r: 57110497 p: 1.7 pid: 41310 b: 3M - SCOTCH-BRITE q: 3520 st: 1 lt: 1 ean: 4046719780211 sr: 3M - SCOTCH-BRITE 7100182554 sr_no_br: 7100182554 sr_no_br_cl: 7100182554 sr_cl: 3MSCOTCHBRITE7100182554 sr_dash: 3M sold: 3621 p_range: none type: standard act: 1 avo: 1 av: Length 158 mm Grit size Ultra-fine Width 224 mm n: 3M - SCOTCH-BRITE 7447 Clean & Finish hand pad 158 mm x 224 mm, A VFN - 7100182554 cn: HAND SANDING PAD cn2: HAND SANDING PAD cn_clear: HANDSANDINGPAD d: Product description Get a superior alternative to steel wool, wire brushes, sandpaper and other non-woven products for cleaning or finishing tasks. Features a fine aluminium oxide abrasive grain for cleaning, finishing, granulating and removing imperfections and lint Suitable for use on wood, metal, plastic, ceramic, porcelain, glass, rubber or composites Reusable pad resists tearing, splintering, fraying and crowding and never rusts, providing long useful life Can be folded, stacked or rolled for effective cleaning or pre- and post-processing of flat, irregular or profiled surfaces Scotch-Brite General Purpose Handpad 7447 offers flexibility as well as effective cutting action and precise hand control. Our handpad uses fine aluminium oxide abrasive grain that cuts quickly and finely, leaving a smooth finished surface. Use Scotch-Brite General Purpose Hand Pad 7447 for all kinds of materials and tasks. Our pads offer flexibility as well as effective cutting action and precise hand control, for consistently fine finishing results. They are especially useful for tricky cleaning jobs. Scotch-Brite Pads are used like grade 1 steel wool, but unlike steel wool, they do not fray during use, do not rust after use and do not leave fine metal chips. The non-woven, open web material is resistant to fulling and can be used dry, with water or with solvents. After use, it can be rinsed off again for reuse. Use our multi-purpose maroon pads in a variety of ways. They lie comfortably in the hand for precise control, but can also be used with a hand block for a uniform finish, or on an orbital sander for larger areas. Our pads consist of fine aluminium oxide abrasive grains that cut quickly and finely, leaving a smooth finished surface. Industrial professionals choose aluminium oxide because of its toughness, speed and longevity. The durable abrasive grain self-degrades during use so that new cutting edges are created all the time, unlike traditional abrasive grains, such as garnet, which wear out quickly during use. Apart from sanding and finishing, alumina is often used for polishing applications for its high cutting speed, hardness, strength and low heat retention. It is suitable for numerous substrates in both wood and metalworking, including ferroalloys. Scotch-Brite Industrial Abrasives are unique surface conditioning products in which abrasive grains are mixed with non-woven nylon or other synthetic fibres. This creates an abrasive system that delivers consistent results over the life of the product. The open web material is full web resistant and keeps the abrasive minerals performing at a high level by reducing fibre clogging. Suggested applications Use for cleaning, finishing, granulating and removing imperfections and lint Apply to wood, metal, plastic, ceramic, porcelain, glass, rubber or composites ds: dsc: kts: Clean & Finish hand pad 158 mm x 224 mm, A VFN kpn: 7447 kpn_dash: kpn_clear: 7447 bkpn: 3M - SCOTCH-BRITE 7447 bkpn_clear: 3M - SCOTCH-BRITE 7447 c_path: Home / Tools / Hand tools / Sanding, grinding and deburring tools / Sanding tools / Hand sanding pad | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite hand tools / 3m - scotch-brite sanding, grinding and deburring tools / 3m - scotch-brite sanding tools / 3m - scotch-brite hand sanding pad sr_no_br_cl_ns: 7100182554 sr_ns: 3M-SCOTCH-BRITE7100182554
r: 57110460 p: 37.975 pid: 41628 b: 3M - SCOTCH-BRITE q: 66 st: 1 lt: 1 ean: 03134375325851 sr: 3M - SCOTCH-BRITE 7100182231 sr_no_br: 7100182231 sr_no_br_cl: 7100182231 sr_cl: 3MSCOTCHBRITE7100182231 sr_dash: 3M sold: 2772.175 p_range: none type: standard act: 1 avo: 1 av: Length 10 m Width 100 mm n: 3M - SCOTCH-BRITE 3760 Clean and Finish sanding roll, 100 mm x 10 m, A VFN - 7100182231 cn: HAND SANDING PAD cn2: HAND SANDING PAD cn_clear: HANDSANDINGPAD d: Product description The roll can be cut to any length The deformable pad reaches even hard-to-reach areas Suitable for manual use or on polishers with vibration function and two pads The open web structure prevents clogging, for a consistent cutting action of the abrasive Suitable for metal, wood, composite and advanced materials The Scotch-Brite Clean and Finish roller offers consistent surface finish throughout the product's lifetime. Our Clean and Finish roll can be cut to any length. The Scotch Brite Clean and Finish roll delivers consistent results for finishing, blending, polishing and cleaning various metals, woods, plastic surfaces and hard-to-reach areas. Our malleable Clean and Finish rolls can be easily cut to any length. Due to their resistance to fulling, abrasive minerals remain on the surface, ensuring consistent cutting action. These rolls can be used manually for greater control. Larger-width material can be used in combination with a hand pad holder for a uniform finish. On an orbital or vibratory sander, it is great for larger areas. ds: dsc: kts: Clean and Finish sanding roll, 100 mm x 10 m, A VFN kpn: 3760 kpn_dash: kpn_clear: 3760 bkpn: 3M - SCOTCH-BRITE 3760 bkpn_clear: 3M - SCOTCH-BRITE 3760 c_path: Home / Tools / Hand tools / Sanding, grinding and deburring tools / Sanding tools / Hand sanding pad | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite hand tools / 3m - scotch-brite sanding, grinding and deburring tools / 3m - scotch-brite sanding tools / 3m - scotch-brite hand sanding pad sr_no_br_cl_ns: 7100182231 sr_ns: 3M-SCOTCH-BRITE7100182231
r: 57111076 p: 86.115 pid: 44719 b: 3M - SCOTCH-BRITE q: 0 st: lt: 5 ean: 04001895764752 sr: 3M - SCOTCH-BRITE 7100182510 sr_no_br: 7100182510 sr_no_br_cl: 7100182510 sr_cl: 3MSCOTCHBRITE7100182510 sr_dash: 3M sold: 2066.76 p_range: none type: standard act: 1 avo: 1 av: Length 100 m Width 150 mm n: 3M - SCOTCH-BRITE 61142 Wear-resistant sanding roll WR-RL, 150 mm x 10 m, A VFN - 7100182510 cn: HAND SANDING PAD cn2: HAND SANDING PAD cn_clear: HANDSANDINGPAD d: Product description Versatile for use on various substrates Does not change the geometry of the workpiece Can be used for cleaning, finishing and light deburring Suitable for machine and manual applications Scotch-Brite Wear-resistant rollers are designed for machine and manual applications. Use our rollers for cleaning, finishing and light deburring. Use Scotch-Brite Wear-resistant roller for efficient cleaning, finishing and light deburring. Our versatile rollers can be used in machine or manual applications. Choose from grooves suitable for touching up brushed stainless steel and aluminium surfaces, mat finishing metal, removing light stains, cleaning tools. The rollers can be used for cleaning sensitive surfaces, to achieve a brushed matt effect, or for roughening painted surfaces before repainting. They can be applied after a first coat of lacquer, for intermediate sanding and also for gluing. ds: dsc: kts: Wear-resistant sanding roll WR-RL, 150 mm x 10 m, A VFN kpn: 61142 kpn_dash: kpn_clear: 61142 bkpn: 3M - SCOTCH-BRITE 61142 bkpn_clear: 3M - SCOTCH-BRITE 61142 c_path: Home / Tools / Hand tools / Sanding, grinding and deburring tools / Sanding tools / Hand sanding pad | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite hand tools / 3m - scotch-brite sanding, grinding and deburring tools / 3m - scotch-brite sanding tools / 3m - scotch-brite hand sanding pad sr_no_br_cl_ns: 7100182510 sr_ns: 3M-SCOTCH-BRITE7100182510
r: 57111304 p: 1.62 pid: 17584 b: 3M - SCOTCH-BRITE q: 0 st: lt: 4 ean: 04046719959747 sr: 3M - SCOTCH-BRITE 7100169682 sr_no_br: 7100169682 sr_no_br_cl: 7100169682 sr_cl: 3MSCOTCHBRITE7100169682 sr_dash: 3M sold: 1944 p_range: none type: standard act: 1 avo: 1 av: Length 224 mm Width 158 mm n: 3M - SCOTCH-BRITE SB 96 general purpose sanding pad green, 158 mm x 224 mm - 7100169682 cn: HAND SANDING PAD cn2: HAND SANDING PAD cn_clear: HANDSANDINGPAD d: Product description: The Scotch-Brite 96 green abrasive pad is a standard abrasive pad for various applications. Easy to rinse out and long service life Features: Standard abrasive pad for daily cleaning of most cookware and appliances Cleans two to three times faster than a standard abrasive pad and lasts 2 to 3 times longer Rustproof and flexible synthetic scouring pad as an alternative to steel wool scouring pads Also available in handy pre-cut rolls Can be used in combination with all classic cleaning products ds: dsc: kts: general purpose sanding pad green, 158 mm x 224 mm kpn: SB 96 kpn_dash: kpn_clear: SB96 bkpn: 3M - SCOTCH-BRITE SB 96 bkpn_clear: 3M - SCOTCH-BRITE SB96 c_path: Home / Tools / Hand tools / Sanding, grinding and deburring tools / Sanding tools / Hand sanding pad | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite hand tools / 3m - scotch-brite sanding, grinding and deburring tools / 3m - scotch-brite sanding tools / 3m - scotch-brite hand sanding pad sr_no_br_cl_ns: 7100169682 sr_ns: 3M-SCOTCH-BRITE7100169682
r: 57110394 p: 1.84 pid: 43103 b: 3M - SCOTCH-BRITE q: 480 st: 1 lt: 1 ean: 4046719772711 sr: 3M - SCOTCH-BRITE 7100182555 sr_no_br: 7100182555 sr_no_br_cl: 7100182555 sr_cl: 3MSCOTCHBRITE7100182555 sr_dash: 3M sold: 1731.44 p_range: none type: standard act: 1 avo: 1 av: Length 158 mm Width 224 mm Grit size Ultra-fine n: 3M - SCOTCH-BRITE 7448 CF-HP hand pad - 7100182555 cn: HAND SANDING PAD cn2: HAND SANDING PAD cn_clear: HANDSANDINGPAD d: Product description Ultra Fine finishing delivers better results than steel wool Efficient for cleaning, blending, preparing and finishing on metal, wood, plastic and composites Performs like 00-grade steel wool without fraying, rusting or splintering Cleans metal, composites and other materials without changing the base material Flexible pads adapt to irregular surfaces and get into corners and tight spaces without compromising performance Scotch-Brite Ultra Fine hand pad 7448+ is specially designed for pre- and post-processing of metal surfaces and preparation of substrates for painting. Unlike fine steel wool, they do not fray during use, do not rust after use and do not leave fine metal chips. They are flexible and long-lasting. Use Scotch-Brite Ultra Fine hand pad 7448+ instead of fine steel wool for pre- and post-processing metal surfaces and preparing substrates for painting. Our grey pads are designed to work cleaner and longer than steel wool and, unlike steel wool, they do not fray during use, do not rust after use and do not leave fine metal chips. Scotch-Brite Ultra Fine pads are filled with densely spaced silicon carbide abrasive grains, a very sharp synthetic material typically used in low-pressure applications such as paint preparation. The densely packed particles deliver consistent, uniform abrasive action throughout the life of the pad and the mineral disintegrates faster than alumina for a superior finish. Designed for ease of use, they get into tight corners and surfaces with small details without changing the size of the base material. Use them for cleaning, finishing and polishing without having to adjust, flip or replace them mid-task. Our versatile hand pads are a great addition to any workshop's toolbox and can be used manually, combined with a hand pad block or used on a line sander so you can work faster on larger areas. Scotch-Brite abrasive pads are unique surface conditioning products consisting of abrasive grains embedded in non-woven nylon fibres. Combining abrasive beads with non-woven material creates an abrasive system that delivers consistent results throughout the product life of the pad. The open web material remains cool during use and is full-bodied, keeping the abrasive minerals performing at a high level as the nylon fibres are less likely to clog. Suggested applications Use for cleaning, blending, preparing and finishing on metal, wood, plastic and composites ds: dsc: kts: CF-HP hand pad kpn: 7448 kpn_dash: kpn_clear: 7448 bkpn: 3M - SCOTCH-BRITE 7448 bkpn_clear: 3M - SCOTCH-BRITE 7448 c_path: Home / Tools / Hand tools / Sanding, grinding and deburring tools / Sanding tools / Hand sanding pad | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite hand tools / 3m - scotch-brite sanding, grinding and deburring tools / 3m - scotch-brite sanding tools / 3m - scotch-brite hand sanding pad sr_no_br_cl_ns: 7100182555 sr_ns: 3M-SCOTCH-BRITE7100182555
r: 57110458 p: 37.975 pid: 43144 b: 3M - SCOTCH-BRITE q: 30 st: 1 lt: 1 ean: 03134375325806 sr: 3M - SCOTCH-BRITE 7100182472 sr_no_br: 7100182472 sr_no_br_cl: 7100182472 sr_cl: 3MSCOTCHBRITE7100182472 sr_dash: 3M sold: 1177.225 p_range: none type: standard act: 1 avo: 1 av: Length 10 m Width 125 mm n: 3M - SCOTCH-BRITE 7453 Clean & Finish sanding roll, CF-RL, 125 mm x 10 m, A AVF - 7100182472 cn: HAND SANDING PAD cn2: HAND SANDING PAD cn_clear: HANDSANDINGPAD d: Product description Roller with pre-perforated hand pads, for even finishing, blending, polishing and cleaning. Flexible pad can also be used in hard-to-reach areas. Suitable for manual or machine use. Open web structure counteracts clogging, for consistent cutting action of the abrasive material Suitable for metal, wood, composite and advanced materials Scotch-Brite Clean & Finish Sanding Roller CF-RL delivers consistent finishing, blending, polishing and cleaning results on a wide variety of metals, wood, plastics and hard-to-reach areas. Supplied on a roll, the material can easily be cut to any length. Clean and Finish material on a roll provides constant surface conditioning throughout the life of the product. The Scotch Brite Clean and Finish roll delivers consistent results for finishing, blending, polishing and cleaning various metals, woods, plastic surfaces and hard-to-reach areas. Our malleable Clean and Finish rolls can be easily cut to any length. Due to their resistance to fulling, abrasive minerals remain on the surface, ensuring consistent cutting action. These rolls can be used manually for greater control. Larger-width material can be used in combination with a hand pad holder for a uniform finish. On an orbital or vibratory sander, it is great for larger areas. ds: dsc: kts: Clean & Finish sanding roll, CF-RL, 125 mm x 10 m, A AVF kpn: 7453 kpn_dash: kpn_clear: 7453 bkpn: 3M - SCOTCH-BRITE 7453 bkpn_clear: 3M - SCOTCH-BRITE 7453 c_path: Home / Tools / Hand tools / Sanding, grinding and deburring tools / Sanding tools / Hand sanding pad | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite hand tools / 3m - scotch-brite sanding, grinding and deburring tools / 3m - scotch-brite sanding tools / 3m - scotch-brite hand sanding pad sr_no_br_cl_ns: 7100182472 sr_ns: 3M-SCOTCH-BRITE7100182472
r: 57111046 p: 67.438 pid: 45927 b: 3M - SCOTCH-BRITE q: 15 st: 1 lt: 1 ean: 54046719792820 sr: 3M - SCOTCH-BRITE 7100182530 sr_no_br: 7100182530 sr_no_br_cl: 7100182530 sr_cl: 3MSCOTCHBRITE7100182530 sr_dash: 3M sold: 1011.57 p_range: none type: standard act: 1 avo: 1 av: Length 25 m Width 100 mm n: 3M - SCOTCH-BRITE CF-RL Clean & Finish sanding roll 100 mm x 25 m A VFN - 7100182530 cn: HAND SANDING PAD cn2: HAND SANDING PAD cn_clear: HANDSANDINGPAD d: Product description Roller with pre-perforated hand pads, for even finishing, blending, polishing and cleaning. Flexible pad can also be used in hard-to-reach areas. Suitable for manual or machine use. Open web structure counteracts clogging, for consistent cutting action of the abrasive material Suitable for metal, wood, composite and advanced materials Scotch-Brite Clean & Finish Sanding Roller CF-RL delivers consistent finishing, blending, polishing and cleaning results on a wide variety of metals, wood, plastics and hard-to-reach areas. Supplied on a roll, the material can easily be cut to any length. Clean and Finish material on a roll provides constant surface conditioning throughout the life of the product. The Scotch Brite Clean and Finish roll delivers consistent results for finishing, blending, polishing and cleaning various metals, woods, plastic surfaces and hard-to-reach areas. Our malleable Clean and Finish rolls can be easily cut to any length. Due to their resistance to fulling, abrasive minerals remain on the surface, ensuring consistent cutting action. These rolls can be used manually for greater control. Larger-width material can be used in combination with a hand pad holder for a uniform finish. On an orbital or vibratory sander, it is great for larger areas. ds: dsc: kts: Clean & Finish sanding roll 100 mm x 25 m A VFN kpn: CF-RL kpn_dash: CF kpn_clear: CFRL bkpn: 3M - SCOTCH-BRITE CF-RL bkpn_clear: 3M - SCOTCH-BRITE CFRL c_path: Home / Tools / Hand tools / Sanding, grinding and deburring tools / Sanding tools / Hand sanding pad | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite hand tools / 3m - scotch-brite sanding, grinding and deburring tools / 3m - scotch-brite sanding tools / 3m - scotch-brite hand sanding pad sr_no_br_cl_ns: 7100182530 sr_ns: 3M-SCOTCH-BRITE7100182530
r: 57110459 p: 32.892 pid: 41033 b: 3M - SCOTCH-BRITE q: 2 st: 1 lt: 1 ean: 3134375238823 sr: 3M - SCOTCH-BRITE 7100182499 sr_no_br: 7100182499 sr_no_br_cl: 7100182499 sr_cl: 3MSCOTCHBRITE7100182499 sr_dash: 3M sold: 756.516 p_range: none type: standard act: 1 avo: 1 av: Length 10 m Width 100 mm n: 3M - SCOTCH-BRITE 7611 Clean & Finish sanding roll CF-RL, 100 mm x 10 m, S UFN - 7100182499 cn: HAND SANDING PAD cn2: HAND SANDING PAD cn_clear: HANDSANDINGPAD d: Product description The roll can be cut to any length The deformable pad reaches even hard-to-reach areas Suitable for manual use or on polishers with vibration function and two pads The open web structure prevents clogging, for a consistent cutting action of the abrasive Suitable for metal, wood, composite and advanced materials The Scotch-Brite Clean and Finish roller offers consistent surface finish throughout the product's lifetime. Our Clean and Finish roll can be cut to any length. The Scotch Brite Clean and Finish roll delivers consistent results for finishing, blending, polishing and cleaning various metals, woods, plastic surfaces and hard-to-reach areas. Our malleable Clean and Finish rolls can be easily cut to any length. Due to their resistance to fulling, abrasive minerals remain on the surface, ensuring consistent cutting action. These rolls can be used manually for greater control. Larger-width material can be used in combination with a hand pad holder for a uniform finish. On an orbital or vibratory sander, it is great for larger areas. ds: dsc: kts: Clean & Finish sanding roll CF-RL, 100 mm x 10 m, S UFN kpn: 7611 kpn_dash: kpn_clear: 7611 bkpn: 3M - SCOTCH-BRITE 7611 bkpn_clear: 3M - SCOTCH-BRITE 7611 c_path: Home / Tools / Hand tools / Sanding, grinding and deburring tools / Sanding tools / Hand sanding pad | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite hand tools / 3m - scotch-brite sanding, grinding and deburring tools / 3m - scotch-brite sanding tools / 3m - scotch-brite hand sanding pad sr_no_br_cl_ns: 7100182499 sr_ns: 3M-SCOTCH-BRITE7100182499
r: 57111061 p: 63.966 pid: 45375 b: 3M - SCOTCH-BRITE q: 0 st: lt: 10 ean: 04001895764035 sr: 3M - SCOTCH-BRITE 7100182462 sr_no_br: 7100182462 sr_no_br_cl: 7100182462 sr_cl: 3MSCOTCHBRITE7100182462 sr_dash: 3M sold: 511.728 p_range: none type: standard act: 1 avo: 1 av: Length 10 m Width 100 mm n: 3M - SCOTCH-BRITE 61143 Wear-resistant sanding roll WR-RL, 100 mm x 10 m, A MED - 7100182462 cn: HAND SANDING PAD cn2: HAND SANDING PAD cn_clear: HANDSANDINGPAD d: Product description Roller with pre-perforated hand pads, for even finishing, blending, polishing and cleaning. Flexible pad can also be used in hard-to-reach areas. Suitable for manual or machine use. Open web structure combats clogging, for consistent cutting action of the abrasive Suitable for metal, wood, composite and advanced materials Scotch-Brite Clean & Finish Sanding Roller CF-RL delivers consistent finishing, blending, polishing and cleaning results on a wide variety of metals, wood, plastics and hard-to-reach areas. Supplied on a roll, the material can easily be cut to any length. Clean and Finish material on a roll offers constant surface conditioning throughout the life of the product. The Scotch Brite Clean and Finish roll delivers consistent results for finishing, blending, polishing and cleaning various metals, woods, plastic surfaces and hard-to-reach areas. Our malleable Clean and Finish rolls can be easily cut to any length. Due to their resistance to fulling, abrasive minerals remain on the surface, ensuring consistent cutting action. These rolls can be used manually for greater control. Larger-width material can be used in combination with a hand pad holder for a uniform finish. On an orbital or vibratory sander, it is great for larger areas. ds: dsc: kts: Wear-resistant sanding roll WR-RL, 100 mm x 10 m, A MED kpn: 61143 kpn_dash: kpn_clear: 61143 bkpn: 3M - SCOTCH-BRITE 61143 bkpn_clear: 3M - SCOTCH-BRITE 61143 c_path: Home / Tools / Hand tools / Sanding, grinding and deburring tools / Sanding tools / Hand sanding pad | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite hand tools / 3m - scotch-brite sanding, grinding and deburring tools / 3m - scotch-brite sanding tools / 3m - scotch-brite hand sanding pad sr_no_br_cl_ns: 7100182462 sr_ns: 3M-SCOTCH-BRITE7100182462
r: 57110405 p: 1.56 pid: 41658 b: 3M - SCOTCH-BRITE q: 140 st: 1 lt: 1 ean: 04046719934683 sr: 3M - SCOTCH-BRITE 7100182599 sr_no_br: 7100182599 sr_no_br_cl: 7100182599 sr_cl: 3MSCOTCHBRITE7100182599 sr_dash: 3M sold: 505.44 p_range: none type: standard act: 1 avo: 1 av: Length 158 mm Width 224 mm n: 3M - SCOTCH-BRITE 61089 Clean & Finish sanding sheet CF-SH, 158 mm x 224 mm, A VFN - 7100182599 cn: HAND SANDING PAD cn2: HAND SANDING PAD cn_clear: HANDSANDINGPAD d: Product description An abrasive mineral applied to a non-woven web structure is ideal for cleaning, blending, finishing and removing thin coats of paint and corrosion The deformable pad reaches corners and contoured surfaces for an even finish Can be folded, stacked or rolled for effective cleaning or conditioning of flat, irregular or shaped surfaces Open web structure prevents clogging; pad can be rinsed out and reused Open web structure prevents filling; pad can be rinsed out and re-used The Scotch-Brite Clean and Finish sheet has a deformable, non-woven web structure and different types of minerals for blending, cleaning and finishing. Due to their flexibility, our Clean and Finish sheets are great for hard-to-reach areas and to achieve an even finish. Use the Scotch Brite Clean and Finish sheet for effective cleaning, blending and conditioning of metal, wood, composites and advanced surfaces. Our Clean and Finish sheets are also suitable for paint preparation. Scotch Brite Clean and Finish multi-use sheets are useful for cabinets, woodworking, panelling, furniture, metal fabrication and primary processing of wood and panels. These non-woven sheets with an open web structure are washable and reusable. Because they are resistant to flooding, the result remains consistent throughout the life of the product. These 152.4 mm x 228.6 mm sheets can be used in several ways: manually for precise control, with a hand block for a uniform finish or on an orbital sander for larger areas. The sheets can be folded, stacked or rolled for effective cleaning or conditioning of flat, irregular or shaped surfaces. Scotch Brite Clean and Finish sheets are available with sanding minerals based on silicon carbide, aluminium oxide or talc. Silicon carbide is a very sharp synthetic mineral typically used in low-pressure applications such as paint preparation and finishing. Aluminium oxide is a hard, block-like mineral with a powerful cutting action and long life. Silicon carbide breaks down faster than alumina, but also provides a finer finish. Talc is a mild abrasive material used to achieve a matt-gloss finish. Together with polishing compound, it provides a high-gloss finish when polishing a top coat. Scotch-Brite abrasives are unique surface finishing products in which the abrasive is contained in a non-woven fibre matrix. The combination of abrasive with non-woven material creates an abrasive system that delivers consistent results throughout the life of the product. The material with an open web structure remains cool during use and is full-bodied. As a result, the fibres are less likely to clog and the abrasive minerals remain high performing. ds: dsc: kts: Clean & Finish sanding sheet CF-SH, 158 mm x 224 mm, A VFN kpn: 61089 kpn_dash: kpn_clear: 61089 bkpn: 3M - SCOTCH-BRITE 61089 bkpn_clear: 3M - SCOTCH-BRITE 61089 c_path: Home / Tools / Hand tools / Sanding, grinding and deburring tools / Sanding tools / Hand sanding pad | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite hand tools / 3m - scotch-brite sanding, grinding and deburring tools / 3m - scotch-brite sanding tools / 3m - scotch-brite hand sanding pad sr_no_br_cl_ns: 7100182599 sr_ns: 3M-SCOTCH-BRITE7100182599
r: 57110504 p: 18.14 pid: 43161 b: 3M - SCOTCH-BRITE q: 11 st: 1 lt: 1 ean: 03134375426589 sr: 3M - SCOTCH-BRITE 7100182463 sr_no_br: 7100182463 sr_no_br_cl: 7100182463 sr_cl: 3MSCOTCHBRITE7100182463 sr_dash: 3M sold: 471.64 p_range: none type: standard act: 1 avo: 1 av: Length 115 mm Width 150 mm Quantity per roll 35 n: 3M - SCOTCH-BRITE CF-SR Clean & Finish pre-perforated sanding roll, green, 150 mm x 115 mm, A VFN - 7100182463 cn: HAND SANDING PAD cn2: HAND SANDING PAD cn_clear: HANDSANDINGPAD d: Product description Superior alternative to steel wool, wire brushes, sandpaper, and other non-woven products for cleaning or finishing. Provides a good finish to sand primer, metal and solid surfaces. Suitable for wood, metal, plastic, ceramic, porcelain, glass, rubber, or composites Reusable pad resists tearing, splintering Can be folded for easier use 3M Scotch-Brite Clean & Finish Pre-cut Handpads CF-SR pre-cut on a roll combine flexibility with effective action and precise hand control, bringing difficult cleaning tasks to a successful conclusion or fine finish results every time. Aluminium oxide abrasive material with very fine coarseness cuts quickly and finely, delivering a smooth finish. Use Scotch-Brite Handpad pre-cut on a roll for a wide range of tasks and diverse materials. Our hand pads are supplied as a roll. For convenience, the roll is pre-cut at regular intervals. The pads provide fine finishing results after each use. They are a good alternative to steel wool, wire brushes, sandpaper and other non-woven products for difficult cleaning or finishing tasks. The pads offer a combination of flexibility with effective cutting action and precise hand use. Unlike steel wool, they do not fray or rust during or after use, nor do they leave fine metal chips. The hand pads are suitable for cleaning, finishing, granulating, getting rid of small imperfections and removing lint. Our very fine aluminium oxide-based abrasive material cuts quickly and finely, leaving a smooth surface with an excellent finish. The non-woven, open web material is resistant to flooding and can be used dry, with water or with solvents. After use, it can be rinsed out for reuse. The pads can be used manually with a sanding block for a uniform finish. For larger surfaces, they can be used on an orbital sander. Our Scotch-Brite industrial sanding products are unique surface finishing products where the sanding material is incorporated in non-woven nylon or other synthetic fibres. The combination of abrasive material in fibres creates an abrasive system that delivers consistent results throughout the life of the product. The open web material is full web resistant and keeps the abrasive minerals performing at a high level by reducing fibre clogging. The hand pads can be folded, stacked or rolled for effective cleaning or conditioning of flat, irregular or shaped surfaces. ds: dsc: kts: Clean & Finish pre-perforated sanding roll, green, 150 mm x 115 mm, A VFN kpn: CF-SR kpn_dash: CF kpn_clear: CFSR bkpn: 3M - SCOTCH-BRITE CF-SR bkpn_clear: 3M - SCOTCH-BRITE CFSR c_path: Home / Tools / Hand tools / Sanding, grinding and deburring tools / Sanding tools / Hand sanding pad | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite hand tools / 3m - scotch-brite sanding, grinding and deburring tools / 3m - scotch-brite sanding tools / 3m - scotch-brite hand sanding pad sr_no_br_cl_ns: 7100182463 sr_ns: 3M-SCOTCH-BRITE7100182463
r: 57941294 p: 57.685 pid: 36552 b: 3M - SCOTCH-BRITE q: 76 st: 1 lt: 1 ean: 04001895750373 sr: 3M - SCOTCH-BRITE 7100182512 sr_no_br: 7100182512 sr_no_br_cl: 7100182512 sr_cl: 3MSCOTCHBRITE7100182512 sr_dash: 3M sold: 346.11 p_range: none type: standard act: 1 avo: 1 av: Length 10 m Width 150 mm n: 3M - SCOTCH-BRITE 61111 Clean & Finish sanding roll CF-RL, 150 mm x 100 m, A VFN - 7100182512 cn: HAND SANDING PAD cn2: HAND SANDING PAD cn_clear: HANDSANDINGPAD d: Product description The roll can be cut to any length The deformable pad reaches even hard-to-reach areas Suitable for manual use or on polishers with vibration function and two pads The open web structure prevents clogging, for a consistent cutting action of the abrasive Suitable for metal, wood, composite and advanced materials The Scotch-Brite Clean and Finish roller offers consistent surface finish throughout the product's lifetime. Our Clean and Finish roll can be cut to any length. The Scotch Brite Clean and Finish roll delivers consistent results for finishing, blending, polishing and cleaning various metals, woods, plastic surfaces and hard-to-reach areas. Our malleable Clean and Finish rolls can be easily cut to any length. Due to their resistance to fulling, abrasive minerals remain on the surface, ensuring consistent cutting action. These rolls can be used manually for greater control. Larger-width material can be used in combination with a hand pad holder for a uniform finish. On an orbital or vibratory sander, it is great for larger areas. ds: dsc: kts: Clean & Finish sanding roll CF-RL, 150 mm x 100 m, A VFN kpn: 61111 kpn_dash: kpn_clear: 61111 bkpn: 3M - SCOTCH-BRITE 61111 bkpn_clear: 3M - SCOTCH-BRITE 61111 c_path: Home / Tools / Hand tools / Sanding, grinding and deburring tools / Sanding tools / Hand sanding pad | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite hand tools / 3m - scotch-brite sanding, grinding and deburring tools / 3m - scotch-brite sanding tools / 3m - scotch-brite hand sanding pad sr_no_br_cl_ns: 7100182512 sr_ns: 3M-SCOTCH-BRITE7100182512
r: 57111035 p: 2.3 pid: 45389 b: 3M - SCOTCH-BRITE q: 100 st: 1 lt: 1 ean: 4046719934645 sr: 3M - SCOTCH-BRITE 7100182600 sr_no_br: 7100182600 sr_no_br_cl: 7100182600 sr_cl: 3MSCOTCHBRITE7100182600 sr_dash: 3M sold: 338.1 p_range: none type: standard act: 1 avo: 1 av: Length 158 mm Width 224 mm n: 3M - SCOTCH-BRITE 7498 Clean & Finish sanding sheet CF-SH, 158 x 224 mm 3x20/CTN - 7100182600 cn: HAND SANDING PAD cn2: HAND SANDING PAD cn_clear: HANDSANDINGPAD d: Product description An abrasive mineral applied to a non-woven web structure is ideal for cleaning, blending, finishing and removing thin coats of paint and corrosion The deformable pad reaches corners and contoured surfaces for an even finish Can be folded, stacked or rolled for effective cleaning or conditioning of flat, irregular or shaped surfaces Open web structure prevents clogging; pad can be rinsed out and reused Open web structure prevents filling; pad can be rinsed out and re-used The Scotch-Brite Clean and Finish sheet has a deformable, non-woven web structure and different types of minerals for blending, cleaning and finishing. Due to their flexibility, our Clean and Finish sheets are great for hard-to-reach areas and to achieve an even finish. Use the Scotch Brite Clean and Finish sheet for effective cleaning, blending and conditioning of metal, wood, composites and advanced surfaces. Our Clean and Finish sheets are also suitable for paint preparation. Scotch Brite Clean and Finish multi-use sheets are useful for cabinets, woodworking, panelling, furniture, metal fabrication and primary processing of wood and panels. These non-woven sheets with an open web structure are washable and reusable. Because they are resistant to flooding, the result remains consistent throughout the life of the product. These 152.4 mm x 228.6 mm sheets can be used in several ways: manually for precise control, with a hand block for a uniform finish or on an orbital sander for larger areas. The sheets can be folded, stacked or rolled for effective cleaning or conditioning of flat, irregular or shaped surfaces. Scotch Brite Clean and Finish sheets are available with sanding minerals based on silicon carbide, aluminium oxide or talc. Silicon carbide is a very sharp synthetic mineral typically used in low-pressure applications such as paint preparation and finishing. Aluminium oxide is a hard, block-like mineral with a powerful cutting action and long life. Silicon carbide breaks down faster than alumina, but also provides a finer finish. Talc is a mild abrasive material used to achieve a matt-gloss finish. Together with polishing compound, it provides a high-gloss finish when polishing a top coat. Scotch-Brite abrasives are unique surface finishing products in which the abrasive is contained in a non-woven fibre matrix. The combination of abrasive with non-woven material creates an abrasive system that delivers consistent results throughout the life of the product. The material with an open web structure remains cool during use and is full-bodied. As a result, the fibres are less likely to clog and the abrasive minerals remain high performing. ds: dsc: kts: Clean & Finish sanding sheet CF-SH, 158 x 224 mm 3x20/CTN kpn: 7498 kpn_dash: kpn_clear: 7498 bkpn: 3M - SCOTCH-BRITE 7498 bkpn_clear: 3M - SCOTCH-BRITE 7498 c_path: Home / Tools / Hand tools / Sanding, grinding and deburring tools / Sanding tools / Hand sanding pad | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite hand tools / 3m - scotch-brite sanding, grinding and deburring tools / 3m - scotch-brite sanding tools / 3m - scotch-brite hand sanding pad sr_no_br_cl_ns: 7100182600 sr_ns: 3M-SCOTCH-BRITE7100182600
r: 57111040 p: 2.04 pid: 44711 b: 3M - SCOTCH-BRITE q: 300 st: 1 lt: 1 ean: 04046719934690 sr: 3M - SCOTCH-BRITE 7100182596 sr_no_br: 7100182596 sr_no_br_cl: 7100182596 sr_cl: 3MSCOTCHBRITE7100182596 sr_dash: 3M sold: 244.8 p_range: none type: standard act: 1 avo: 1 av: Length 158 mm Width 224 mm n: 3M - SCOTCH-BRITE 61150 Wear-resistant sanding sheet WR-SH, 158 mm x 224 mm A FIN - 7100182596 cn: HAND SANDING PAD cn2: HAND SANDING PAD cn_clear: HANDSANDINGPAD d: Product description Maintains workpiece geometry Use for efficient cleaning, finishing and light deburring Can be used for machine and manual applications Provide a matt-gloss finish on metal Scotch-Brite Wear-resistant sheets are designed for cleaning, finishing and light deburring. Our sheets are suitable for use in machine and manual applications. Use Scotch-Brite Wear-resistant sheets for cleaning, finishing and light deburring. Our sheets do not change the geometry of the workpiece and can be used in machine and manual applications. ds: dsc: kts: Wear-resistant sanding sheet WR-SH, 158 mm x 224 mm A FIN kpn: 61150 kpn_dash: kpn_clear: 61150 bkpn: 3M - SCOTCH-BRITE 61150 bkpn_clear: 3M - SCOTCH-BRITE 61150 c_path: Home / Tools / Hand tools / Sanding, grinding and deburring tools / Sanding tools / Hand sanding pad | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite hand tools / 3m - scotch-brite sanding, grinding and deburring tools / 3m - scotch-brite sanding tools / 3m - scotch-brite hand sanding pad sr_no_br_cl_ns: 7100182596 sr_ns: 3M-SCOTCH-BRITE7100182596
r: 57110395 p: 3.89 pid: 41001 b: 3M - SCOTCH-BRITE q: 142 st: 1 lt: 1 ean: 54046719934336 sr: 3M - SCOTCH-BRITE 7100182601 sr_no_br: 7100182601 sr_no_br_cl: 7100182601 sr_cl: 3MSCOTCHBRITE7100182601 sr_dash: 3M sold: 233.4 p_range: none type: standard act: 1 avo: 1 av: Length 158 mm Width 224 mm n: 3M - SCOTCH-BRITE 7440 Cut & Polish hand pad 158 mm x 224 mm, A MED - 7100182601 cn: HAND SANDING PAD cn2: HAND SANDING PAD cn_clear: HANDSANDINGPAD d: Product description High-density structure allows aggressive blending, cleaning and polishing of metal surfaces Flood-resistant design ensures consistent performance across the sheet Malleable and soft for an even finish Flexible to treat even hard-to-reach areas Highly durable material ensures long life The Scotch-Brite Cut and Polish sheet features a stiff, tight and dense web structure that is malleable. This allows it to adapt to unique contours and hard-to-reach areas. Our Cut and Polish sheets can be used manually or attached to an orbital sander for metalworking, paint preparation or removal of coatings and rust. Use the Scotch-Brite Cut and Polish Sheet for aggressive blending and finishing. Our Cut and Polish sheets can be used to manually clean and polish inside diameters or can be attached to an orbital sander for tougher tasks - including metalworking, paint preparation and rust removal. These sheets use aluminium oxide abrasive minerals. This strong, durable mineral self-degrades during use so that new cutting edges keep appearing - whereas traditional natural abrasive grains blunt faster. Because of its high cutting speed, hardness and strength, it is widely used in grinding, sanding and finishing applications. Aluminium oxide is suitable for numerous materials in both wood and metalworking, including ferroalloys. Scotch-Brite abrasives consist of unique surface treatment products containing abrasive minerals in a non-woven fibre layer. Combining abrasive minerals with non-woven material creates an abrasive system that delivers consistent results throughout the life of the product. The open web material remains cool during use and is full-flow resistant. As a result, the fibres are less likely to clog and the abrasive minerals maintain high performance. Suggested applications Can be used manually or attached to an orbital sander for metalworking, paint preparation or removal of coatings and rust ds: dsc: kts: Cut & Polish hand pad 158 mm x 224 mm, A MED kpn: 7440 kpn_dash: kpn_clear: 7440 bkpn: 3M - SCOTCH-BRITE 7440 bkpn_clear: 3M - SCOTCH-BRITE 7440 c_path: Home / Tools / Hand tools / Sanding, grinding and deburring tools / Sanding tools / Hand sanding pad | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite hand tools / 3m - scotch-brite sanding, grinding and deburring tools / 3m - scotch-brite sanding tools / 3m - scotch-brite hand sanding pad sr_no_br_cl_ns: 7100182601 sr_ns: 3M-SCOTCH-BRITE7100182601
r: 57111075 p: 58.347 pid: 45390 b: 3M - SCOTCH-BRITE q: 0 st: lt: 8 ean: 04001895764745 sr: 3M - SCOTCH-BRITE 7100182509 sr_no_br: 7100182509 sr_no_br_cl: 7100182509 sr_cl: 3MSCOTCHBRITE7100182509 sr_dash: 3M sold: 233.388 p_range: none type: standard act: 1 avo: 1 av: Length 10 m Width 125 mm n: 3M - SCOTCH-BRITE 61141 Wear-resistant sanding roll WR-RL, 125 mm x 10 m, A VFN - 7100182509 cn: HAND SANDING PAD cn2: HAND SANDING PAD cn_clear: HANDSANDINGPAD d: Product description Versatile for use on various substrates Does not change the geometry of the workpiece Can be used for cleaning, finishing and light deburring Suitable for machine and manual applications Scotch-Brite Wear-resistant rollers are designed for machine and manual applications. Use our rollers for cleaning, finishing and light deburring. Use Scotch-Brite Wear-resistant roller for efficient cleaning, finishing and light deburring. Our versatile rollers can be used in machine or manual applications. Choose from grooves suitable for touching up brushed stainless steel and aluminium surfaces, mat finishing metal, light stain removal, tool cleaning. The rollers can be used for cleaning sensitive surfaces, to achieve a brushed matt effect, or for roughening painted surfaces before repainting. They can be applied after a first coat of lacquer, for intermediate sanding and also for gluing. ds: dsc: kts: Wear-resistant sanding roll WR-RL, 125 mm x 10 m, A VFN kpn: 61141 kpn_dash: kpn_clear: 61141 bkpn: 3M - SCOTCH-BRITE 61141 bkpn_clear: 3M - SCOTCH-BRITE 61141 c_path: Home / Tools / Hand tools / Sanding, grinding and deburring tools / Sanding tools / Hand sanding pad | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite hand tools / 3m - scotch-brite sanding, grinding and deburring tools / 3m - scotch-brite sanding tools / 3m - scotch-brite hand sanding pad sr_no_br_cl_ns: 7100182509 sr_ns: 3M-SCOTCH-BRITE7100182509
r: 57111033 p: 1.87 pid: 45384 b: 3M - SCOTCH-BRITE q: 0 st: lt: 10 ean: 00048011650562 sr: 3M - SCOTCH-BRITE 7100082599 sr_no_br: 7100082599 sr_no_br_cl: 7100082599 sr_cl: 3MSCOTCHBRITE7100082599 sr_dash: 3M sold: 224.4 p_range: none type: standard act: 1 avo: 1 av: Length 152 mm Width 228 mm n: 3M - SCOTCH-BRITE 7446 blending handpad 152 mm x 228 mm, S MED - 7100082599 cn: HAND SANDING PAD cn2: HAND SANDING PAD cn_clear: HANDSANDINGPAD d: Product description Universal hand pad for manual blending and finishing on metals, wood and other materials Flexible material for blending scratches on irregular surfaces without affecting the shape of the workpiece Offers comparable performance to steel wool grade 3 without leaving cracks, rust or splinters Suitable for woodworking, paint preparation, sealer sanding and for sanding between coats Combination of non-woven construction and abrasive grains ensure consistent cutting power throughout the life of the reusable pad Scotch-Brite Blending Hand Pad 7446 uses an open, aggressive web for effective manual blending, general cleaning, preparation and finishing. The flexible material adapts to both flat and irregular contours without affecting the shape of the base material. Unlike steel wool, the Blending Handpad will not crack during use, rust after use, or leave fine metal splinters. ds: dsc: kts: blending handpad 152 mm x 228 mm, S MED kpn: 7446 kpn_dash: kpn_clear: 7446 bkpn: 3M - SCOTCH-BRITE 7446 bkpn_clear: 3M - SCOTCH-BRITE 7446 c_path: Home / Tools / Hand tools / Sanding, grinding and deburring tools / Sanding tools / Hand sanding pad | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite hand tools / 3m - scotch-brite sanding, grinding and deburring tools / 3m - scotch-brite sanding tools / 3m - scotch-brite hand sanding pad sr_no_br_cl_ns: 7100082599 sr_ns: 3M-SCOTCH-BRITE7100082599
r: 57111068 p: 53.553 pid: 45380 b: 3M - SCOTCH-BRITE q: 0 st: lt: 8 ean: 03134375441100 sr: 3M - SCOTCH-BRITE 7100182470 sr_no_br: 7100182470 sr_no_br_cl: 7100182470 sr_cl: 3MSCOTCHBRITE7100182470 sr_dash: 3M sold: 214.212 p_range: none type: standard act: 1 avo: 1 av: Length 10 m Width 115 mm n: 3M - SCOTCH-BRITE 44110 Wear-resistant sanding roll WR-RL, 115 mm x 10 m, S VFN - 7100182470 cn: HAND SANDING PAD cn2: HAND SANDING PAD cn_clear: HANDSANDINGPAD d: Product description Versatile for use on various substrates Does not change the geometry of the workpiece Can be used for cleaning, finishing and light deburring Suitable for machine and manual applications Scotch-Brite Wear-resistant rollers are designed for machine and manual applications. Use our rollers for cleaning, finishing and light deburring. Use Scotch-Brite Wear-resistant roller for efficient cleaning, finishing and light deburring. Our versatile rollers can be used in machine or manual applications. Choose from grooves suitable for touching up brushed stainless steel and aluminium surfaces, mat finishing metal, light stain removal, tool cleaning. The rollers can be used for cleaning sensitive surfaces, to achieve a brushed matt effect, or for roughening painted surfaces before repainting. They can be applied after a first coat of lacquer, for intermediate sanding and also for gluing. ds: dsc: kts: Wear-resistant sanding roll WR-RL, 115 mm x 10 m, S VFN kpn: 44110 kpn_dash: kpn_clear: 44110 bkpn: 3M - SCOTCH-BRITE 44110 bkpn_clear: 3M - SCOTCH-BRITE 44110 c_path: Home / Tools / Hand tools / Sanding, grinding and deburring tools / Sanding tools / Hand sanding pad | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite hand tools / 3m - scotch-brite sanding, grinding and deburring tools / 3m - scotch-brite sanding tools / 3m - scotch-brite hand sanding pad sr_no_br_cl_ns: 7100182470 sr_ns: 3M-SCOTCH-BRITE7100182470
