Product description
- Through drill bit SDS-Max-9, Break Through 55 x 850 x 1000 mm
- Standard drill bit for drilling large and deep holes in concrete
- Drill bit SDS max-9 Break Through is used as standard when drilling large and deep holes in concrete
- Vacuum brazed and carbide tip with 3 cutters to break through large pieces of material
Advantages
- Deep holes in concrete - The SDS max-9 Break Through drill bit is used as standard when drilling large and deep holes in concrete.
- The fine-grained, carbide tip with 3 cutters is vacuum brazed and hardened for fast results and good removal of large pieces of grit.
- The drill bit's long, tapered shank allows piercing, while the U-shaped design with 2 spirals removes drilling dust well.
- The drill bit is suitable for piercing with a diameter of 45 to 80 mm in concrete, masonry and limestone for e.g. pulling cables and pipes outside.
- The drill bit is intended for use on rotary hammers.
- Note: When drilling through, always use a drill hammer with sufficient power to prevent overloading.
- Read the operating instructions first.
- Fits all SDS max rotary hammers.