Precise metal cutting for structural profiles
- Efficient clearing of chips: The specialized BW tooth geometry breaks chips into smaller pieces so you cut smoothly through steel tubes without clogging.
- Durable high-speed steel build: Premium HSS construction delivers excellent wear resistance and edge retention, ensuring long service life during demanding metal cutting.
- Secure fit on machinery: The 32 mm center bore mounts firmly to your cold saw, giving you the stability needed for true, accurate cuts.
With the Bahco 3815-275-2.5-32-1-04BW hss circular saw blade, you make clean, precise, and burr-free cuts through steel tubes and profiles. Featuring a fine BW4 tooth geometry with 220 teeth, it effectively breaks chips to prevent clogging and material deformation during cutting. The tough hss construction ensures outstanding wear resistance and edge retention during continuous professional use. With a 275 mm diameter, a 2.5 mm cutting width, and a 32 mm bore with the 32-1 pinhole pattern, this blade mounts securely on your stationary cold saw machine for maximum stability and straight cuts every time.
Product description:
- Circular saw blade HSS with bore 32-1 and BW4 teeth of 2.5 mm, diameter 275 mm
Characteristics:
- HSS circular saw blades for cutting steel, iron, metal and light metal.
- Suitable for both stationary and portable machines
- Hole pattern:
- 2 / 8,5 - 45
- 2 / 9 - 50
- 2 / 11 - 63
- Example: 2/8.5-45 = 2 pin holes Ø 8.5 mm positioned within a circle of 45 mm
- -BW is usually for cutting pipes and profiles and -C applies to cutting solid materials
- Example: -03BW = Spacing of teeth 3 mm with BW tooth shape
- Packed in handy cardboard packaging, to be used as tooth protector
- HSS circular saw with steam-treated surface
- Flexibility for use in both stationary and portable machines
- Tooth shape -BW is mainly for cutting pipes and profiles, the teeth slope alternately at 45° and break the chips in half, ensuring good chip removal.
- Tooth shape -C is used for solid parts and thick pipes; every second tooth has two chamfers on each side, while the rest have no chamfers
- A useful rule of thumb is that a minimum of three teeth should be interlocked at the same time