Product description:
Precision for light chemical protection
- Freedom of movement and excellent sensitivity, thanks to reduced glove thickness
- Chlorinated finish for better protection of products to be handled
Applications:
- Mechanical industry
- Assembly of small, oily parts
- Precision assembly
- Machining parts with cutting oil
- Food industry
- Food preparation
- Handling food products
- Construction (carpentry)
- Working with PVC-based liners
- Preparing coatings, vanishing
Instructions for use:
- It is recommended to check that the gloves are suitable for the intended use, as workplace conditions may differ from "ce" type tests.
- Persons sensitive to dithiocarbamate or thiazole are not recommended to use these gloves.
- Use the gloves with dry, clean hands.
- Do not use the gloves with a chemical product for longer than the measured breakthrough time.
- Use 2 pairs of gloves alternately if in prolonged contact with solvents.
- Raise the cuff to prevent hazardous chemical from dripping onto the arm.
- Check gloves for cuts and holes before using.
Storage conditions:
- Store gloves in their original packaging, protected from light and humidity.
Washing conditions:
- Before removing gloves, clean them properly:
- When used with paint; pigments or ink: wipe with a damp cloth with an appropriate solvent and then with a dry cloth.
- When used with a solvent (thinner, etc.) : wipe with a dry cloth
- When used with acids or alkaline substances: rinse thoroughly under running water and wipe with a dry cloth
Drying conditions:
- Ensure that the inside of the gloves is dry before putting them back on.
Legislation:
- This product is not classified as hazardous according to directive 1999/45/ec of the european parliament and council. This product does not contain any substances requiring special attention according to directive 1907/2006 of the european Parliament and of the Council (reach).