r: 57110396 p: 74.049 pid: 41607 b: 3M - SCOTCH-BRITE q: 0 st: lt: 8 ean: 00048011187624 sr: 3M - SCOTCH-BRITE 7000028488 sr_no_br: 7000028488 sr_no_br_cl: 7000028488 sr_cl: 3MSCOTCHBRITE7000028488 sr_dash: 3M sold: 444.294 p_range: none act: 1 avo: 1 av: Diameter 152 mm Bore size 25 mm Width 25 mm n: 3M - SCOTCH-BRITE 18762 Deburring wheel DB-WL, red, 152 mm x 25 mm x 25 mm, 9S FIN - 7000028488 cn: GRINDING WHEEL cn2: GRINDING WHEEL cn_clear: GRINDINGWHEEL d: Product description Hard flexible wheel is highly effective in deburring without damaging the workpiece Wrapped construction ensures the wheel runs smoothly, helping to produce consistent results Scotch-Brite non-woven material resists clogging and continuously exposes new abrasive grains for continuous cutting power Minimises heat build-up to reduce the risk of discolouration and warping on heat-sensitive substrates Effective for all types of metals, composites, and glass, with one wheel able to handle more tasks When you need an aggressive wheel for different deburring tasks, our Scotch-Brite Deburring Wheel is a good place to start. This silicon carbide wheel offers hard density in both medium and fine grades for light to medium deburring of edges on carbon steel, stainless steel, titanium; also on soft metals such as aluminium, copper and brass as well as composites, plastics and glass. Use our hard, aggressive Scotch-Brite Deburring Wheel for all kinds of deburring tasks and surfaces. Our silicon carbide wheels offer high density (11), in medium and fine coarseness. They are effective at light to medium edge deburring on carbon steel, stainless steel, titanium and soft metals The twisted and non-woven design of our Scotch-Brite deburring wheels provides consistent abrasive performance on flat or irregular surfaces throughout the life of the wheel. Our wheels are hard and durable, making them ideal for deburring pressed or laser-cut parts, cleaning or finishing after belt sanding, reducing grooves in the base material. They offer a superior finish, which may eliminate the need for further finishing steps. They use an extra sharp silicon carbide abrasive grain, a synthetic material typically used in low-pressure applications, such as finishing and paint preparation. Silicon carbide breaks down faster than alumina, and gives a finer finish. The open web material stays cool in use and is full-bodied, preventing fibre clogging. Combined with the continuous breaking down of the fibres in the web exposing new minerals, this ensures a continuously high cutting performance of the minerals. This results in an extremely long tool life. Scotch-Brite industrial abrasives are unique surface conditioning products consisting of abrasive grains embedded in non-woven nylon or synthetic fibres. Because abrasive grains are combined with fibres in this way, an abrasive system is created that delivers consistent results throughout the product life. Use Scotch-Brite products to improve productivity while reducing the use of stripping chemicals and wire brushes. From aesthetic finishing to blending welds, deburring and more, they work quickly and deliver consistent results, part after part. Suggested applications Use for numerous deburring tasks Suitable for light to medium edge deburring on carbon steel, stainless steel and titanium For use on soft materials such as aluminium, red and yellow copper, composites, plastics and glass ds: dsc: kts: Deburring wheel DB-WL, red, 152 mm x 25 mm x 25 mm, 9S FIN kpn: 18762 kpn_dash: kpn_clear: 18762 bkpn: 3M - SCOTCH-BRITE 18762 bkpn_clear: 3M - SCOTCH-BRITE 18762 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Grinding wheel | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite machining tools / 3m - scotch-brite surface treatment / 3m - scotch-brite sanding, sharpening, polishing and deburring / 3m - scotch-brite grinding wheel sr_no_br_cl_ns: 7000028488 sr_ns: 3M-SCOTCH-BRITE7000028488
r: 57110397 p: 222.148 pid: 43108 b: 3M - SCOTCH-BRITE q: 0 st: lt: 8 ean: 00048011187679 sr: 3M - SCOTCH-BRITE 7000046088 sr_no_br: 7000046088 sr_no_br_cl: 7000046088 sr_cl: 3MSCOTCHBRITE7000046088 sr_dash: 3M sold: 0 p_range: none act: 1 avo: 1 av: Diameter 203 mm Bore size 76 mm Width 51 mm n: 3M - SCOTCH-BRITE 18767 Deburring wheel DB-WL, red, 203 mm x 50 mm x 76 mm, 9S FIN - 7000046088 cn: GRINDING WHEEL cn2: GRINDING WHEEL cn_clear: GRINDINGWHEEL d: Product description Hard flexible wheel is highly effective in deburring without damaging the workpiece Wrapped construction ensures the wheel runs smoothly, helping to produce consistent results Scotch-Brite non-woven material resists clogging and continuously exposes new abrasive grains for continuous cutting power Minimises heat build-up to reduce the risk of discolouration and warping on heat-sensitive substrates Effective for all types of metals, composites, and glass, with one wheel able to handle more tasks When you need an aggressive wheel for different deburring tasks, our Scotch-Brite Deburring Wheel is a good place to start. This silicon carbide wheel offers hard density in both medium and fine grades for light to medium deburring of edges on carbon steel, stainless steel, titanium; also on soft metals such as aluminium, copper and brass as well as composites, plastics and glass. Use our hard, aggressive Scotch-Brite Deburring Wheel for all kinds of deburring tasks and surfaces. Our silicon carbide wheels offer high density (11), in medium and fine coarseness. They are effective at light to medium edge deburring on carbon steel, stainless steel, titanium and soft metals The twisted and non-woven design of our Scotch-Brite deburring wheels provides consistent abrasive performance on flat or irregular surfaces throughout the life of the wheel. Our wheels are hard and durable, making them ideal for deburring pressed or laser-cut parts, cleaning or finishing after belt sanding, reducing grooves in the base material. They offer a superior finish, which may eliminate the need for further finishing steps. They use an extra sharp silicon carbide abrasive grain, a synthetic material typically used in low-pressure applications, such as finishing and paint preparation. Silicon carbide breaks down faster than alumina, and gives a finer finish. The open web material stays cool in use and is full-bodied, preventing fibre clogging. Combined with the continuous breaking down of the fibres in the web exposing new minerals, this ensures a continuously high cutting performance of the minerals. This results in an extremely long tool life. Scotch-Brite industrial abrasives are unique surface conditioning products consisting of abrasive grains embedded in non-woven nylon or synthetic fibres. Because abrasive grains are combined with fibres in this way, an abrasive system is created that delivers consistent results throughout the product life. Use Scotch-Brite products to improve productivity while reducing the use of stripping chemicals and wire brushes. From aesthetic finishing to blending welds, deburring and more, they work quickly and deliver consistent results, part after part. Suggested applications Use for numerous deburring tasks Suitable for light to medium edge deburring on carbon steel, stainless steel and titanium For use on soft materials such as aluminium, red and yellow copper, composites, plastics and glass ds: dsc: kts: Deburring wheel DB-WL, red, 203 mm x 50 mm x 76 mm, 9S FIN kpn: 18767 kpn_dash: kpn_clear: 18767 bkpn: 3M - SCOTCH-BRITE 18767 bkpn_clear: 3M - SCOTCH-BRITE 18767 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Grinding wheel | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite machining tools / 3m - scotch-brite surface treatment / 3m - scotch-brite sanding, sharpening, polishing and deburring / 3m - scotch-brite grinding wheel | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Grinding wheel sr_no_br_cl_ns: 7000046088 sr_ns: 3M-SCOTCH-BRITE7000046088
r: 57111122 p: 197.355 pid: 45393 b: 3M - SCOTCH-BRITE q: 0 st: lt: 8 ean: 00048011187662 sr: 3M - SCOTCH-BRITE 7000028490 sr_no_br: 7000028490 sr_no_br_cl: 7000028490 sr_cl: 3MSCOTCHBRITE7000028490 sr_dash: 3M sold: 0 p_range: none act: 1 avo: 1 av: Diameter 203,2 mm Bore size 76,2 mm Width 50,8 mm n: 3M - SCOTCH-BRITE 18766 Deburring wheel DB-WL, red, 203 mm x 50 mm x 76 mm, 8S MED - 7000028490 cn: GRINDING WHEEL cn2: GRINDING WHEEL cn_clear: GRINDINGWHEEL d: Product description Hard flexible wheel is highly effective in deburring without damaging the workpiece Wrapped construction ensures the wheel runs smoothly, helping to produce consistent results Scotch-Brite non-woven material resists clogging and continuously exposes new abrasive grains for continuous cutting power Minimises heat build-up to reduce the risk of discolouration and warping on heat-sensitive substrates Effective for all types of metals, composites, and glass, with one wheel able to handle more tasks When you need an aggressive wheel for different deburring tasks, our Scotch-Brite Deburring Wheel is a good place to start. This silicon carbide wheel offers hard density in both medium and fine grades for light to medium deburring of edges on carbon steel, stainless steel, titanium; also on soft metals such as aluminium, copper and brass as well as composites, plastics and glass. Use our hard, aggressive Scotch-Brite Deburring Wheel for all kinds of deburring tasks and surfaces. Our silicon carbide wheels offer high density (11), in medium and fine coarseness. They are effective at light to medium edge deburring on carbon steel, stainless steel, titanium and soft metals The twisted and non-woven design of our Scotch-Brite deburring wheels provides consistent abrasive performance on flat or irregular surfaces throughout the life of the wheel. Our wheels are hard and durable, making them ideal for deburring pressed or laser-cut parts, cleaning or finishing after belt sanding, reducing grooves in the base material. They offer a superior finish, which may eliminate the need for further finishing steps. They use an extra sharp silicon carbide abrasive grain, a synthetic material typically used in low-pressure applications, such as finishing and paint preparation. Silicon carbide breaks down faster than alumina, and gives a finer finish. The open web material stays cool in use and is full-bodied, preventing fibre clogging. Combined with the continuous breaking down of the fibres in the web exposing new minerals, this ensures a continuously high cutting performance of the minerals. This results in an extremely long tool life. Scotch-Brite industrial abrasives are unique surface conditioning products consisting of abrasive grains embedded in non-woven nylon or synthetic fibres. Because abrasive grains are combined with fibres in this way, an abrasive system is created that delivers consistent results throughout the product life. Use Scotch-Brite products to improve productivity while reducing the use of stripping chemicals and wire brushes. From aesthetic finishing to blending welds, deburring and more, they work quickly and deliver consistent results, part after part. Suggested applications Use for numerous deburring tasks Suitable for light to medium edge deburring on carbon steel, stainless steel and titanium For use on soft materials such as aluminium, red and yellow copper, composites, plastics and glass ds: dsc: kts: Deburring wheel DB-WL, red, 203 mm x 50 mm x 76 mm, 8S MED kpn: 18766 kpn_dash: kpn_clear: 18766 bkpn: 3M - SCOTCH-BRITE 18766 bkpn_clear: 3M - SCOTCH-BRITE 18766 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Grinding wheel | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite machining tools / 3m - scotch-brite surface treatment / 3m - scotch-brite sanding, sharpening, polishing and deburring / 3m - scotch-brite grinding wheel | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Grinding wheel sr_no_br_cl_ns: 7000028490 sr_ns: 3M-SCOTCH-BRITE7000028490
r: 57110399 p: 180.826 pid: 41656 b: 3M - SCOTCH-BRITE q: 8 st: 1 lt: 1 ean: 00048011187716 sr: 3M - SCOTCH-BRITE 7000028493 sr_no_br: 7000028493 sr_no_br_cl: 7000028493 sr_cl: 3MSCOTCHBRITE7000028493 sr_dash: 3M sold: 0 p_range: none act: 1 avo: 1 av: Diameter 203,2 mm Bore size 76,2 mm Width 50,8 mm n: 3M - SCOTCH-BRITE 18771 Deburring wheel DB-WL, red, 203 mm x 50 mm x 76 mm, 7S FIN - 7000028493 cn: GRINDING WHEEL cn2: GRINDING WHEEL cn_clear: GRINDINGWHEEL d: Product description Hard flexible wheel is highly effective in deburring without damaging the workpiece Wrapped construction ensures the wheel runs smoothly, helping to produce consistent results Scotch-Brite non-woven material resists clogging and continuously exposes new abrasive grains for continuous cutting power Minimises heat build-up to reduce the risk of discolouration and warping on heat-sensitive substrates Effective for all types of metals, composites, and glass, with one wheel able to handle more tasks When you need an aggressive wheel for different deburring tasks, our Scotch-Brite Deburring Wheel is a good place to start. This silicon carbide wheel offers hard density in both medium and fine grades for light to medium deburring of edges on carbon steel, stainless steel, titanium; also on soft metals such as aluminium, copper and brass as well as composites, plastics and glass. Use our hard, aggressive Scotch-Brite Deburring Wheel for all kinds of deburring tasks and surfaces. Our silicon carbide wheels offer high density (11), in medium and fine coarseness. They are effective at light to medium edge deburring on carbon steel, stainless steel, titanium and soft metals The twisted and non-woven design of our Scotch-Brite deburring wheels provides consistent abrasive performance on flat or irregular surfaces throughout the life of the wheel. Our wheels are hard and durable, making them ideal for deburring pressed or laser-cut parts, cleaning or finishing after belt sanding, reducing grooves in the base material. They offer a superior finish, which may eliminate the need for further finishing steps. They use an extra sharp silicon carbide abrasive grain, a synthetic material typically used in low-pressure applications, such as finishing and paint preparation. Silicon carbide breaks down faster than alumina, and gives a finer finish. The open web material stays cool in use and is full-bodied, preventing fibre clogging. Combined with the continuous breaking down of the fibres in the web exposing new minerals, this ensures a continuously high cutting performance of the minerals. This results in an extremely long tool life. Scotch-Brite industrial abrasives are unique surface conditioning products consisting of abrasive grains embedded in non-woven nylon or synthetic fibres. Because abrasive grains are combined with fibres in this way, an abrasive system is created that delivers consistent results throughout the product life. Use Scotch-Brite products to improve productivity while reducing the use of stripping chemicals and wire brushes. From aesthetic finishing to blending welds, deburring and more, they work quickly and deliver consistent results, part after part. Suggested applications Use for numerous deburring tasks Suitable for light to medium edge deburring on carbon steel, stainless steel and titanium For use on soft materials such as aluminium, red and yellow copper, composites, plastics and glass ds: dsc: kts: Deburring wheel DB-WL, red, 203 mm x 50 mm x 76 mm, 7S FIN kpn: 18771 kpn_dash: kpn_clear: 18771 bkpn: 3M - SCOTCH-BRITE 18771 bkpn_clear: 3M - SCOTCH-BRITE 18771 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Grinding wheel | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite machining tools / 3m - scotch-brite surface treatment / 3m - scotch-brite sanding, sharpening, polishing and deburring / 3m - scotch-brite grinding wheel | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Grinding wheel sr_no_br_cl_ns: 7000028493 sr_ns: 3M-SCOTCH-BRITE7000028493
r: 57110516 p: 122.975 pid: 41053 b: 3M - SCOTCH-BRITE q: 0 st: lt: 8 ean: 00048011187648 sr: 3M - SCOTCH-BRITE 7000046086 sr_no_br: 7000046086 sr_no_br_cl: 7000046086 sr_cl: 3MSCOTCHBRITE7000046086 sr_dash: 3M sold: 0 p_range: none act: 1 avo: 1 av: Diameter 203 mm Bore size 76 mm Width 25 mm n: 3M - SCOTCH-BRITE 18764 Deburring wheel DB-WL, red, 203 mm x 25 mm x 76 mm, 9S FIN - 7000046086 cn: GRINDING WHEEL cn2: GRINDING WHEEL cn_clear: GRINDINGWHEEL d: Product description Hard flexible wheel is highly effective in deburring without damaging the workpiece Wrapped construction ensures the wheel runs smoothly, helping to produce consistent results Scotch-Brite non-woven material resists clogging and continuously exposes new abrasive grains for continuous cutting power Minimises heat build-up to reduce the risk of discolouration and warping on heat-sensitive substrates Effective for all types of metals, composites, and glass, with one wheel able to handle more tasks When you need an aggressive wheel for different deburring tasks, our Scotch-Brite Deburring Wheel is a good place to start. This silicon carbide wheel offers hard density in both medium and fine grades for light to medium deburring of edges on carbon steel, stainless steel, titanium; also on soft metals such as aluminium, copper and brass as well as composites, plastics and glass. Use our hard, aggressive Scotch-Brite Deburring Wheel for all kinds of deburring tasks and surfaces. Our silicon carbide wheels offer high density (11), in medium and fine coarseness. They are effective at light to medium edge deburring on carbon steel, stainless steel, titanium and soft metals The twisted and non-woven design of our Scotch-Brite deburring wheels provides consistent abrasive performance on flat or irregular surfaces throughout the life of the wheel. Our wheels are hard and durable, making them ideal for deburring pressed or laser-cut parts, cleaning or finishing after belt sanding, reducing grooves in the base material. They offer a superior finish, which may eliminate the need for further finishing steps. They use an extra sharp silicon carbide abrasive grain, a synthetic material typically used in low-pressure applications, such as finishing and paint preparation. Silicon carbide breaks down faster than alumina, and gives a finer finish. The open web material stays cool in use and is full-bodied, preventing fibre clogging. Combined with the continuous breaking down of the fibres in the web exposing new minerals, this ensures a continuously high cutting performance of the minerals. This results in an extremely long tool life. Scotch-Brite industrial abrasives are unique surface conditioning products consisting of abrasive grains embedded in non-woven nylon or synthetic fibres. Because abrasive grains are combined with fibres in this way, an abrasive system is created that delivers consistent results throughout the product life. Use Scotch-Brite products to improve productivity while reducing the use of stripping chemicals and wire brushes. From aesthetic finishing to blending welds, deburring and more, they work quickly and deliver consistent results, part after part. Suggested applications Use for numerous deburring tasks Suitable for light to medium edge deburring on carbon steel, stainless steel and titanium For use on soft materials such as aluminium, red and yellow copper, composites, plastics and glass ds: dsc: kts: Deburring wheel DB-WL, red, 203 mm x 25 mm x 76 mm, 9S FIN kpn: 18764 kpn_dash: kpn_clear: 18764 bkpn: 3M - SCOTCH-BRITE 18764 bkpn_clear: 3M - SCOTCH-BRITE 18764 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Grinding wheel | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite machining tools / 3m - scotch-brite surface treatment / 3m - scotch-brite sanding, sharpening, polishing and deburring / 3m - scotch-brite grinding wheel | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Grinding wheel sr_no_br_cl_ns: 7000046086 sr_ns: 3M-SCOTCH-BRITE7000046086
r: 57111121 p: 122.975 pid: 45416 b: 3M - SCOTCH-BRITE q: 0 st: lt: 8 ean: 00048011187631 sr: 3M - SCOTCH-BRITE 7000046085 sr_no_br: 7000046085 sr_no_br_cl: 7000046085 sr_cl: 3MSCOTCHBRITE7000046085 sr_dash: 3M sold: 0 p_range: none act: 1 avo: 1 av: Diameter 203,2 mm Bore size 76,2 mm Width 25,4 mm n: 3M - SCOTCH-BRITE 18763 Deburring wheel DB-WL, red, 203 mm x 25 mm x 76 mm, 8S MED - 7000046085 cn: GRINDING WHEEL cn2: GRINDING WHEEL cn_clear: GRINDINGWHEEL d: Product description Hard flexible wheel is highly effective in deburring without damaging the workpiece Wrapped construction ensures the wheel runs smoothly, helping to produce consistent results Scotch-Brite non-woven material resists clogging and continuously exposes new abrasive grains for continuous cutting power Minimises heat build-up to reduce the risk of discolouration and warping on heat-sensitive substrates Effective for all types of metals, composites, and glass, with one wheel able to handle more tasks When you need an aggressive wheel for different deburring tasks, our Scotch-Brite Deburring Wheel is a good place to start. This silicon carbide wheel offers hard density in both medium and fine grades for light to medium deburring of edges on carbon steel, stainless steel, titanium; also on soft metals such as aluminium, copper and brass as well as composites, plastics and glass. Use our hard, aggressive Scotch-Brite Deburring Wheel for all kinds of deburring tasks and surfaces. Our silicon carbide wheels offer high density (11), in medium and fine coarseness. They are effective at light to medium edge deburring on carbon steel, stainless steel, titanium and soft metals The twisted and non-woven design of our Scotch-Brite deburring wheels provides consistent abrasive performance on flat or irregular surfaces throughout the life of the wheel. Our wheels are hard and durable, making them ideal for deburring pressed or laser-cut parts, cleaning or finishing after belt sanding, reducing grooves in the base material. They offer a superior finish, potentially eliminating the need for further finishing steps. They use an extra sharp silicon carbide abrasive grain, a synthetic material typically used in low-pressure applications, such as finishing and paint preparation. Silicon carbide breaks down faster than alumina, and gives a finer finish. The open web material stays cool in use and is full-bodied, preventing fibre clogging. Combined with the continuous breaking down of the fibres in the web exposing new minerals, this ensures a continuously high cutting performance of the minerals. This results in an extremely long tool life. Scotch-Brite industrial abrasives are unique surface conditioning products consisting of abrasive grains embedded in non-woven nylon or synthetic fibres. Because abrasive grains are combined with fibres in this way, an abrasive system is created that delivers consistent results throughout the product life. Use Scotch-Brite products to improve productivity while reducing the use of stripping chemicals and wire brushes. From aesthetic finishing to blending welds, deburring and more, they work quickly and deliver consistent results, part after part. Suggested applications Use for numerous deburring tasks Suitable for light to medium edge deburring on carbon steel, stainless steel and titanium For use on soft materials such as aluminium, red and yellow copper, composites, plastics and glass ds: dsc: kts: Deburring wheel DB-WL, red, 203 mm x 25 mm x 76 mm, 8S MED kpn: 18763 kpn_dash: kpn_clear: 18763 bkpn: 3M - SCOTCH-BRITE 18763 bkpn_clear: 3M - SCOTCH-BRITE 18763 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Grinding wheel | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite machining tools / 3m - scotch-brite surface treatment / 3m - scotch-brite sanding, sharpening, polishing and deburring / 3m - scotch-brite grinding wheel | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Grinding wheel sr_no_br_cl_ns: 7000046085 sr_ns: 3M-SCOTCH-BRITE7000046085
r: 57111123 p: 114.71 pid: 44732 b: 3M - SCOTCH-BRITE q: 0 st: lt: 5 ean: 00048011187693 sr: 3M - SCOTCH-BRITE 7000046089 sr_no_br: 7000046089 sr_no_br_cl: 7000046089 sr_cl: 3MSCOTCHBRITE7000046089 sr_dash: 3M sold: 0 p_range: none act: 1 avo: 1 av: Diameter 203,2 mm Bore size 76,2 mm Width 25,4 mm n: 3M - SCOTCH-BRITE 18769 Deburring wheel DB-WL, red, 203 mm x 25 mm x 76 mm, 7S FIN - 7000046089 cn: GRINDING WHEEL cn2: GRINDING WHEEL cn_clear: GRINDINGWHEEL d: Product description Hard flexible wheel is highly effective in deburring without damaging the workpiece Wrapped construction ensures the wheel runs smoothly, helping to produce consistent results Scotch-Brite non-woven material resists clogging and continuously exposes new abrasive grains for continuous cutting power Minimises heat build-up to reduce the risk of discolouration and warping on heat-sensitive substrates Effective for all types of metals, composites, and glass, with one wheel able to handle more tasks When you need an aggressive wheel for different deburring tasks, our Scotch-Brite Deburring Wheel is a good place to start. This silicon carbide wheel offers hard density in both medium and fine grades for light to medium deburring of edges on carbon steel, stainless steel, titanium; also on soft metals such as aluminium, copper and brass as well as composites, plastics and glass. Use our hard, aggressive Scotch-Brite Deburring Wheel for all kinds of deburring tasks and surfaces. Our silicon carbide wheels offer high density (11), in medium and fine coarseness. They are effective at light to medium edge deburring on carbon steel, stainless steel, titanium and soft metals The twisted and non-woven design of our Scotch-Brite deburring wheels provides consistent abrasive performance on flat or irregular surfaces throughout the life of the wheel. Our wheels are hard and durable, making them ideal for deburring pressed or laser-cut parts, cleaning or finishing after belt sanding, reducing grooves in the base material. They offer a superior finish, which may eliminate the need for further finishing steps. They use an extra sharp silicon carbide abrasive grain, a synthetic material typically used in low-pressure applications, such as finishing and paint preparation. Silicon carbide breaks down faster than alumina, and gives a finer finish. The open web material stays cool in use and is full-bodied, preventing fibre clogging. Combined with the continuous breaking down of the fibres in the web exposing new minerals, this ensures a continuously high cutting performance of the minerals. This results in an extremely long tool life. Scotch-Brite industrial abrasives are unique surface conditioning products consisting of abrasive grains embedded in non-woven nylon or synthetic fibres. Because abrasive grains are combined with fibres in this way, it creates an abrasive system that delivers consistent results throughout the product life. Use Scotch-Brite products to improve productivity while reducing the use of stripping chemicals and wire brushes. From aesthetic finishing to blending welds, deburring and more, they work quickly and deliver consistent results, part after part. Suggested applications Use for numerous deburring tasks Suitable for light to medium edge deburring on carbon steel, stainless steel and titanium For use on soft materials such as aluminium, red and yellow copper, composites, plastics and glass ds: dsc: kts: Deburring wheel DB-WL, red, 203 mm x 25 mm x 76 mm, 7S FIN kpn: 18769 kpn_dash: kpn_clear: 18769 bkpn: 3M - SCOTCH-BRITE 18769 bkpn_clear: 3M - SCOTCH-BRITE 18769 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Grinding wheel | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite machining tools / 3m - scotch-brite surface treatment / 3m - scotch-brite sanding, sharpening, polishing and deburring / 3m - scotch-brite grinding wheel | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Grinding wheel sr_no_br_cl_ns: 7000046089 sr_ns: 3M-SCOTCH-BRITE7000046089
r: 57111120 p: 89.917 pid: 47072 b: 3M - SCOTCH-BRITE q: 0 st: lt: 8 ean: 00048011187617 sr: 3M - SCOTCH-BRITE 7000028487 sr_no_br: 7000028487 sr_no_br_cl: 7000028487 sr_cl: 3MSCOTCHBRITE7000028487 sr_dash: 3M sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 152,4 mm Bore size 50,8 mm Width 25,4 mm n: 3M - SCOTCH-BRITE 18761 Deburring wheel DB-WL, red, 152 mm x 25 mm x 25 mm, 8S MED - 7000028487 cn: GRINDING WHEEL cn2: GRINDING WHEEL cn_clear: GRINDINGWHEEL d: Product description Hard flexible wheel is highly effective in deburring without damaging the workpiece Wrapped construction ensures the wheel runs smoothly, helping to produce consistent results Scotch-Brite non-woven material resists clogging and continuously exposes new abrasive grains for continuous cutting power Minimises heat build-up to reduce the risk of discolouration and warping on heat-sensitive substrates Effective for all types of metals, composites, and glass, where one wheel can handle more tasks When you need an aggressive wheel for different deburring tasks, our Scotch-Brite Deburring Wheel is a good place to start. This silicon carbide wheel offers hard density in both medium and fine grades for light to medium deburring of edges on carbon steel, stainless steel, titanium; also on soft metals such as aluminium, copper and brass as well as composites, plastics and glass. Use our hard, aggressive Scotch-Brite Deburring Wheel for all kinds of deburring tasks and surfaces. Our silicon carbide wheels offer high density (11), in medium and fine coarseness. They are effective at light to medium edge deburring on carbon steel, stainless steel, titanium and soft metals The twisted and non-woven design of our Scotch-Brite deburring wheels provides consistent abrasive performance on flat or irregular surfaces throughout the life of the wheel. Our wheels are hard and durable, making them ideal for deburring pressed or laser-cut parts, cleaning or finishing after belt sanding, reducing grooves in the base material. They offer a superior finish, potentially eliminating the need for further finishing steps. They use an extra sharp silicon carbide abrasive grain, a synthetic material typically used in low-pressure applications, such as finishing and paint preparation. Silicon carbide breaks down faster than alumina, and gives a finer finish. The open web material stays cool in use and is full-bodied, preventing fibre clogging. Combined with the continuous breaking down of the fibres in the web exposing new minerals, this ensures a continuously high cutting performance of the minerals. This results in an extremely long tool life. Scotch-Brite industrial abrasives are unique surface conditioning products consisting of abrasive grains embedded in non-woven nylon or synthetic fibres. Because abrasive grains are combined with fibres in this way, an abrasive system is created that delivers consistent results throughout the product life. Use Scotch-Brite products to improve productivity while reducing the use of stripping chemicals and wire brushes. From aesthetic finishing to blending welds, deburring and more, they work quickly and deliver consistent results, part after part. Suggested applications Use for numerous deburring tasks Suitable for light to medium edge deburring on carbon steel, stainless steel and titanium For use on soft materials such as aluminium, red and yellow copper, composites, plastics and glass ds: dsc: kts: Deburring wheel DB-WL, red, 152 mm x 25 mm x 25 mm, 8S MED kpn: 18761 kpn_dash: kpn_clear: 18761 bkpn: 3M - SCOTCH-BRITE 18761 bkpn_clear: 3M - SCOTCH-BRITE 18761 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Grinding wheel | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite machining tools / 3m - scotch-brite surface treatment / 3m - scotch-brite sanding, sharpening, polishing and deburring / 3m - scotch-brite grinding wheel | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Grinding wheel sr_no_br_cl_ns: 7000028487 sr_ns: 3M-SCOTCH-BRITE7000028487
r: 57110398 p: 76.694 pid: 43112 b: 3M - SCOTCH-BRITE q: 0 st: lt: 8 ean: 00048011187686 sr: 3M - SCOTCH-BRITE 7000028491 sr_no_br: 7000028491 sr_no_br_cl: 7000028491 sr_cl: 3MSCOTCHBRITE7000028491 sr_dash: 3M sold: 0 p_range: none act: 1 avo: 1 av: Diameter 152,4 mm Bore size 50,8 mm Width 25,4 mm n: 3M - SCOTCH-BRITE 18768 Deburring wheel DB-WL, red, 152 mm x 25 mm x 25 mm, 7S FIN - 7000028491 cn: GRINDING WHEEL cn2: GRINDING WHEEL cn_clear: GRINDINGWHEEL d: Product description Hard flexible wheel is highly effective in deburring without damaging the workpiece Wrapped construction ensures the wheel runs smoothly, helping to produce consistent results Scotch-Brite non-woven material resists clogging and continuously exposes new abrasive grains for continuous cutting power Minimises heat build-up to reduce the risk of discolouration and warping on heat-sensitive substrates Effective for all types of metals, composites, and glass, with one wheel able to handle more tasks When you need an aggressive wheel for different deburring tasks, our Scotch-Brite Deburring Wheel is a good place to start. This silicon carbide wheel offers hard density in both medium and fine grades for light to medium deburring of edges on carbon steel, stainless steel, titanium; also on soft metals such as aluminium, copper and brass as well as composites, plastics and glass. Use our hard, aggressive Scotch-Brite Deburring Wheel for all kinds of deburring tasks and surfaces. Our silicon carbide wheels offer high density (11), in medium and fine coarseness. They are effective at light to medium edge deburring on carbon steel, stainless steel, titanium and soft metals The twisted and non-woven design of our Scotch-Brite deburring wheels provides consistent abrasive performance on flat or irregular surfaces throughout the life of the wheel. Our wheels are hard and durable, making them ideal for deburring pressed or laser-cut parts, cleaning or finishing after belt sanding, reducing grooves in the base material. They offer a superior finish, which may eliminate the need for further finishing steps. They use an extra sharp silicon carbide abrasive grain, a synthetic material typically used in low-pressure applications, such as finishing and paint preparation. Silicon carbide breaks down faster than alumina, and gives a finer finish. The open web material stays cool in use and is full-bodied, preventing fibre clogging. Combined with the continuous breaking down of the fibres in the web exposing new minerals, this ensures a continuously high cutting performance of the minerals. This results in an extremely long tool life. Scotch-Brite industrial abrasives are unique surface conditioning products consisting of abrasive grains embedded in non-woven nylon or synthetic fibres. Because abrasive grains are combined with fibres in this way, an abrasive system is created that delivers consistent results throughout the product life. Use Scotch-Brite products to improve productivity while reducing the use of stripping chemicals and wire brushes. From aesthetic finishing to blending welds, deburring and more, they work quickly and deliver consistent results, part after part. Suggested applications Use for numerous deburring tasks Suitable for light to medium edge deburring on carbon steel, stainless steel and titanium For use on soft materials such as aluminium, red and yellow copper, composites, plastics and glass ds: dsc: kts: Deburring wheel DB-WL, red, 152 mm x 25 mm x 25 mm, 7S FIN kpn: 18768 kpn_dash: kpn_clear: 18768 bkpn: 3M - SCOTCH-BRITE 18768 bkpn_clear: 3M - SCOTCH-BRITE 18768 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Grinding wheel | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite machining tools / 3m - scotch-brite surface treatment / 3m - scotch-brite sanding, sharpening, polishing and deburring / 3m - scotch-brite grinding wheel | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Grinding wheel sr_no_br_cl_ns: 7000028491 sr_ns: 3M-SCOTCH-BRITE7000028491
r: 02082475 p: 72.51 pid: 41359 b: 3M - SCOTCH-BRITE q: 0 st: lt: 8 ean: 00048011016627 sr: 3M - SCOTCH-BRITE 7000046050 sr_no_br: 7000046050 sr_no_br_cl: 7000046050 sr_cl: 3MSCOTCHBRITE7000046050 sr_dash: 3M sold: 0 p_range: none act: 1 avo: 1 av: Diameter 150 mm Width 13 mm Bore size 25 mm n: 3M - SCOTCH-BRITE 1662 light grinding wheel LD-WL light, 150 mm x 13 mm x 25.4 mm, 7S FIN - 7000046050 cn: GRINDING WHEEL cn2: GRINDING WHEEL cn_clear: GRINDINGWHEEL d: Product description They provide a clean and economical system for removing light burrs and resulting in a polished finish Deformability ensures a consistent finish and also ensures that the cutting mineral is constantly renewed Non-woven web stays cool during use and has less impact on heat-sensitive materials Unique synthetic resin system for less streaking, so you spend less time cleaning and preparing Multifunctional wheel for cleaning, finishing, blending, deburring and polishing all types of metal, composite and glass The Scotch-Brite Wheel for light deburring is a smoothly rotating wound wheel that provides a clean system for light deburring, polishing and finishing. Made for soft structures and smooth operation, our wheels require less effort from the user than a harder wheel. When a moderate degree of formability and density are needed to maintain critical tolerances and still achieve a fine polished finish, use Scotch-Brite Wheel for light deburring. Designed for light deburring, it is a smooth-spinning wound wheel that provides a clean system for light deburring, polishing and finishing. Made for soft textures and smooth operation, the wheel requires less effort from the user than a harder wheel. A unique resin system helps minimise smudging and reduces heat generation. The lightweight deburring wheel stays cool during use and is resistant to clogging thanks to its non-woven web construction. This reduces the risk of discolouration and deformation of parts, and gives the wheel a longer life. Our wheels are available in fine abrasive material sizes. ds: dsc: kts: light grinding wheel LD-WL light, 150 mm x 13 mm x 25.4 mm, 7S FIN kpn: 1662 kpn_dash: kpn_clear: 1662 bkpn: 3M - SCOTCH-BRITE 1662 bkpn_clear: 3M - SCOTCH-BRITE 1662 c_path: Home / Tools / Machining tools / Surface treatment / Sanding, sharpening, polishing and deburring / Grinding wheel | Home / Our brands / 3m - scotch-brite / 3m - scotch-brite tools / 3m - scotch-brite machining tools / 3m - scotch-brite surface treatment / 3m - scotch-brite sanding, sharpening, polishing and deburring / 3m - scotch-brite grinding wheel | Home / Promotions / Promotions / Bulk discounts on lubricants and sealants / Grinding wheel sr_no_br_cl_ns: 7000046050 sr_ns: 3M-SCOTCH-BRITE7000046050
