r: 02220299 p: 11.41 pid: 129104 b: BOSCH q: 0 st: lt: 8 ean: 3165140027885 sr: BOSCH 1618596180 sr_no_br: 1618596180 sr_no_br_cl: 1618596180 sr_cl: BOSCH1618596180 sr_dash: sold: 0 p_range: none act: 1 avo: av: Diameter 11 mm Cutting length 200 mm Drill bit type Hammer drill bit Overall length 265 mm Shank type SDS-plus Material (drill bit) Carbide tip n: BOSCH 1618596180 hammer drill SDS-Plus-5, 11 x 200 x 265 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Hammer drill bit SDS-Plus-5, 11 x 200 x 265 mm Easy drilling in concrete SDS-Plus-5 drill bit drills effortlessly Serrated carbide plate for effortless drilling without jamming Advantages Effortless drilling in concrete - The SDS plus-5 drill bit drills effortlessly. The carbide drill has spirals and notches that make it easier for the drill to penetrate the concrete and prevent jamming. The drill bit is held in place by the Activeteq centring ring so it cannot slip and the hole is not drilled too large. The AWB brazing and hardening technology also increases robustness during drilling, making drilling less stressful for the user. The drill bit is suitable for drilling in masonry and concrete. This drill fits drill hammers with an SDS plus holder. The wear indicator shows whether the diameter of the hole is within tolerance, which is necessary to accurately position the metal anchor. The quality mark of the PGM Masonry Drill Bit Association Board on this drill bit guarantees that it is within close tolerances, drills very accurately and does not slip while drilling fixing holes. The drill bit is 'Made in Germany'. Fits all SDS plus rotary hammers. ds: dsc: kts: hammer drill SDS-Plus-5, 11 x 200 x 265 mm kpn: 1618596180 kpn_dash: kpn_clear: 1618596180 bkpn: BOSCH 1618596180 bkpn_clear: BOSCH 1618596180 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 1618596180 sr_ns: BOSCH1618596180
r: 02790649 p: 11.29 pid: 136864 b: BOSCH q: 0 st: lt: 8 ean: 3165140656764 sr: BOSCH 2608587834 sr_no_br: 2608587834 sr_no_br_cl: 2608587834 sr_cl: BOSCH2608587834 sr_dash: sold: 0 p_range: none act: 1 avo: av: Diameter 7 mm Cutting length 200 mm Drill bit type Hammer drill bit Overall length 265 mm Shank type SDS-plus Material (drill bit) Carbide tip n: BOSCH 2608587834 hammer drill SDS-Plus-5, 7 x 200 x 265 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Hammer drill bit SDS-Plus-5, 7 x 200 x 265 mm Easy drilling in concrete SDS-Plus-5 drill bit drills effortlessly Serrated carbide plate for effortless drilling without jamming Advantages Effortless drilling in concrete - The SDS plus-5 drill bit drills effortlessly. The carbide drill has spirals and notches that make it easier for the drill to penetrate the concrete and prevent jamming. The drill bit is held in place by the Activeteq centring ring so it cannot slip and the hole is not drilled too large. The AWB brazing and hardening technology also increases robustness during drilling, making drilling less stressful for the user. The drill bit is suitable for drilling in masonry and concrete. This drill fits drill hammers with an SDS plus holder. The wear indicator shows whether the diameter of the hole is within tolerance, which is necessary to accurately position the metal anchor. The quality mark of the PGM Masonry Drill Bit Association Board on this drill bit guarantees that it is within close tolerances, drills very accurately and does not slip while drilling fixing holes. The drill bit is 'Made in Germany'. Fits all SDS plus rotary hammers. ds: dsc: kts: hammer drill SDS-Plus-5, 7 x 200 x 265 mm kpn: 2608587834 kpn_dash: kpn_clear: 2608587834 bkpn: BOSCH 2608587834 bkpn_clear: BOSCH 2608587834 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608587834 sr_ns: BOSCH2608587834
r: 01049063 p: 10.97 pid: 128872 b: BOSCH q: 0 st: lt: 8 ean: 3165140060851 sr: BOSCH 2608596701 sr_no_br: 2608596701 sr_no_br_cl: 2608596701 sr_cl: BOSCH2608596701 sr_dash: sold: 0 p_range: none act: 1 avo: av: Diameter 5 mm Drill bit type Metal drill bit Overall length 86 mm Shank size 5 mm Shank type Cylindrical Material (drill bit) HSS Surface treatment (drill bit) TiN Standard DIN 338 Cutting length 52 mm n: BOSCH 2608596701 metal drill bit HSS-TiN, DIN 338, 5 x 52 x 86 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Metal drill bit HSS-TiN, DIN 338, 5 x 52 x 86 mm Maximum service life HSS spiral drill bit TiN-coated offers longer service life Titanium nitride coating ensures very low friction and minimal wear Advantages Maximum service life - The HSS spiral drill bit TiN-coated offers maximum service life when drilling in metal. When using the right cooling system, the drill bit has very low friction and minimal wear thanks to the TiN-coating. Thanks to the high surface quality of this ground spiral drill made of HSS (High-Speed Steel), the drill bit can be used for long periods of time. Suitable for alloyed and unalloyed steel, malleable cast iron, sintered iron, new silver, copper, bronze and hard plastics, such as Plexiglas. This drill has a cylindrical shank (drill and shank have the same diameter) and is intended for use in drill stands and drill/screw machines. The HSS spiral drill bit TiN-coated is produced in accordance with DIN 338. The drill bit is type N (spiral angle) with a tip of 135 degrees and a diameter tolerance of h8. The pointed split point ensures an active cutting action and perfect centring without expiring. Do not use in aluminium and only with a coolant. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: metal drill bit HSS-TiN, DIN 338, 5 x 52 x 86 mm kpn: 2608596701 kpn_dash: kpn_clear: 2608596701 bkpn: BOSCH 2608596701 bkpn_clear: BOSCH 2608596701 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608596701 sr_ns: BOSCH2608596701
r: 08052044 p: 10.95 pid: 133056 b: BOSCH q: 0 st: lt: 8 ean: 4059952539201 sr: BOSCH 2608900627 sr_no_br: 2608900627 sr_no_br_cl: 2608900627 sr_cl: BOSCH2608900627 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_196 act: 1 avo: av: Diameter 10 mm Drill bit type Multi-purpose drill bit Overall length 150 mm Shank size 10 mm Shank type Cylindrical Material (drill bit) Carbide tip Cutting length 90 mm Product Range Bosch Expert n: BOSCH 2608900627 Expert universal drill CYL-9 MultiConstruction 10x90x150mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description EXPERT Universal drill bit CYL-9 MultiConstruction 10x90x150 Up to 5x more accurate than Bosch's CYL-3 drill bit Accurate drilling is easy with the patented Bosch Centering Geometry. Cylindrical shank compatible with three-claw drill chucks. Advantages Up to 5x more accurate than Bosch's CYL-3 drill bit - On a modern construction site, you work with many different materials and you never know what's next to drill. Finding the right drill bit can be difficult and time-consuming, unless you have the EXPERT MultiConstruction drill bit on hand. This extremely versatile drill bit can accurately drill into hard materials like granite without slipping thanks to its sharp tip and advanced geometric design. Made of optimised carbide by our fine grinding manufacturing techniques. The drill can also handle concrete, brick, soft tiles, wood and metal. Always a professional result, regardless of the material. The Bosch EXPERT CYL-9 MultiConstruction cylindrical drill bit is the only drill bit that should always be in your toolbox: you will never lose time searching for the right drill bit again. Cylindrical shank compatible with three-claw drill chucks. Maximum precision when drilling in various materialsThis extremely versatile drill bit can accurately drill into hard materials such as tiles and granite without slipping thanks to its sharp tip and advanced geometric design. Made of optimised carbide by our fine grinding manufacturing techniques. The drill can also handle concrete, brick, wood and metal. Always a professional result regardless of the material. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: Expert universal drill CYL-9 MultiConstruction 10x90x150mm kpn: 2608900627 kpn_dash: kpn_clear: 2608900627 bkpn: BOSCH 2608900627 bkpn_clear: BOSCH 2608900627 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit | Home / Our brands / Bosch / Bosch Ranges / Bosch expert sr_no_br_cl_ns: 2608900627 sr_ns: BOSCH2608900627
r: 01049062 p: 10.93 pid: 128867 b: BOSCH q: 0 st: lt: 8 ean: 3165140060844 sr: BOSCH 2608596696 sr_no_br: 2608596696 sr_no_br_cl: 2608596696 sr_cl: BOSCH2608596696 sr_dash: sold: 0 p_range: none act: 1 avo: av: Diameter 4,5 mm Drill bit type Metal drill bit Overall length 80 mm Shank size 4,5 mm Shank type Cylindrical Material (drill bit) HSS Surface treatment (drill bit) TiN Standard DIN 338 Cutting length 47 mm n: BOSCH 2608596696 metal drill bit HSS-TiN, DIN 338, 4.5 x 47 x 80 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Metal drill bit HSS-TiN, DIN 338, 4.5 x 47 x 80 mm Maximum service life HSS spiral drill bit TiN-coated offers longer service life Titanium nitride coating ensures very low friction and minimal wear Advantages Maximum service life - The HSS spiral drill bit TiN-coated offers maximum service life when drilling in metal. When using the right cooling system, the drill bit has very low friction and minimal wear thanks to the TiN-coating. Thanks to the high surface quality of this ground spiral drill made of HSS (High-Speed Steel), the drill bit can be used for long periods of time. Suitable for alloyed and unalloyed steel, malleable cast iron, sintered iron, new silver, copper, bronze and hard plastics, such as Plexiglas. This drill has a cylindrical shank (drill and shank have the same diameter) and is intended for use in drill stands and drill/screw machines. The HSS spiral drill bit TiN-coated is produced in accordance with DIN 338. The drill bit is type N (spiral angle) with a tip of 135 degrees and a diameter tolerance of h8. The pointed split point ensures an active cutting action and perfect centring without expiring. Do not use in aluminium and only with a coolant. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: metal drill bit HSS-TiN, DIN 338, 4.5 x 47 x 80 mm kpn: 2608596696 kpn_dash: kpn_clear: 2608596696 bkpn: BOSCH 2608596696 bkpn_clear: BOSCH 2608596696 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608596696 sr_ns: BOSCH2608596696
r: 08051790 p: 10.9 pid: 139473 b: BOSCH q: 0 st: lt: 8 ean: 4059952534022 sr: BOSCH 2608900328 sr_no_br: 2608900328 sr_no_br_cl: 2608900328 sr_cl: BOSCH2608900328 sr_dash: sold: 0 p_range: KLIUM_PRODUCT_RANGE_196 act: 1 avo: av: Diameter 36 mm Drill bit type Wood drill bit Overall length 152 mm Shank size 1/4 inch Shank type Hex Material (drill bit) Chrome-vanadium steel Product Range Bosch Expert n: BOSCH 2608900328 Expert speed drill Self Cut Speed, hexagonal shank 36 x 152 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description EXPERT Speed Drill Self Cut Speed, hex shank 36 x 152 mm Up to 3x faster than a 2609255269 speed drill bit from Bosch Fast drilling is easy with Bosch Tip Technology 1/4-inch hexagonal shank for use with three-claw drill chucks and hexagonal drill/screwdriver chucks. Advantages Up to 3x faster than a 2609255269 speed drill bit from Bosch - Speed drills are a great accessory for electricians and other installers and builders. What if they could be even faster and more efficient? With Bosch Tip Technology, it is possible. The EXPERT Self Cut Speed features the most advanced designs for speed drills, making it easy to use and very practical for professionals who need to do tough jobs. The patented Bosch screw tip brings the speed drill into wood with even the lightest pressure. This is especially useful when you need to drill upside down or into tight recesses. The advanced shovel design provides extra speed. The Bosch EXPERT Self Cut Speed drill offers efficiency and convenience to professionals who need to drill holes for cabling, pipes and other hardware installations. The drill also works perfectly in all types of softwood. 1/4-inch hex shank for use with three-claw drill chucks and hex drill/screw machine chucks. Drilling in wood at maximum speedThe Expert SelfCut Speed features the most advanced designs for speed drilling, making it easy to use and very practical for professionals with tough jobs. The patented Bosch screw tip takes the speed drill into wood with even the lightest pressure. This is especially useful when you need to drill upside down or into tight recesses. The advanced shovel design provides extra speed. Hex shank for maximum power transfer in standard three-claw and 6-sided drill chuck ds: dsc: kts: Expert speed drill Self Cut Speed, hexagonal shank 36 x 152 mm kpn: 2608900328 kpn_dash: kpn_clear: 2608900328 bkpn: BOSCH 2608900328 bkpn_clear: BOSCH 2608900328 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit | Home / Our brands / Bosch / Bosch Ranges / Bosch expert sr_no_br_cl_ns: 2608900328 sr_ns: BOSCH2608900328
r: 02221963 p: 10.82 pid: 133208 b: BOSCH q: 0 st: lt: 8 ean: 3165140046114 sr: BOSCH 2608596157 sr_no_br: 2608596157 sr_no_br_cl: 2608596157 sr_cl: BOSCH2608596157 sr_dash: sold: 0 p_range: none act: 1 avo: av: Diameter 8 mm Overall length 120 mm Quantity per blister 1 n: BOSCH 2608596157 centre drill for shank for hexagon adapter SDS-Plus, 8 x 120 mm cn: PILOT DRILL cn2: PILOT DRILL cn_clear: PILOTDRILL d: Product description Centre drill for take-up shaft for hexagon adapter SDS-Plus, 8 x 120 mm Centre drill bit Centring drill bit Advantages Hex shank for maximum power transfer in standard three-claw drill chucks and drill/screwdriver holders. ds: dsc: kts: centre drill for shank for hexagon adapter SDS-Plus, 8 x 120 mm kpn: 2608596157 kpn_dash: kpn_clear: 2608596157 bkpn: BOSCH 2608596157 bkpn_clear: BOSCH 2608596157 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Pilot drill | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch pilot drill sr_no_br_cl_ns: 2608596157 sr_ns: BOSCH2608596157
r: 02220301 p: 10.77 pid: 129150 b: BOSCH q: 0 st: lt: 8 ean: 3165140027915 sr: BOSCH 1618596183 sr_no_br: 1618596183 sr_no_br_cl: 1618596183 sr_cl: BOSCH1618596183 sr_dash: sold: 0 p_range: none act: 1 avo: av: Diameter 13 mm Cutting length 100 mm Drill bit type Hammer drill bit Overall length 165 mm Shank type SDS-plus Material (drill bit) Carbide tip n: BOSCH 1618596183 hammer drill SDS-Plus-5, 13 x 100 x 165 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Hammer drill bit SDS-Plus-5, 13 x 100 x 165 mm Easy drilling in concrete SDS-Plus-5 drill bit drills effortlessly Serrated carbide plate for effortless drilling without jamming Advantages Effortless drilling in concrete - The SDS plus-5 drill bit drills effortlessly. The carbide drill has spirals and notches that make it easier for the drill to penetrate the concrete and prevent jamming. The drill bit is held in place by the Activeteq centring ring so it cannot slip and the hole is not drilled too large. The AWB brazing and hardening technology also increases robustness during drilling, making drilling less stressful for the user. The drill bit is suitable for drilling in masonry and concrete. This drill fits drill hammers with an SDS plus holder. The wear indicator shows whether the diameter of the hole is within tolerance, which is necessary to accurately position the metal anchor. The quality mark of the PGM Masonry Drill Bit Association Board on this drill bit guarantees that it is within close tolerances, drills very accurately and does not slip while drilling fixing holes. The drill bit is 'Made in Germany'. Fits all SDS plus rotary hammers. ds: dsc: kts: hammer drill SDS-Plus-5, 13 x 100 x 165 mm kpn: 1618596183 kpn_dash: kpn_clear: 1618596183 bkpn: BOSCH 1618596183 bkpn_clear: BOSCH 1618596183 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 1618596183 sr_ns: BOSCH1618596183
r: 02790044 p: 10.65 pid: 134104 b: BOSCH q: 0 st: lt: 8 ean: 3165140858908 sr: BOSCH 2608577062 sr_no_br: 2608577062 sr_no_br_cl: 2608577062 sr_cl: BOSCH2608577062 sr_dash: sold: 0 p_range: none act: 1 avo: av: Diameter 9 mm Cutting length 81 mm Drill bit type Metal drill bit Overall length 125 mm Shank size 1/4 inch Shank type Hex Material (drill bit) HSS n: BOSCH 2608577062 twist drill bit HSS hex shank 9 x 81 x 125 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Spiral drill bit HSS hex shank 9 x 81 x 125 mm Very robust with impact screwdrivers Extremely robust Impact Control HSS spiral drill for drilling in metal, especially with impact screwdrivers The super-strong body is extremely robust Advantages Extremely robust - The very robust Impact Control HSS spiral drill bit is suitable for drilling in metal, especially with impact screwdrivers. The very strong body is exceptionally robust. The spiral drill is precision ground from solid metal and fitted with an oxide-coated groove. This gives the drill an excellent surface quality for low-wear drilling into materials. Suitable for alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non-ferrous metals, metal sheets and plastics. This drill bit is suitable for drive systems for 1/4-inch hex shafts, for universal use with drill/screwdrivers, impact screwdrivers and drill stands. Hex shank for maximum power transfer in standard three-claw drill chucks and drill/screwdriver holders. ds: dsc: kts: twist drill bit HSS hex shank 9 x 81 x 125 mm kpn: 2608577062 kpn_dash: kpn_clear: 2608577062 bkpn: BOSCH 2608577062 bkpn_clear: BOSCH 2608577062 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608577062 sr_ns: BOSCH2608577062
r: 02220312 p: 10.6 pid: 129870 b: BOSCH q: 0 st: lt: 8 ean: 3165140046312 sr: BOSCH 1618596316 sr_no_br: 1618596316 sr_no_br_cl: 1618596316 sr_cl: BOSCH1618596316 sr_dash: sold: 0 p_range: none act: 1 avo: av: Diameter 11 mm Cutting length 150 mm Drill bit type Hammer drill bit Overall length 215 mm Shank type SDS-plus Material (drill bit) Carbide tip n: BOSCH 1618596316 hammer drill SDS-Plus-5, 11 x 150 x 215 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Hammer drill bit SDS-Plus-5, 11 x 150 x 215 mm Easy drilling in concrete SDS-Plus-5 drill bit drills effortlessly Serrated carbide plate for effortless drilling without jamming Benefits Effortless drilling in concrete - The SDS plus-5 drill bit drills effortlessly. The carbide drill has spirals and notches that make it easier for the drill to penetrate the concrete and prevent jamming. The drill bit is held in place by the Activeteq centring ring so it cannot slip and the hole is not drilled too large. The AWB brazing and hardening technology also increases robustness during drilling, making drilling less stressful for the user. The drill bit is suitable for drilling in masonry and concrete. This drill fits drill hammers with an SDS plus holder. The wear indicator shows whether the diameter of the hole is within tolerance, which is necessary to accurately position the metal anchor. The quality mark of the PGM Masonry Drill Bit Association Board on this drill bit guarantees that it is within close tolerances, drills very accurately and does not slip while drilling fixing holes. The drill bit is 'Made in Germany'. Fits all SDS plus rotary hammers. ds: dsc: kts: hammer drill SDS-Plus-5, 11 x 150 x 215 mm kpn: 1618596316 kpn_dash: kpn_clear: 1618596316 bkpn: BOSCH 1618596316 bkpn_clear: BOSCH 1618596316 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 1618596316 sr_ns: BOSCH1618596316
r: 02221538 p: 10.58 pid: 134281 b: BOSCH q: 0 st: lt: 8 ean: 3165140483384 sr: BOSCH 2608585604 sr_no_br: 2608585604 sr_no_br_cl: 2608585604 sr_cl: BOSCH2608585604 sr_dash: sold: 0 p_range: none act: 1 avo: av: Diameter 8,5 mm Cutting length 100 mm Drill bit type Hammer drill bit Overall length 165 mm Shank type SDS-plus Material (drill bit) Carbide tip n: BOSCH 2608585604 hammer drill SDS-Plus-5, 8.5 x 100 x 165 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Hammer drill bit SDS-Plus-5, 8.5 x 100 x 165 mm Easy drilling in concrete SDS-Plus-5 drill bit drills effortlessly Serrated carbide plate for effortless drilling without jamming Advantages Effortless drilling in concrete - The SDS plus-5 drill bit drills effortlessly. The carbide drill bit features spirals and notches that make it easier for the drill bit to penetrate the concrete and prevent jamming. The drill bit is held in place by the Activeteq centring ring so it cannot slip and the hole is not drilled too large. The AWB brazing and hardening technology also increases robustness during drilling, making drilling less stressful for the user. The drill bit is suitable for drilling in masonry and concrete. This drill fits drill hammers with an SDS plus holder. The wear indicator shows whether the diameter of the hole is within tolerance, which is necessary to accurately position the metal anchor. The quality mark of the PGM Masonry Drill Bit Association Board on this drill bit guarantees that it is within close tolerances, drills very accurately and does not slip while drilling fixing holes. The drill bit is 'Made in Germany'. Fits all SDS plus rotary hammers. ds: dsc: kts: hammer drill SDS-Plus-5, 8.5 x 100 x 165 mm kpn: 2608585604 kpn_dash: kpn_clear: 2608585604 bkpn: BOSCH 2608585604 bkpn_clear: BOSCH 2608585604 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608585604 sr_ns: BOSCH2608585604
r: 01049200 p: 10.42 pid: 128813 b: BOSCH q: 0 st: lt: 8 ean: 3165140189118 sr: BOSCH 2608597779 sr_no_br: 2608597779 sr_no_br_cl: 2608597779 sr_cl: BOSCH2608597779 sr_dash: sold: 0 p_range: none act: 1 avo: av: Diameter 6,5 mm Cutting length 200 mm Drill bit type Hammer drill bit Overall length 265 mm Shank type SDS-plus Material (drill bit) Carbide tip n: BOSCH 2608597779 hammer drill SDS-Plus-5, 6.5 x 200 x 265 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Hammer drill bit SDS-Plus-5, 6.5 x 200 x 265 mm Easy drilling in concrete SDS-Plus-5 drill bit drills effortlessly Serrated carbide plate for effortless drilling without jamming Advantages Effortless drilling in concrete - The SDS plus-5 drill bit drills effortlessly. The carbide drill bit features spirals and notches that make it easier for the drill bit to penetrate the concrete and prevent jamming. The drill bit is held in place by the Activeteq centring ring so it cannot slip and the hole is not drilled too large. The AWB brazing and hardening technology also increases robustness during drilling, making drilling less stressful for the user. The drill bit is suitable for drilling in masonry and concrete. This drill fits drill hammers with an SDS plus holder. The wear indicator shows whether the diameter of the hole is within tolerance, which is necessary to accurately position the metal anchor. The quality mark of the PGM Masonry Drill Bit Association Board on this drill bit guarantees that it is within close tolerances, drills very accurately and does not slip while drilling fixing holes. The drill bit is 'Made in Germany'. Fits all SDS plus rotary hammers. ds: dsc: kts: hammer drill SDS-Plus-5, 6.5 x 200 x 265 mm kpn: 2608597779 kpn_dash: kpn_clear: 2608597779 bkpn: BOSCH 2608597779 bkpn_clear: BOSCH 2608597779 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608597779 sr_ns: BOSCH2608597779
r: 02881994 p: 10.34 pid: 140647 b: BOSCH q: 0 st: lt: 10 ean: 3165140908139 sr: BOSCH 2608577304 sr_no_br: 2608577304 sr_no_br_cl: 2608577304 sr_cl: BOSCH2608577304 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: av: Diameter 13 mm Material (drill bit) HSS Cutting length 101 mm Standard DIN 338 Number of cutting edges 2 ea Shank type Cylindrical - tapered Shank size 13 Overall length 151 mm Drill bit type Metal drill bit n: BOSCH 2608577304 HSS spiral drill PointTeQ with reduced shank 13.0 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Spiral drill bit HSS PointTeQ 13 mm reduced take-up shank Fast drilling in metal The HSS spiral drill PointTeQ offers fast drilling in metal thanks to the PointTeQ tip The self-centring tip prevents drift, enabling quick and easy drilling starts Advantages Fast drilling in metal - The HSS spiral drill PointTeQ offers fast drilling in metal thanks to the PointTeQ tip. Fast and easy drill start thanks to the self-centring tip that prevents drift. Higher drilling speed reduces the risk of heating and wear. The PointTeQ tip stays sharp. This guarantees excellent durability. The drill bit is suitable for drilling through-holes and centring holes in alloyed and unalloyed steel, non-ferrous metals, cast iron and plastic. Has a cylindrical shank and is intended for use in drill stands and drill/screw machines. The risk of breaking is low, especially for drill bits with a diameter of less than 6 mm, as the drill bit is built very elastically. The black oxide-coated spiral allows fast chip removal. The HSS PointTeQ spiral drill bit is manufactured in accordance with DIN 338. The drill bit is type N (spiral angle) with tip of 135 degrees. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: HSS spiral drill PointTeQ with reduced shank 13.0 mm kpn: 2608577304 kpn_dash: kpn_clear: 2608577304 bkpn: BOSCH 2608577304 bkpn_clear: BOSCH 2608577304 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608577304 sr_ns: BOSCH2608577304
r: 02791397 p: 9.93 pid: 134616 b: BOSCH q: 0 st: lt: 8 ean: 3165140690379 sr: BOSCH 2608588146 sr_no_br: 2608588146 sr_no_br_cl: 2608588146 sr_cl: BOSCH2608588146 sr_dash: sold: 0 p_range: none act: 1 avo: av: Diameter 6 mm Cutting length 200 mm Drill bit type Concrete drill bit Overall length 250 mm Shank size 6 mm Shank type Cylindrical Material (drill bit) Carbide tip n: BOSCH 2608588146 concrete drill CYL-5, 6 x 200 x 250 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Concrete drill bit CYL-5, 6 x 200 x 250 mm Long service life in concrete and stone CYL-5 drill bit lasts a long time when drilling fixing holes in concrete and stone Bosch carbide mixture and diamond-ground cutting edges for a wear-resistant drill bit Advantages Extra long life - Drill bit CYL-5 lasts extra long when drilling in concrete and stone. The drill bit is extremely wear-resistant thanks to a combination of diamond-ground cutting edges and a carbide mixture developed by Bosch itself. Friction on the spiral through drilled material is significantly reduced thanks to a vario design with 2 spirals with a short, variable slope for good drill dust removal and less wear. The Bosch Power Grip Shank System ensures that power is fully transferred from machine to drill bit. This allows the full power of the machine to be used for drilling and the drill bit wears less quickly. For drilling fixing holes in concrete, natural and artificial stone. This drill fits cylinder shank systems for all corded or cordless drills. The quality mark of the PGM Masonry Drill Bit Association Board on this drill bit guarantees that this drill bit is within close tolerances, drills very accurately and does not slip while drilling fixing holes. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: concrete drill CYL-5, 6 x 200 x 250 mm kpn: 2608588146 kpn_dash: kpn_clear: 2608588146 bkpn: BOSCH 2608588146 bkpn_clear: BOSCH 2608588146 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608588146 sr_ns: BOSCH2608588146
r: 02894782 p: 9.7 pid: 132338 b: BOSCH q: 0 st: lt: 8 ean: 3165140908122 sr: BOSCH 2608577303 sr_no_br: 2608577303 sr_no_br_cl: 2608577303 sr_cl: BOSCH2608577303 sr_dash: sold: 0 p_range: none act: 1 avo: av: Diameter 12,5 mm Cutting length 101 mm Drill bit type Metal drill bit Overall length 151 mm Shank size 12,5 Shank type Cylindrical - tapered Material (drill bit) HSS Standard DIN 338 n: BOSCH 2608577303 HSS twist drill PointTeQ with reduced shank 12.5 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Spiral drill bit HSS PointTeQ 12.5 mm reduced take-up shank Fast drilling in metal The HSS spiral drill PointTeQ offers fast drilling in metal thanks to the PointTeQ tip The self-centring tip prevents drift, enabling quick and easy drilling starts Advantages Fast drilling in metal - The HSS spiral drill PointTeQ offers fast drilling in metal thanks to the PointTeQ tip. Fast and easy drill start thanks to the self-centring tip that prevents drift. Higher drilling speed reduces the risk of heating and wear. The PointTeQ tip stays sharp. This guarantees excellent durability. The drill bit is suitable for drilling through-holes and centring holes in alloyed and unalloyed steel, non-ferrous metals, cast iron and plastic. Has a cylindrical shank and is intended for use in drill stands and drill/screw machines. The risk of breaking is low, especially for drill bits with a diameter of less than 6 mm, as the drill bit is built very elastically. The black oxide-coated spiral allows fast chip removal. The HSS PointTeQ spiral drill bit is manufactured in accordance with DIN 338. The drill bit is of type N (spiral angle) with tip of 135 degrees. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: HSS twist drill PointTeQ with reduced shank 12.5 mm kpn: 2608577303 kpn_dash: kpn_clear: 2608577303 bkpn: BOSCH 2608577303 bkpn_clear: BOSCH 2608577303 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608577303 sr_ns: BOSCH2608577303
r: 02790073 p: 9.61 pid: 136039 b: BOSCH q: 0 st: lt: 8 ean: 3165140872164 sr: BOSCH 2608577129 sr_no_br: 2608577129 sr_no_br_cl: 2608577129 sr_cl: BOSCH2608577129 sr_dash: sold: 0 p_range: none act: 1 avo: av: Diameter 8,5 mm Cutting length 75 mm Drill bit type Metal drill bit Overall length 117 mm Shank size 1/4 inch Shank type Hex Material (drill bit) HSS n: BOSCH 2608577129 twist drill bit HSS hex shank 8.5 x 75 x 117 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Spiral drill bit HSS hex shank 8.5 x 75 x 117 mm Very robust with impact screwdrivers Extremely robust Impact Control HSS spiral drill for drilling in metal, especially with impact screwdrivers The super-strong body is extremely robust Advantages Extremely robust - The very robust Impact Control HSS spiral drill bit is suitable for drilling in metal, especially with impact screwdrivers. The very strong body is exceptionally robust. The spiral drill is precision ground from solid metal and fitted with an oxide-coated groove. This gives the drill an excellent surface quality for low-wear drilling into materials. Suitable for alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non-ferrous metals, metal sheets and plastics. This drill bit is suitable for drive systems for 1/4-inch hex shafts, for universal use with drill/screwdrivers, impact screwdrivers and drill stands. Hex shank for maximum power transfer in standard three-claw drill chucks and drill/screwdriver holders. ds: dsc: kts: twist drill bit HSS hex shank 8.5 x 75 x 117 mm kpn: 2608577129 kpn_dash: kpn_clear: 2608577129 bkpn: BOSCH 2608577129 bkpn_clear: BOSCH 2608577129 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608577129 sr_ns: BOSCH2608577129
r: 02790043 p: 9.46 pid: 136842 b: BOSCH q: 0 st: lt: 8 ean: 3165140858892 sr: BOSCH 2608577061 sr_no_br: 2608577061 sr_no_br_cl: 2608577061 sr_cl: BOSCH2608577061 sr_dash: sold: 0 p_range: none act: 1 avo: av: Diameter 8 mm Cutting length 69 mm Drill bit type Metal drill bit Overall length 109 mm Shank size 1/4 inch Shank type Hex Material (drill bit) HSS n: BOSCH 2608577061 twist drill bit HSS hex shank 8 x 75 x 117 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Spiral drill bit HSS hex shank 8 x 75 x 117 mm Very robust with impact screwdrivers Extremely robust Impact Control HSS spiral drill for drilling in metal, especially with impact screwdrivers The super-strong body is extremely robust Advantages Extremely robust - The very robust Impact Control HSS spiral drill bit is suitable for drilling in metal, especially with impact screwdrivers. The very strong body is exceptionally robust. The spiral drill is precision ground from solid metal and fitted with an oxide-coated groove. This gives the drill an excellent surface quality for low-wear drilling into materials. Suitable for alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non-ferrous metals, metal sheets and plastics. This drill bit is suitable for drive systems for 1/4-inch hex shafts, for universal use with drill/screwdrivers, impact screwdrivers and drill stands. Hex shank for maximum power transfer in standard three-claw drill chucks and drill/screwdriver holders. ds: dsc: kts: twist drill bit HSS hex shank 8 x 75 x 117 mm kpn: 2608577061 kpn_dash: kpn_clear: 2608577061 bkpn: BOSCH 2608577061 bkpn_clear: BOSCH 2608577061 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608577061 sr_ns: BOSCH2608577061
r: 02894498 p: 9.37 pid: 132537 b: BOSCH q: 0 st: lt: 8 ean: 3165140906869 sr: BOSCH 2608577177 sr_no_br: 2608577177 sr_no_br_cl: 2608577177 sr_cl: BOSCH2608577177 sr_dash: sold: 0 p_range: none act: 1 avo: av: Diameter 13 mm Cutting length 101 mm Drill bit type Metal drill bit Overall length 151 mm Shank size 13 mm Shank type Cylindrical Material (drill bit) HSS Standard DIN 338 n: BOSCH 2608577177 twist drill bit HSS PointTeQ 13 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Spiral drill bit HSS PointTeQ 13 mm Fast drilling in metal The HSS spiral drill PointTeQ offers fast drilling in metal thanks to the PointTeQ tip The self-centring tip prevents drift, enabling fast and easy drilling starts Advantages Fast drilling in metal - The HSS spiral drill PointTeQ offers fast drilling in metal thanks to the PointTeQ tip. Fast and easy drill start thanks to the self-centring tip that prevents drift. Higher drilling speed reduces the risk of heating and wear. The PointTeQ tip stays sharp. This guarantees excellent durability. The drill bit is suitable for drilling through-holes and centring holes in alloyed and unalloyed steel, non-ferrous metals, cast iron and plastic. Has a cylindrical shank and is intended for use in drill stands and drill/screw machines. The risk of breaking is low, especially for drill bits with a diameter of less than 6 mm, as the drill bit is built very elastically. The black oxide-coated spiral allows fast chip removal. The HSS PointTeQ spiral drill bit is manufactured in accordance with DIN 338. The drill bit is type N (spiral angle) with tip of 135 degrees. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: twist drill bit HSS PointTeQ 13 mm kpn: 2608577177 kpn_dash: kpn_clear: 2608577177 bkpn: BOSCH 2608577177 bkpn_clear: BOSCH 2608577177 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608577177 sr_ns: BOSCH2608577177
r: 01049223 p: 9.36 pid: 130323 b: BOSCH q: 0 st: lt: 8 ean: 3165140189101 sr: BOSCH 2608597778 sr_no_br: 2608597778 sr_no_br_cl: 2608597778 sr_cl: BOSCH2608597778 sr_dash: sold: 0 p_range: none act: 1 avo: av: Diameter 6,5 mm Cutting length 150 mm Drill bit type Hammer drill bit Overall length 215 mm Shank type SDS-plus Material (drill bit) Carbide tip n: BOSCH 2608597778 hammer drill SDS-Plus-5, 6.5 x 150 x 215 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Hammer drill bit SDS-Plus-5, 6.5 x 150 x 215 mm Easy drilling in concrete SDS-Plus-5 drill bit drills effortlessly Toothed carbide plate for effortless drilling without jamming Advantages Effortless drilling in concrete - The SDS plus-5 drill bit drills effortlessly. The carbide drill has spirals and notches that make it easier for the drill to penetrate the concrete and prevent jamming. The drill bit is held in place by the Activeteq centring ring so it cannot slip and the hole is not drilled too large. The AWB brazing and hardening technology also increases robustness during drilling, making it less stressful for the user. The drill bit is suitable for drilling in masonry and concrete. This drill fits drill hammers with an SDS plus holder. The wear indicator shows whether the diameter of the hole is within tolerance, which is necessary to accurately position the metal anchor. The quality mark of the PGM Masonry Drill Bit Association Board on this drill bit guarantees that it is within close tolerances, drills very accurately and does not slip while drilling fixing holes. The drill bit is 'Made in Germany'. Fits all SDS plus rotary hammers. ds: dsc: kts: hammer drill SDS-Plus-5, 6.5 x 150 x 215 mm kpn: 2608597778 kpn_dash: kpn_clear: 2608597778 bkpn: BOSCH 2608597778 bkpn_clear: BOSCH 2608597778 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608597778 sr_ns: BOSCH2608597778
