r: 02221282 p: 55.26 pid: 131366 b: BOSCH q: 0 st: lt: 8 ean: 3165140488990 sr: BOSCH 2608580301 sr_no_br: 2608580301 sr_no_br_cl: 2608580301 sr_cl: BOSCH2608580301 sr_dash: sold: 55.26 p_range: none act: 1 avo: av: Diameter 19 mm n: BOSCH 2608580301 diamond holesaw Power-Change, Diamond for Hard Ceramics 19 mm cn: DIAMOND DRILL BIT cn2: DIAMOND DRILL BIT cn_clear: DIAMONDDRILLBIT d: Product description Diamond hole saw Power-Change, Diamond for Hard Ceramics 19 mm Drills through the hardest tiles Diamond for Hard Ceramics cuts through the hardest tiles Diamond coating gives this holesaw durability when drilling into very hard tiles Benefits Drills into the hardest tiles - The Diamond for Hard Ceramics holesaw cuts through the hardest tiles. Thanks to its diamond coating, this holesaw lasts a long time when drilling into very hard tiles made of all kinds of ceramic materials. The thin cutting edge of this holesaw ensures sharp edges. Use this hole saw when drilling into wall and floor tiles. It is suitable for corded and cordless drilling/screwing machines. The Diamond for Hard Ceramics diamond holesaw features Bosch's unique power-change adapter with the fastest mounting system on the market. It allows locking and unlocking of the holesaw and centring bits in one click. For use with the tool-free Bosch Power Change Plus adapter: offers accuracy and robustness. ds: dsc: kts: diamond holesaw Power-Change, Diamond for Hard Ceramics 19 mm kpn: 2608580301 kpn_dash: kpn_clear: 2608580301 bkpn: BOSCH 2608580301 bkpn_clear: BOSCH 2608580301 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Diamond drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch diamond drill bit sr_no_br_cl_ns: 2608580301 sr_ns: BOSCH2608580301
r: 02222549 p: 10.46 pid: 132054 b: BOSCH q: 0 st: lt: 8 ean: 3165140189057 sr: BOSCH 2608597773 sr_no_br: 2608597773 sr_no_br_cl: 2608597773 sr_cl: BOSCH2608597773 sr_dash: sold: 52.3 p_range: none act: 1 avo: av: Diameter 3,5 mm Cutting length 50 mm Drill bit type Hammer drill bit Overall length 110 mm Shank type SDS-plus Material (drill bit) Carbide tip n: BOSCH 2608597773 hammer drill SDS-Plus-5, 3.5 x 50 x 110 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Hammer drill bit SDS-Plus-5, 3.5 x 50 x 110 mm Easy drilling in concrete SDS-Plus-5 drill bit drills effortlessly Serrated carbide plate for effortless drilling without jamming Advantages Effortless drilling in concrete - The SDS plus-5 drill bit drills effortlessly. The carbide drill bit features spirals and notches that make it easier for the drill bit to penetrate the concrete and prevent jamming. The drill bit is held in place by the Activeteq centring ring so it cannot slip and the hole is not drilled too large. The AWB brazing and hardening technology also increases robustness during drilling, making drilling less stressful for the user. The drill bit is suitable for drilling in masonry and concrete. This drill fits drill hammers with an SDS plus holder. The wear indicator shows whether the diameter of the hole is within tolerance, which is necessary to accurately position the metal anchor. The quality mark of the PGM Masonry Drill Bit Association Board on this drill bit guarantees that it is within close tolerances, drills very accurately and does not slip while drilling fixing holes. The drill bit is 'Made in Germany'. Fits all SDS plus rotary hammers. ds: dsc: kts: hammer drill SDS-Plus-5, 3.5 x 50 x 110 mm kpn: 2608597773 kpn_dash: kpn_clear: 2608597773 bkpn: BOSCH 2608597773 bkpn_clear: BOSCH 2608597773 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608597773 sr_ns: BOSCH2608597773
r: 02221533 p: 26.14 pid: 134261 b: BOSCH q: 0 st: lt: 8 ean: 3165140483339 sr: BOSCH 2608585599 sr_no_br: 2608585599 sr_no_br_cl: 2608585599 sr_cl: BOSCH2608585599 sr_dash: sold: 52.28 p_range: none act: 1 avo: av: Diameter 5 mm Cutting length 400 mm Drill bit type Hammer drill bit Overall length 465 mm Shank type SDS-plus Material (drill bit) Carbide tip n: BOSCH 2608585599 hammer drill SDS-Plus-5, 5 x 400 x 465 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Hammer drill bit SDS-Plus-5, 5 x 400 x 465 mm Easy drilling in concrete SDS-Plus-5 drill bit drills effortlessly Serrated carbide plate for effortless drilling without jamming Advantages Effortless drilling in concrete - The SDS plus-5 drill bit drills effortlessly. The carbide drill has spirals and notches that make it easier for the drill to penetrate the concrete and prevent jamming. The drill bit is held in place by the Activeteq centring ring so it cannot slip and the hole is not drilled too large. The AWB brazing and hardening technology also increases robustness during drilling, making drilling less stressful for the user. The drill bit is suitable for drilling in masonry and concrete. This drill fits drill hammers with an SDS plus holder. The wear indicator shows whether the diameter of the hole is within tolerance, which is necessary to accurately position the metal anchor. The quality mark of the PGM Masonry Drill Bit Association Board on this drill bit guarantees that it is within close tolerances, drills very accurately and does not slip while drilling fixing holes. The drill bit is 'Made in Germany'. Fits all SDS plus rotary hammers. ds: dsc: kts: hammer drill SDS-Plus-5, 5 x 400 x 465 mm kpn: 2608585599 kpn_dash: kpn_clear: 2608585599 bkpn: BOSCH 2608585599 bkpn_clear: BOSCH 2608585599 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608585599 sr_ns: BOSCH2608585599
r: 02222459 p: 46.26 pid: 134743 b: BOSCH q: 0 st: lt: 8 ean: 3165140148245 sr: BOSCH 2608597608 sr_no_br: 2608597608 sr_no_br_cl: 2608597608 sr_cl: BOSCH2608597608 sr_dash: sold: 46.26 p_range: none act: 1 avo: av: Diameter 26 mm Cutting length 90 mm Drill bit type Wood drill bit Overall length 90 mm Shank size 8 mm Shank type Cylindrical Material (drill bit) Carbide tip n: BOSCH 2608597608 synthetic drill bit carbide 26 x 90 mm, d 8 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Artificial carbide drill bit 26 x 90 mm, d 8 mm Precise holes in abrasive materials The tungsten carbide hinge drill bit can be used to drill very precise holes in abrasive materials Gives fantastic results due to carbide cutting edges combined with diamond-ground tungsten Advantages For holes that are just big enough - The tungsten carbide hinge drill bit allows very precise holes to be drilled in abrasive materials. Its special characteristics make it ideal for joiners and carpenters, especially for the production of windows, doors and kitchens. Due to the carbide, with diamond-ground tungsten cutting edges, this drill produces the best results. In addition, the centring tip helps ensure an accurate drill point start, and the two main and side cutting edges shoot through the material, for highly accurate and splinter-free blind holes. Suitable for abrasive materials, such as hardwood, plywood, chipboard and fibreboard. This hinge drill has a cylindrical shank and is intended for use in portable drills and drill stands. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: synthetic drill bit carbide 26 x 90 mm, d 8 mm kpn: 2608597608 kpn_dash: kpn_clear: 2608597608 bkpn: BOSCH 2608597608 bkpn_clear: BOSCH 2608597608 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608597608 sr_ns: BOSCH2608597608
r: 02791977 p: 23.11 pid: 134588 b: BOSCH q: 0 st: lt: 8 ean: 3165140857963 sr: BOSCH 2608577006 sr_no_br: 2608577006 sr_no_br_cl: 2608577006 sr_cl: BOSCH2608577006 sr_dash: sold: 46.22 p_range: none act: 1 avo: av: Diameter 20 mm Cutting length 90 mm Drill bit type Wood drill bit Overall length 90 mm Shank size 8 mm Shank type Cylindrical Material (drill bit) HSS n: BOSCH 2608577006 machine wood drill bit with shank diameter 8 mm, toothed design, 20 x 90 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Machine wood drill bit 20 x 90 mm, d 8 mm, toothed-edge Outstanding lifetime for accurate drill holes Machine wood drill bit has an outstanding lifetime for drilling accurate holes The toothed-edge design generates less friction and heat, making the drill bit last longer Advantages Excellent lifetime - The machine wood drill has an outstanding lifetime for drilling accurate holes. The serrated design generates less friction and heat, making the drill bit last longer. The accurate short centring tip has two main cutting edges and an edge cutting edge (toothed) for optimum results. Due to the large chip-free zones, which optimise chip removal, drilling accuracy is even higher. This allows splinter-free drilling of smooth blind holes, as well as corner drilling, e.g. when fastening hinges or dowels and removing brush holes. To be used for soft- and hardwood, veneer and non-laminated chipboard. It is intended for all drills (drill/screw machines, drill stands) with a 10 mm chuck. The 3-sided shank of the machine wood drill prevents it from rotating in the drill head. Manufactured according to DIN 7483G, hardness of cutting part is at least 50 HRC. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: Scope of delivery Precision drill bit with two main and side cutting edges as well as short centring tip kts: machine wood drill bit with shank diameter 8 mm, toothed design, 20 x 90 mm kpn: 2608577006 kpn_dash: kpn_clear: 2608577006 bkpn: BOSCH 2608577006 bkpn_clear: BOSCH 2608577006 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608577006 sr_ns: BOSCH2608577006
r: 02225527 p: 7.68 pid: 127844 b: BOSCH q: 0 st: lt: 8 ean: 3165140045186 sr: BOSCH 2608596119 sr_no_br: 2608596119 sr_no_br_cl: 2608596119 sr_cl: BOSCH2608596119 sr_dash: sold: 46.08 p_range: none act: 1 avo: av: Diameter 6,35 mm Overall length 102 mm Quantity per blister 1 n: BOSCH 2608596119 centre drill bit HSS-G hexagonal 102mm cn: PILOT DRILL cn2: PILOT DRILL cn_clear: PILOTDRILL d: Product description Centring bit HSS-G hexagonal 102 mm Drill guide Centring drill bit drills centring hole to guide hole saw into position Centring drill bit drills holes through a wide range of materials Advantages Drill guide - The centre drill bit drills the centre hole to guide the hole saw into position. Use this centring drill when drilling holes through a wide range of materials. It is suitable for all corded and cordless drill/drivers. Fits standard threaded adapter. ds: dsc: Scope of delivery Paper / cardboard / corrugated board - packaging, sleeve, with Euro die-cut kts: centre drill bit HSS-G hexagonal 102mm kpn: 2608596119 kpn_dash: kpn_clear: 2608596119 bkpn: BOSCH 2608596119 bkpn_clear: BOSCH 2608596119 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Pilot drill | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch pilot drill sr_no_br_cl_ns: 2608596119 sr_ns: BOSCH2608596119
r: 02791972 p: 21.19 pid: 136201 b: BOSCH q: 0 st: lt: 8 ean: 3165140857925 sr: BOSCH 2608577002 sr_no_br: 2608577002 sr_no_br_cl: 2608577002 sr_cl: BOSCH2608577002 sr_dash: sold: 42.38 p_range: none act: 1 avo: av: Diameter 14 mm Drill bit type Wood drill bit Overall length 90 mm Shank size 8 mm Shank type Cylindrical Material (drill bit) HSS Cutting length 90 mm n: BOSCH 2608577002 machine wood drill bit with shank diameter 8 mm, toothed design, 14 x 90 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Machine wood drill bit 14 x 90 mm, d 8 mm, toothed-edge Outstanding lifetime for accurate drill holes Machine wood drill bit has an outstanding lifetime for drilling accurate holes The toothed-edge design generates less friction and heat, making the drill bit last longer Advantages Excellent lifetime - The machine wood drill has an outstanding lifetime for drilling accurate holes. The serrated design generates less friction and heat, making the drill bit last longer. The accurate short centring tip has two main cutting edges and an edge cutting edge (toothed) for optimum results. Due to the large chip-free zones, which optimise chip removal, drilling accuracy is even higher. This allows splinter-free drilling of smooth blind holes, as well as corner drilling, e.g. when fastening hinges or dowels and removing brush holes. To be used for soft- and hardwood, veneer and non-laminated chipboard. It is intended for all drills (drill/screw machines, drill stands) with a 10 mm chuck. The 3-sided shank of the machine wood drill prevents it from rotating in the drill head. Manufactured according to DIN 7483G, hardness of cutting part is at least 50 HRC. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: Scope of delivery Precision drill bit with two main and side cutting edges as well as short centring tip kts: machine wood drill bit with shank diameter 8 mm, toothed design, 14 x 90 mm kpn: 2608577002 kpn_dash: kpn_clear: 2608577002 bkpn: BOSCH 2608577002 bkpn_clear: BOSCH 2608577002 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608577002 sr_ns: BOSCH2608577002
r: 02791970 p: 20.97 pid: 134677 b: BOSCH q: 0 st: lt: 8 ean: 3165140857918 sr: BOSCH 2608577001 sr_no_br: 2608577001 sr_no_br_cl: 2608577001 sr_cl: BOSCH2608577001 sr_dash: sold: 41.94 p_range: none act: 1 avo: av: Diameter 12 mm Drill bit type Wood drill bit Overall length 90 mm Shank size 8 mm Shank type Cylindrical Material (drill bit) HSS Cutting length 90 mm n: BOSCH 2608577001 machine wood drill bit with shank diameter 8 mm, toothed design, 12 x 90 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Machine wood drill bit 12 x 90 mm, d 8 mm, toothed-edge Outstanding lifetime for accurate drill holes Machine wood drill bit has an outstanding lifetime for drilling accurate holes The toothed-edge design generates less friction and heat, making the drill bit last longer Advantages Excellent lifetime - The machine wood drill has an outstanding lifetime for drilling accurate holes. The serrated design generates less friction and heat, making the drill bit last longer. The accurate short centring tip has two main cutting edges and an edge cutting edge (toothed) for optimum results. Due to the large chip-free zones, which optimise chip removal, drilling accuracy is even higher. This allows splinter-free drilling of smooth blind holes, as well as corner drilling, e.g. when fastening hinges or dowels and removing brush holes. To be used for soft- and hardwood, veneer and non-laminated chipboard. It is intended for all drills (drill/screw machines, drill stands) with a 10 mm chuck. The 3-sided shank of the machine wood drill prevents it from rotating in the drill head. Manufactured according to DIN 7483G, hardness of cutting part is at least 50 HRC. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: Scope of delivery Precision drill bit with two main and side cutting edges as well as short centring tip kts: machine wood drill bit with shank diameter 8 mm, toothed design, 12 x 90 mm kpn: 2608577001 kpn_dash: kpn_clear: 2608577001 bkpn: BOSCH 2608577001 bkpn_clear: BOSCH 2608577001 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608577001 sr_ns: BOSCH2608577001
r: 02790071 p: 8.05 pid: 136036 b: BOSCH q: 0 st: lt: 8 ean: 3165140872157 sr: BOSCH 2608577128 sr_no_br: 2608577128 sr_no_br_cl: 2608577128 sr_cl: BOSCH2608577128 sr_dash: sold: 40.25 p_range: none act: 1 avo: av: Diameter 7,5 mm Cutting length 69 mm Drill bit type Metal drill bit Overall length 109 mm Shank size 1/4 inch Shank type Hex Material (drill bit) HSS n: BOSCH 2608577128 twist drill bit HSS hex shank 7.5 x 69 x 109 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Spiral drill bit HSS hex shank 7.5 x 69 x 109 mm Very robust with impact screwdrivers Extremely robust Impact Control HSS spiral drill for drilling in metal, especially with impact screwdrivers The super-strong body is extremely robust Advantages Extremely robust - The very robust Impact Control HSS spiral drill bit is suitable for drilling in metal, especially with impact screwdrivers. The very strong body is exceptionally robust. The spiral drill is precision ground from solid metal and fitted with an oxide-coated groove. This gives the drill an excellent surface quality for low-wear drilling into materials. Suitable for alloyed and unalloyed steel, cast steel, cast iron, sintered iron, non-ferrous metals, metal sheets and plastics. This drill bit is suitable for drive systems for 1/4-inch hex shafts, for universal use with drill/screwdrivers, impact screwdrivers and drill stands. Hex shank for maximum power transfer in standard three-claw drill chucks and drill/screwdriver holders. ds: dsc: kts: twist drill bit HSS hex shank 7.5 x 69 x 109 mm kpn: 2608577128 kpn_dash: kpn_clear: 2608577128 bkpn: BOSCH 2608577128 bkpn_clear: BOSCH 2608577128 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608577128 sr_ns: BOSCH2608577128
r: 02225530 p: 8.02 pid: 127848 b: BOSCH q: 0 st: lt: 8 ean: 3165140074391 sr: BOSCH 2608596199 sr_no_br: 2608596199 sr_no_br_cl: 2608596199 sr_cl: BOSCH2608596199 sr_dash: sold: 40.1 p_range: none act: 1 avo: av: Diameter 5 mm Cutting length 150 mm Drill bit type Hammer drill bit Overall length 215 mm Shank type SDS-plus Material (drill bit) Carbide tip n: BOSCH 2608596199 hammer drill SDS-Plus-5, 5 x 150 x 215 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Hammer drill bit SDS-Plus-5, 5 x 150 x 215 mm Easy drilling in concrete SDS-Plus-5 drill bit drills effortlessly Serrated carbide plate for effortless drilling without jamming Benefits Effortless drilling in concrete - The SDS plus-5 drill bit drills effortlessly. The carbide drill has spirals and notches that make it easier for the drill to penetrate the concrete and prevent jamming. The drill bit is held in place by the Activeteq centring ring so it cannot slip and the hole is not drilled too large. The AWB brazing and hardening technology also increases robustness during drilling, making drilling less stressful for the user. The drill bit is suitable for drilling in masonry and concrete. This drill fits drill hammers with an SDS plus holder. The wear indicator shows whether the diameter of the hole is within tolerance, which is necessary to accurately position the metal anchor. The quality mark of the PGM Masonry Drill Bit Association Board on this drill bit guarantees that it is within close tolerances, drills very accurately and does not slip while drilling fixing holes. The drill bit is 'Made in Germany'. Fits all SDS plus rotary hammers. ds: dsc: kts: hammer drill SDS-Plus-5, 5 x 150 x 215 mm kpn: 2608596199 kpn_dash: kpn_clear: 2608596199 bkpn: BOSCH 2608596199 bkpn_clear: BOSCH 2608596199 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608596199 sr_ns: BOSCH2608596199
r: 01049055 p: 8.01 pid: 128861 b: BOSCH q: 0 st: lt: 8 ean: 3165140060783 sr: BOSCH 2608596671 sr_no_br: 2608596671 sr_no_br_cl: 2608596671 sr_cl: BOSCH2608596671 sr_dash: sold: 40.05 p_range: none act: 1 avo: av: Diameter 2 mm Material (drill bit) HSS Cutting length 24 mm Surface treatment (drill bit) TiN Standard DIN 338 Shank type Cylindrical Shank size 2 mm Overall length 49 mm Drill bit type Metal drill bit n: BOSCH 2608596671 metal drill bit HSS-TiN, DIN 338, 2 x 24 x 49 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Metal drill bit HSS-TiN, DIN 338, 2 x 24 x 49 mm Maximum service life HSS spiral drill bit TiN-coated offers longer service life Titanium nitride coating ensures very low friction and minimal wear Advantages Maximum service life - The HSS spiral drill bit TiN-coated offers maximum service life when drilling in metal. When using the right cooling system, the drill bit has very low friction and minimal wear thanks to the TiN-coating. Thanks to the high surface quality of this ground spiral drill made of HSS (High-Speed Steel), the drill bit can be used for long periods of time. Suitable for alloyed and unalloyed steel, malleable cast iron, sintered iron, new silver, copper, bronze and hard plastics, such as Plexiglas. This drill has a cylindrical shank (drill and shank have the same diameter) and is intended for use in drill stands and drill/screw machines. The HSS spiral drill bit TiN-coated is produced in accordance with DIN 338. The drill bit is type N (spiral angle) with a tip of 135 degrees and a diameter tolerance of h8. The pointed split point ensures an active cutting action and perfect centring without expiring. Do not use in aluminium and only with a coolant. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: metal drill bit HSS-TiN, DIN 338, 2 x 24 x 49 mm kpn: 2608596671 kpn_dash: kpn_clear: 2608596671 bkpn: BOSCH 2608596671 bkpn_clear: BOSCH 2608596671 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608596671 sr_ns: BOSCH2608596671
r: 02222458 p: 39.76 pid: 132013 b: BOSCH q: 0 st: lt: 8 ean: 3165140148238 sr: BOSCH 2608597607 sr_no_br: 2608597607 sr_no_br_cl: 2608597607 sr_cl: BOSCH2608597607 sr_dash: sold: 39.76 p_range: none act: 1 avo: av: Diameter 25 mm Cutting length 90 mm Drill bit type Wood drill bit Overall length 90 mm Shank size 8 mm Shank type Cylindrical Material (drill bit) Carbide tip n: BOSCH 2608597607 artillery drill carbide 25 x 90 mm, d 8 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Artificial carbide drill bit 25 x 90 mm, d 8 mm Precise holes in abrasive materials The tungsten carbide hinge drill bit can be used to drill very precise holes in abrasive materials Gives fantastic results due to carbide cutting edges combined with diamond-ground tungsten Advantages For holes that are just big enough - The tungsten carbide hinge drill bit allows very precise holes to be drilled in abrasive materials. Its special characteristics make it ideal for joiners and carpenters, especially for the production of windows, doors and kitchens. Due to the carbide, with diamond-ground tungsten cutting edges, this drill produces the best results. In addition, the centring tip helps ensure an accurate drill point start, and the two main and side cutting edges shoot through the material, for highly accurate and splinter-free blind holes. Suitable for abrasive materials, such as hardwood, plywood, chipboard and fibreboard. This hinge drill has a cylindrical shank and is intended for use in portable drills and drill stands. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: artillery drill carbide 25 x 90 mm, d 8 mm kpn: 2608597607 kpn_dash: kpn_clear: 2608597607 bkpn: BOSCH 2608597607 bkpn_clear: BOSCH 2608597607 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608597607 sr_ns: BOSCH2608597607
r: 02222453 p: 39.03 pid: 131998 b: BOSCH q: 0 st: lt: 8 ean: 3165140148184 sr: BOSCH 2608597602 sr_no_br: 2608597602 sr_no_br_cl: 2608597602 sr_cl: BOSCH2608597602 sr_dash: sold: 39.03 p_range: none act: 1 avo: av: Diameter 16 mm Cutting length 90 mm Drill bit type Wood drill bit Overall length 90 mm Shank size 8 mm Shank type Cylindrical Material (drill bit) Carbide tip n: BOSCH 2608597602 synthetic carbide drill bit 16 x 90 mm, d 8 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Artificial carbide drill bit 16 x 90 mm, d 8 mm Precise holes in abrasive materials The tungsten carbide hinge drill bit can be used to drill very precise holes in abrasive materials Gives fantastic results due to carbide cutting edges combined with diamond-ground tungsten Advantages For holes that are just big enough - The tungsten carbide hinge drill bit allows very precise holes to be drilled in abrasive materials. Its special characteristics make it ideal for joiners and carpenters, especially for the production of windows, doors and kitchens. Due to the carbide, with diamond-ground tungsten cutting edges, this drill produces the best results. In addition, the centring tip helps ensure an accurate drill point start, and the two main and side cutting edges shoot through the material, for highly accurate and splinter-free blind holes. Suitable for abrasive materials, such as hardwood, plywood, chipboard and fibreboard. This hinge drill has a cylindrical shank and is intended for use in portable drills and drill stands. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: synthetic carbide drill bit 16 x 90 mm, d 8 mm kpn: 2608597602 kpn_dash: kpn_clear: 2608597602 bkpn: BOSCH 2608597602 bkpn_clear: BOSCH 2608597602 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608597602 sr_ns: BOSCH2608597602
r: 02225403 p: 36.87 pid: 127870 b: BOSCH q: 0 st: lt: 8 ean: 3165140028042 sr: BOSCH 1618596225 sr_no_br: 1618596225 sr_no_br_cl: 1618596225 sr_cl: BOSCH1618596225 sr_dash: sold: 36.87 p_range: none act: 1 avo: av: Diameter 14 mm Cutting length 550 mm Drill bit type Hammer drill bit Overall length 615 mm Shank type SDS-plus Material (drill bit) Carbide tip n: BOSCH 1618596225 hammer drill SDS-Plus-5, 14 x 550 x 615 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Hammer drill bit SDS-Plus-5, 14 x 550 x 615 mm Easy drilling in concrete SDS-Plus-5 drill bit drills effortlessly Serrated carbide plate for effortless drilling without jamming Advantages Effortless drilling in concrete - The SDS plus-5 drill bit drills effortlessly. The carbide drill has spirals and notches that make it easier for the drill to penetrate the concrete and prevent jamming. The drill bit is held in place by the Activeteq centring ring so it cannot slip and the hole is not drilled too large. The AWB brazing and hardening technology also increases robustness during drilling, making drilling less stressful for the user. The drill bit is suitable for drilling in masonry and concrete. This drill fits drill hammers with an SDS plus holder. The wear indicator shows whether the diameter of the hole is within tolerance, which is necessary to accurately position the metal anchor. The quality mark of the PGM Masonry Drill Bit Association Board on this drill bit guarantees that it is within close tolerances, drills very accurately and does not slip while drilling fixing holes. The drill bit is 'Made in Germany'. Fits all SDS plus rotary hammers. ds: dsc: kts: hammer drill SDS-Plus-5, 14 x 550 x 615 mm kpn: 1618596225 kpn_dash: kpn_clear: 1618596225 bkpn: BOSCH 1618596225 bkpn_clear: BOSCH 1618596225 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 1618596225 sr_ns: BOSCH1618596225
r: 03059904 p: 6.81 pid: 133250 b: BOSCH q: 0 st: lt: 8 ean: 6949509231482 sr: BOSCH 2608577533 sr_no_br: 2608577533 sr_no_br_cl: 2608577533 sr_cl: BOSCH2608577533 sr_dash: sold: 34.05 p_range: none act: 1 avo: av: Diameter 8 mm Cutting length 75 mm Drill bit type Metal drill bit Overall length 117 mm Shank size 1/4 inch Shank type Hex Material (drill bit) HSS Standard DIN 338 n: BOSCH 2608577533 metal drill bit HSS PointTeQ 8.0mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Metal drill bit HSS PointTeQ 8.0mm Fast drilling in metal The HSS PointTeQ twist drill bit with hex shank is ideal for fast drilling in metal When drilling at high speeds, there is less heat build-up and wear on the drill bit. The PointTeQ tip ensures lasting sharpness and durability Advantages Fast drilling in metal - The HSS PointTeQ spiral drill bit with hex shank drills quickly in metal. This drill bit is designed for high-speed drilling, which minimises heating and wear on the drill bit. The PointTeQ design of the tip ensures lasting sharpness and high durability. The self-centring tip prevents drift and enables quick and easy drill start. The spiral with a black oxide coating ensures fast chip removal. The drill's hexagonal shank ensures stability and firm locking of the drill bit in the chuck, making it extra reliable. The shank strengthens the body of the drill bit and reduces the risk of breakage when drilling with a diameter smaller than 6 mm. The drill bit is compatible with 1/4-inch hex shank systems for universal use with impact screwdrivers, drill/drivers and drill stands. The four-surface tip of the HSS PointTeQ spiral drill bit enables active drilling and perfect centring. Type N (spiral angle) drill bit with 135° tip in accordance with DIN 338. Hexagonal shank for maximum power transfer in standard three-claw drill chucks and drill/screw machine holders. ds: dsc: kts: metal drill bit HSS PointTeQ 8.0mm kpn: 2608577533 kpn_dash: kpn_clear: 2608577533 bkpn: BOSCH 2608577533 bkpn_clear: BOSCH 2608577533 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608577533 sr_ns: BOSCH2608577533
r: 01049193 p: 6.73 pid: 128896 b: BOSCH q: 0 st: lt: 8 ean: 3165140189064 sr: BOSCH 2608597774 sr_no_br: 2608597774 sr_no_br_cl: 2608597774 sr_cl: BOSCH2608597774 sr_dash: sold: 33.65 p_range: none act: 1 avo: av: Diameter 4 mm Cutting length 100 mm Drill bit type Hammer drill bit Overall length 165 mm Shank type SDS-plus Material (drill bit) Carbide tip n: BOSCH 2608597774 hammer drill SDS-Plus-5, 4 x 100 x 165 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Hammer drill bit SDS-Plus-5, 4 x 100 x 165 mm Easy drilling in concrete SDS-Plus-5 drill bit drills effortlessly Serrated carbide plate for effortless drilling without jamming Advantages Effortless drilling in concrete - The SDS plus-5 drill bit drills effortlessly. The carbide drill has spirals and notches that make it easier for the drill to penetrate the concrete and prevent jamming. The drill bit is held in place by the Activeteq centring ring so it cannot slip and the hole is not drilled too large. The AWB brazing and hardening technology also increases robustness during drilling, making drilling less stressful for the user. The drill bit is suitable for drilling in masonry and concrete. This drill fits drill hammers with an SDS plus holder. The wear indicator shows whether the diameter of the hole is within tolerance, which is necessary to accurately position the metal anchor. The quality mark of the PGM Masonry Drill Bit Association Board on this drill bit guarantees that it is within close tolerances, drills very accurately and does not slip while drilling fixing holes. The drill bit is 'Made in Germany'. Fits all SDS plus rotary hammers. ds: dsc: kts: hammer drill SDS-Plus-5, 4 x 100 x 165 mm kpn: 2608597774 kpn_dash: kpn_clear: 2608597774 bkpn: BOSCH 2608597774 bkpn_clear: BOSCH 2608597774 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608597774 sr_ns: BOSCH2608597774
r: 02222454 p: 32.68 pid: 132003 b: BOSCH q: 0 st: lt: 8 ean: 3165140148191 sr: BOSCH 2608597603 sr_no_br: 2608597603 sr_no_br_cl: 2608597603 sr_cl: BOSCH2608597603 sr_dash: sold: 32.68 p_range: none act: 1 avo: av: Diameter 18 mm Cutting length 90 mm Drill bit type Wood drill bit Overall length 90 mm Shank size 8 mm Shank type Cylindrical Material (drill bit) Carbide tip n: BOSCH 2608597603 synthetic carbide drill bit 18 x 90 mm, d 8 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Artificial carbide drill bit 18 x 90 mm, d 8 mm Precise holes in abrasive materials The tungsten carbide hinge drill bit can be used to drill very precise holes in abrasive materials Gives fantastic results due to carbide cutting edges combined with diamond-ground tungsten Advantages For holes that are just big enough - The tungsten carbide hinge drill bit allows very precise holes to be drilled in abrasive materials. Its special characteristics make it ideal for joiners and carpenters, especially for the production of windows, doors and kitchens. Due to the carbide, with diamond-ground tungsten cutting edges, this drill produces the best results. In addition, the centring tip helps ensure an accurate drill point start, and the two main and side cutting edges shoot through the material, for highly accurate and splinter-free blind holes. Suitable for abrasive materials, such as hardwood, plywood, chipboard and fibreboard. This hinge drill has a cylindrical shank and is intended for use in portable drills and drill stands. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: kts: synthetic carbide drill bit 18 x 90 mm, d 8 mm kpn: 2608597603 kpn_dash: kpn_clear: 2608597603 bkpn: BOSCH 2608597603 bkpn_clear: BOSCH 2608597603 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608597603 sr_ns: BOSCH2608597603
r: 02791994 p: 32.03 pid: 134305 b: BOSCH q: 0 st: lt: 8 ean: 3165140858069 sr: BOSCH 2608577016 sr_no_br: 2608577016 sr_no_br_cl: 2608577016 sr_cl: BOSCH2608577016 sr_dash: sold: 32.03 p_range: none act: 1 avo: av: Diameter 35 mm Cutting length 90 mm Drill bit type Wood drill bit Overall length 90 mm Shank size 10 mm Shank type Cylindrical Material (drill bit) HSS n: BOSCH 2608577016 machine wood drill bit with shank diameter 10 mm, toothed design, 35 x 90 mm cn: DRILL BIT cn2: DRILL BIT cn_clear: DRILLBIT d: Product description Machine wood drill bit 35 x 90 mm, d 10 mm, toothed-edge Outstanding lifetime for accurate drill holes Machine wood drill bit has an outstanding lifetime for drilling accurate holes The toothed-edge design generates less friction and heat, making the drill bit last longer Advantages Excellent lifetime - The machine wood drill has an outstanding lifetime for drilling accurate holes. The serrated design generates less friction and heat, making the drill bit last longer. The accurate short centring tip has two main cutting edges and an edge cutting edge (toothed) for optimum results. Due to the large chip-free zones, which optimise chip removal, drilling accuracy is even higher. This allows splinter-free drilling of smooth blind holes, as well as corner drilling, e.g. when fastening hinges or dowels and removing brush holes. To be used for soft- and hardwood, veneer and non-laminated chipboard. It is intended for all drills (drill/screw machines, drill stands) with a 10 mm chuck. The 3-sided shank of the machine wood drill prevents it from rotating in the drill head. Manufactured according to DIN 7483G, hardness of cutting part is at least 50 HRC. Cylindrical shank compatible with three-claw drill chucks. ds: dsc: Scope of delivery Precision drill bit with two main and side cutting edges as well as short centring tip kts: machine wood drill bit with shank diameter 10 mm, toothed design, 35 x 90 mm kpn: 2608577016 kpn_dash: kpn_clear: 2608577016 bkpn: BOSCH 2608577016 bkpn_clear: BOSCH 2608577016 c_path: Home / Tools / Machining tools / Cutting tools / Drilling and punching / Drill bit | Home / Our brands / Bosch / Bosch tools / Bosch machining tools / Bosch cutting tools / Bosch drilling and punching / Bosch drill bit sr_no_br_cl_ns: 2608577016 sr_ns: BOSCH2608577016
