r: 02832474 p: 8.223 pid: 42493 b: WERA q: 0 st: lt: 12 ean: 4013288181633 sr: WERA 05100080001 sr_no_br: 05100080001 sr_no_br_cl: 05100080001 sr_cl: WERA05100080001 sr_dash: sold: 16.446 p_range: none type: standard act: 1 avo: 1 av: Drive size PZ1 Drive type Pozidriv Blade length 80 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V n: WERA 918 SPZ SB Pozidriv screwdriver, PZ 1 x 80 mm - 05100080001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Wera chiseldriver for screwdriving, chiseling, mortising and slackening stuck screws. With multi-component Kraftform handle for fast and smooth work. Kraftform Plus: Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. The pound-thru hexagonal blade made of premium bit material ensures power transmission without loss even at hammer blows. Tough tempered material to prevent the blade from splintering or breaking. With integrated impact cap to increase service life and reduce risk of splintering. Higher torques can be transmitted with open-end or ring spanners using the integrated hexagon bolster. The Wera Black Point tip and a sophisticated hardening process guarantee a long usability for the tip, increased corrosion protection and exact fitting accuracy. With hexagon anti-roll protection to avoid bits from rolling away annoyingly in the workplace. Chiseldriver for fastening, chiselling and loosening Hexagonal blade extending through the handle Multi-component Kraftform handle for fast and ergonomic screwdriving Impact cap and bolster for the transfer of higher torque The Wera Black Point tip offers an exact fit and optimum corrosion protection Application Suitable for Pozidriv screws Blade Hexagonal throughout with impact cap, hexagonal bolster for sizes 1 - 4 Design Chrome-plated, Black Point Handle Kraftform with non-roll feature, multi-component, size 4/200: Kraftform with non-roll feature, single-component Features and benefits Screwdrivers are often misused as chisels. This can be dangerous. The chiseldriver is the solution when not only screwdriving is required. For fastening, chiselling and loosening seized screws. Wera chiseldriver: the screwdriver whenever the going gets tough! An integrated impact cap lengthens the service life and reduces the danger of splintering. Nevertheless, always wear protective goggles. A hexagon blade made out of high-quality bit material extends right through the handle - thereby ensuring full transfer of force, even when struck with a hammer. The ductile tempered material prevents the blade from splintering or breaking. Greater torque can be transferred by fitting an open-jaw or ring spanner over the integrated hex bolster. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. The hexagonal non-roll feature prevents any rolling away at the workplace. ds: dsc: Scope of delivery 918 SPZ SB Screwdriver for Pozidriv screws, PZ 1 x 80 mm kts: Pozidriv screwdriver, PZ 1 x 80 mm kpn: 918 SPZ SB kpn_dash: kpn_clear: 918SPZSB bkpn: WERA 918 SPZ SB bkpn_clear: WERA 918SPZSB c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05100080001 sr_ns: WERA05100080001
r: 08073453 p: 8.17 pid: 30373 b: WIHA q: 0 st: lt: 8 ean: 4010995032234 sr: WIHA 03223 sr_no_br: 03223 sr_no_br_cl: 03223 sr_cl: WIHA03223 sr_dash: sold: 16.34 p_range: KLIUM_PRODUCT_RANGE_341 type: standard act: 1 avo: 1 av: Drive size Slotted 3,5 mm Blade length 75 mm Blade thickness 0,6 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Slotted Product Range Wiha SoftFinish n: WIHA 530035 screwdriver SoftFinish slotted head with through hexagonal blade and solid steel cap 3.5 x 75 mm - 03223 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Simplifies your work: Striking cap integrated into the handle allows you to strike and lift with the screwdriver. Makes handling easier: Easy loosening of tight screws thanks to hex bolster for spanners. Protects your health: With the patented SoftFinish handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs. Increases your efficiency: Screwdriver handle size concept for optimal balance between precision and control. Product dimensions: 186 x 30 x 30 mm (LxWxD) Application: Particularly suitable for dry applications. Supplementary information: * Additional dimension. Non-DIN size. Ergonomic working - Recommended by doctors and therapists of the German Campaign for Healthier Backs Wiha handle size concept - powerful and sensitive fastening Integrated striking cap allows users to strike and chisel with the screwdriver Easy loosening of tight screws thanks to hex bolster for spanners ds: dsc: kts: screwdriver SoftFinish slotted head with through hexagonal blade and solid steel cap 3.5 x 75 mm kpn: 530035 kpn_dash: kpn_clear: 530035 bkpn: WIHA 530035 bkpn_clear: WIHA 530035 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wiha / Wiha tools / Wiha hand tools / Wiha screwdrivers and bits / Wiha screwdrivers / Wiha screwdriver | Home / Our brands / Wiha / Wiha Ranges / Wiha softfinish sr_no_br_cl_ns: 03223 sr_ns: WIHA03223
r: 08074456 p: 8.17 pid: 28229 b: WIHA q: 0 st: lt: 8 ean: 4010995436780 sr: WIHA 43678 sr_no_br: 43678 sr_no_br_cl: 43678 sr_cl: WIHA43678 sr_dash: sold: 16.34 p_range: KLIUM_PRODUCT_RANGE_332 type: standard act: 1 avo: 1 av: Drive size PH1 Blade length 60 mm Blade thickness ESD Yes Non-sparking No VDE approved No With safety colour code 1000V Drive type Phillips Product Range Wiha PicoFinish n: WIHA 271P101 fine screwdriver PicoFinish ESD Phillips PH1 x 60 mm - 43678 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Lowers your costs: Electrostatically conductive tools protect electronic components from damage. Makes handling easier: Extra-long rotating cap ensures optimum feed. Increases your efficiency: Screwdriver handle size concept for optimal balance between precision and control. Increases your efficiency: Careful workmanship and controlled power transmission thanks to the slim handle with soft grip. Product dimensions: 162 x 17 x 17 mm (LxWxD) Application: Ideal for fine and delicate fastening tasks on components at risk of electrostatic discharge. The challenge when working on electronic components is that they can become damaged even at the lowest voltages. The electrostatically conductive fine screwdriver PicoFinish ESD masters such tasks effortlessly. Thanks to their long, slim handles and quick-turning zone, these fine screwdrivers are ideal for careful, precise work practices on delicate workpieces. Their ergonomic handle design with soft zone makes them comfortable to use. The smooth-running rotating cap allows users to turn the screwdriver quickly and sensitively. The printed screwdriver symbols on the rotating cap make it easier to select the right screwdriver profile. The dissipative tool safely channels electrostatic energy away in a controlled fashion. The ESD fine screwdrivers are manufactured in compliance with international IEC standard 61340-5-1, thus guaranteeing maximum protection for electronic components. These screwdrivers have a surface resistance between 10^6 - 10^9 ohm. ds: dsc: kts: fine screwdriver PicoFinish ESD Phillips PH1 x 60 mm kpn: 271P101 kpn_dash: kpn_clear: 271P101 bkpn: WIHA 271P101 bkpn_clear: WIHA 271P101 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wiha / Wiha tools / Wiha hand tools / Wiha screwdrivers and bits / Wiha screwdrivers / Wiha screwdriver | Home / Our brands / Wiha / Wiha Ranges / Wiha picofinish sr_no_br_cl_ns: 43678 sr_ns: WIHA43678
r: 08080446 p: 8.12 pid: 75195 b: BAHCO q: 0 st: lt: 10 ean: 7314150282807 sr: BAHCO SB141.020.100 sr_no_br: SB141.020.100 sr_no_br_cl: SB141020100 sr_cl: BAHCOSB141020100 sr_dash: sold: 16.24 p_range: KLIUM_PRODUCT_RANGE_113 type: standard act: 1 avo: 1 av: Drive size T20 Blade length 100 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Torx Tamper Resistant Product Range Bahco BahcoFit n: BAHCO SB141.020.100 screwdriver BahcoFit rubber grip Tamper-Resistant TORX TR20 x 100 mm cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description: BahcoFit Tamper-Resistant TORX screwdriver with rubber grip, TR20 x 100 mm, retail packaging Features: For tamper-resistant TORX screws with safety pin Point with phosphate finish for greater accuracy and chrome-plated blade for strong corrosion protection, durable tool Two-component handle with vertical grooves and large area of soft grip for comfortable grip and high torque transmission Integrated hanging hole High-alloy quality steel, fully hardened SB: retail packaging Comfortable to use with the two-component handle made with more than 75% rubber Maximum grip thanks to vertical anti-slip grooves in the handle Easy size and type designation using the markings on the handle ds: dsc: kts: screwdriver BahcoFit rubber grip Tamper-Resistant TORX TR20 x 100 mm kpn: SB141.020.100 kpn_dash: kpn_clear: SB141020100 bkpn: BAHCO SB141.020.100 bkpn_clear: BAHCO SB141020100 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Bahco / Bahco tools / Bahco hand tools / Bahco screwdrivers and bits / Bahco screwdrivers / Bahco screwdriver | Home / Our brands / Bahco / Bahco Ranges / Bahco bahcofit sr_no_br_cl_ns: SB141020100 sr_ns: BAHCOSB141.020.100
r: 08080445 p: 8.05 pid: 77029 b: BAHCO q: 0 st: lt: 10 ean: 7314150282791 sr: BAHCO SB141.015.100 sr_no_br: SB141.015.100 sr_no_br_cl: SB141015100 sr_cl: BAHCOSB141015100 sr_dash: sold: 16.1 p_range: KLIUM_PRODUCT_RANGE_113 type: standard act: 1 avo: 1 av: Drive size T15 Blade length 100 mm Blade thickness ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Torx Tamper Resistant Product Range Bahco BahcoFit n: BAHCO SB141.015.100 screwdriver BahcoFit rubber grip Tamper-Resistant TORX TR15 x 100 mm cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description: BahcoFit Tamper-Resistant TORX screwdriver with rubber grip, TR15 x 100 mm, retail packaging Features: For tamper-resistant TORX screws with safety pin Point with phosphate finish for greater accuracy and chrome-plated blade for strong corrosion protection, durable tool Two-component handle with vertical grooves and large area of soft grip for comfortable grip and high torque transmission Integrated hanging hole High-alloy quality steel, fully hardened SB: retail packaging Comfortable to use with the two-component handle made with more than 75% rubber Maximum grip thanks to vertical anti-slip grooves in the handle Easy size and type designation using the markings on the handle ds: dsc: kts: screwdriver BahcoFit rubber grip Tamper-Resistant TORX TR15 x 100 mm kpn: SB141.015.100 kpn_dash: kpn_clear: SB141015100 bkpn: BAHCO SB141.015.100 bkpn_clear: BAHCO SB141015100 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Bahco / Bahco tools / Bahco hand tools / Bahco screwdrivers and bits / Bahco screwdrivers / Bahco screwdriver | Home / Our brands / Bahco / Bahco Ranges / Bahco bahcofit sr_no_br_cl_ns: SB141015100 sr_ns: BAHCOSB141.015.100
r: 08073319 p: 8.03 pid: 29385 b: WIHA q: 0 st: lt: 8 ean: 4010995008819 sr: WIHA 00881 sr_no_br: 00881 sr_no_br_cl: 00881 sr_cl: WIHA00881 sr_dash: sold: 16.06 p_range: KLIUM_PRODUCT_RANGE_341 type: standard act: 1 avo: 1 av: Drive size T8 Blade length 60 mm Blade thickness ESD No Non-sparking No VDE approved Yes With safety colour code 1000V No Drive type Torx Product Range Wiha SoftFinish n: WIHA 325008 screwdriver SoftFinish electric Torx T8 x 60 mm - 00881 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Increases your efficiency: Unique Wiha handle-length concept for optimum balance of torque and control. Protects your health: With the patented SoftFinish handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs. Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC. Product dimensions: 164 x 23 x 23 mm (LxWxD) Application: For work in the area of live parts up to 1,000 V AC. Supplementary information: no slim version Manufactured acc. to IEC 60900. ds: dsc: kts: screwdriver SoftFinish electric Torx T8 x 60 mm kpn: 325008 kpn_dash: kpn_clear: 325008 bkpn: WIHA 325008 bkpn_clear: WIHA 325008 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wiha / Wiha tools / Wiha hand tools / Wiha screwdrivers and bits / Wiha screwdrivers / Wiha screwdriver | Home / Our brands / Wiha / Wiha Ranges / Wiha softfinish sr_no_br_cl_ns: 00881 sr_ns: WIHA00881
r: 02835189 p: 7.933 pid: 41618 b: WERA q: 0 st: lt: 12 ean: 4013288183972 sr: WERA 05030400001 sr_no_br: 05030400001 sr_no_br_cl: 05030400001 sr_cl: WERA05030400001 sr_dash: sold: 15.866 p_range: KLIUM_PRODUCT_RANGE_309 type: standard act: 1 avo: 1 av: Drive size T4 Blade length 40 mm Blade thickness ESD Yes Non-sparking No VDE approved No With safety colour code 1000V Drive type Torx Product Range Wera Kraftform n: WERA 1567 TORX HF ESD Micro Kraftform screwdriver with holding function, TX 4 x 40 mm - 05030400001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description ESD-safe Micro screwdriver. Dependable protection against electrostatic energy and associated damage. Holding function: the wedging forces resulting from the contact pressure between the drive tip and the screw profile securely hold the screw on the tool. Rapid twisting results from fixing the hand on the head and using the fast-turning zone just below. This makes time-consuming grip adjustments unnecessary. Power zones with integrated soft sections ensure the transfer of high loosening and tightening torque; a precision zone for the right rotation angle during fine adjustment work. The Black Point tip offers optimised corrosion protection and an exact fit. Take it easy tool finder with colour coding according to profiles and size stamp - for simple and rapid accessing of the required tool. Kraftform Micro screwdriver for TORX® screws ESD-safe tool thanks to surface resistance of<= 10 9 Ohm Multi-component Kraftform Micro handle for fast and ergonomic screwdriving Holding function for TORX® screws Take it easy tool finder: colour coding according to profile and size Application TORX® socket screws Blade Round Design Holding function for TORX® screws made according to Acument Global Technologies Inc. specifications, chrome-plated, Black Point Handle Kraftform Micro with non-roll feature and rotating cap, multi-component. Take it easy tool finder: colour coding according to profile (green = TORX®) and size stamp. Features and benefits The requirements for ESD-safe screwdrivers are specified in the European standard DIN EN 61340-5-1. This standard also includes a handle that has to be out of a defined conductive material. The Wera products in the ESD series satisfy these standards and the even more stringent requirements demanded by some technology companies. The electric surface resistance of the Wera ESD material is<= 10 9 ohm. This securely protects components against electrostatic energy and associated damage. In tight assembly or disassembly situations, for example in engine compartments, it is not possible to securely hold the screw with the hand on the screwdriver, and the screw subsequently often gets lost. Lengthy searches or the loss of the screw (with the associated danger that could bring about) are the consequence. The HF tools developed by Wera are ideal because they feature an optimised geometry of the original TORX® profile. The wedging forces resulting from the surface pressure between the drive tip and the screw profile mean that the screw is securely held on the tool! Multi-component screwdriver handle for ergonomic working. The precision zone directly above the blade gives the user a better feel for the right rotation angle during fine adjustment work. The power zone has integrated soft zones near the blade tip to ensure high torque transfer for loosening or tightening screws without losing contact with the screw. The fast-turning zone just below the rotating cap allow rapid twisting. This makes time-consuming grip adjustments as with other conventional precision screwdrivers unnecessary. The Wera Black Point tip and a refined hardening process ensure long service life of the tip, improved corrosion protection and an exact fit. ds: dsc: Scope of delivery 1567 TORX® HF ESD Kraftform Micro screwdriver with holding function for TORX® screws, TX 4 x 40 mm kts: Kraftform screwdriver with holding function, TX 4 x 40 mm kpn: 1567 TORX HF ESD Micro kpn_dash: kpn_clear: 1567TORXHFESDMicro bkpn: WERA 1567 TORX HF ESD Micro bkpn_clear: WERA 1567TORXHFESDMicro c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver | Home / Our brands / Wera / Wera Ranges / Wera kraftform sr_no_br_cl_ns: 05030400001 sr_ns: WERA05030400001
r: 41292994 p: 7.933 pid: 98861 b: FACOM q: 5 st: 1 lt: 1 ean: 3148510118406 sr: FACOM ATHH.6.5X125 sr_no_br: ATHH.6.5X125 sr_no_br_cl: ATHH65X125 sr_cl: FACOMATHH65X125 sr_dash: sold: 15.866 p_range: none type: standard act: 1 avo: 1 av: Drive size Slotted 6,5 mm Supplier warranty FACOM - Lifetime (E) Blade length 125 mm Blade thickness 1,2 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Slotted n: FACOM ATHH.6.5X125 screwdriver with wooden handle for slotted screws - forged blade with 6 sides cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description ATHH - Screwdrivers with wooden handle for slotted screws - forged blade with 6 edges Features The bled extends into the handle, allowing a stuck screw to be "loosened". Forged and hardened bled, fitted with hexagon for tightening or loosening with open-end spanner. Blade is anchored in the handle with wings. Handle with steel fittings ring around handle, with a leather ring on the other side protecting the wood from blows. Finish: chrome-plated, polished. ds: dsc: kts: screwdriver with wooden handle for slotted screws - forged blade with 6 sides kpn: ATHH.6.5X125 kpn_dash: kpn_clear: ATHH65X125 bkpn: FACOM ATHH.6.5X125 bkpn_clear: FACOM ATHH65X125 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Facom / Facom tools / Facom hand tools / Facom screwdrivers and bits / Facom screwdrivers / Facom screwdriver sr_no_br_cl_ns: ATHH65X125 sr_ns: FACOMATHH.6.5X125
r: 08074540 p: 7.84 pid: 28498 b: WIHA q: 0 st: lt: 6 ean: 4010995008246 sr: WIHA 00824 sr_no_br: 00824 sr_no_br_cl: 00824 sr_cl: WIHA00824 sr_dash: sold: 15.68 p_range: KLIUM_PRODUCT_RANGE_341 type: standard act: 1 avo: 1 av: Drive size Slotted 4,5 mm Blade length 125 mm Blade thickness 1 mm ESD No Non-sparking No VDE approved Yes With safety colour code 1000V No Drive type Slotted Product Range Wiha SoftFinish n: WIHA 320N045125 screwdriver SoftFinish electric slotted head 4.5 x 125 mm - 00824 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Increases your efficiency: Unique Wiha handle-length concept for optimum balance of torque and control. Protects your health: With the patented SoftFinish handle design, ensuring work is kind to hands and muscles. Recommended by doctors and therapists at German Campaign for Healthier Backs. Offers you full protection: Each tool individually tested at 10,000 V AC and approved for 1,000 V AC. Product dimensions: 236 x 30 x 30 mm (LxWxD) Application: For work in the area of live parts up to 1,000 V AC. Ergonomic working - Recommended by doctors and therapists of the German Campaign for Healthier Backs Wiha handle size concept - powerful and sensitive fastening Safe operation up to 1,000 V AC Fastening screws by hand causes considerable strain on wrists and muscles in the long term. The highly ergonomically shaped SoftFinish screwdriver provides a remedy, ensuring optimal transmission of hand force. The different handle heights are always matched to the fastening. The long, slender handle heights can be used to fasten small screws quickly and firmly. There are also large-volume handle heights to fasten large screws which can be used to apply greater torques. The roll-off protection and screw symbol printed on the handle end ensure users work efficiently. Thanks to its optimum grip, the SoftFinish screwdriver is particularly suitable for applications in dry environments. The position of the soft and hard zones on the handle also supports the perfect grip for quick and powerful turning. These insulated screwdrivers undergo routine individual piece testing as per the international IEC 60900 standard, thus providing users with a tool to work safely on live parts up to 1,000 V AC. Manufactured acc. to IEC 60900. ds: dsc: kts: screwdriver SoftFinish electric slotted head 4.5 x 125 mm kpn: 320N045125 kpn_dash: kpn_clear: 320N045125 bkpn: WIHA 320N045125 bkpn_clear: WIHA 320N045125 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wiha / Wiha tools / Wiha hand tools / Wiha screwdrivers and bits / Wiha screwdrivers / Wiha screwdriver | Home / Our brands / Wiha / Wiha Ranges / Wiha softfinish sr_no_br_cl_ns: 00824 sr_ns: WIHA00824
r: 41070312 p: 7.768 pid: 70562 b: WERA q: 2 st: 1 lt: 1 ean: 4013288003355 sr: WERA 05110008001 sr_no_br: 05110008001 sr_no_br_cl: 05110008001 sr_cl: WERA05110008001 sr_dash: sold: 15.536 p_range: none type: standard act: 1 avo: 1 av: Drive size Slotted 5,5 mm Blade length 200 mm Blade thickness 1 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Slotted n: WERA 335 cutting screwdriver, electrician blade, 1 x 5.5 x 200 mm - 05110008001 cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description Premium Kraftform Plus screwdriver with electrician's blade. Multi-component Kraftform Plus handle for comfortable ergonomic screwdriving, which avoids blisters and calluses. Hard handle zones for high working speeds, while soft handle zones guarantee a high torque transfer. The tips of Wera Lasertip screwdrivers are microscopically roughened with laser beams. This rough surface "bites" into the screw head and unintentional slipping is a thing of the past. Take it easy tool finder with colour coding by profile and size stamping - for quick and easy identification of the required tool. The hexagon anti-roll protection avoids screwdrivers from rolling away annoyingly at the workplace. Slotted screwdriver -electrician's blade Multi-component Kraftform handle for fast and ergonomic screwdriving Take it easy tool finder: colour coding according to profile and size Hexagonal anti-roll feature against rolling away Lasertip tips for more secure fit in the screw head Application Slotted screws Blade Round Design Chrome-plated, Lasertip Handle Kraftform with non-roll feature, multi-component. Take it easy tool finder: colour coding according to profile (yellow = slotted) and size stamp. Features and benefits Kraftform Plus screwdrivers - ergonomics you can grasp. They relieve the entire hand-arm system even when used intensively. Along with other technical and product advantages such as the Lasertip for a secure fit in the screw head, Kraftform screwdrivers are the ideal choice whenever manual screwdriving jobs are concerned. It happens time and time again that the tip slips out of the screw head when screwdriving, sometimes damaging valuable surfaces or even causing injury. The tips of the Wera Lasertip screwdrivers are microscopically roughened by means of a laser. This rough surface literally "bites" itself firmly into the screw head. Slipping out becomes a thing of the past. A precisely-focused laser creates a sharp-edged surface structure. Wera Lasertip "bites" itself into the screw head and prevents any slips out of the recess. It is available for screwdrivers for slotted, Phillips and Pozidriv screws. Wera Lasertip reduces the contact pressure required and enhances force transfer - meaning less screwdriving effort is required. Screwdriving becomes safer and easier. Screwdrivers with Take it easy tool finder: colour coding according to profile and size stamp. The basic idea for the prototype of the Kraftform handle - that the hand should dictate the design - has, right through to today, proved to be correct. In cooperation with the internationally recognised Fraunhofer IAO Institute, Wera developed a screwdriver handle designed to match the shape of the human hand as long ago as the 1960s. After a long development phase, the Wera Kraftform handle was launched to the market in 1968. It has been optimised through the years with new technologies, but has kept its proven shape. After all, the human hand has not changed either. The outstanding design of the Kraftform handle that fits perfectly into the hand prevents hand injuries such as blisters and calluses. The hard materials used for the handle ensure rapid hand repositioning without any danger of the skin "sticking" to the handle. The surrounding hard zones with large diameters glide like wheels through the hand. ds: dsc: Scope of delivery 335 Screwdriver for slotted screws, 1 x 5.5 x 200 mm kts: cutting screwdriver, electrician blade, 1 x 5.5 x 200 mm kpn: 335 kpn_dash: kpn_clear: 335 bkpn: WERA 335 bkpn_clear: WERA 335 c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Wera / Wera tools / Wera hand tools / Wera screwdrivers and bits / Wera screwdrivers / Wera screwdriver sr_no_br_cl_ns: 05110008001 sr_ns: WERA05110008001
r: 02745240 p: 7.768 pid: 71978 b: BAHCO q: 0 st: lt: 7 ean: 7314150270866 sr: BAHCO BE-8241I sr_no_br: BE-8241I sr_no_br_cl: BE8241I sr_cl: BAHCOBE8241I sr_dash: BAHCO BE sold: 15.536 p_range: KLIUM_PRODUCT_RANGE_118 type: standard act: 1 avo: 1 av: Drive size Slotted 5,5 mm Blade length 125 mm Blade thickness 1 mm ESD No Non-sparking No VDE approved No With safety colour code 1000V Drive type Slotted Product Range Bahco ERGO n: BAHCO BE-8241I screwdriver ERGO stainless steel with three-component handle slot 1 mm x 5.5 mm x 125 mm cn: SCREWDRIVER cn2: SCREWDRIVER cn_clear: SCREWDRIVER d: Product description: Screwdriver developed according to the scientific ERGO process Screwdriver for slotted head screws Handle: 3-component handle, for maximum user comfort and force transmission Easy to choose the right tip, with the colour-coded handle and the symbol on the domed end Blade: Stainless steel, protects against the formation of rust that can occur when screwdriving jobs on stainless steel are performed with non-stainless steel tools ISO 2380 / DIN 5264 ds: dsc: kts: screwdriver ERGO stainless steel with three-component handle slot 1 mm x 5.5 mm x 125 mm kpn: BE-8241I kpn_dash: BE kpn_clear: BE8241I bkpn: BAHCO BE-8241I bkpn_clear: BAHCO BE8241I c_path: Home / Tools / Hand tools / Screwdrivers and bits / Screwdrivers / Screwdriver | Home / Our brands / Bahco / Bahco tools / Bahco hand tools / Bahco screwdrivers and bits / Bahco screwdrivers / Bahco screwdriver | Home / Our brands / Bahco / Bahco Ranges / Bahco ergo sr_no_br_cl_ns: BE8241I sr_ns: BAHCOBE-8241I
