Product description
- Tyre pump with 75 cm hose
- Getting on the road safely means having correctly inflated tyres. Not only the car, but also caravan or bicycle tyres need to be at the right pressure for comfort and safety. This tyre pump has a 75 cm long hose, so you can easily reach everywhere.
- The tyre pump lies well in the hand and is also lightweight. With the push-in nipple, which is attached to the front of the hose, you quickly and easily attach the tyre pump to the wheel. The pressure gauge is protected by the rubber bumper. The working pressure of this tyre pump is between 0 and 12 BAR.
- The pressure gauge bears the WIKA mark. The pressure gauge is Ø 5.5 cm and you can read the number of BAR and PSI on it. The compartment is divided into green, yellow and red. Green means there is the right amount of air in the tyre, yellow means slightly too much air in it and red means there is too much air in the tyre. In the red and yellow sections, you have to let air out of the tyre again until it is in the green section. Then you can safely hit the road.
- Connecting to the compressor
- This tyre pump does not come with a coupling as standard. It features a 1/4" female thread connection size. This makes it easy to connect the tyre inflator to the compressor using a 1/4" male Euro or Orion coupling. To make an airtight connection, use Teflon sealing tape or 50ml thread sealant.
- Do you also want to use the tyre pump to inflate the bicycle tyre? Then use the car pump valve to bike valve adapter or the print adapter to go from a car pump to a bike valve.