r: 02776749 p: 1.02 pid: 20695 b: FISCHER q: 0 st: lt: 8 ean: 4048962251371 sr: FISCHER 536854 sr_no_br: 536854 sr_no_br_cl: 536854 sr_cl: FISCHER536854 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 8 mm Length 90 mm Max. useful length 40 mm n: FISCHER 536854 concrete screw FBS II 8x90 40/25 hexagon head with TX recess cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description The high-performance concrete screw for absolute installation ease. The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example. With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again The fischer concrete screws FBS II 6-10 offer the innovative possibility for the ETA compliant application in masonry. This grants high security not only in concrete but also in many other applications in other substrates With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2 The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again The checking gauge allows for reuse in temporary fixings (e. g. inclined supports) covered by the national approval The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups Suitable for The UltraCut FBS II is recommended for the push-through installation Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Reinforcement of existing concrete structures Bricks of clay (EN771-1) Solid sand-lime brick (EN771-2) Perforated sand-lime brick (EN771-2) Also suitable for: Concrete C12/15 Solid building materials Masonry with a dense structure Application Guard rails Consoles/Base plates Metal profiles Shelving systems Protection barriers Results / beam anchors Temporary anchoring, e. g. of building site equipment Shuttering props Reinforcement of bridges Rehabilitation of old and ailing buildings Rehabilitation of car parks ds: dsc: kts: concrete screw FBS II 8x90 40/25 hexagon head with TX recess kpn: 536854 kpn_dash: kpn_clear: 536854 bkpn: FISCHER 536854 bkpn_clear: FISCHER 536854 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer concrete screw sr_no_br_cl_ns: 536854 sr_ns: FISCHER536854
r: 02776802 p: 0.92 pid: 22025 b: FISCHER q: 0 st: lt: 8 ean: 4048962251647 sr: FISCHER 536881 sr_no_br: 536881 sr_no_br_cl: 536881 sr_cl: FISCHER536881 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 8 mm Max. useful length 30 mm Length 80 mm n: FISCHER 536881 concrete screw FBS II 8x80 30/15 countersunk head cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description The high-performance concrete screw for absolute installation ease. The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example. With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again The fischer concrete screws FBS II 6-10 offer the innovative possibility for the ETA compliant application in masonry. This grants high security not only in concrete but also in many other applications in other substrates With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2 The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again The checking gauge allows for reuse in temporary fixings (e. g. inclined supports) covered by the national approval The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups Suitable for The UltraCut FBS II is recommended for the push-through installation Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Reinforcement of existing concrete structures Bricks of clay (EN771-1) Solid sand-lime brick (EN771-2) Perforated sand-lime brick (EN771-2) Also suitable for: Concrete C12/15 Solid building materials Masonry with a dense structure Application Guard rails Consoles/Base plates Metal profiles Reinforcement of bridges Rehabilitation of old and ailing buildings Rehabilitation of car parks ds: dsc: kts: concrete screw FBS II 8x80 30/15 countersunk head kpn: 536881 kpn_dash: kpn_clear: 536881 bkpn: FISCHER 536881 bkpn_clear: FISCHER 536881 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer concrete screw sr_no_br_cl_ns: 536881 sr_ns: FISCHER536881
r: 02776735 p: 0.83 pid: 22085 b: FISCHER q: 0 st: lt: 8 ean: 4048962251630 sr: FISCHER 536880 sr_no_br: 536880 sr_no_br_cl: 536880 sr_cl: FISCHER536880 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 8 mm Max. useful length 10 mm Length 60 mm n: FISCHER 536880 concrete screw FBS II 8x60 10/- countersunk head cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description The high-performance concrete screw for absolute installation ease. The fischer UltraCut FBS II is the perfect concrete screw for top installation comfort. The special saw tooth geometry enables fast cutting into the concrete. Drill hole cleaning is not required for installations in ceilings or floors. Thanks to the national approval, multiple usage for temporary anchorings (for example, formwork construction) is permitted. For the installation of the wall screw, we recommend a tangential impact driver with a compatible socket or a special TX bit. The concrete screw is ideal for the fixation of railings, protection barriers, cantilevers, and formwork bracings, for example. With up to 3 embedment depths, it allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete The approved adjustment for the concrete screws allows the screw to be unscrewed twice to align the attached part, and then to tighten the screw again The fischer concrete screws FBS II 6-10 offer the innovative possibility for the ETA compliant application in masonry. This grants high security not only in concrete but also in many other applications in other substrates With up to 3 embedment depths, the UltraCut FBS II US allows for the same screw to be used for different component thicknesses The special saw tooth geometry enables fast cutting into the concrete Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper Expansion-free anchoring (undercut) allows for lowest edge- and axial spacings The ETA approval covers applications in cracked concrete and seismic power categories C1 and C2 The approved adjustment for the concrete screws allows the screw to be unscrewed twice to place maximum 10 mm packing below the base plate head or to align the attached part, and then to tighten the screw again The checking gauge allows for reuse in temporary fixings (e. g. inclined supports) covered by the national approval The concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel CP and stainless steel R has an ETA for bricks of clay (EN771-1), solid sand-lime brick (EN771-2) and perforated sand-lime brick (EN771-2) for a flexible use in different substrates The installation of the concrete screw FBS II 6-10 in zinc-plated steel, multiple-coated steel and stainless steel R in masonry brick can be made in the joints or in plastered substrates also in groups Suitable for The UltraCut FBS II is recommended for the push-through installation Drill holes do not need to be cleaned during vertical installation (ceiling and floor). For floor fixings the hole must be drilled 3x drill hole diameter deeper We recommend using a tangential impact screwdriver with a suitable impact screwdriver socket or an internal TX drive The screw is installed correctly when the screw head sits flush on the fixture and cannot be screwed in deeper (visual setting control) Building materials Approved for: Concrete C20/25 to C50/60, cracked and non-cracked Reinforcement of existing concrete structures Bricks of clay (EN771-1) Solid sand-lime brick (EN771-2) Perforated sand-lime brick (EN771-2) Also suitable for: Concrete C12/15 Solid building materials Masonry with a dense structure Application Guard rails Consoles/Base plates Metal profiles Reinforcement of bridges Rehabilitation of old and ailing buildings Rehabilitation of car parks ds: dsc: kts: concrete screw FBS II 8x60 10/- countersunk head kpn: 536880 kpn_dash: kpn_clear: 536880 bkpn: FISCHER 536880 bkpn_clear: FISCHER 536880 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Fischer / Fischer fasteners and machine components / Fischer fasteners / Fischer screws / Fischer concrete screw sr_no_br_cl_ns: 536880 sr_ns: FISCHER536880
r: 03350111 p: 0.81 pid: 176722 b: SPIT q: 0 st: lt: 4 ean: 3439510586785 sr: SPIT 058678 sr_no_br: 058678 sr_no_br_cl: 058678 sr_cl: SPIT058678 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: n: SPIT 058678 TAPCON 5 ROD XTREM Ø6 M8-M10 self-tapping concrete screw with female thread 35 mm cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description ETA-seismic approved, fire tested, leading concrete anchor with excellent performance ETA-option 1 approval for cracked and uncracked concrete C1 seismic approval for Ø6 Fire certificate Double threaded M8/M10 Ideal for supporting cables, pipes and fire protection systems Anti-rotation ridges under the head reduce the risk of over-tightening the screw, for secure fixing The 2 cutting edges at the end of the screw facilitate installation regardless of the quality of the concrete Full thread up to the head for maximum performance in full concrete and canal plate 100% Made in Europe ds: dsc: kts: TAPCON 5 ROD XTREM Ø6 M8-M10 self-tapping concrete screw with female thread 35 mm kpn: 058678 kpn_dash: kpn_clear: 058678 bkpn: SPIT 058678 bkpn_clear: SPIT 058678 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Spit / Spit fasteners and machine components / Spit fasteners / Spit screws / Spit concrete screw sr_no_br_cl_ns: 058678 sr_ns: SPIT058678
r: 03350109 p: 0.66 pid: 176723 b: SPIT q: 0 st: lt: 5 ean: 3439510586662 sr: SPIT 058666 sr_no_br: 058666 sr_no_br_cl: 058666 sr_cl: SPIT058666 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 6 mm Length 100 mm n: SPIT 058666 TAPCON 5 HF XTREM Ø6 concrete screw with hexagonal head 100/65 mm cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description ETA-seismic approved, fire tested, leading concrete anchor with excellent performance ETA-option 1 approval for cracked and uncracked concrete C1 seismic approval for Ø6 Fire certificate Anti-rotation ridges under the head reduce the risk of over-tightening the screw, for secure fixing The 2 cutting edges at the end of the screw facilitate installation regardless of the quality of the concrete Torx and hexagon connection for all placement possibilities, even for hard-to-reach applications Full thread up to the head for maximum performance in full concrete and hollow-core slabs Larger flange diameter 100% Made in Europe ds: dsc: kts: TAPCON 5 HF XTREM Ø6 concrete screw with hexagonal head 100/65 mm kpn: 058666 kpn_dash: kpn_clear: 058666 bkpn: SPIT 058666 bkpn_clear: SPIT 058666 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Spit / Spit fasteners and machine components / Spit fasteners / Spit screws / Spit concrete screw sr_no_br_cl_ns: 058666 sr_ns: SPIT058666
r: 03350108 p: 0.6 pid: 176729 b: SPIT q: 0 st: lt: 5 ean: 3439510586655 sr: SPIT 058665 sr_no_br: 058665 sr_no_br_cl: 058665 sr_cl: SPIT058665 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 6 mm Length 80 mm n: SPIT 058665 TAPCON 5 HF XTREM Ø6 concrete screw with hexagonal head 80/45 mm cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description ETA-seismic approved, fire tested, leading concrete anchor with excellent performance ETA-option 1 approval for cracked and uncracked concrete C1 seismic approval for Ø6 Fire certificate Anti-rotation ridges under the head reduce the risk of over-tightening the screw, for secure fixing The 2 cutting edges at the end of the screw facilitate installation regardless of the quality of the concrete Torx and hexagon connection for all placement possibilities, even for hard-to-reach applications Full thread up to the head for maximum performance in full concrete and hollow-core slabs Larger flange diameter 100% Made in Europe ds: dsc: kts: TAPCON 5 HF XTREM Ø6 concrete screw with hexagonal head 80/45 mm kpn: 058665 kpn_dash: kpn_clear: 058665 bkpn: SPIT 058665 bkpn_clear: SPIT 058665 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Spit / Spit fasteners and machine components / Spit fasteners / Spit screws / Spit concrete screw sr_no_br_cl_ns: 058665 sr_ns: SPIT058665
r: 03350107 p: 0.46 pid: 176727 b: SPIT q: 0 st: lt: 5 ean: 3439510586648 sr: SPIT 058664 sr_no_br: 058664 sr_no_br_cl: 058664 sr_cl: SPIT058664 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 6 mm Length 60 mm n: SPIT 058664 TAPCON 5 HF XTREM Ø6 concrete screw with hexagonal head 60/25 mm cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description ETA-seismic approved, fire tested, leading concrete anchor with excellent performance ETA-option 1 approval for cracked and uncracked concrete C1 seismic approval for Ø6 Fire certificate Anti-rotation ridges under the head reduce the risk of over-tightening the screw, for secure fixing The 2 cutting edges at the end of the screw facilitate installation regardless of the quality of the concrete Torx and hexagon connection for all placement possibilities, even for hard-to-reach applications Full thread up to the head for maximum performance in full concrete and hollow-core slabs Larger flange diameter 100% Made in Europe ds: dsc: kts: TAPCON 5 HF XTREM Ø6 concrete screw with hexagonal head 60/25 mm kpn: 058664 kpn_dash: kpn_clear: 058664 bkpn: SPIT 058664 bkpn_clear: SPIT 058664 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Spit / Spit fasteners and machine components / Spit fasteners / Spit screws / Spit concrete screw sr_no_br_cl_ns: 058664 sr_ns: SPIT058664
r: 03350102 p: 0.38 pid: 176721 b: SPIT q: 0 st: lt: 3 ean: 3439510586815 sr: SPIT 058681 sr_no_br: 058681 sr_no_br_cl: 058681 sr_cl: SPIT058681 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 6 mm Length 60 mm n: SPIT 058681 TAPCON 5 DOME XTREM Ø6 concrete screw with round head 60/5 mm cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description ETA-seismic approved, fire tested, leading concrete anchor with excellent performance ETA-option 1 approval for cracked and uncracked concrete C1 seismic approval for Ø6 Fire certificate Wide head (17mm) Anti-rotation ridges under the head reduce the risk of over-tightening the screw, for a secure fixing The 2 cutting edges at the end of the screw facilitate installation regardless of the quality of the concrete Torx connection for all placement possibilities, even for hard-to-reach applications Full thread up to the head for maximum performance in full concrete and hollow-core slabs Larger flange diameter 100% Made in Europe ds: dsc: kts: TAPCON 5 DOME XTREM Ø6 concrete screw with round head 60/5 mm kpn: 058681 kpn_dash: kpn_clear: 058681 bkpn: SPIT 058681 bkpn_clear: SPIT 058681 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Spit / Spit fasteners and machine components / Spit fasteners / Spit screws / Spit concrete screw sr_no_br_cl_ns: 058681 sr_ns: SPIT058681
r: 03350104 p: 0.35 pid: 176688 b: SPIT q: 0 st: lt: 5 ean: 3439510586617 sr: SPIT 058661 sr_no_br: 058661 sr_no_br_cl: 058661 sr_cl: SPIT058661 sr_dash: sold: 0 p_range: none type: standard act: 1 avo: 1 av: Diameter 6 mm Length 40 mm n: SPIT 058661 TAPCON 5 HF XTREM Ø6 concrete screw with hexagonal head 40/5 mm cn: CONCRETE SCREW cn2: CONCRETE SCREW cn_clear: CONCRETESCREW d: Product description ETA-seismic approved, fire tested, leading concrete anchor with excellent performance ETA-option 1 approval for cracked and uncracked concrete C1 seismic approval for Ø6 Fire certificate Anti-rotation ridges under the head reduce the risk of over-tightening the screw, for secure fixing The 2 cutting edges at the end of the screw facilitate installation regardless of the quality of the concrete Torx and hexagon connection for all placement possibilities, even for hard-to-reach applications Full thread up to the head for maximum performance in full concrete and hollow-core slabs Larger flange diameter 100% Made in Europe ds: dsc: kts: TAPCON 5 HF XTREM Ø6 concrete screw with hexagonal head 40/5 mm kpn: 058661 kpn_dash: kpn_clear: 058661 bkpn: SPIT 058661 bkpn_clear: SPIT 058661 c_path: Home / Fasteners and machine components / Fasteners / Screws / Concrete screw | Home / Our brands / Spit / Spit fasteners and machine components / Spit fasteners / Spit screws / Spit concrete screw sr_no_br_cl_ns: 058661 sr_ns: SPIT058661
