaging, case, with Euro die-cut kts: reciprocating saw blade Flexible for Wood and Metal (5 pcs) kpn: S 922 HF kpn_dash: kpn_clear: S922HF bkpn: BOSCH S 922 HF bkpn_clear: BOSCH S922HF c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Reciprocating saw blade | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch sawing and cutting / Bosch reciprocating saw blade sr_no_br_cl_ns: 2608656016 sr_ns: BOSCH2608656016
r: 02224074 p: 9.752 pid: 129965 b: BOSCH q: 10 st: 1 lt: 1 ean: 3165140309042 sr: BOSCH 2608636335 sr_no_br: 2608636335 sr_no_br_cl: 2608636335 sr_cl: BOSCH2608636335 sr_dash: sold: 1287.264 p_range: none type: standard act: 1 avo: 1 av: Length 180 mm For material Metal Quantity per blister 3 n: BOSCH 2608636335 jigsaw blade T 718 BF Metal-Sandwich (3 pack) cn: JIGSAW BLADE cn2: JIGSAW BLADE cn_clear: JIGSAWBLADE d: Product description Jigsaw blade T718 BF Metal-Sandwich 3x Break-resistant for sandwich metal T 718 BF Flexible for Metal-Sandwich jigsaw blade is break-resistant when making straight cuts in metal Milled and corrugated teeth are designed for cutting in metal sandwich panels. Advantages Break-resistant for sandwich metal - The T 718 BF Flexible for Metal Sandwich jigsaw blade is break-resistant when making straight cuts in metal. The milled and corrugated teeth are designed for cutting in metal sandwich panels. The fully hardened HSS (high-speed steel) BIM (bimetallic) teeth are bonded to a highly elastic HCS (high carbon steel) body that reduces the risk of breakage and provides the hardness and flexibility needed to cut through metal sandwich panels. The blade features fine tooth spacing (2.0 mm) and a long length (180 mm) for cutting metal sandwich panels up to 120 mm thick. For use with jigsaws with a T-shank click system. Fits all jigsaws with a T-shank. ds: dsc: Scope of delivery Paper / cardboard / corrugated board - packaging, folding carton, with Euro die-cutting kts: jigsaw blade T 718 BF Metal-Sandwich (3 pack) kpn: 2608636335 kpn_dash: kpn_clear: 2608636335 bkpn: BOSCH 2608636335 bkpn_clear: BOSCH 2608636335 c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Jigsaw blade | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch sawing and cutting / Bosch jigsaw blade sr_no_br_cl_ns: 2608636335 sr_ns: BOSCH2608636335
r: 02224335 p: 181.487 pid: 131485 b: BOSCH q: 0 st: lt: 8 ean: 3165140235518 sr: BOSCH 2608656259 sr_no_br: 2608656259 sr_no_br_cl: 2608656259 sr_cl: BOSCH2608656259 sr_dash: sold: 1270.409 p_range: none type: standard act: 1 avo: 1 av: Length 150 mm For material Wood; Metal Number of teeth per inch 6 Quantiy per pack 100 Thickness 1,25 mm n: BOSCH S 611 DF reciprocating saw blade Heavy for Wood and Metal (100 pcs) - 2608656259 cn: RECIPROCATING SAW BLADE cn2: RECIPROCATING SAW BLADE cn_clear: RECIPROCATINGSAWBLADE d: Product description Reciprocating saw blade S 611 DF Heavy for Wood and Metal 100x Fast cuts when demolishing windows S 611 DF Heavy for Wood and Metal reciprocating saw blade delivers fast plunge cuts in wood and metal Tooth gap (4.3 mm) and set teeth for fast results Advantages Fast cuts - The S 611 DF Heavy for Wood and Metal reciprocating saw blade delivers fast plunge cuts in wood and metal. The large tooth spacing (4.3 mm) and set teeth give fast results in all common window sizes. The fully tapered reciprocating saw blade gives easy access to hard-to-reach areas, while the pointed end is suitable for plunge cuts. Moreover, the bi-metal base is combined with a high-carbon steel (HCS) blade and high-speed steel (HSS) teeth, making it optimal for window demolition. The blade has a standard length of 150 mm, giving a cutting capacity of up to 100 mm. For use with reciprocating saw with 1/2-inch universal shank systems. Fits all reciprocating saws with S-shank. ds: dsc: Scope of delivery Paper / cardboard / corrugated board - packaging, box, without Eurostamping kts: reciprocating saw blade Heavy for Wood and Metal (100 pcs) kpn: S 611 DF kpn_dash: kpn_clear: S611DF bkpn: BOSCH S 611 DF bkpn_clear: BOSCH S611DF c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Reciprocating saw blade | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch sawing and cutting / Bosch reciprocating saw blade sr_no_br_cl_ns: 2608656259 sr_ns: BOSCH2608656259
r: 08120335 p: 39.504 pid: 161354 b: BOSCH q: 7 st: 1 lt: 1 ean: 4059952629247 sr: BOSCH 2608669067 sr_no_br: 2608669067 sr_no_br_cl: 2608669067 sr_cl: BOSCH2608669067 sr_dash: sold: 1264.128 p_range: none type: standard act: 1 avo: 1 av: Width (saw blade) 32 mm Length (saw blade) 50 mm For material Wood; Metal Saw blade type Plunge-cut blade Connection profile Starlock Shape (saw blade) Curved n: BOSCH 2608669067 PRO Starlock AIZ 32 APIB BIM circular saw blade Wood+Metal, 32 x 50 mm (5 pcs) cn: SAW BLADE FOR OSCILLATING MULTI-TOOL cn2: SAW BLADE FOR OSCILLATING MULTI-TOOL cn_clear: SAWBLADEFOROSCILLATINGMULTITOOL d: Product description Lasts up to 5x longer than an AIZ 20 AB multitool saw blade from Bosch Long service life when cutting wood, soft metal and plastic Combines hard teeth and a flexible body through bimetal welding Starlock connection for optimum power transfer and an easy saw blade change within three seconds ds: dsc: kts: PRO Starlock AIZ 32 APIB BIM circular saw blade Wood+Metal, 32 x 50 mm (5 pcs) kpn: 2608669067 kpn_dash: kpn_clear: 2608669067 bkpn: BOSCH 2608669067 bkpn_clear: BOSCH 2608669067 c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Saw blade for oscillating multi-tool | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch sawing and cutting / Bosch saw blade for oscillating multi-tool sr_no_br_cl_ns: 2608669067 sr_ns: BOSCH2608669067
r: 02224407 p: 29.586 pid: 130112 b: BOSCH q: 1 st: 1 lt: 1 ean: 3165140425995 sr: BOSCH 2608690106 sr_no_br: 2608690106 sr_no_br_cl: 2608690106 sr_cl: BOSCH2608690106 sr_dash: sold: 1242.612 p_range: none type: standard act: 1 avo: 1 av: Length 400 mm Chisel type Pointed chisel Shank size 28 mm Shank type Hex n: BOSCH 2608690106 pointed chisel with hexagonal head, 28 x 400 mm cn: CHISEL cn2: CHISEL cn_clear: CHISEL d: Product description Point chisel hexagonal head, 28 x 400 mm Constantly high stock removal and no work interruptions Pointed chisel offers consistently high stock removal Fast work progress thanks to self-sharpening function Advantages High stock removal - The point chisel offers consistently high stock removal thanks to the self-sharpening function. The special star shape at the end maintains the shape of the accessory to prevent work interruptions. The chisel is intended for use on concrete and brick for drilling and demolition work, such as repairing joints and removing reinforcements. The chisel is compatible with a hex shank system for 28 mm hammers. The self-sharpening point chisel offers 30% more material removal compared to standard point chisels. With 28 mm hex shank for breakers. ds: dsc: Scope of delivery Unpacked, without Euro punching kts: pointed chisel with hexagonal head, 28 x 400 mm kpn: 2608690106 kpn_dash: kpn_clear: 2608690106 bkpn: BOSCH 2608690106 bkpn_clear: BOSCH 2608690106 c_path: Home / Tools / Machining tools / Surface treatment / Planing and chiseling / Chisel | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch surface treatment / Bosch planing and chiseling / Bosch chisel sr_no_br_cl_ns: 2608690106 sr_ns: BOSCH2608690106
