r: 02790029 p: 4.24 pid: 136024 b: BOSCH q: 0 st: lt: 8 ean: 3165140858823 sr: BOSCH 2608577054 sr_no_br: 2608577054 sr_no_br_cl: 2608577054 sr_cl: BOSCH2608577054 sr_dash: sold: 21.2 p_range: none act: 1 avo: av: Diameter 4,2 mm Cutting length 43 mm Drill bit type Metal drill bit Overall length 83 mm Shank size 1/4 inch Shank type Hex Material (drill bit) HSS n: BOSCH 2608577054 twist drill bit HSS hex shank 4.2 x 43 x 83 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Spiral drill bit HSS hex shank 4.2 x 43 x 83 mm Very robust with impact screwdrivers Extremely robust Impact Control HSS spiral drill for drilling in metal, especially with impact screwdrivers The super-strong body is extremely robust Advantages Extremely robust - The very robust Impact Control HSS spiral drill bit is suitable for drilling in metal, especially with impact screwdrivers. The very strong body is exceptionally robust. The spiral drill is precision ground from solid metal and fitted with an oxide-coated groove. This gives the drill an excellent surface quality for low-wear drilling into materials. Suitable for alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non-ferrous metals, metal sheets and plastics. This drill bit is suitable for drive systems for 1/4-inch hex shafts, for universal use with drill/screwdrivers, impact screwdrivers and drill stands. Hex shank for maximum power transfer in standard three-claw drill chucks and drill/screwdriver holders. ds: dsc: kts: twist drill bit HSS hex shank 4.2 x 43 x 83 mm kpn: 2608577054 kpn_dash: kpn_clear: 2608577054 bkpn: BOSCH 2608577054 bkpn_clear: BOSCH 2608577054 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608577054 sr_ns: BOSCH2608577054
r: 02790033 p: 4.24 pid: 136836 b: BOSCH q: 0 st: lt: 8 ean: 3165140858830 sr: BOSCH 2608577055 sr_no_br: 2608577055 sr_no_br_cl: 2608577055 sr_cl: BOSCH2608577055 sr_dash: sold: 21.2 p_range: none act: 1 avo: av: Diameter 4,5 mm Cutting length 47 mm Drill bit type Metal drill bit Overall length 87 mm Shank size 1/4 inch Shank type Hex Material (drill bit) HSS n: BOSCH 2608577055 twist drill bit HSS hex shank 4.5 x 47 x 87 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Spiral drill bit HSS hex shank 4.5 x 47 x 87 mm Very robust with impact screwdrivers Extremely robust Impact Control HSS spiral drill for drilling in metal, especially with impact screwdrivers The super-strong body is extremely robust Advantages Extremely robust - The very robust Impact Control HSS spiral drill bit is suitable for drilling in metal, especially with impact screwdrivers. The very strong body is exceptionally robust. The spiral drill is precision ground from solid metal and fitted with an oxide-coated groove. This gives the drill an excellent surface quality for low-wear drilling into materials. Suitable for alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non-ferrous metals, metal sheets and plastics. This drill bit is suitable for drive systems for 1/4-inch hex shafts, for universal use with drill/screwdrivers, impact screwdrivers and drill stands. Hex shank for maximum power transfer in standard three-claw drill chucks and drill/screwdriver holders. ds: dsc: kts: twist drill bit HSS hex shank 4.5 x 47 x 87 mm kpn: 2608577055 kpn_dash: kpn_clear: 2608577055 bkpn: BOSCH 2608577055 bkpn_clear: BOSCH 2608577055 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608577055 sr_ns: BOSCH2608577055
r: 02811010 p: 20.85 pid: 140584 b: BOSCH q: 0 st: lt: 8 ean: 3165140599320 sr: BOSCH 2609255588 sr_no_br: 2609255588 sr_no_br_cl: 2609255588 sr_cl: BOSCH2609255588 sr_dash: sold: 20.85 p_range: KLIUM_PRODUCT_RANGE_196 act: 1 avo: av: Smallest diameter 5 mm Largest diameter 8 mm Drill set type Glass and tile drill bit set Quantity per set 3 Product Range Bosch Expert n: BOSCH 2609255588 Expert tile drill bit set 5/6/8 mm 3-piece cn: DRILL BIT SET cn2: DRILL BIT SET cn_clear: DRILLBITSET d: Product description DRILL MP (3D. SET TILE DRILL EXPERT 5X70, 6X80, 8X80) Accurate drilling in soft and medium-thick tiles Clean work, no cooling required With diamond-ground tungsten carbide cutting edge for exact centring drilling Advantages DRILLS MP (3D. SET TILE BORE EXPERT 5X70, 6X80, 8X80) Drill bit colour: white Drill bit colour: white Reinforced head for maximum service life ds: dsc: Scope of delivery 3D. SET OF TILE DRILL EXPERT 5X70, 6X80, 8X80 kts: Expert tile drill bit set 5/6/8 mm 3-piece kpn: 2609255588 kpn_dash: kpn_clear: 2609255588 bkpn: BOSCH 2609255588 bkpn_clear: BOSCH 2609255588 c_path: Home / Tools / Machining tools / Sets and kits / Drilling and punching / Drill bit set | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch sets and kits / Bosch drilling and punching / Bosch drill bit set | Home / Our brands / Bosch / Bosch product ranges / Bosch expert sr_no_br_cl_ns: 2609255588 sr_ns: BOSCH2609255588
r: 02222351 p: 19.73 pid: 131875 b: BOSCH q: 0 st: lt: 8 ean: 3165140099981 sr: BOSCH 2608597231 sr_no_br: 2608597231 sr_no_br_cl: 2608597231 sr_cl: BOSCH2608597231 sr_dash: sold: 19.73 p_range: none act: 1 avo: av: Diameter 4 mm Material (drill bit) HSS-R Cutting length 22 mm Standard DIN 1897 Quantity per blister 10 Shank type Cylindrical Shank size 4 mm Overall length 55 mm Drill bit type Metal drill bit n: BOSCH 2608597231 body drill bit HSS-R, DIN 1897, 4 x 22 x 55 mm (10 pieces) cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Body drill bit HSS-R, DIN 1897, 4 x 22 x 55 mm 10x Extra short drill bit for drilling in tight spots Extra short drill bit for drilling in tight spaces The spiral has an ideal useful length for most work in tight places Advantages For tight spots - The HSS body drill bit is an extra short drill bit for drilling in tight spots, applying holes in metal sheets and pipes with a thickness of 2-6 mm. The drill has a spiral with ideal useful length for most work in tight places. Simple drilling without pre-punching thanks to self-centring, split tip that prevents slippage and enables effective drilling in tight spaces. Suitable for construction steel, alloy metal, non-ferrous metal and plastics. This drill has a cylindrical shank (drill bit and shank have the same diameter) and is intended for use in drill stands and drill/screw machines. Also very suitable for hand drilling. The HSS body drill bit is manufactured in accordance with DIN 1897. The drill bit is type N (groove angle) with a tip of 118 degrees and a diameter tolerance of h8. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: body drill bit HSS-R, DIN 1897, 4 x 22 x 55 mm (10 pieces) kpn: 2608597231 kpn_dash: kpn_clear: 2608597231 bkpn: BOSCH 2608597231 bkpn_clear: BOSCH 2608597231 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608597231 sr_ns: BOSCH2608597231
r: 02066744 p: 4.92 pid: 128885 b: BOSCH q: 0 st: lt: 5 ean: 3165140388412 sr: BOSCH 2609256238 sr_no_br: 2609256238 sr_no_br_cl: 2609256238 sr_cl: BOSCH2609256238 sr_dash: sold: 19.68 p_range: none type: standard act: 1 avo: av: Width 13 mm Length 451 mm Grit size 60 n: BOSCH 2609256238 sanding belt 13x451 mm grit 60 for wood for Black&Decker electric files (3 pcs) cn: SANDING BELT cn2: SANDING BELT cn_clear: SANDINGBELT d: Product description SANDING/POLISHING MP (SANDING BELT 13X451 MM, G60, RW, UNPERF., SPAN, B&D POWERFILE (3)) Powerful and fast material removal in tight spaces Very sturdy and durable sanding belts with high-quality belt joints for perfect surfaces With high-precision, clean belt run for the best surface quality and dust-free sanding belts, workpieces and power tools thanks to the anti-static structure Advantages SANDING/POLISHING MP (SANDING BELT 13X451 MM, G60, RW, UNPERF. , SPAN, B&D POWERFILE (3)) Very sturdy and durable sanding belts with high-quality belt joints for perfect surfaces With high-precision, clean belt run for the best surface quality and dust-free sanding belts, workpieces and power tools due to the antistatic structure Manufactured in Switzerland ds: dsc: Scope of delivery SANDING BELT 13X451 MM, G60, RW, UNPRESSED, SPAN, B&D POWERFILE (3) kts: sanding belt 13x451 mm grit 60 for wood for Black&Decker electric files (3 pcs) kpn: 2609256238 kpn_dash: kpn_clear: 2609256238 bkpn: BOSCH 2609256238 bkpn_clear: BOSCH 2609256238 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Sanding belt | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch surface treatment / Bosch sanding, sharpening, polishing and deburring / Bosch sanding belt sr_no_br_cl_ns: 2609256238 sr_ns: BOSCH2609256238
r: 02802992 p: 4.92 pid: 22077 b: BOSCH q: 0 st: lt: 8 ean: 3165140388405 sr: BOSCH 2609256237 sr_no_br: 2609256237 sr_no_br_cl: 2609256237 sr_cl: BOSCH2609256237 sr_dash: sold: 19.68 p_range: none type: standard act: 1 avo: av: Width 13 mm Length 451 mm Grit size 40 n: BOSCH 2609256237 sanding belt 13x451 mm grit 40 for wood for Black&Decker electric files (3 pcs) cn: SANDING BELT cn2: SANDING BELT cn_clear: SANDINGBELT d: Product description: SANDING/POLISHING MP (SANDING BELT 13X451 MM, G40, RW, UNPERF., SPAN, B&D POWERFILE (3)) Powerful and fast material removal in tight spaces Very sturdy and durable sanding belts with high-quality belt joints for perfect surfaces With high-precision, clean belt run for the best surface quality and dust-free sanding belts, workpieces and power tools due to the anti-static structure Advantages: SANDING/POLISHING MP (SANDING BELT 13X451 MM, G40, RW, UNPERF. , SPAN, B&D POWERFILE (3)) Very sturdy and durable sanding belts with high-quality belt joints for perfect surfaces With high-precision, clean belt run for the best surface quality and dust-free sanding belts, workpieces and power tools due to the antistatic structure Manufactured in Switzerland ds: dsc: Scope of delivery: SANDING BELT 13X451 MM, G40, RW, UNPRESSED, SPAN, B&D POWERFILE (3) kts: sanding belt 13x451 mm grit 40 for wood for Black&Decker electric files (3 pcs) kpn: 2609256237 kpn_dash: kpn_clear: 2609256237 bkpn: BOSCH 2609256237 bkpn_clear: BOSCH 2609256237 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Sanding belt | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch surface treatment / Bosch sanding, sharpening, polishing and deburring / Bosch sanding belt sr_no_br_cl_ns: 2609256237 sr_ns: BOSCH2609256237
r: 02790024 p: 3.55 pid: 134299 b: BOSCH q: 0 st: lt: 8 ean: 3165140858762 sr: BOSCH 2608577049 sr_no_br: 2608577049 sr_no_br_cl: 2608577049 sr_cl: BOSCH2608577049 sr_dash: sold: 17.75 p_range: none act: 1 avo: av: Diameter 3,2 mm Cutting length 36 mm Drill bit type Metal drill bit Overall length 75 mm Shank size 1/4 inch Shank type Hex Material (drill bit) HSS n: BOSCH 2608577049 twist drill bit HSS hex shank 3.2 x 36 x 75 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Spiral drill bit HSS hex shank 3.2 x 36 x 75 mm Very robust with impact screwdrivers Extremely robust Impact Control HSS spiral drill for drilling in metal, especially with impact screwdrivers The super-strong body is extremely robust Advantages Extremely robust - The very robust Impact Control HSS spiral drill bit is suitable for drilling in metal, especially with impact screwdrivers. The very strong body is exceptionally robust. The spiral drill is precision ground from solid metal and fitted with an oxide-coated groove. This gives the drill an excellent surface quality for low-wear drilling into materials. Suitable for alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non-ferrous metals, metal sheets and plastics. This drill bit is suitable for drive systems for 1/4-inch hex shafts, for universal use with drill/screwdrivers, impact screwdrivers and drill stands. Hex shank for maximum power transfer in standard three-claw drill chucks and drill/screwdriver holders. ds: dsc: kts: twist drill bit HSS hex shank 3.2 x 36 x 75 mm kpn: 2608577049 kpn_dash: kpn_clear: 2608577049 bkpn: BOSCH 2608577049 bkpn_clear: BOSCH 2608577049 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608577049 sr_ns: BOSCH2608577049
r: 02224447 p: 17.53 pid: 130770 b: BOSCH q: 0 st: lt: 8 ean: 3165140085151 sr: BOSCH 2609200199 sr_no_br: 2609200199 sr_no_br_cl: 2609200199 sr_cl: BOSCH2609200199 sr_dash: sold: 17.53 p_range: none type: standard act: 1 avo: av: Diameter 6 mm Drill bit type Multi-purpose drill bit Overall length 85 mm Shank size 6 mm Shank type Cylindrical Material (drill bit) HSS Cutting length 85 mm n: BOSCH 2609200199 speed drill HSS 6 x 85 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Speed drill HSS 6 x 85 mm Drilling and milling with one tool HSS router bit with finishing cut enables both drilling and milling with one tool Front spiral drill turns into milling cutter with chip breaker Advantages Drilling and milling - The HSS router bit with finishing cut allows you to both drill and mill with one tool. The drill starts with a spiral drill on the front and then turns into a milling cutter with chip breakers. The drill bit is suitable for non-ferrous metals, steel, plastics and wood. The drill has a cylindrical shank intended for use with drill/screw machines and drill stands with speeds of 1. 000 to 2. 000 min-1. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: Scope of delivery Plastic packaging, bag, with Euro punching kts: speed drill HSS 6 x 85 mm kpn: 2609200199 kpn_dash: kpn_clear: 2609200199 bkpn: BOSCH 2609200199 bkpn_clear: BOSCH 2609200199 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2609200199 sr_ns: BOSCH2609200199
r: 01049236 p: 16.51 pid: 131562 b: BOSCH q: 0 st: lt: 8 ean: 3165140028400 sr: BOSCH 1618596271 sr_no_br: 1618596271 sr_no_br_cl: 1618596271 sr_cl: BOSCH1618596271 sr_dash: sold: 16.51 p_range: none act: 1 avo: av: Diameter 14 mm Cutting length 250 mm Drill bit type Hammer drill bit Overall length 315 mm Shank type SDS-plus Material (drill bit) Carbide tip n: BOSCH 1618596271 hammer drill SDS-Plus-5, 14 x 250 x 315 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Hammer drill bit SDS-Plus-5, 14 x 250 x 315 mm Easy drilling in concrete SDS-Plus-5 drill bit drills effortlessly Serrated carbide plate for effortless drilling without jamming Advantages Effortless drilling in concrete - The SDS plus-5 drill bit drills effortlessly. The carbide drill has spirals and notches that make it easier for the drill to penetrate the concrete and prevent jamming. The drill bit is held in place by the Activeteq centring ring so it cannot slip and the hole is not drilled too large. The AWB brazing and hardening technology also increases robustness during drilling, making drilling less stressful for the user. The drill bit is suitable for drilling in masonry and concrete. This drill fits drill hammers with an SDS plus holder. The wear indicator shows whether the diameter of the hole is within tolerance, which is necessary to accurately position the metal anchor. The quality mark of the PGM Masonry Drill Bit Association Board on this drill bit guarantees that it is within close tolerances, drills very accurately and does not slip while drilling fixing holes. The drill bit is 'Made in Germany'. Fits all SDS plus rotary hammers. ds: dsc: kts: hammer drill SDS-Plus-5, 14 x 250 x 315 mm kpn: 1618596271 kpn_dash: kpn_clear: 1618596271 bkpn: BOSCH 1618596271 bkpn_clear: BOSCH 1618596271 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 1618596271 sr_ns: BOSCH1618596271
r: 01049345 p: 15.75 pid: 128978 b: BOSCH q: 0 st: lt: 8 ean: 3165140087490 sr: BOSCH 2608584109 sr_no_br: 2608584109 sr_no_br_cl: 2608584109 sr_cl: BOSCH2608584109 sr_dash: sold: 15.75 p_range: none act: 1 avo: av: Diameter (hole saw) 32 mm; 1 1/4 inch n: BOSCH 2608584109 HSS bi-metal hole saw for standard adapter (32 mm, 1 1/4") cn: HOLE SAW cn2: HOLE SAW cn_clear: HOLESAW d: Product description HSS Bi-Metal hole saw for standard adapter 32 mm Effortless cutting The bi-metal hole saw ensures effortless cuts in various materials The tooth configuration (Vario-serrations) is ideal for gliding through the material and delivering smooth cuts Advantages Effortless cutting - The bi-metal hole saw ensures effortless cutting in different materials. The tooth configuration (Vario toothing) is ideal for gliding through the material and delivering smooth cuts. Made of HSS (high speed steel) bi-metal with 8% cobalt alloy, this hole saw has higher heat resistance and less risk of tooth breakage with prolonged cutting. Use this hole saw for working in wood, metal and plastic The bi-metal hole saw fits all standard adapters. Fits standard threaded adapter. ds: dsc: Scope of delivery Paper / cardboard / corrugated board - packaging, sleeve, with Euro die-cut kts: HSS bi-metal hole saw for standard adapter (32 mm, 1 1/4") kpn: 2608584109 kpn_dash: kpn_clear: 2608584109 bkpn: BOSCH 2608584109 bkpn_clear: BOSCH 2608584109 c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Hole saw | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch sawing and cutting / Bosch hole saw sr_no_br_cl_ns: 2608584109 sr_ns: BOSCH2608584109
r: 02221313 p: 14.76 pid: 131405 b: BOSCH q: 0 st: lt: 8 ean: 3165140087469 sr: BOSCH 2608584106 sr_no_br: 2608584106 sr_no_br_cl: 2608584106 sr_cl: BOSCH2608584106 sr_dash: sold: 14.76 p_range: none act: 1 avo: av: Diameter (hole saw) 27 mm; 1 1/16 inch n: BOSCH 2608584106 HSS bi-metal hole saw for standard adapter (27 mm, 1 1/16") cn: HOLE SAW cn2: HOLE SAW cn_clear: HOLESAW d: Product description HSS Bi-Metal hole saw for standard adapter 27 mm Effortless cutting The bi-metal hole saw ensures effortless cuts in various materials The tooth configuration (Vario-serrations) is ideal for gliding through the material and delivering smooth cuts Advantages Effortless cutting - The bi-metal hole saw ensures effortless cutting in different materials. The tooth configuration (Vario toothing) is ideal for gliding through the material and delivering smooth cuts. Made of HSS (high speed steel) bi-metal with 8% cobalt alloy, this hole saw has higher heat resistance and less risk of tooth breakage with prolonged cutting. Use this hole saw for working in wood, metal and plastic The bi-metal hole saw fits all standard adapters. Fits standard threaded adapter. ds: dsc: Scope of delivery Paper / cardboard / corrugated board - packaging, sleeve, with Euro die-cut kts: HSS bi-metal hole saw for standard adapter (27 mm, 1 1/16") kpn: 2608584106 kpn_dash: kpn_clear: 2608584106 bkpn: BOSCH 2608584106 bkpn_clear: BOSCH 2608584106 c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Hole saw | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch sawing and cutting / Bosch hole saw sr_no_br_cl_ns: 2608584106 sr_ns: BOSCH2608584106
r: 01049065 p: 14.65 pid: 128760 b: BOSCH q: 0 st: lt: 8 ean: 3165140060875 sr: BOSCH 2608596711 sr_no_br: 2608596711 sr_no_br_cl: 2608596711 sr_cl: BOSCH2608596711 sr_dash: sold: 14.65 p_range: none type: standard act: 1 avo: av: Diameter 6 mm Drill bit type Metal drill bit Overall length 93 mm Shank size 6 mm Shank type Cylindrical Material (drill bit) HSS Surface treatment (drill bit) TiN Standard DIN 338 Cutting length 57 mm n: BOSCH 2608596711 metal drill bit HSS-TiN, DIN 338, 6 x 57 x 93 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Metal drill bit HSS-TiN, DIN 338, 6 x 57 x 93 mm Maximum service life HSS spiral drill bit TiN-coated offers longer service life Titanium nitride coating ensures very low friction and minimal wear Advantages Maximum service life - The HSS spiral drill bit TiN-coated offers maximum service life when drilling in metal. When using the right cooling system, the drill bit has very low friction and minimal wear thanks to the TiN-coating. Thanks to the high surface quality of this ground spiral drill made of HSS (High-Speed Steel), the drill bit can be used for long periods of time. Suitable for alloyed and unalloyed steel, malleable cast iron, sintered iron, new silver, copper, bronze and hard plastics, such as Plexiglas. This drill has a cylindrical shank (drill and shank have the same diameter) and is intended for use in drill stands and drill/screw machines. The HSS spiral drill bit TiN-coated is produced in accordance with DIN 338. The drill bit is type N (spiral angle) with a tip of 135 degrees and a diameter tolerance of h8. The pointed split point ensures an active cutting action and perfect centring without expiring. Do not use in aluminium and only with a coolant. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: metal drill bit HSS-TiN, DIN 338, 6 x 57 x 93 mm kpn: 2608596711 kpn_dash: kpn_clear: 2608596711 bkpn: BOSCH 2608596711 bkpn_clear: BOSCH 2608596711 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608596711 sr_ns: BOSCH2608596711
r: 03059895 p: 2.92 pid: 132758 b: BOSCH q: 0 st: lt: 8 ean: 6949509231413 sr: BOSCH 2608577526 sr_no_br: 2608577526 sr_no_br_cl: 2608577526 sr_cl: BOSCH2608577526 sr_dash: sold: 14.6 p_range: none act: 1 avo: av: Diameter 5 mm Cutting length 52 mm Drill bit type Metal drill bit Overall length 91 mm Shank size 1/4 inch Shank type Hex Material (drill bit) HSS Standard DIN 338 n: BOSCH 2608577526 metal drill bit HSS PointTeQ 5.0mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Metal drill bit HSS PointTeQ 5.0mm Fast drilling in metal The HSS PointTeQ twist drill bit with hex shank is ideal for fast drilling in metal When drilling at high speeds, there is less heat build-up and wear on the drill bit. The PointTeQ tip ensures lasting sharpness and durability Advantages Fast drilling in metal - The HSS PointTeQ spiral drill bit with hex shank drills quickly in metal. This drill bit is designed for high-speed drilling, which minimises heating and wear on the drill bit. The PointTeQ design of the tip ensures lasting sharpness and high durability. The self-centring tip prevents drift and enables quick and easy drill start. The spiral with a black oxide coating ensures fast chip removal. The drill's hexagonal shank ensures stability and firm locking of the drill bit in the chuck, making it extra reliable. The shank strengthens the body of the drill bit and reduces the risk of breakage when drilling with a diameter smaller than 6 mm. The drill bit is compatible with 1/4-inch hex shank systems for universal use with impact screwdrivers, drill/drivers and drill stands. The four-surface tip of the HSS PointTeQ spiral drill bit enables active drilling and perfect centring. Type N (spiral angle) drill bit with 135° tip in accordance with DIN 338. Hexagonal shank for maximum power transfer in standard three-claw drill chucks and drill/screw machine holders. ds: dsc: kts: metal drill bit HSS PointTeQ 5.0mm kpn: 2608577526 kpn_dash: kpn_clear: 2608577526 bkpn: BOSCH 2608577526 bkpn_clear: BOSCH 2608577526 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608577526 sr_ns: BOSCH2608577526
r: 02894458 p: 1.42 pid: 132493 b: BOSCH q: 0 st: lt: 8 ean: 3165140906630 sr: BOSCH 2608577154 sr_no_br: 2608577154 sr_no_br_cl: 2608577154 sr_cl: BOSCH2608577154 sr_dash: sold: 14.2 p_range: none act: 1 avo: av: Diameter 1,5 mm Material (drill bit) HSS Cutting length 18 mm Standard DIN 338 Quantity per blister 2 Shank type Cylindrical Shank size 1,5 mm Overall length 40 mm Drill bit type Metal drill bit n: BOSCH 2608577154 twist drill bit HSS PointTeQ 1.5 mm (2 pcs) cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Spiral drill bit HSS PointTeQ 1.5 mm 2x Fast drilling in metal The HSS spiral drill PointTeQ offers fast drilling in metal thanks to the PointTeQ tip The self-centring tip prevents drift, enabling fast and easy drilling starts Advantages Fast drilling in metal - The HSS spiral drill PointTeQ offers fast drilling in metal thanks to the PointTeQ tip. Fast and easy drill start thanks to the self-centring tip that prevents drift. Higher drilling speed reduces the risk of heating and wear. The PointTeQ tip stays sharp. This guarantees excellent durability. The drill bit is suitable for drilling through-holes and centring holes in alloyed and unalloyed steel, non-ferrous metals, cast iron and plastic. Has a cylindrical shank and is intended for use in drill stands and drill/screw machines. The risk of breaking is low, especially for drill bits with a diameter of less than 6 mm, as the drill bit is built very elastically. The black oxide-coated spiral allows fast chip removal. The HSS PointTeQ spiral drill bit is manufactured in accordance with DIN 338. The drill bit is type N (spiral angle) with tip of 135 degrees. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: twist drill bit HSS PointTeQ 1.5 mm (2 pcs) kpn: 2608577154 kpn_dash: kpn_clear: 2608577154 bkpn: BOSCH 2608577154 bkpn_clear: BOSCH 2608577154 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608577154 sr_ns: BOSCH2608577154
r: 02896933 p: 14.02 pid: 132390 b: BOSCH q: 0 st: lt: 8 ean: 3165140784993 sr: BOSCH 2608662354 sr_no_br: 2608662354 sr_no_br_cl: 2608662354 sr_cl: BOSCH2608662354 sr_dash: sold: 14.02 p_range: none act: 1 avo: av: Length (saw blade) 65 mm Saw blade type Plunge-cut blade n: BOSCH AII 65 BSPC HCS Starlock saw blade for hardwood, Curved-Tec 65 x 40 mm - 2608662354 cn: SAW BLADE FOR OSCILLATING MULTI-TOOL cn2: SAW BLADE FOR OSCILLATING MULTI-TOOL cn_clear: SAWBLADEFOROSCILLATINGMULTITOOL d: Product description Starlock AII 65 BSPC HCS, Hardwood, Curved-Tec 65 x 40 Long service life for wide and clean cuts in hardwood The Starlock AII 65 BSPC saw blade makes wide and clean cuts in hardwood The 3-dimensional Japanese toothing minimises heat generation to cut without splinters Advantages Wide and clean cuts - The Starlock AII 65 BSPC saw blade makes wide and clean cuts in hardwood. The 3-dimensional Japanese toothing of sharp ground teeth is ideal for cutting in hardwood. These teeth minimise heat build-up. This prevents splinters and burning during sawing. The flat design reduces swabbing and enables controlled cutting due to direct power transfer. This product is intended for plunge-cutting in hardwood or wood planks and cutting in wood panels. Use this product for all Starlock, Starlock Plus and Starlock Max power tools and normal multitools. The rounded cutting edge (Curved-Tec) of the saw blade enables precise and smooth plunge cuts. The Starlock Snap-In insert system allows saw blades to be removed and changed within 3 seconds without having to touch the saw blade. The insert system offers the highest power transfer thanks to a 3-dimensional close connection between the machine and the accessory. Starlock connection for optimum power transfer and easy saw blade changes within three seconds. ds: dsc: kts: Starlock saw blade for hardwood, Curved-Tec 65 x 40 mm kpn: AII 65 BSPC HCS kpn_dash: kpn_clear: AII65BSPCHCS bkpn: BOSCH AII 65 BSPC HCS bkpn_clear: BOSCH AII65BSPCHCS c_path: Home / Tools / Machining tools / Cutting tools / Sawing and cutting / Saw blade for oscillating multi-tool | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch sawing and cutting / Bosch saw blade for oscillating multi-tool sr_no_br_cl_ns: 2608662354 sr_ns: BOSCH2608662354
r: 02220898 p: 13.89 pid: 132703 b: BOSCH q: 0 st: lt: 8 ean: 3165140198875 sr: BOSCH 2607010516 sr_no_br: 2607010516 sr_no_br_cl: 2607010516 sr_cl: BOSCH2607010516 sr_dash: sold: 13.89 p_range: none act: 1 avo: av: Quantity per blister 3 n: BOSCH 2607010516 jigsaw blade set universal 3-piece cn: JIGSAW BLADE SET cn2: JIGSAW BLADE SET cn_clear: JIGSAWBLADESET d: Product description 3-piece jigsaw blade set U123 XF; U234 X; U345 XF Powerful and fast cuts in thick and thin material The 3-piece Progressor jigsaw blade set offers powerful and fast cuts in thick and thin material Progressor saw blades for universal use Advantages Thick and thin material - The 3-piece Progressor jigsaw blade set offers powerful and fast cuts in thick and thin material. The Progressor saw blades are for universal use and offer fast cuts in wood, plastic and metals of varying density. They fit jigsaws with a universal shaft system. Fits all jigsaws with a U-shank. ds: dsc: Scope of delivery Paper / cardboard / corrugated board - packaging, folding carton, with Euro die-cutting kts: jigsaw blade set universal 3-piece kpn: 2607010516 kpn_dash: kpn_clear: 2607010516 bkpn: BOSCH 2607010516 bkpn_clear: BOSCH 2607010516 c_path: Home / Tools / Machining tools / Sets and kits / Sawing and cutting / Jigsaw blade set | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch sets and kits / Bosch sawing and cutting / Bosch jigsaw blade set sr_no_br_cl_ns: 2607010516 sr_ns: BOSCH2607010516
