Individual Bosch spanners: pin spanners, VDE spanners and spare chuck keys
Individual Bosch spanners let you complete a run of sizes, replace a lost spanner or operate a machine: pin spanners, open-end spanners, adjustable spanners, VDE spanners and chuck keys. They sit within Bosch spanners.
Pin spanners loosen grinding discs, saw blades or flanges. They come straight and curved, with adjustable ranges such as 115 to 150 mm and 180 to 230 mm. Choose by the disc size of your machine. A spare chuck key exists per type, such as S2 and S3: check which type is fitted to your drill.
For nuts and bolts, choose between fixed and adjustable spanners. A 14 or 17 mm open-end spanner fits that one size exactly. A 150 or 200 mm adjustable spanner takes several sizes and is handy when you travel light.
For electrical installations, take a VDE spanner, available in 8, 10, 13 and 17 mm. If you need a whole run of sizes at once, a set from Bosch spanner sets works out better value than single spanners.
- Diameter (pin): 8 mm
- Length: 50 mm
- Width across flats 1: 17 mm
- Non-sparking: No
- VDE approved: No
- Length: 250 mm
- Max. width across flats: 34 mm
- VDE approved: No
- Diameter (pin): 6 mm
- Length: 40 mm
- Width across flats 1: 17 mm
- Non-sparking: No
- VDE approved: Yes
- Width across flats 1: 13 mm
- Width across flats 2: NA
- Non-sparking: No
- Width across flats 1: 10 mm
- Width across flats 2: NA
- Non-sparking: No
- Width across flats 1: 8 mm
- Width across flats 2: NA
- Non-sparking: No
- Length: 200 mm
- Max. width across flats: 32 mm
- VDE approved: No
- Length: 150 mm
- Max. width across flats: 24 mm
- VDE approved: No
- Width across flats 1: 14 mm
- Non-sparking: No
- VDE approved: No
- Diameter (pin): 6 mm
- Length: 30 mm
- Diameter (pin): 10 mm
- Diameter (pin): 4 mm
- Length: 60 mm
- Diameter (pin): 13 mm